After using Ipad in Cancun, Ipad is disabled after returningto US. Wht do I do?
After using Ipad at resort in Cancun Ipad is disabled, What do I do?
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.
Similar Messages
-
How can I sign out of hotmail after using it on my ipad mini?
How do I sign out of my Hotmail account after using it on my ipad mini?
I believe that I have the same issue with iPad Mini with Retina Display, iOS 8.1. No matter which way I delete videos from my iPad, they will still show as "deleted", yet the space is not cleared up. I tried restore and then a full restore (clean setup as a new iPad) and it still does this to me. I can solve it by doing a restore each and every time I download a video and delete it. Rather frustrating. Has been a problem since day 1 of iOS 8. I'm yet to try the power+home button reset. It may very well work, but I am surprised that a "fresh setup" of an iPad didn't resolve it from ever occurring.
-
TS3274 After using restore steps, my IPad shows the Apple logo but will stii won't come back on?
After going through steps to restart my IPad, the Apple logo
Appears on the screen but it will not go back to
the main menu. It just stays on with the Apple logo
showing. The logo will appear and disappear at times but that
Is all it will do. HelpHi Connie2013,
Thanks for visiting Apple Support Communities.
The steps in this article can be helpful in your situation:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy -
After using GUI_UPLOAD, '#' appears in my itab
Hello experts,
Why is that after using gui_upload, the symbol '#' appears before and after each of record?
Again, thank you guys and take care!Hai
check the following Code
data : begin of it_mara occurs 0,
matnr like mara-matnr,
mbrsh like mara-mbrsh,
mtart like mara-mtart,
meins like mara-meins,
end of it_mara.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'c:\upload.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it_mara
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
Thanks & Regards
Sreenivasulu P -
my ipad has disabled itself after asking for a passcode after updating ios7 now tried to restore it but didnt work
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
My ipad is disabled after entering wrong password
Please help me. My ipad is disabled after entering wrong password. i actually forgot my password and in the course of trying for several times, it became disabled. Please how can i enable and unlock it. I tried connecting to iTunnes on my laptop but the iTunnes could not connect, saying the ipad is locked.
Please how can i get the ipad back to use.
ThanksI've never set a passcode on my devices. I already have enough of them between work and my mail accounts, FacBook, yahoo, etc. If i ever do and I have a problem, I'll remember that this information is out here...
Sly -
my iPad is disabled after entering many wrong passcodes by my kid, and is asking me now to connect to iTunes to get enabled again (unlocked), however when I connect to iTunes, it asks me to first unlock the iPad? what is the solution
You need to place the device in recovery mode ...
f you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
Instructions for putting the device in recovery mode > iOS: Unable to update or restore
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present -
HT1212 My ipad was disabled after trying to unlock. I forgot my password, can you help me please
My ipad was disabled after trying to unlock, I forgot my password please help!!
iOS: Wrong passcode results in red disabled screen - http://support.apple.com/kb/ht1212 - entering wrong codes results in progressively longer lockout times until device must be restored completely.
Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password) -
What if you have a situation where Restore did not work. I do. The ipad mini says it is disabled, connect to itunes. When connected, it says that it is locked! I have tried using Recovery/Restore but after it completed, the ipad mini still malfunctions. It does not allow you to start the device. The slide image keeps dancing around the screen. The opening page keeps changing in size and the keyboard types on its own! What can be done to fix this????????
Maybe a reset would help, to be followed by trying the recovery again.
To reset, hold the on/off and home buttons together for about 10 seconds till the Apple logo appears. Then do the recovery.
If this doesn't solve it, I recommend visiting an Authorized Apple Service Center. -
My ipad is disabled and I updated it, then the apple id and password were required I entered it but the itunes says this email cannot be used to unlock this ipad. So what can I do? anybody help me please.
is it the ipad that is disable or your Apple ID?
This article contains instructions on what to do if have forgotten your passcode or your device is disabled:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Contacting apple id support
http://www.apple.com/support/appleid/contact/ -
Ipad disabled after wrong password, is there a reset option?
Our iPad 2 (running iOS 7) is disabled, after six attempts at the password which had been changed 24 hours earlier, it appears to be permanently disabled.
I have work files in apps that were not backed up, is there anyway to recover from this stage?
Please help.How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Pls help I have disabled my iPad after forgetting my password I have plugged into iTunes and it says type in passcode but I don't know it
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Several Apps seem to mysteriously shut down after using them for a while. Face Book shuts down , netflix, Safari, and other Apps. They work fine for a short while, or a long while, and then shut down and it brings me to my regular desktop screen. I've tried restarting by completely shutting down the IPad until I see the apple pic and turned it back on, but the shutdowns of apps continue. Anyone else have this issue? It generally started shortly after downloading and installing IOS 7......
Hi jennyoutwest,
Welcome to the Support Communities!
The following articles will provide some troubleshooting steps for your iPhone.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
The final troubleshooting step would be to restore your device:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition. Before restoring:
Verify that you are using the latest version of iTunes.
Back up your device.
Transfer and sync content to your computer.
Cheers,
- Judy -
IPad Air says iPad is disabled connect to iTunes and STILL not able to use it. VERY UNHAPPY
After uploading IOS8 on 9-17-14 my iPad Air says "iPad is disabled, connect to iTunes.". I have followed all the suggestions from Apple and tried to erase my iPad, but I am VERY UNHAPPY as none of these have resolved the problem. Apple, please provide the support when you have new downloads...
Apple are not involved in tracking/locating stolen or lost devices. Have you reported it to the police ?
Did you have Find My iPad enabled in Settings > iCloud ? If you did and you had iOS 7 installed on it then it should be harder to remove from your account, and the police could try locating it via http://www.icloud.com
Maybe you are looking for
-
How to connect my G4 to macbook Pro
I have a G4 tower that I would like to network (connect) to my MacPro Laptop. I can set up Sharing to get to my G$, but don't know how to reverse the process. Please give me a step by step direction. Thank you.
-
Can't make outgoing call with Skype Connect
I have my Asterisk PBX configured with Skype Connect using SIP with TLS and SRTP. Most of my outgoing calls go through, but sometimes I can't get call out. I was able to leave asterisk console up and collect verbose and sip debug data. Can somebody h
-
Enable drag support at JTree jdk1.4.1
Hi, I have problems to activate the drag support with own TransferHandler at JTree. When I only activate with setDragEnabled(true) it works fine, but drags only the text from node. I'll drag my own class. So I create an TransferHandler myself. But wh
-
Where is pointer pointing to in Call Library Function
I am using Call Library Function (FillString) to call a function in a DLL. I set Parameter 1 to: Parameter: arg1 Type: Array Data Type: signed 32-bit Integer Dimension : 1 Array Format: Array Data Pointer so the Function Prototype below in the Call
-
4 machines all working without a problem after downloading and installing the combo update. Not one hang up or issue. 2 intel machines and 2 power pc machines.