After US cellular 8330 .127 update media not found as usual

After .127 on 8330 US cellular update everything seems ok except i noticed that the media card folders are only accesible from media player doc. to go under media card info but not listed when adding ringtone to individual phone numbers it used to list media card folder and on board ringtones now it only lists rigtones in system memory only ..
note i can add pictures from media card they are listed under camera?
I have heard that rim usaually takes two steps forward and one or two steps backward ??
any idea
i can move the media from media card to system it will load them fine??
Solved!
Go to Solution.

Hi,
You can get to the music folder when assigning ringtones.
When you edit or setup a contact you assign a ringtone.
Scroll all the way to the top in ringtones, and browse. You can
get to the music directory to assign a song as a ringtone.
I use "Truckin" by the Grateful Dead as my phone ringtone!
Here are the correct directories that should be on the media card,
and device memory. This is where Blackberry looks for the files:
Thanks,
Bifocals
Blackberry
Pictures
Music
Ringtones
Videos
Voicenotes
Message Edited by Bifocals on 02-09-2009 06:50 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates- many (not all, but plenty) of those songs were "cut off" after playing about 2/3 through them- I haven't gon

I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates… many (not all, but plenty) of those songs were “cut off” after playing about 2/3 through them… I haven’t gone through the entire library to see which are complete and which were cut off, but hoped this is “known problem” and hopefully with a known “fix”… Make sense?
Please advise…
Thx,
Johnny

I have a library of nearly 2000 songs and all of which were purchased/downloaded in their entirety. It seems that after one of the iTunes updates… many (not all, but plenty) of those songs were “cut off” after playing about 2/3 through them… I haven’t gone through the entire library to see which are complete and which were cut off, but hoped this is “known problem” and hopefully with a known “fix”… Make sense?
Please advise…
Thx,
Johnny

How to resolve: "Update server not found (check your internet connection)"?

When doing Help / Check for Updates, I get "Update server not found (check your internet connection)". This has been the case for 6-8 weeks or longer but auto update worked fine before. Not sure if something changed on my MacBook Pro. If so, I can't pinpoint it.
MacBook Pro (Intel Core 2 Duo)
Mac OS 10.6.6
Firefox 3.6.13
Firefox set to "No Proxy"

See iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

Hi,
I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
wsyncmgr:
Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
1/9/2015 12:00:00 PM 3668 (0x0E54)
WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Remote configuration failed on WSUS Server.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
Regards,
Malwinder

WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
It's not only a matter of installing the console, but also those hotfixes on a remote server ...
Torsten Meringer | http://www.mssccmfaq.de

Office 2011 14.1.4 Update can't be installed on this disk. A version of the software required to install this update was not found on this volume.

Microsoft update invited me to update to 14.1.4 today but the process fails with the following error:
"Office 2011 14.1.4 Update can't be installed on this disk. A version of the software required to install this update was not found on this volume."
System info:-
OS X
Build# 12E55
SN# C02jjoNFDRV7
Version 10.8.4
Processor 1.7 GHz Intel Core i5
Memory 4GB 1600 MHz DDR3
Startup Disk:- Macintosh HD - 24.15 GB Availble - 120.47 GB Total.
Partition Map Scheme: GUID Partition Table
What I do ?
1-I Click Verify Volume its get error msg " Disk Utility stopped verifying MAcintosh HD"
2- Volume bitmap needs minor repair for orphaned blocks????!!!
3-Invalid volume free blocks count !!!
4-The Volume MAC HD was found corrupt and need to be repaird!! How to repair???
5-Error: This Disk need to be repaired us...es window appears, Choose Disk Utility.
Please I need Full Support for above problem
Kind Regards,
Anas Al Areefi

misalaram wrote:
Csound1@ thanks for reply
i want to install microsoft office in my macbook pro
how can i do tat...plz tell me
Buy a copy of Office for Mac, install it, update it.

Regarding Template updates, what does this error " not updated, item not found" mean?

This is the second time I've posted this question so hopefully somebody will respond. At some point in the last few weeks I found that I could no longer apply a template in a group operation (returns the error shown above). If I modify the template and save it it shows all the related files to be updated but does not actually update them and again returns the error "not updated, item not found". As a test I created a duplicate of a particular .html file and applied the associated template successfully. When I apply a template change it does properly update the newly created file but not the others. I also did a mechanical file compare (using windiff.exe) between the original and duplicate file and there are NO differences in the two .html files. I have also deleted and recreated my site maps several times.
As an aside, Library items do update successfully.
I am running Dreamweaver CS6 on Windows 7.

