After upgrading to OS X Mavericks, the recovery partition boot return with error

After upgrading to Mavericks, i tried to boot from recovery partition, but when it's booting error message coming up that i can not boot and show me options to view the log but only for 1 sec and then the mac reboot automaticly and i could not view the log. How can i fix the recovery partition?

Thank you, please check the output:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            120.5 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *157.3 MB   disk1
   1:                  Apple_HFS TeamViewer              157.2 MB   disk1s1
   Device Identifier:        disk0s3
   Device Node:              /dev/disk0s3
   Part of Whole:            disk0
   Device / Media Name:      Recovery HD
   Volume Name:              Not applicable (no file system)
   Mounted:                  Not applicable (no file system)
   File System:              None
   Partition Type:           Apple_Boot
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 PCI
   SMART Status:             Verified
   Volume UUID:              4C353E82-8BCC-335F-BD06-8A2AB21222BA
   Total Size:               650.0 MB (650002432 Bytes) (exactly 1269536 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        512 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                No
   Whole:                    No
   Internal:                 Yes
   Solid State:              Yes

Similar Messages

  • Can't create a factory recovery disk using the recovery partition that came with my computer

    When I push the Q: recovery drive> Create recovery media, I get a message saying 
    "Windows cannot find 'C:\Program Files (x86)\Lenovo\factory recovery\recovburncd.exe'. Make sure you types the name correctly, and then try again."
    How do I go about fixing this and creating a recovery disk?

    You can purchase replacements from AppleCare:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.
    However, you might want to consider upgrading to Snow Leopard - $29.00 at any local Apple retailer or the Online Store. This may actually be less costly than purchasing replacement discs, although the replacement discs will have the Apple Hardware Test that is not going to be on the Snow Leopard DVD, nor will any of your pre-bundled software.

  • After upgrading to OS X Mavericks syslogd needs lot of memory and cpu, system is very slow

    After upgrading to OS X Mavericks the system is very slow. securityd and syslogd are using 50% of cpu and memory is also used by syslogd and kerneltask (8 GB out of 12). After rebooting the system it runs very well, a view days later (without reboot, only hibernating) the situation is the same.
    Looks like a problem in OS X. Any solutions?

    I haven't worked out the LDAP messages but I noticed at other times I was seeing lots of album art messages from BlackBerry desktop. I'd already uninstalled the app but it still had processes running. I followed this link to remove completely; http://apple.stackexchange.com/questions/57023/how-to-uninstall-completely-black berry-device-manager
    CPU levels have been noticeably lower ever since.

  • Okidata printer errors after upgrading to OS X Mavericks

    Immediately after upgrading to OS X Mavericks, when I try to print with my Okidata C330DN color laser printer will NOT print in color.
    I get this message:
    "The Print Dialog Extension could not be loaded because it has not been updated to run in this application's secure environment".
    I contacted Okidata, who said "give us a week" to update the driver.  Well, they updated their driver, I just installed it, and get THE SAME ERROR...

    This is because of sandboxing, and Okidata will need to release another driver that handles these permissions issues. You can try printing from a non-sandboxed application like Safari, if that helps.

  • After upgrading to OS X Mavericks Time machine stops working

    After upgrading to OS X Mavericks Time machine stops backing up and sometimes hangs on ,,preparing,, for o days and sometimes stops inmediatly. Report says:
    Backing up to /dev/disk1s2: /Volumes/Backup/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[__NSArrayM objectAtIndex:]: index 0 beyond bounds for empty array'

    Is this a Firewire or Thunderbolt connected disk?  There are know issues with that in Mavericks.  If so try connecting the drive by USB as you continue.
    Is it a WD drive?  There appear to be issues with those drive on Mavericks.
    Time Machine Troubleshooting
    http://pondini.org/TM/Troubleshooting.html
    A4 - Full Reset of TIme Machine

  • Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks, Epson Stylus Photo T50 is idle after upgrading to OS X Mavericks

    Hello,
    I have an Epson Stylus Photo T50 and after upgrading to OS X Mavericks it does work and is idle the whole time.
    I'm from Brazil and would like to know if an update comes out soon or is there another solution for my case?
    I'm waiting for aid

    You probably need an updated driver:
    Epson drivers for Mavericks:
    http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

  • My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    My mail messages are blank after upgrading to OS X Mavericks. How do I fix this??

    Hi, I had this same problem. I have a load of work subfolders and was showing the message header but no content. I think it lost the link to the original messages.
    There may be a simpler way but I fixed it by going to the mail folders in finder. I took the following steps:
    Go to user library (hold down the alt key whilst clicking the Go menu in finder to access user library)
    Go to user/Library/Mail/V2/Mailboxes. You should be able to see your mailboxes and your original messages (ending .emlx) after clicking down the hierachy in each mailbox. For some reason mail added a "-2" onto the end of each mailbox which I think has caused the problem.
    Copy each required mailbox (.mbox) onto desktop. I removed the "-2" at this stage to clean things up.
    In Mail, choose File/Import Mailboxes....
    Import data from: Apple Mail. Click continue, navigate to desktop and choose the relevant .mbox folders. Click Choose.
    It should then import the mail to a new folder called import in mail. You can then rename that folder or move the subfolders out.
    I moved the .mbox folders on my desktop to my documents folder as a backup just in case. I then deleted the problem mailboxes from the finders mailboxes folder.
    Problem solved - for me anyway!!
    Hope this helps.

