After upgrading Wifi is extremelly slow while using batter

After updating to Windows 10 my wifi only works while hooked up to power. While in battery mode it will go part of the ay to load and then stop. It slows down to a crawl, worse than any dial up speeds. If I reconnect the power it goes back to the correct speed.

SAP just delivered a note to fix this issue. The number is 2022294.

Similar Messages

ARM approval error after upgrading to SP14: Database error while using the secure store.

Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
Gustavo

SAP just delivered a note to fix this issue. The number is 2022294.

After upgrading to mountain lion I cannot use my HD TV as a display through my thunder port and HDMI cable ???

after upgrading to mountain lion I cannot use my HD TV as a display anymore using thunderport and HDMI , which worked before , does this mean I have to buy apple tv to mirror onto my HD TV

can it be something related to wi-fi? I have read other posts talking about loss of connection using wifi. I'm connecting my G5 through an airport express which is expanding my wifi generated from my Apple Time Capsule. It is quite difficult for me to relocate the server close to the Time Capsule and vice versa but if it works, at least that would be something. It was working with Lion about 3 months ago - showing up in Finder, etc.

Hi, after upgrading to 5.1 I cant use my ethernet cable any more

Hi, after upgrading to 5.1 I cant use my ethernet cable any more for air play or photostream. If I use Wifi instead it works!. Seems like a bug in 5.1. Anyone with similar issue?

FIxed my problem!
Go to System preferences
Go to Ethernet
Go to Advance
Go to Hardware
The just make the changes like in the pictures below
it work for me

After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad. I need help

After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
Please help!

After upgrading to YOSEMITE, I tried to use Airdrop between my iMac and iPhone 6 Plus but they don't recognize each other. It also didn't recognize my iPad.
Please help!

After upgrading to Lion, not able to use Quicken 2007. Get the following message: PowerPC applications are no longer supported. Anyone has a solution?

After upgrading to Lion, not able to use a PowerPC Application (Quicken 2007). Any solution?

Quicken Essentials 2010 has less features than Quciken 2007. Keeping track of investments is one feature I need and Quicken Essentials does not include that function. I may have to consider others financial software, such as iBank4, Money4, iFinance, and Money Well.

Problem with InDesign CC redrawing the screen too slow while using Zoom tool

Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).

Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally.

My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked?

My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, I call apple support and they told me to bring it in but the nearest store is about two hours away. They said I need it to erase my hard drive but I have too many family pics on it.
would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked on it? I could replace the internal and get an enclosure for the original until I get the pics out of it?
Please advise, it's like five years of family pics I don't wanna loose them and I am worried.
Thanks
Al Florez

A Brody,
I really apprecate your very quick respond, Its too late to back up as of now, my hard drive wont load at all so I cannot follow your instruction to back it up. Learn a hard lesson but I will from now on following your link.
Also my hard drive it is not available to do the free exchange program.
I read the OWC instruction on how to replace the drive I was just wondering if the 2TB would work on it instead of the 1 TB they offer, I specifically asked for the Seage Barracuda because I had great experiences with it on PCs.
Again, Thank you

HT4718 after upgrading to Mavericks, i can't use Pro Tools ***

after upgrading to Mavericks, i can't use my pro tools, and none of my iTunes files are there. what the ****? I want to revert back to snow leopard.
PLEASE ADVISE!!!! I'm in a panic!!
I was very happy with Snow Leopard, and then I tried to get an app to design my Christmas cards. The computer told me, i had to upgrade to Mavericks to use it.
Now everything is a complete disaster!

I was not prompted to make a clone, so i dont have one. I downloaded an upgrade of pro tools that is alleged to work with mavericks, but it does not.
I can't find any of my music files, iTunes downloads, documents, etc... But, all the software i purchased to work within pro tools is there. Im so confused.
Im PC, i have never downloaded an upgrade that made all my files disappear. This is totally unacceptable.

Does any one experience having slow performance after upgrading to lion? (I'm using an iMac early 2008 with 4gb memory)

I'm having a problem on my iMac early 2008 (2.4GHz Core 2 Duo 4gb SDRAM) after upgrading to Mac OS X Lion.
The animation such as mission control and full screen and especially, launch pad performs really slow.
Sometimes, mission control doesn't even show the animation.
This is terrible and I want Apple to fix these problems or otherwise this is just making my mac useless.
Does anyone experience having similar problem?

thanks for the reply!
I've checked the activity monitor but nothing was taking up the space expect for Flash Player (Safari Internet plug-in, which takes up 29% of CPU)
here's my screenshot. can you see any problems?
and here's another

After upgrading to 10.6 I cannot use AppleTalk to connect to my HP LaserJet 4ML printer.

