After using Apple Compressor It wont free up my ram

I noticed that after I use Compressor my Ram wont free up. I have 8 Gig of Ram and after using Compressor it just stays between 486 mb or 300 mb. I can only get my ram back after a reboot. What's up with that?

So i gave it a try and got this in the Terminal window after using Compressor and closing it.
failed to initialize CHUD.framework
I have no clue why or what the CHUD.framework has to do with purging the RAM.

Similar Messages

Creative Cloud Issue After Using Apple's Migration Assistant

I bought a new Mac and used Apple's Migration assistant to transfer everything from the old Mac to the new. Everything works with all apps except Creative Cloud. Creative Cloud states that some files are missing and prompts me to download and install Creative Cloud again. I do that and run the App. The app runs for a minute, acts like it's installing than I get the same error -- Creative Cloud is missing some files or some files are corrupt, please download and reinstall -- it brings me to the webpage to download it again. I'm stuck in this infinite loop!
The old Mac where Creative Cloud runs fine is a 15" Retina Display MacBook Pro. The new Mac is a 27" iMac.
Any help is greatly appreciated!

Uninstall, run the cleaner, and install fresh
-Sign out fix http://forums.adobe.com/thread/1408331?tstart=0
-On a new drive http://forums.adobe.com/thread/1398961?tstart=0
-and http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

After using apple hi-fi spkrs, ProductRed 8g nano doesn't show up in itunes

My product red 8 gig nano has been working well for nearly 2 mos. Then on Saturday I bought the apple hi-fi speakers.
Sounded great but when I went to add music today in Itunes 7, my nano no longer shows up in the navigation pane.
I can still play music and my nano seems to be charging fine in the universal dock, but aggravating to be unable to add music, sync contacts, etc.
Any suggestions would be greatly appreciated.
Dell Dimension Windows XP
Dell Windows XP

Hey there-thanks for the feedback My nano isn't showing up in itunes or my computer. Also checked the device manager and it isn't showing up there either.
My thought is that since it stopped working right after using the hi fi speakers once, the dock in the hi fi speakers may have damaged the nano's hardware.
Note, nano still plays both on its own and in the new speakers, just can't add tunes-argh!
Check these out:
iPod in My Computer but not iTunes
iPod Not in My Computer or iTunes
Check the Device Manager
Windows Laptop Doesn't Recognize iPod Over
USB
I hope this helps!

Video out after using Apple Video adapter.

Hi, I have an Mac G5 17" iSight and after I mirror'd my screen to my TV using an Apple video adapter (something I've done hundreds of times before) the computer screen wouldn't change back to the general screen resolution (also something it used to do before). After restarting my computer in an atempt to fix the problem the video was all black (nothing at all, i.e no faint glow) but the computer started up correctly and I could interact with it and control it thru remote access from another mac.
Restarting the PRAM did'nt change anything.
But then after reseting the SMU the computer got worse! Now it just powers up and after som or se time the fans start working real hard but nothing else happens. I don't want to keep them running for more than half a minute because I'm afraid the logic board will burn up if it hasn't already.
What could have happend? Is it fixable?
Please help....

I answered my own question (this is my post after finding the answer in another thread). Hope this helps someone.
Woohoo! Thanks for the post- I have a 5G with the Apple A/V cable, but I couldn't get the video to work, just the audio on the tv. I didn't have "TV Output" selected "On." Now I don't have to return the product. Man, this 5G is amazing.

After using update, my g3 wont boot=(

I was using my g3 and everything was fine. I decided to try the update software feature. Half way through the download it said error, and gave me the option to restart. After restarting all i get is a black screen that says this
Apple imac open firmare 3.0.f2 built on 04/23/99 at 14:31:03 Copyright 1994-1999 Apple Computer Inc.
ok
0>_
Please help with this issue, thanks.

First of you need to be posting
in the iMac G3 forums. This is the new iMac Intel
Core Duo forums and some folks here have never seen a
G3 or OS9!
You don't say what your were updating, Mac apps, the
OS, what?
If you are trying to update to OSX you need the
firmware update found below installed first.
iMac Firmware Update 4.1.9: Information and
Download
I think the G3 folks can assist you better. The forum
is here;
iMac (CRT)
Im very sorry about posting in the wrong area...... Thank you for the direction=)

Clock freezes after using Apple DVD Player

I am having a small and annoying issue with the Apple DVD Player (v 4.6.5). This just started happening recently. Everytime I run a DVD (or video TS file, etc) on the software player-it performs as usual. After quitting the application and choosing to eject the disc, I notice there is a longer lag from when I first used the computer, then the little colored wheel of death spins, and eventually Apple DVD Player closes.
The problem, however, is after the application is closed out, my time freezes in the status bar in the upper right hand corner of the screen. (As I write this it says 1:16 and the time in the apple "date and time" preferences panel of OSX says it's 2:14-which is the real time) If I drag the cursor up to the time status bar in the upper right hand corner, it turns into the spinning color wheel, and back again once dragged out.
Once the computer restarts, the time in the upper right goes back to normal with no spinning wheel (until I open Apple DVD Player and quit out of it again). I know this is not an earth-shattering issue, but it is fairly annoying and abnormal. If anyone has suggestions, please help.

