After upgrading to snow leopard my charger works intermittently, could this be a software issue or just a coincidence

Very likely this is a coincidence. Have you tried resetting your System Management Controller? That would be the best first step for any issue that has to do with power.
Best of luck.

Similar Messages

Slow/jerky transitions after upgrading to Snow Leopard

Hi,
I've just built a short iMovie and have noticed that my transitions (cross dissolve and cube) are very slow / jerky / not smooth after upgrading to Snow Leopard. Any one else having this problem?
Steve

Yes LS needs a update to work with the changes in 10.6.8, so does Parallels.
Read my backup, bootable clones, troubleshooting, performance, wifi security and restore info/advice here
https://discussions.apple.com/message/16276201#16276201

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

GCC Elite 21n+ Printer Stop working after Upgrade to Snow Leopard

GCC Elite 21n+ B&W Laser Printer no longer works after upgrading to Snow Leopard 10.6.2.
A back-up HP 2015DN Printer works intermittently. It will not work with ethernet cable connected to Net Gear Ethernet Hub (model FS105). But will work most of the time when ethernet cable is connected directly to back of computer.
Back to GCC printer. Just cannot get it to work.
But I cannot figure out what the IP address is for the GCC printer. Tried 192.168.1.4:9300
See post (discussions.apple.com/thread.jspa?messageID=10127869). Still did not work.
GCC tech have this work around. Here is what I received from GCC via email.
+At 01/02/2010 12:21 AM we wrote -+
+Since Apple has made the decision to eliminate Appletalk from it's Operating System, you are now forced to set the printer up over TCP/IP. Please keep in mind that GCC has never provided drivers for the Mac. We use the Apple Built in Print Driver. We do provide an OS X PPD Installer located on our website that I recommend you download, unstuff, install, reboot your Mac, then add the printer. You can find the Installer at http://www.gccprinters.com/support/doc/ Click on the Model of your printer and download the OS X Installer. DO NOT download the Applications Folder.+
+You will need to set the printer up over TCP/IP, which means you will need to pull the IP Address of the printer from the Printers Configuration Page. Once you've done that, please do the following:+
+You can add the printer over IP, that should work fine. Here are some steps for you to take.+
+1) Select 'System Preferences...' (4th item) from the 'Apple' menu. The 'System Preference' panel will appear as a new window.+
+2) Click on 'Print & Fax' icon (second row 'Hardware', second icon from right side). The 'System Preferences' panel will change into the 'Print & Fax' panel without opening a new window.+
+3) Click on the '+' button to add a printer (2/3 the way down on the left side on the 'Print & Fax' panel). The 'Add Printer' dialog will open in a new window.+
+4) Select the 'IP' icon in the top row of the 'Add Printer' dialog.+
+5) Next to 'Protocol' select LPD Line Printer Daemon.+
+6) Next to 'Address' type in the IP address you assigned to the printer. The Mac should prompt "complete and valid address".+
+7) (Optionally) Next to 'Name' set the name of the printer to something friendlier. Normally it defaults to the IP address enter in the previous step. The 'Name' is what the printer is called in the print dialog.+
+8) (Optionally) Next to 'Print Using' change/verify the PPD.+
+9) Click 'Add' in the bottom right corner. After a few moments the 'Add Printer' dialog will close.+
+10) The printer added in the previous step will appear in the list on the left side of the 'Print & Fax' panel. Click on the close box in the left-top of the 'Print & Fax' panel.+
+11) Done. You should be ready to print.+
Still cannot get the GCC printer to work or discover its IP address. Printer's Configuration page says
TCP/IP: Enabled IP address: Unknown subnet Mask 255.255.255.0
When I download the Drivers from GCC Web Site I only get a Text Document with loads of meaningless
gibberish. There is nothing to unstuff and install.
All worked well with OS 10.5.
Thanks for shedding any light.
John L.
Thanks,
John