I have an extensive home network and I consider myself to be very proficient with personal computers (had one since 1981) so let's start at that level.
I have you beat by 2 years. Bought an Apple II+ in 1979!
When this problem first started, I went to another PC (home built desktop Win 7 64 bit) I have and created a new Dreamweaver site copy using an instance of the site that was on a network share running on a NAS box (Netgear RAID5) that I use for central file storage. Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with. Now I have no idea why sites housed on my PC are having a problem but that seems to be the issue.
Your setup is very similar to mine - NAS (I'm using an Intel NAS) housing all my working files.
Just for a test I did the same thing on my main working PC (see below) and created a new site with the data that was on the network share. Well, lo and behold the template problem went away with both of the two sites I am having trouble with.
So it's working in the duplicate site, but not the current site. And in the current site, you have some files that update as desired and some that do not? Why not just make the duplicate site be the main working site?
Anyhow, I cannot think of any wrinkle that would cause DW to update some legitimate child files in a site but not others, except for a corrupted file cache.

CS4 internal error 11 Media not found, for menus?

Hi,
I have been attempting to burn blu ray with menus from the Encore Library. I keep getting an error when the motion menus are being rendered at the beginning of the disk build process. The error makes reference to the menu at hand and an "Internal Error 11" Media not found. I tried changing menus and I even tried leaving out the chapter selection menus so that there were no "animated buttons". I am not sure what to do, maybe Ill try reinstalling the encore library. I know that I have to go to bed for now and I will not have time to work with it until around 5pm.. Does anybody know what is going on here?
Windows 7 Pro
Intel i7 920 2.66Ghz
6Gb Triple Channel DDR3 1600mhz
ASUS P6T Motherboard
BFG inVidia geForce 260GTX OC
MOTU 896mk3 audio interface on a dedicated PCI-E 1394 card with TI Chipset
Delta 1010 PCI audio interface
LG 8X BluRay Internal Burner

Shouldn't be a library problem.
Did you apply many "corrections" to the project?
If yes, try to clear all the files kept in "AuthorScriptHDMVSessions" folder (your Encore project folder\"name of the project"\AuthorScriptHDMVSessions).
You can clear all the .xmp files in your Encore project folder.
When you'll re-run Encore, it will take more time to re-built missed files, but everything will be cleaner.
Hope this helps
Ciao
Giorgio

After hard reset my time capsule is not found in airport even though its light is green so cannot reset

After hard reset the time capsule is not found in airport even though i have reconnected in proper order - says backup disc not found

Something is wrong because a hard reset will never leave the TC with green LED.
What version TC.. what firmware??
What OS on the computer?

AFTER 10.5.4 UPDATE "MEDIA NOT RECOGNIZED" WHEN BLANK DVD ON DRIVE

Hi, after update 10.5.4 my CDs and DVDs will be read and play in the Optical Drive, But when I insert a blank one, any kind, the finder will open and when I select to mount it "media not recognized" comes up. I have the same DVDs that Ive been burning to till this update with no problem at all.
I already did permissions repair.
Please help.
Many Thanks!

I have a problem pretty much like that too, I updated my mac, and now my superdrive won't read my discs, but unlike yours, it spits the disc out.
I did find out that it can recognize DVD +R, sometimes, but it can nolonger recognize DVD -R.
Also my superdrive makes a sound like this: http://www.imeem.com/people/2tOboJ/music/gQwemcsY/superdrive_problemwav/
Sorry if I'm hitching on your post Alex, I also have another problem, and that is I can see the "reply to this post" icon but I cant see any icons that say "post new topic" anywhere, I wonder why. =(
Andrew
=)

I have an ipad with 8.1.1 software. I lost my thumbnails on my movies after one of the system updates but not sure which one since I don 't look at the movies that often.

I have an ipad running 8.1.1. I lost all of my movie thumbnails after one of the system updates, but I'm not sure which one since I don't look at the movies that ofter.How do I restore my thumbnails. They are fine in itunes on my imac that I sync with.

onix_76 wrote:
how come? Documents also have on hand to buy as photo and check the box
So what? The second-hand shop you bought it from didn't follow the right procedures. You also didn't follow the right procedures to make sure that iPhone was not in Activation Lock. It's like buying a car for cash but not getting the title signed over to you. It's not your car if you don' have the title. And that's not legally your iPhone if the previous owner's Apple ID is still registered to the device for Find My iPhone/Activation Lock.
Only a proof of purchase from the ORIGINAL retail store would do any good at all. Return the device to where you bought it and demand your money back. If they refuse, either get a lawyer and/or turn in the device to local police. If you're in possession of stolen property, then the cops won't care about where you got it from.

