After upgrading to QuickTime 7.1.2, I am unable to run QuickTime

I'm running a Powerbook G4 with OS X 10.4.7. I've already installed iTunes 6.
After using Software Update to get the latest QuickTime (I have the license to access Pro features), I am unable to run QuickTime. I get the following error:
You cannot open the application "QuickTime Player.app" because it may be damaged or incomplete.
I also tried to download it again from the Apple->QuickTime->Download page, but I get the same result.
Does anyone know how I can get 7.1.2 working or...
How do I go back to an earlier working version of QuickTime 7 Pro,
and,
Which version should I use (I'd also like to be able to use it with iTunes, which I have successfully used in the recent past).
Thanks,
Larry
Powerbook G4 12" Mac OS X (10.4.7) iTunes 6 installed

Have you tried Deleting the Mail Account and then Re-adding it...
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
From here > http://support.apple.com/kb/TS3899
More Info here > http://www.apple.com/support/ipad/mail/

Similar Messages

Hello I am using iPhone 5s but after upgrading to iOS 8.0.1 I am unable to signin my iCloud account ?

Hello
i am using iPhone 5s, but after upgrading to iOS 8.0.1 I am unable to sigin my iCloud account
whenever i try to signin it shows " verification failed" / " the password you entered in incorrect"
i changed by Apple ID PASSWORD three times and tried to signin but it shows same as above - verification failed / password is incorrect
please suggest
regards
karan deep singh

I believe that all iPhones, purchased in Egypt, from official sources, are sold as carrier locked. So, your phone was hacked by someone so you could use it in Germany. Sorry, but that's what happens to hacked iPhones.
No one here can help you, nor can/will Apple, and since none of the carriers in Egypt offer official unlocking, your choices are not good.

After upgrading to OSX 10.6.8 I am unable to burn a CD. Is this normal or is my drive done?

After upgrading to OSX 10.6.8 I am unable to burn a CD. Is this normal or is my optical drive done?

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

TS2755 After 'upgrading' to iOS 7.0.2, I am unable to send or receive photos in iMessage. With the previous iOS, it was no problem. Is there a fix? Apple support is the usual 'black hole' that ***** up endless time.

After 'upgrading' to iOS 7.0.2, I am unable to send or receive photos in iMessage. With the previous iOS, it was no problem. Is there a fix? Apple support is the usual 'black hole' that ***** up endless time.

Apple guys are deleting posts. I have found my posts have been deleted. Apple should MUST let us downgrade at least to previous release from current which was working fine.

TS1347 after upgrading to iOS 7.0.4 i am unable to sync my contacts in Outlook

After upgrading to iOS 7.0.4 i am unable to sync my contacts in Outlook. Help!
Thank you,
Victor

My phone has just done this for the second time, the first time it was in warranty and apple replaced it for free. It has now happened again and as the warranty is finished I'm being told it will cost £115 to fix (replace again) I've given up and I'm now getting a new phone.

Problems after upgrading to Quicktime 7.1.3 from 7

After upgrading to QT 7.1.3 images that were fine before in videoclips, still shots and content in webpages now have a faint Q with a ? in the middle. On my daughters myspace page some of the clips and images she had uploaded, now show this too.
I tried to restart, I also just tried upgrading to QT Pro to see if that help. NOPE.....
PLEASE HELP
G4 Mac OS X (10.3.9)
G4 Mac OS X (10.3.9) Lacie DVD drive , HP 7310 all in one, G drive 250GB external

check my posting. I went back to flash 8.022 and most things started to work again....
QT logo with Question Mark and Blank screen sound ok on training videos
Posted: Mar 19, 2007 12:35 AM
Reply Email
I suddenly had all sort of problems (before 10.4.9) with QT logo and Question Marks throughout all browsers and also suddenly unable to continue training programs using files such as "avibasicmono.htm" and "introbasicmono.htm" .
finally think I have solved the QT logo by replacing Flash 9.0 with the old 8.022.
I could now also see current issues of magazines again on a site www.picturebusiness.uk.com (weird naming).
however I am not able to see the training videos at all but I hear the AVI files
Macosx 10.4.9 Quicktime 7.1.3 (removed 7.1.5 to try that option did not work)
will stay with what works until I hear more...