  • I am using macbook air, after upgrading to os x mavericks, i am not able to mount my 1 tb seagate go flex hard drive , any solutions , also iPhoto is not upgrading , every time i try to upgrade, it shows an error.....

    i am using macbook air, after upgrading to os x mavericks, i am not able to mount my seagate 1 TB go flex hard drive, also iphoto upgrades crashes mid way ... what to do ?

    What exactly crashes?  iPhoto upgrades to a library or the application? 
    What format is the external HD?
    OT

  • Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5

    Itunes freezes after upgrading to OS X Mavericks v10.9.3 on connecting iPhone 5.
    I tried it with a differnt Iphone and the results are the same. Any suggestions?

    Hi JZN1994,
    Welcome to the Apple Support Communities! I understand that after updating your computer to 10.9.3 iTunes stops responding when an iPhone is connected to it. There may be few different steps you will need to go through to get this resolved. I suggest working through the steps in the attached article.
    iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ts3219
    Thanks for reaching out, 
    -Joe

  • My Dock icons looks garbled after upgrading to OS X Maverick.

    My Dock icons looks garbled after upgrading to OS X Maverick.Not all but most of them look like scattered dots instead of the icons, tried restarting multiple times still no use.
    I installed OS X Maverick last week and for a week it looked fine. I have restarted the OS for copule of times after upgrade. Now the Icons in the dock seem to be garbled.

    The dock preferences may be corrupted ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.dock.plist
    Click Go then move the com.apple.finder.plist file to the Trash
    Restart your Mac.

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • After upgrading to iOS 8.3, the keyboard has frozen up  and I can no longer text or access my contacts.  I've re-booted the phone several times, to no avail.

      After upgrading to iOS 8.3, the keyboard has frozen and I can not longer text or access my contacts.  I literally just upgraded to an iPhone 6, but I'm just about ready to can this phone and go with an Android.  Can anyone help or have the same issues?

    Im having the same problem. This started with iOS 8 and Yosemite. Im in a group message with 10 people with and without iPhones. Currently have 9 threads and when ever a new person responds a new thread forms. they all have the same people but in a different order, that may be part of the reason why iMessage doesn't recognize them as the same conversation.
    As I'm writing this post 3 new threads opened and other people with and without iPhones are mentioning the same problem
    hope apple can fix this. VERY annoying

  • HT4528 after upgrading to IOS 7.1 the camera on my 5s no longer works

    after upgrading to IOS 7.1 the camera on my 5s no longer works.  Prior to the upgrade, I had no issues with the camera

    Hi JoieC,
    If you are having issues with the camera on your iPhone after a recent update, you may find the Camera troubleshooting portion of the following article helpful:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Regards,
    - Brenden

  • Since I upgraded to os x maverick when I try to close with cmd + q from the drop-down menu the app store and I IMOVE reopen continuously.

    since I upgraded to os x maverick when I try to close with cmd + q from the drop-down menu the app store and I IMOVE reopen continuously.

    2 GB of RAM is pretty tight. I imagine that's at the very low end of what Yosemite wants, which could slow things down.
    As far as scroll direction, you can always change it in the trackpad settings. Unsure why it got flipped, but you can fix it in about 5 seconds. Choose "natural" (or don't) depending on how you like it.

  • After upgrade to ios5, none of the apps will load.  Touching an icon does not open the app; it just blinks and returns to the screen.

    After upgrade to ios5, none of the apps will load.  Touching an icon does not open the app; it just blinks and returns to the screen.

    Go to the App Stor and download an app- any free app will do, it doesn't matter.
    Doing this usually "resets" your device's "app awareness" and you should be able to run any app with no problem.
    And no, you don't have to keep that free one you just downloaded.  You can delete it if you don't want it.

Maybe you are looking for

  • The Search is taking much time sometime and most of the time working fine

    Hi Expert, i have a Offer 41000630set to "final contract" by the F&C and saved, the F&C clicked on "more" and "Update Quantity Contract". We saw the "doughnut"more than minutes before we were presented with the EMPTY list of possible QCs for about 9

  • HP probook 4720 graphics Blue screen of death

    I have an HP probook 4720s (Product #: WT238EA#ACQ). I have upgraded my RAM to 6GB. My problem. The other day I was busy playing a game when the computer froze and then turned off while it was turning off a small blue screen briefly appeared. I resta

  • Power button not working like it should...

    When booting up, I have to press power button several times. Finally, when it does come on (Pavilion dv6Notebook), the fan runs quite a bit. I am worried my hard drive is about to go. Any tips?

  • Scripts to notify stop and start of services

    dear all,              i m looking for a script to send me a mail whenever oracle apps service is shutdown and start.your help will be appreciated thanks in advance. os:rhel6 ebs :12.1.3 db:11.2.0.3

  • PSE 7 not opening

    im currently using pse 7 and everytime i try to open the edit function i get a message saying pse has stopped working. it always stops when it says "building twain menu items" ive tried uninstalling and reinstalling but nothing changed. All the other