It sounds like you found your answer but I also wanted to mention that this is a known BUG when using DVD Player and the Digital Optical Out of a G5. If you look at activity monitor when the Clock is dead and you get the Beach Ball the SystemUIServer will be listed as not responding. If you Force quit this process everything should start working again. As long as the LoginWindow Process is running the SystemUIServer will restart when needed after the force quit.
HOWEVER, The other part of this bug with Digital Optical Out is that sometimes the LoginWindow Process will also stop responding. In this case a Log-Out is the only way to correct the problem. The third part of this bug is sometimes the Finder also stops responding but a Relaunch will fix that.
As I said it sounds like you found your problem but I wanted to post this incase others out there using the Digital Optical Out read this and don't correct their problem.
Also, If you were using the "DOO" by deleting the .plist will set the DVD player back to SYSTEM falsely making one think the problem is fixed.
Last I know this is a known bug because I submitted it as a bug to Apple and received an e-mail stating they know of this problem already.

Interlaced frames after using Apple directions for Canon HV30 24p

I have an Canon HV30 HDV video camera and clips that have been recorded using its 24p mode. I'm using the instruction Apple has given to remedy this type of footage in Compressor and output to Pro Res:
http://support.apple.com/kb/HT2410?viewlocale=en_US
I've tried this method a couple of times and carefully also. Everything seems to work well other than the fact that I am getting interlaced frames on the last one or two frames of each clip. Sometimes it's the beginning of the clips. As they are supposed to, clips are changing to 24p and when I step through a clip frame by frame everything looks fine, except for those last couple frames. Other methods, like using JES Deinterlacer, do not produce these distorted interlaced frames. However I would prefer to use Compressor. Could it be that I changed some setting or preference in Compressor a while back that is affecting these clips right now?
Please help!
Once again, using Final Cut Studio 2 and a Canon HV30 with 24p clips.

Hello,
I experienced the same thing. But I feel that the first second or two of any clip is not useable, when
editing I have never needed every last frame.
This is not much of a help to you. I think it has to do with the mysteries of HDV, Long GOP, and 2 t0 3 pulldown and the complex post processing that must happen to yield 24 full frames.
Good luck, Tom

No Wi-Fi after using Apple TV to watch video from iTunes?

After watching video from iTunes library on ATV2 , when trying to use mac afterwards wi-fi slow or stopped. I Have to unplug router to get it working again. Don't think its always being like this?

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

Used Apple Configurator to install free MDM app on unsupervised device - How will it update?

In hopes of cutting down deployment time, I am testing Apple Configurator to pre-install our MDM app (Worx Home by Citrix) on the iPhone/iPad. The devices will be unsupervised. I've searched through the documentation and can't find an answer to this question/scenario:
So I installed this App using my MacBook/Apple Configurator using my own Apple ID. What happens when the Worx Home app is updated and the end-user goes to update it? Will they be prompted for my Apple ID password?
If so, that seems a little bit... uh... short-sighted by Apple and very enterprise-unfriendly. There needs to be a way to pre-install a free app, such as an MDM product app, and have the end-user tie that app to their own Apple ID either when they open the App for the first time or update it the first time.

Wait unti the app is done downloading in your iTunes. Then go back to your VPP account and down load the spreadsheet again and upload into configurator. The process is a pain, but the only way it works for you to get all of your codes into configurator.

HT1918 hi , i don't have bank account . im trying to use apple id to download free apps but it is asking me to provide billing information but i don't have it . so how can be able to preceed without my account provided here

Hi, im trying to use an apple id at iTunes store. I only wanna get free apps but it is asking me about the billing information but I don't have bank account . how can I provide a bank account there. how would I be able to use those free apps on my iphone without providing the billing information.

Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card

IPhone 6+ won't go to sleep after using Apple Watch App

I noticed that since I own the Apple Watch my iPhone 6+ battery drains very quick. Currently "Home & Lock Screen" and "TuneIn Radio" are using the most battery (although I force-killed all apps). Another thing I noticed is that my iPhone won't go to sleep after the configured 2 minutes. It just stays on sucking on the battery.
After I restart the iPhone everything is back to normal. I believe the problems start the moment I launch the Apple Watch App on the iPhone.
Will do some tests...