Hello John,
At this stage you will not be able to get this to print until the printer has a valid IP address. According to your post, the IP address setting is enabled but the actual IP address is unknown. This is most likely a result of the GCC being set to DHCP but if there is no DHCP server or router capable of assigning the printer an IP address, then it will not get a valid address.
So, the first thing I recommend is you check the documentation for manually setting an IP address into the printer. This address needs to be in the same subnet as your Mac. If you check System Preferences > Network on the Mac, you will see your IP address and subnet mask. If the subnet mask is set to 255.255.255.0, then you subnet will be the first three sets of numbers. For example, a device with an IP address of 192.168.1.12 and a subnet mask of 255.255.255.0 has a subnet of 19.2.168.1 and a network address of 12. Ideally, so that other devices can communicate with this device, they also need a subnet of 192.168.1 but a different network address, any number between 1 and 250 but one that is not already being used by another device, such as 12 in this example.
Once you have the IP address set in the printer, then you add the printer as the GCC tech stated, using IP > LPD for the protocol. Note that you will only need to enter the IP address, such as 192.168.1.4 as per your post example. Don't enter any other numbers, such as the 9300 port reference you have tried already the colon after the IP address followed by the 9300).
For the Print Using, you can use Generic PostScript to begin with as a test. If you then wanted to use the GCC PPD, then the link is okay. When you select the 21+n the next page shows the 21+ installer for OS 9 and OS X. This is a stuffit packed file so you will need some form of Stuffit (Stuffit Expander is a free download) to unpack the file first. Once unpacked, there is most likely an installer that you run. This will copy the PPD files for the printer to the appropriate folder.
Hope this helps. Please reply if you require more help.
Pahu

Titles and Transitions doe not work after upgrading to Snow Leopard

I can not get my Titles or transitions to work in iMovie any more after upgrading to Snow Leopard.
Everything goes to a black screen. I am having problems with final cut express also. Anyone have an idea when there will be a patch to fix this? I would hate to have to down grade.

Holy *&$^, no kidding. I mean this is bad. I can't really do anything on iMovie at all. I really hope there is a simple solution to this, b/c if this really is part of a bad release, Apple will not hear the end of it.

FireWire 400&800 (IMAC Core2) NOT WORKING after Upgrading to SNOW LEOPARD!

My FireWire 400&800 (iMAC Core2) are *NOT WORKING* after Upgrading to SNOW LEOPARD!
Any Solutions?
Thanks!
--Frank Strallents
www.SHOCKPROOFX.com

I'll try your suggestions....Thanks!
Recently, I try to Re-install Snow Leopard, unfortunately, still unsuccessful.
The Mybook Icon only appears if it is connected via USB.
After using Firewire and getting used to the speed...USB 2.0 is like a Corvette racing a Veyron...lol
I am not upset on these issues, it is normal for new OS to have these problems...unfortunately, even OSX is not invincible.
I'm sure Apple/Steve is on every Programers A*s for a solution.
I still think APPLE'S OSX will still be the future of Operating system!
For now, still waiting for the patch and hopefully soon.
Suggestions are still Welcome for a Solutions:-)
Frank
SHOCKPROOFX.COM

My Creative SBS250 speakers no londer work after upgrading to Snow leopard. Where can I find the driverinstalling

My Creative SBS250 speakers no longer work after upgrading to Snow Leopard. Where can I find the driver? Thanks

Everyone in my household who has upgraded to Snow Leopard has had the same problems with program crashes and the computer "forgetting" registration codes.
In fact, after re-entering codes, and then upgrading to 10.6.1, we had to re-enter them again because it forgot (again) that we had bought/registered the software. It was a lot of fun digging through old emails and such looking for the codes, let me tell you.
I'm pulling a Vista and downgrading my computer back to 10.5.x. That was stable and remembered my software, at least.

After upgrading to snow leopard my HP C5180 printer will not allow me to scan to the computer, it only works as a copier?