After upgrading to 10.6 I can no longer use AppleTalk to connect to my HP LaserJet 4ML printer. So I am now using a JetDirect 300X box connected to the parallel port of the printer and an ethernet cable into my Linksys router. But I have had no luck with this setup. I was able to get a printout from the JetDirect box that gave me the IP address of 184.35.129.151 which I tried using in the printer setup dialog box. No luck. My ethernet network IP is 192.168.1.100, so I tried putting in 192.168.1.2, etc. and 192.168.1.151 (151 being the JetDirect IP address). Still no luck. When I do the printer setup it seems to be finding the printer but when I try to print it cannot connect. I have also tried putting the ethernet cable from the JetDirect box directly into the other rear port on my MacPro. No difference.
The HP website clearly says that this printer can be connected to a Mac using the JetDirect box. But the configuration page that I printed out from the printer doesn't say anything about IP addresses and there is nothing in the manual about IP connection. Do I need to find the IP address of this printer, and how do I find that?
I would really like to continue to use this printer. Any help would be much appreciated.

Sorry about that. Let's see what we can do. Take a look at this site:
http://www.mikestechblog.com/joomla/networking-section/network-printing-category /52-how-to-configure-an-hp-jetdirect-300x-print-server.html
It's to set up on a Windows PC but just get an IP address at step 8. Then access the JetDirect's admin area using the IP address. Make the address fixed so your router cant change it. Then using System Preferences>Print & Fax you need to add the printer using the IPP protocol. If the IPP protocol doesn't work then try the HP JetDirect.
It's been a while since I had my HP LJ4MP set up that way so my memory is a bit fuzzy on it. Once you get it - it works. The only other thought is to get a cable with a 25 pin on one end and USB on the other.

MacBook slow after upgrading to mavericks--still slow after reverting with time machine

After upgrading to Mavericks OS my 2012 MacBook became slower than ever before. My MacBook was freezing and the beach ball kept appearing. This seemed to be something a lot of people were experiencing with Mavericks, so after other suggested didn't work, I decided to just revert to Mountain Lion using Time Machine. But my mac is still slow--I now avoid using it because it's such a huge hassle. I have 8 gb of RAM, 5.5 gb of which is free. ~98 % of the CPU is idle. Have no idea how to get my computer back to how it used to be. Any suggestions?

Resetting SMC could solve the problem, if you didn't yet.
http://support.apple.com/kb/HT3964?viewlocale=en_US
Or clean install of Mavericks could solve the problem.
How to create an OSX Mavericks install drive.
http://www.tips-and-tricks-in-mavericks.com/how-to-create-an-os-x-mavericks-inst all-drive/#more-1635

Satellite L310-D4010: OS has become dead slow while using the CD/DVD drive

Dear all,
I has bought Toshiba Satellite L310-D4010 at chennai, India.
It has 2GB RAM and 1.83 GHz Intel Core2 Duo Processor.
But my system has become *dead slow* while i am using the optical drive i.e., when i am writing a disk and copying the content form the disk.
I was not able to open any application while i am using the DVD drive.
Please guide me to resolve this problem.
Thanking you.

For me it is also logic that notebook performance goes down when I copy a lot of data. To be honest when I use some burning application to save data on CD or DVD I leave it running till the end and avoid usage of other applications while burning procedure is active. All I do at the same time is surfing in Internet.
I cannot imagine you are not able to start some applications. Maybe notebook needs some more time to start application but it must work.
At the end I must say that 2 GB RAM for Vista notebook is for me really the minimum and if possible I recommend you to upgrade RAM if possible. This notebook model is not known to me and max RAM for this model is not known to me but I presume the 4 GB should not be the problem.

FileVault stalled/failed at 80% after upgrade to Yosemite and choosing to use Filevault