PC crashing after upgrade to Quicktime 7

Win XP home edit SP2
.MOV files played satisfactorily on Quicktime 6 but after I upgraded to Quicktime 7 the system would crash (blue screen) on attemting to open any .MOV file. The crash message was KERNAL STACK INPAGE ERROR STOP: 0x00000077. AVI files would play OK in Win Media Player or Real Player but with QT7 resulted in another fatal crash "A processor or thread crucial to system operation has unexpectedly exited or terminated" STOP: 0x00000F4.
QT7 was unistalled and reinstalled twice (the second time checking the registry for remnants before re-installing) but there was no change. Finally I tried unistalling QT7 and installing Quicktime Alternative - again still the same crashes. A month was spent discussing this on Windows Forums. Finally I found an old download of QT 6 so I unistalled QT7 and installed QT6. It works perfectly again.
I have learned one lesson. Always create system restore points before upgrading and be prepared to restore back if the upgrade gives trouble. XP Restore back does not touch data or emails - just systems.
Has anyone else experienced the same difficulty with QT7 in Windows XP?
Nigel

Please could you explain how minidumps are collected? All I did was run dxdiage.exe after one crash and I have saved the text output.
okay, if you're interested in trying an upgrade again, let's set up the PC to collect minidumps. then, if the blue screen hits you again, we can send through a minidump to the Apple engineers for a look.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
collect the minidump, and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of QuickTime you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Cant play Quicktime files in IE7/Firefox After upgrading to Quicktime 7.5.5

After upgrading to 7.5.5 I cannot view quicktime files on the apple site using internet explorer 7 or firefox 3.01.
I've uninstalled/reinstalled/rebooted etc but no change.
Any clues? am I all alone here?
Message was edited by: timsmyname

Anyone with answers please reply because I am suffering from the same problems after reformatting and reloading OEM software and upgrading to current. I thought she had gotten infected from chain emails because of repeated blue screen shutdowns only to find that Quicktime 7 is causing the conflicts.

After upgrading to OS 10.8.5 I am unable to sync iCal to Nano

I am no longer able to sync my nano device with my calender on my computer. I've noticed this after upgrading to OS 10.8.5 (Mountain Lion). I've tried adjusting the settings on the nano device via itunes, but no luck. Please give me some helpful suggestions. Thanks.

I'm almost completely certain that the scanning feature worked before the update. Having said that though, I don't scan a great deal and it may be the case that when I have done, the printer was directly connected to the MBP. However, since I have a laptop it's far more logical that I would have had the printer connected to Airport Express for reasons of portability so I can't really see that I would have had the printer connected directly to the laptop. Besides this, I have no memory of having this problem previously. Therefore, I don't think my memory is to blame although of course, if it were I'd have no way of knowing!
J.

After upgrading to itunes 7.3.1.3 I can't run the backup to dics anymore.

After upgradeing to itunes 7.3.1.3.1 I can not run the backup any more. Also the CD burning runs very slow.
The DVD burner run ok with other software.
After it checks for file to be backed up it kept ejecting the blank DVD and asking for a blank disc.
I have even replaced the DVD drive with drive from another computer.I also reinstalled ITUNES once-- It ran as a repair during the install.

I have used this same DVD Burner to backup my list from within iTunes before. I did this back in June just after I purchase 30 songs. I think I was running version 7.1 or 7.2 when the DVD backup worked. If not sopport then why does their diagnostics say DVD/CD Diagnostics. Even so I have the same problem on my other PC with a CD Burner. I think Apple support sound a little like Microsoft. I once had a problem with Windows NT and had to call MS support 5 times before they said their software had a defect and issued a patch.

IChat bandwidth problem after upgrading to Quicktime Pro 7.1

I just updated Quicktime Pro 7.1 (from 7.0) and applied the Security update to my iMac G5 1.8 GHz.
My girlfriend and I have been chatting with no problems. She's running an new iMac Dual Core and I have an iMac G5 running 10.3.9. We tried to hook up tonight and kept getting this error:
2006-05-11 21:41:51 -0400: There is insufficient bandwidth to maintain the conference.
Detected 48 kbps upstream and 162 kbps downstream bandwidth; 50 kbps required.
We're both on Cinti Bell's Fuse/Zoomtown ADSL so we have plenty of bandwidth. Set iChat bandwidth to None and st Quicktime to 1.5 Mbps T1/internet/LAN.
Any ideas why, after a month of no problems chatting, this bandwidth issue has come up? She's running 4.5 (hasn't upgraded and hasn't sone the just rreleased security update)?