Hello,
My hardrive crashed, replaced and reinstalled. However after upgrading to Snow Leopard v.10.6.8, my HP C5180 printer will not give me an option to scan an image to the computer. It only functions as a copier. Any suggestions are greatly appreciated!
Thanks

If your driver is up to date (you didn't say) then you can try Image Capture in your Applications folder or take a look at VueScan http://www.hamrick.com/

Greetings: I have just acquired an older mini mac (2006 1.66 ghz core 2 duo) Anyway, it had Tiger 10.4 on it and the Bluetooth worked. I upgraded to Snow Leopard and everything works fine - except Bluetooth. The Bluetooth icon isn't there. Any ideas?

Greetings:
I have just acquired an older mini mac (2006 1.66 ghz core 2 duo) Anyway, it had Tiger 10.4 on it and the Bluetooth worked for the wireless Apple keyboard and mouse. I upgraded to Snow Leopard and everything works fine - everything except Bluetooth.
The Bluetooth icon does not exist in the System Preferenc screen.
I tried to download Bluetooth from Apple site but the message I got told me that I didn't need it.
Under Finder, Utilities, I found Bluetooth File Exchange but the message I got was that I had to connect a Bluetooth device to my computer.
I have to admit that I have no idea what's going on here. I am hoping to avert the need to try another complete re-install of Snow Leopard.
Any ideas?
Thanks
javaminit

Puzzled is a polite word for it.
Thanks Barry - I found the file and trie to send it to trash. The response: (This item cannot be trashed as it it owned by the system).
After dancing around with PRAM and SMC and turning on while holding the power-cntrl-option-shift and heavens knows what else, I now have the Bluetooth symbol on the top of the menu bar but it is ghoseted and has a squiggly line through it. This, I didn't have before so I read this as some progress. It notes that "Bluetooth is not available">
However, the Bluetooth icon is still missing from the System Preferences window - you know, between "network" and "sharing".
You note that you reckon the issue is not software based and you may be correct. The reason that I wonder about that though, is that before I installed Snow Leopard, the keyboard and mouse both paired with the box under the Tiger 10.4. That leads me to conclude that hardware is functional and that there is some screwy little bit of software that is not cooperating.
If I could delete Bluetooth from the system and re-install a fresh version, that might help. Or, is there a way I can use the Snow Leopard install disc and only load in Bluetooth?
I'm stumped.
Thanks for your time
/Bill C.

After upgrade from snow leopard to lion, where is application front row?

After upgrade from snow leopard to lion, where is application front row? i realize it when to use my remote. any one knows about this matter?

OK - Fixed it.
Turns out the cure is to use the Webcal Interface to re-create the delegations. A bit tedious, but doing this presumably forces a rewrite of the file that previously cannot be accessed. Means you need to set up the delegation again for each account - but this at least is an improvement over not being able to do anything at all.
Once fixed, delegation works just fine.
Hope this helps someone else solve the issue etc.

Airport connections lost after upgrade to Snow Leopard

After upgrading to Snow Leopard, I am no longer able to connect to the Internet wirelessly. I have had to resort to connect via wired connection. I have tried to reconfigure the connection. It finds my wireless network, but when I type in my password it says it is not correct. I know it is an issue with Snow Leopard as it worked fine prior to the upgrade and my other devices connect with no problem.

Go into Displays Preferences and, if you haven't already done so previously, put a checkmark in the box for "Show displays in menu bar". Then, click on the resulting icon that shows up in the menu bar to drop the menu and select "Number of Recent Items" and set it to 10. Now drop the menu a second time and see if there are two 1920 x 1080 resolutions. If so, one of them may be the older one previously in use that was working.

App Launching Unresponsive After Upgrading to Snow Leopard

For reasons I do not quite understand, launching any app, and doing many things within them (basically, instantiating any process) is extremely slow after upgrading to Snow Leopard. For instance, opening a new window in Terminal takes a full 22 seconds (I've timed it) to go from "login" to the zsh prompt. Before, it was instantaneous. There is nearly nothing installed on this computer other than the bare essentials and some documents.
This is obviously very frustrating and detrimental to my productivity. Here is what I've tried:
- Reinstalling from scratch (I've now tried this two times). First, I backed up my home directory with SuperDuper and manually copied everything over. Everything was fixed, for about two days, and then it started doing the same thing again. Then, I cloned the entire disk with SuperDuper and restored from it. Again, everything was fixed for a little while and then I had the same problem again.
- Most recently, I tried "Verify disk" in Disk Utility. This returned that there were errors (an "invalid directory count"). Therefore I rebooted into the installation disc and ran "Repair Disk", which outputted that the disk was repaired successfully. However, I rebooted back and now have the same problem.
Does anyone have any suggestions as to what is going wrong? My first thought was that perhaps the hard drive is failing, but I've dual-booted Linux on another partition and it works fine.
I am very confused. How can I fix this?