Since upgrade to Yosemite and choosing to use FileVault which has been 10 days now, FileVault keeps saying estimating time remaining. I have run diskutil cs list multiple times and sometimes it says 80% complete and other times it says failed. I've also run EtreCheck multiple times and sometimes it says converting and other times it says failed. System running slow or low on memory since upgrade also. I have a MacBook Pro 15" early 2011, 2 GHz Intel Cor i7, 4GB 1333 MHz DDR3 and here is my last EtreCheck report.
EtreCheck version: 2.0.6 (91)
Report generated October 26, 2014 at 9:10:36 PM PDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
AMD Radeon HD 6490M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:56:46
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (361.94 GB free)
Encrypted AES-XTS UnlockedConverting
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-898 disk2 : (510.3 MB)
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted> : 11 MB
disk2s2 (disk2s2) <not mounted> : 15 MB
disk2s3 (disk2s3) <not mounted> : 11 MB
disk2s4 (disk2s4) <not mounted> : 12 MB
disk2s5 (disk2s5) <not mounted> : 8 MB
disk2s6 (disk2s6) <not mounted> : 11 MB
disk2s7 (disk2s7) <not mounted> : 13 MB
disk2s8 (disk2s8) <not mounted> : 14 MB
disk2s9 (disk2s9) <not mounted> : 14 MB
disk2s10 (disk2s10) <not mounted> : 15 MB
disk2s11 (disk2s11) <not mounted> : 8 MB
disk2s12 (disk2s12) <not mounted> : 9 MB
disk2s13 (disk2s13) <not mounted> : 27 MB
disk2s14 (disk2s14) <not mounted> : 16 MB
disk2s15 (disk2s15) <not mounted> : 23 MB
disk2s16 (disk2s16) <not mounted> : 12 MB
disk2s17 (disk2s17) <not mounted> : 11 MB
disk2s18 (disk2s18) <not mounted> : 24 MB
disk2s19 (disk2s19) <not mounted> : 14 MB
disk2s20 (disk2s20) <not mounted> : 18 MB
disk2s21 (disk2s21) <not mounted> : 10 MB
disk2s22 (disk2s22) <not mounted> : 36 MB
disk2s23 (disk2s23) <not mounted> : 17 MB
disk2s24 (disk2s24) <not mounted> : 20 MB
disk2s25 (disk2s25) <not mounted> : 18 MB
disk2s26 (disk2s26) <not mounted> : 42 MB
disk2s27 (disk2s27) <not mounted> : 33 MB
disk2s28 (disk2s28) <not mounted> : 29 MB
disk2s29 (disk2s29) <not mounted> : 12 MB
disk2s30 (disk2s30) <not mounted> : 6 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) Support
[not loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
Launch Daemons: ℹ️
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.plexapp.helper.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
Microsoft AU Daemon UNKNOWN (missing value)
Canon IJ Network Scanner Selector2 Application (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Canon IJ Network Scan Utility Application (/Library/Printers/Canon/BJPrinter/Utilities/Canon IJ Network Scan Utility.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins: ℹ️
Move_Media_Player: Version: npmnqmp 071505000006 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Destinations:
GoFlex Home Backup [Network]
Total size: 3 TB
Total number of backups: 70
Oldest backup: 2013-07-21 16:39:58 +0000
Last backup: 2014-10-17 01:49:13 +0000
Size of backup disk: Excellent
Backup size 3 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      9% WindowServer
      8% com.apple.preference.security.remoteservice
      5% Safari
      3% ReportCrash
      3% corestoraged
Top Processes by Memory: ℹ️
262 MB AntiVirus
112 MB softwareupdated
103 MB mds_stores
94 MB systemmigrationd
82 MB Mail
Virtual Memory Information: ℹ️
131 MB Free RAM
1.54 GB Active RAM
1.38 GB Inactive RAM
1.14 GB Wired RAM
2.82 GB Page-ins
17 MB Page-outs

The update could not have degraded your clips in any way. There is simply no mechanism for that to happen at all. When viewing the updated timelines, click on the Viewer to select is, Shift-Z will "fit to window". Be sure you're not viewing them larger than you did before. Also, delete all render files.
The only other thing I can think of, is that your hardware is older and Yosemite is taxing it. FCPX will degrade image quality so it can get smoother playback on occasions. But when you stop playback and are parked on a single frame, you'll see the full resolution. This could be happening also. What are your Mac's specs?
BTW, video noise is very, very difficult to get rid of. You can improve it, but short of something like the very expensive (and very long rendering) Neat Video plugin, video noise is something you mostly live with, if it is too drastic in the image.

Help : After upgrade to IOS5, I only can use my iphone 3gs in Spore instead of Msia. Any1 know what is the problem & how to solve it?!

I bought iphone 3gs in singapore last year,I had no problem to use it in Singapore & Malaysia but after i upgrade to ios5,i can't use it in malaysia.It will automatic restart my phone itself. Is it because of IOS5 problem?!Because when I register my itune a/c, I selected the country is Singapore. Anyone know what is the problem & how can I solve it?!

If it automatically restarts the phone firmware is corrupt. Restore the phone with iTunes and set up as a new phone, do not restore your backup, which is likely where the corruption is. If it then works you can try restoring just the backup. If that breaks it again you know where the problem is; you will have to start over and manually reinstall your content.
To restore just the backup, right click on the phone's name in iTunes and select "restore from backup"

After upgrading Wifi is extremelly slow while using batter

Similar Messages

Maybe you are looking for