I'm having the same issue even after the 8.1.3 update. It's not from my carrier because I used a different carrier and noticed the same issue.
My short term fix has been putting my phone on airplane mode then off.
If any one knows a solution, please let me know.
Thank you.

Admin passwd issue after using apple s option

I have an old PPC G5 duel 2.0 I still have some information and programming files on this unit which from time to time I still need to access, it has been about a year since I last logged into this unit and found that the last password I remembered is wrong or I cant remember it.
So I tried the following options from Apple S
Type mount -uw / and press Enter.
Type rm /var/db/.AppleSetupDone and press Enter.
Type shutdown -h now and press Enter.
When the unit shut down and I restarted, the welcome video began to play and the installer began to run.
I am stuck here because I cant seem to get the unit to see a previous installation, couple of quick notes.
I had the install disk in the DVD, (earlier the DVD did not recognize the disk) So I am not sure if the disk booted and thus leaves me in the installer .
Is there a way to recover from this condition?
I do have a backup, I tried to use that back up but got a strange warning, about how the machine would need to be upgraded first, odd because the backup was from the current version. 10.5.x

I went as far as selecting the language, I did not select continue, I did attempt to load a backup file, but received an error backup was not compatible with the version, upgrade required first.
I did not see any menu items for resetting the password.
Its also possible the DVD disk may not be properly reading the DVD disk, (it will not play audio CDs but does recognize data DVDs,)
If the DVD drive is bad, Im stuck here, until I get a new one, but will try the steps you outlined,
(I removed the DVD from the drive, rebooted, right back to the installer) (without the DVD in the drive)
So, that confused me, will try to see if I can get the drive to boot to the Disk, (thanks for your reply, I appreciate it)

USB devices disappear after using Apple TV

When I Option-Click on the Sound icon in my menubar, all of the USB microphone/headset devices show up. It's how I switch from headset to headset.
However, if I use my Mac to play itunes through my Apple TV, all of those USB devices disappear from the menubar's Sound Icon. And none of them work: sound comes only through my computer speakers.
Restarting the Mac doesn't fix it. The only fix I've found so far is to completely unplug the Apple TV (to end the wifi signal), and then restart the Mac. This makes all of the USB devices appear again, and are all chooseable.
Anyone else see this behavior?
I'm running a "mid 2010" Mac Pro tower, GHz Quad-Core Intel Xeon, and 10.9.1

I get this all the time w two ATV on the same wifi network.
First called "Apple TV", the second called "Living Room".
I see on ipad and iphone "Apple TV (2)" as one individual item. It looks like if finds "Apple TV" then finds the second one, but aggregates it into "Apple TV (2)".
Randomly, it will sometimes show two seperate ATV links in the airplay options, then revert back to "Apple TV (2)" as one option in airplay.
Is definitley a bug in airplay software.

After using migration assistant, Acrobat wont launch on MacOs 10.6.7

Used migration assistant on a new Mini-Mac to bring all the programs/files/settings over. It seems everything came over pretty smooth. The Mini Mac is running OS 10.6.7. I have 3 versions of Acrobat Pro installed and none of them will launch now. When I try to launch Acrobat a dialog comes up saying that "Acrobat quit unexpectedly". Any ideas/suggestions?

As you've discovered some applications don't launch correctly using Migration Assistant. In particular Adobe applications like Acrobat or the Creative Suite should generally be newly installed from their install disks.
It's probably because Adobe applications spread their resources between many different files in many different places. They also are serialized (so they won't be stolen) requiring secret serialization files to be installed. Some of that probably isn't being copied in a way that will make it work after migration assistant.

After using Apple TV with my iPad the Apple TV location disappears from available Airplay Choices

I have two Apple TVs one in the bedroom and one in the living room. The living room location seems to come and go from the iPad2s Airplay menu. Restarting the Apple TV has no effect. I am able to use the living room with Airplay but then it disappears from the choices available for Airplay on my iPad.
Help,
Dave

I get this all the time w two ATV on the same wifi network.
First called "Apple TV", the second called "Living Room".
I see on ipad and iphone "Apple TV (2)" as one individual item. It looks like if finds "Apple TV" then finds the second one, but aggregates it into "Apple TV (2)".
Randomly, it will sometimes show two seperate ATV links in the airplay options, then revert back to "Apple TV (2)" as one option in airplay.
Is definitley a bug in airplay software.

After using Apple Compressor It wont free up my ram

Similar Messages

Maybe you are looking for