Have you updated iTunes?

Unable to print after upgrading to Snow Leopard (Dell 1320C) - Network

This recently started after upgrading to Snow Leopard.
The OSX drivers worked well with Leopard 10.5.xx but after upgrading to Snow Leopard, i keep getting "network host busy" or "could not connect to printer".
I've tried completly removing printer, reinstalling (IP based), drivers etc etc I even resetted the printing system (right clicking and reseting in the printers list).
This works fine with Leopard but it fails on Snow Leopard..

I had the same problem not being able to print to Dell 1320c after upgrading to Snow Leopard. Here is a work around for the Dell 1320c printer to work on Mac with Leopard 10.6.2
Do not use the printer driver from Dell. Delete the Printer Setup from your Mac.
Locate Mac Driver Suitable for 10.5 (Version 1.7) at http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5452&categ ory=5726
Double click the icon to install after it downloads. It should create file DPC525AAPv17x5.dmg. When the install is finished you can delete the installer.
From the Apple menu open System Preferences and select Print & Fax.
Click the + to add a printer.
Select IP Printer.
Select for the Protocol: Line Printer Daemon - LPD
Type the IP address: 192.168.1.xxx or whatever your printer is assigned on your network. (If you don't know, go to your printer and hold down the Green button until the configuration sheet prints. You can see the IP address once printed.)
Name the printer "Dell Color Laser 1320c" or whatever you'd like to call it.
For Print Using select: FX
Next select FX DocumPrint C525 A-AP v1.7 in the box below.
On the next screen you must select 250 Sheet Feeder as an option. Otherwise it will only be able to manual feed.
Click Ok.
Go to Print something, File... Print... but don't click the Print button yet.
Under Pages: go to the Drop Down and select Fuji Xerox Features.
Find the Paper Source Drop Down and select Tray 1 (250 sheets),
then go up to Presets: Drop Down above and select Save As...
and under Preset Name, type Standard-1, leave This Printer Only and click OK.
Now you can click the Print button. This will set the Dell 1320c printer to print from the document tray and not try to manually feed all the time.
Anyway, that's the work around to use the Dell 1320c Color Laser printer under Mac OS Snow Leopard 10.6.x.
Hope this helps!
Good Luck
P.S. I guess eventually Dell might come out with an updated driver, but don't hold your breath...

After upgrade to Snow Leopard temperature rockets skyhigh

Hi everybody,
After upgrading to Snow Leopard, and further to the dot 1 release my iMac runs so hot that it starts to smell. the power supply temp goes to 95 Celsius. It used to stabelise on 75 Celsius before the upgrade.
Fans don't seem to kick in anymore. I shut down after every two hours or so to avoid damage.
Apart from that SL runs fine. I read the other posts abt temperature, but awaiting a real solution.
Thanks,
Rob

Go into Displays Preferences and, if you haven't already done so previously, put a checkmark in the box for "Show displays in menu bar". Then, click on the resulting icon that shows up in the menu bar to drop the menu and select "Number of Recent Items" and set it to 10. Now drop the menu a second time and see if there are two 1920 x 1080 resolutions. If so, one of them may be the older one previously in use that was working.

Can't open Pages after upgrading to snow leopard on 10.6.8

Can't open Pages after upgrading to snow leopard on 10.6.8

Has Spotlight finished its indexing? Check in the upper right. If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

After upgrading to snow leopard my charger works intermittently, could this be a software issue or just a coincidence

Similar Messages

Maybe you are looking for