Software update asks for restart before installing the updates. When restarted password is asked. After the restart the software updates have not been installed. how come?

Software update ask for a restart before installing the updates. After the restart password is asked. When given the computer is restarted but the software updates have not been installed. How come?

This article
http://reviews.cnet.com/8301-13727_7-57400956-263/apple-issues-software-installe r-update/
explains what might be going on.
I noted that one of the updates in the list for my wife's iMac was an update to Software Update itself. Probably to fix this very problem. But it wasn't being applied due to Software Update itself not working.
I considered two solutions.
(1) Uncheck all the updates except that one update to Software Update. Then after fixing Software Update, apply all the other updates remaining. I did NOT try this approach.
(2) Download and install the "combo update" for 10.6 -- from here
http://support.apple.com/kb/dl1399
I decided to try solution #2. It's a large download, 1 GB, but the whole process took less than 15 minutes. The "combo" update checks and reapplies every update since the beginning of 10.6, so if something is missing or amiss, it gets filled in. It's done manually, by downloading the update, opening the .dmg file, and running the update. When I did this, it fixed the Software Update issue because I then reran Software Update and additional, new updates were found and they all installed fine. Software Update was working as it should. I then ran it a third time and some additional ones were found, also then successfully applied. Finally, no new updates were found by Software Update, which mean everything is up to date.
I can't be sure if your issue is the same as mine (the bug in the CNET article above) but I'm guessing that the combo update will resolve your issue.

I've had i tunes for a year or two and even after a reinstall,I can't access my itunes because of an error7 or windows error 127.Entry point not found.What do I do???please help

I've had itunes now for a while.Now when i try and access itunes i get an error of entry point not found.and an error 7 windows error127.Says to reinstall itunes.I do and get the same result.What do I need to do....please help....

Often that's caused by damage to one of the other software components.
I'd try the following document first:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If you're running XP, there's a link to the equivalent instructions for that OS in the document.)

After start-up "The network path was not found."

Hi Folks,
I have a Synology DS214se. I am running Windows 8.1, every time I start up I get the error:
An error occurred while reconnecting Y: to \\SERVER\home
Microsoft Windows Network: The network path was not found.
This connection has not been restored.
When I go into File Explorer 20-30 seconds after reaching the desktop, I have no problem accessing the NAS, including via the Y: drive.
My PC uses the NAS for it's Windows home directories, e.g. Documents, Downloads, Desktop, etc. I wonder if it has something to do with the speed/order at
which it connects on start up. The result is I never can see my desktop unless I click on it and push F5. I have similar issues when my PC awakes from sleep.
Is their some way to force windows to connect or set up my Y: drive before doing other things?
Thank you,
Delzrock

Hi Delzrock,
Would you please let us know current situation of this issue? Just check if above suggestion can help you to solve this issue. If any update, please feel free to let us know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Couldn't start after effect cs4 ( AfterFX.exe - entry point not found ) ( aif_ogl.dll )

Please Help me!
I Couldn't start after effect cs4. I also uninstalled and reinstalled it many times but it's giving me this error :
AfterFX.exe - Entry Point Not Found
The procedure entry point wglSwapMultipleBuffers could not be located in the dynamic library ........................ \Aif_ogl.dll.

It means your graphics hardware is not compatible. Update the graphics driver and configure it suitably.
Mylenium

Flash CS5 wont open after working for years? Entry point Not Found

Hi Guys,
I am having a problem opening my Flash CS5 after it working fine since I installed it forever ago. I do not know what could have caused this, and my other cs5 programs are opening fine.
Dreamweaver and Fireworks didnt change all (these 3; along with Flash; are what I use most)
I also open photoshop and aftereffects from my master collection for testing and they opened fine also. I ran a scan using microsoft essentials and found nothing.
I tried run as administrator on flash and it said the same thing.
I am using windows 7 Ultimate N SP1 64 bit
Here is the alert in text.
flash.exe -Entry Point Not Found
The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
AVUI_ButtonChangedMessage@23@@Z could not be located in the
dynamic link library dvaui.dll
Please let me know what is going on here.
Thanks, I really appreciate the help.
Randy

You should be able to cherry pick Flash out to uninstall and reinstall it from the master suite installer if I remember correctly. There's nothing wrong with a fresh reinstall, especially after years. That's a long time to be bulletproof.
Otherwise I can't hand you a commercial DLL but I really don't think your problems will be fixed even if I did. I think it's just hardware doing what it's notorious for, eventually having a fault somewhere. A reinstall of Flash should be fast and will write to new sectors and fix the file.

After US cellular 8330 .127 update media not found as usual

Similar Messages

Maybe you are looking for