After using for a week only appearing apple logo on my iphone 6....
iPhone 6, 16gb I'm not familiar with the O.S sorry, but the unit is functional for a week, now second day only apple logo appearing...I tried to press home @ on/off switch at the same time, still the logo appearing...waiting for the help out there
Hey Ice14344,
Thanks for the question. Oh man! I’m sorry to hear that. Luckily, we have a set of steps that usually resolves issues with devices getting stuck during startup:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
http://support.apple.com/en-us/HT201412
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
Thanks,
Matt M.
Similar Messages
-
My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?
Need Help Ye,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow? -
What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Freeze up after using for awhile...
I am having issues with my iBook freezing up after using for awhile. It will start up just fine, programs run just fine, but when i've been on the internet for a while (or typing in Word or anything requiring a significant amount of memory)my iBook freezes up and there is a periodic clicking noise coming from the lower left hand side (by the vent). I've tried resetting the memory and that didn't seem to help anything. Once the computer is frozen it is down for a while. It will only start up after it has been disconnected from any power source overnight. Then everything runs fine for a while and then the clicking begins again. Does this sound like an overheating issue, harddrive issue or software? Any help would be greatly appreciated!
iBook G3 (white) Mac OS X (10.3.9)Thanks for all the help! Here's an update.
My iBook now refuses to safe boot but instead will boot up normally! I haven't had any issues with it freezing up but I have only been using iTunes to transfer music to my ipod.
The S.M.A.R.T. status of my drive is "verified".
When attempting to boot into "safe mode", the loud clicking happens immediately but stops after about a minute or two and then the grey apple and progress indicator appear. It will stay like this for a couple of minutes and then it automatically restarts and will boot up into the normal mode.
When attempting to repair my drive via the system disk, I get the error message that the underlying task reported failure on exit. Written in red in the message window is "Keys out of order".
Also, the archive and install feature is not working. It tells me that there was an installation error and to retry installation.
I will look into expanding the memory and additional disk repair software.
I connect to the internet via ethernet(cable modem) and/or airport.
Thanks again for all the help! -
i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!
That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.
-
My ipod touch is stuck up at Apple Logo, I have tried to update and restore through ITunes but no use, It stuck up again at Apple Logo with no Error, after restoring ITunes showes your ipod is restore but still apple logo won't go, Due to new Laptop, I do not have any backup, therefore i have tried to select new Ipod touch and goes through step by step procedure but no use, Please help what to do?
i tried reseting my ipod today and had a similar problem... it wont be recognized by itunes, the only thing i havent tried is putting it into DFU mode, or the state that it is in when u recieve it telling u to connect it to itunes.i recommend putting it into DFU mode. http://www.youtube.com/watch?v=34v8HMC9B98 this should better explain it. if i find another way, ill keep u updated
-
I am trying to upgrade my macbook pro to os x mavericks， but it has been on the reboot process for more than 2 hours. There is only the apple logo with the spinning ball thing. What should I do?
Hi there Candyleehoiman,
I would recommend taking a look at the troubleshooting steps found in the article below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W. -
I have restored my iphone 3gs after having only the apple logo, it took me through all the restore, a page saying 'congrats your phone is now unlocked', and allowed me to chose to set up from new or back up....yet still displays only the apple logo.
Restore as New...
Redownload your Purchased and Free Apps using the Apple ID you Originally used...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
I clicked on "Erase all Content and Settings and now my ipad is not working, only the apple logo appears. how to i reset it back?
Some please show me how to reset it.Here is some information from Apple:
http://support.apple.com/kb/TS3274
http://support.apple.com/kb/HT4057 -
My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
my iphone is detected in itunes as normal, but screen on the phone only shows apple logo??? restored and everything but no difference its weird, it restores successfully and stuff but once done the screen only shows apple logo.. note:while restoring everything goes through as normal on the phone it shows the bar loading etc.. but once complete just stays on apple logo.
It can take a few minutes to reinitialize, but if it stays on the Apple logo for as much as 10 minutes there is something seriously wrong. Try restoring again, and set up as a new phone rather than installing your backup. If this fixes it you have a corrupt backup. If this doesn't fix it the phone is broken. Or possibly jailbroken.
-
Photoshop CS6 shut down after using for 5mins; no image can be display on canvas.
Photoshop CS6 shut down after using for 5mins; no image can display on canvas.
Thanks for your help. Actually the problem was solved when turning off the GPU. In the mean time, I would like to upgrade my Video Card, too. My existing vedio card detials are as below. May I seek your advice on any good method other than replace it.
-
in my ipad email address which I am using for sending mail is appearing differently in the receipents mail box ! how to resolve that
while sending a email in my ipad it is showing the correct email address([email protected]) in the ""from"" field but in receipients inbox ""from"" field it is showing another email id ([email protected])
-
I cannot open ipad 2 after i update to ios 7..only the apple logo keeps on displaying..please help..
I cannot open my ipad 2 after update to ios 7..only the apple logo keeps on displaying..please help..
Power-cycling or connecting to iTunes didn't fix the issue. However the iPad did restart, trying to install the update but it didn't complete and received a error once again. And now the iPad is stuck on the update screen with the progression bar beneath the apple.
The error reads, "The iPad could not be updated. An unknown error occurred (6)." -
Does The Ink Of DeskJet Printer Gets Dried If Not Used For A Week?
Hello Guys, I have recently bought a HP DeskJet 1510 All In One Printer. But the Shopkeeper said me that the Ink of the DeskJet printer gets Dried up if not used once for a week or two. Is that true? If yes is there a way to get back my ink?
I have seen some Diagnostic Option in HP Printer Assistant is that the option?
Please help me. Thank You...........Hi HP990
I'd have to agree with Charles. Powering down at the On/Off switch is always recommended as it will ensure the cartridges get capped properly.
The DJ 1510 uses IPH (integrated printheads). They won't 'dry out' if not used for a week. If you happen to run into any print quality issues you can always run a Cartridge Clean using the automated tool, see the link below for details...
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03800862
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP
Maybe you are looking for
-
Field Catolgue in alv grid display
Hi Abapers, I need to display the percentage rows with decimals and other rows without decimal . Is their any option in field catalog to do like this. Or tell me any other alternative to achieve this. sno total col1 col2 col3 1 22
-
How to fix CS6 from crashing when trying to save as/export as an .idml file?
Tried the old faithful of restarting etc and using a single page with not styles etc or anything really, the most basic file but everytime CS6 keeps crashing. Any pointers on how to try and work around this? Running CS6 on 10.9.4
-
Calculate Depreciation Forecast for Fixed asset
Dear all expert, I'm new to ASO, would like to know if there's a way to do depreciation forcast for fixed asset in Essbase. 1. Database type is ASO 2. Assuming user will prepare forecast caplitialization of fixed asset then upload to Essbase 3. Attri
-
Airplay from 4s no video and cuts off internet connection
Airplay mirroring from 4s used to work now whenever I try it only streams audio and no video and cuts off my internet connection. Apple tv is connected with CAT6 ethernet to a dual band router. I optomized my router according to apple standards and s
-
Copy table contents between separated systems
Hi! We have 3 different ECC6 SAP systems, on physically separated computers: DEV, TST and PRD. I would like to update some of the ZTABLE's content from the productive PRD system to the test TST system. Is there a standard solution for this? Thank you