After upgrading to version 4.0 my email money bank transfers do not work. Bank says it is browser issue but what is the setting that needs to be changed?
I do a great deal of online banking. Recently issue an email money transfer from an account with one bank to an account with a different bank. Have done this regularly in the past with no problems. The transfer could not be completed. After consulting the IT people at the bank I was advised the problem is with the browser, but they were not certain of what specifically is the problem or how to fix it. They advised I try to do the deposit using another browser. Went to Chrome, accessed the email transfer info and the deposits went through normally. I assume the problem lies somewhere in the security settings with Firefox, but could not find any information to help me.
I too , have had my phone crash after installing the iphone 4 update. It would not update and connect to itunes after installing it. My phone was not accesable at all.
I took it to the apple store in London and for an hour and a half waited for them to resolve the issue.
They seemed far more interested in selling their new iphone 4 than helping existing customers.
I was told it was a physical connection problem cord. I knew this was not the case and as I had my laptop with me proved it wasn't.
After 2 hours they replaced the handset and I am now in the process of restoring the backup.
I strongly advise not to install the new software.
GET YOUR ACT TOGETHER APPLE!!!!!
Similar Messages
-
After upgrading to OS 10.9.1 Aperature 3.2.3 does not work and I have not been able to download upgrade of Aperature?
Is Aperture installed in the "Application"s folder and simply named Aperture? If not, move it back to "Applications". Did you buy Aperture from the App Store or as a boxed Retail version?
Relaunch the App Store and sign in with your Apple ID (in the Store menu). Reload the "Purchased" page of the App Store. Do see Aperture on the Purchased tab or perhaps the "Accept" portion of the "Purchased" page? If in the "Accept" portion, accept it to your AppleID and install it. Else look again at the Update page.
For some forum members the update did only appear until after setting the primary system language to English and rebooting the Mac. This bug is supposed to have been fixed with the update to 10.9.1, but try it, if all else should fail. -
After "upgrading" from trial to FCPX 10.0.3 multi cam does not work
After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
When I double click the multi cam clip I see all four angles in the timeline, one underneath the other...
Any help is appreciated! Thanks!There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
in the iTunes Store.
The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
Can't recommend them enough. -
Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?
I can't help you with a direct answer. For third-party devices you should contact the vendor (Vodafone).
If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service. -
From the day I bought it I realized the phone heats up after a little use. It gets really hot while using Wifi and downloading. Anyone else having these issues? What's the solution to this?
Your VGA is definitely corrupted and it is irreparable, so just make the HP to change your vga.
Also next time read my post on how to keep your laptop cool to avoid same issues again.
I assume your laptop was pretty hot during some time and that's the result you've got.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks" -
After upgrading Exchange Server 2007 to SP3 with update rollup 13, OWA not working
Hi,
We have just installed Service Pack 3 and update rollup 13 on our Exchange Server 2007, but unfortunately our OWA has gone inaccessible.
PROBLEM- The following error comes up when we try to access OWA :
Exception
Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaInvalidConfigurationException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
Microsoft.Exchange.Clients.Owa.Core.Globals.InitializeApplication()
Microsoft.Exchange.Clients.Owa.Core.Global.ExecuteApplicationStart(Object sender, EventArgs e)
Inner Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.Configuration.CheckPublicFolders(ADSystemConfigurationSession session, ADObjectId[] pfdbIds, Boolean& allLegacy, Boolean& allLater)
Microsoft.Exchange.Clients.Owa.Core.Configuration..ctor(ADSystemConfigurationSession session, String virtualDirectory, String webSiteName, ADObjectId distinguishedName, Boolean isPhoneticSupportEnabled)
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.LoadConfiguration()
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
ACTION TAKEN SO FAR :
1. Removed OWA virtual directories and recreated them again.
2. IIS has been reset.
3. Restarted the HUB/CAS server.
4. Created public folder database.
Even after doing all these activities, owa is still inaccessible. Please help.
Regards,
AnkurHi Ankur,
From your description, you can't access to OWA after upgrading Exchange server 2007 to SP3 rollup 13. Firstly, please locate to C:\ExchangeSetupLogs and make sure that it is a successful installation. If not, this issue often occurs.
If it is a successful upgrading, please follow the steps below for troubleshooting.
1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your
https://URL), check "Only redirect" box and Status code Found 302.
4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
All I want to do is make FireFox my default browser for everything. Right now the email program is using Chrome, it didn't use to do this. It used to be FireFox and I want it back...
To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step. -
When opeing my email on my macbook pro some of my email messages show up in the middle of the screen..others show up all the way to the right. I want all of the emails to show in the middle of my screen. Is there a setting to change? Right now I have to open..close and then re-open some messages to get them to show in the middle of the screen. Thanks.
No.
Try this:
Open one email.
Adjust size and position.
Close your mail application.
Future mails should open as per the last email until you change it.