OK - My gal is here for the weekend so it will be next monday evening before we can toubleshoot as I don't know any other place where I can find someone to video chat with for testing purposes. We're using AIM accounts, but like I say, before the upgrade I did it was working fine. I've been through most of the 'usual' from rebuilding permissions, diskwarrior to ensure the disk is OK. Next week I'll trash preferences and such when we troubleshoot.
I appreciate the response. If I find anything out I'll update this thread.

No audio on finished DVD or disk image after upgrade to QuickTime 7.1.3

I have iDVD 6.0.2. I routinely burn iMovie output to a DVD a couple of times a week. Yesterday I was getting ready to burn a DVD and got a software update alert for QuickTime. I installed 7.1.3. The DVD I burned after that update doesn't have audio. I deleted the encoding and made a disk image. No audio on that either. Until the QT update I had never had any problem burning DVDs. The iMovie output plays fine in iMovie and iDVD. The only plugin in my libraries is AppleIntermediateCodec.Component (v1.1).
Thanks for any help!
MacMini G4 1.42 ghz 512mb Superdrive Mac OS X (10.4.7)

I also had an audio problem with a iDVD6 for project I was working on last week (I have latest QT update). I added 2 different iMovie projects into iDVD6 Dual Layer project using submenu pages. Total size from Project Info was close to 7.7 GB limit using 'Best Performance' option. I selected 'Best Quality' option and it showed over 4 GB. I used this option and saved a disc image of this project. After done, I relooked at DVD size from Project Info and it now showed close to 7.7 GB. When I opened image file with DVD player, first movie played fine with audio. The second movie had video, but no audio.
After skimming some of the posts in this discussion group, I found one suggesting that if audio problem occurs, export your iMovie project with transitions, etc, as full quality DV, then bring back in as new iMovie project and re-establish chapter markers. I did this for the second movie only, and readded to original iDVD6 project. After recreating a disk image, I opened in DVD player and the video and audio was fine for both movies. Burned disk worked fine too.
Sooo ... if you have no audio problem with your iDVD6 project, if you recreate your iMovie project using procedure above and bring it back into iDVD6 project, maybe ... the audio might be there. At least it worked once for me.
If this trick works for anyone else, please post here for all to read.
Paul

Can't startup my iBook after upgrading to QuickTime 7.03

Help!!!!!!! I checked software update and saw that there were updates to iTunes and QuickTime yesterday. I downloaded iTunes and ran it just fine. When I downloaded QuickTime I had to Restart my computer. My iBook will not Restart. It gets to the Mac OS startup window and the blue progress bar moves all the way across. My iBook will not move past this screen. The blue progress bar is complete, but that window never proceeds to the desktop, so the computer cannot startup. Does anyone have an answer? I ran Disk Utility and corrected the Permissions and Repaired the disk. Only the Permissions needed fixing and I did that. Help me please. What else can I do?

Ok... I just tried connecting my iPod directly to a USB port on the computer rather than via the USB hub I was using and everything is fine. Odd, but I'm happy now.
Thanks,
Evan

Cannot install HP support assistant after upgrading to windows 7 error 1316

After upgrading to Win 7 from Vista I am unable to install the HP support assistant. First I get this error: Error 1316 The specified account already exists. After clicking OK I get the following error msg: Error: -1603 Fatal error during installation. Consult windows installer help (MSI CHM) or MSN for more info. This is then followed up with the following msg: HP support assistant not installed successfully. An error occurred during the installation: -3 Then it rolls back the installation and will not install. HP support assistant was working under Vista.

Crppy wrote:
After upgrading to Win 7 from Vista I am unable to install the HP support assistant. First I get this error: Error 1316 The specified account already exists. After clicking OK I get the following error msg: Error: -1603 Fatal error during installation. Consult windows installer help (MSI CHM) or MSN for more info. This is then followed up with the following msg: HP support assistant not installed successfully. An error occurred during the installation: -3 Then it rolls back the installation and will not install. HP support assistant was working under Vista.
Did you first go to the Control Panel and make sure that the HP Support Assistant software was not listed (uninstalled)?

Cannot sign in to iMessage after upgrading iPad to IOS 8.1.2

After upgrading to IOS 8.1.2, I am unable to login to iMessage. I receive an error saying check network connection, however I have a wifi connection and am able to access apple.com. Have tried toggling wifi on/off, no success.

Thank you SO much Stephaniefromlancaster -
I tried your solution and you're not nuts It worked!!!

After upgrading to QuickTime 7.1.2, I am unable to run QuickTime

Similar Messages

Maybe you are looking for