The same is so for Safari windows. -
I installed photoshop cc 2014, but Camera Raw remains on Version 8.0. Update to 8.5 does not work.
I installed photoshop cc 2014, but Camera Raw remains on Version 8.0. Update to 8.5 does not work.
Solved in this way:
Close Photoshop first, then:
Download the 8.5 manual update link from here: Don't run the installer, but instead just Open the zip file in Windows Explorer.
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.5.50/setup.zip
Navigate inside the zip file to find the resources inside that correspond to the 64 or 32 bit Photoshop version that you're running. I assume you have installed the 64 bit version, so the rest of the instructions will concentrate on the 64 bit Camera Raw.8bi only. Here's the path:
setup.zip \ payloads \ AdobeCameraRaw8.0All-x64-050614143245 \ Assets1_1.zip
The file within Assets1_1.zip, named 1002, is actually the Camera Raw.8bi file for 64 bits, just with a different name.
Copy 1002 to your folder on your computer where your Camera Raw.8bi normally lives, e.g.,
C:\Program Files\Common Files\Adobe\Plug-Ins\CC\File Formats
Rename the old Camera Raw.8bi file to Camera Raw.8bi_8.0. It's important that the extension is changed to something other than .8bi.
Rename 1002 to Camera Raw.8bi
Run Photoshop and verify the Camera Raw version by choosing Help - About Plug-in... - Camera Raw.
Thank you so much! -
Texts are not showing up after upgrading to version 11
Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?This is a known issue and we have a fix for this in our next release. Thanks for posting.
-
After upgrading to Mountain Lion my deleted emails keep coming back. I cannot get rid of them.
After upgrading to Mountain Lion my deleted emails keep coming back. I cannot get rid of them.
Hello waybk,
Thank you for using Apple Support Communities.
For more information, take a look at:
Configuring Mail for your email account
http://support.apple.com/kb/ht1277
Check if Mail> Preferences>Accounts> and set the Mail to Delete from the Server
Have a nice day,
Mario -
After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.
One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time. -
Z10 not able to call oversea after upgrade to version 10.1.0.273
I live in Thailand and I usually make call to Malaysia using 009 service from CAT. The full number will be 0096057163xxx and I have been using 009 services for more than 10 years. After upgraded to version 10.1.0.273, I'm not able to make oversea call with 009 services. The reply is "The number you are calling is not in service", I try call with other mobile phones and everything work as per normal. I doubt the the latest version are not able to read and dial the first 2 digits "00". Please help to provide a solutions.
Checked with BB call center Thailand and they have not received similar complain from other customer, no solutions neither. I try making oversea call with 001, 007 and 008 follow by country code, all having the same problem. Especially for 008 follow country code 60 (Malaysia), it ends up calling to China. It seems like the firmware do not recognized the 3rd digit as it read it as 'country code' instead of international call service offer by CAT Thailand. This is really PISS me off and I hope RIM can do something about it!!
-
I am using ArcGIS 10 and Firefox 6 on Windows XP.
After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). Any ideas of what could be causing this? I have also posted on the ArcGIS forum site for input from that side.
How can I downgrade to version 5? If that is the only option available.Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
It doesn't help. The things it says to look for aren't there for me, specifically:
browser.download.pluginOverrideTypes
plugin.disable_full_page_plugin_for_types
I followed the rest of the instructions but it didn't help.
I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
Any other ideas? -
After upgrade to version 20, we receive the following error when trying to open a website:
Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202)
Everything worked fine in the previous version of Firefox.Found the fix for this:
Just set the following values to false in about:config.
network.automatic-ntlm-auth.allow-proxies
network.negotiate-auth.allow-proxies
Maybe you are looking for
-
How do I clear the list of updated apps on iPad?
I recently updated to iOS 7 on my iPad 4. Using the APPS icon, I can see what apps have been updated. However, I cannot find any way to remove them. Will they stay there permanently? Previously if I opened them, the app would be removed from the upda
-
Downloading BLOB to a file using pl/sql toolkit
Created an Oracle Reports RDF file using the reports builder (9.0.2.x). Uploaded the file into the database in a BLOB column using the following code: >>>> SET VERIFY OFF DECLARE p_bfile BFILE ; p_blob BLOB ; BEGIN p_bfile := BFILENAME('CDR_REPORTS',
-
When I ungroup a group, it disappears only to be found on another page
When I ungroup a group, it disappears only to be found on another page (I assume it is the page I grouped it on). This has only just started happening. Is it an update, or a preference I have changed?
-
TS1702 One track of an album seems to have gotten deleted. How do I get it back?
One track of an album seems to have gotten deleted. How do I get it back?
-
Active X and something machine?
My cousin has a web cam and it will not work and he thinks i need to get active X and something machine? i dont really remember but there are so many java's i dont know what to pick... can someone help me? am i even looking for the right things? wher