After using the terminal,wireless connection is gone
Yesterday I was looking online to see ''how can I transfer pictures,files from my Nexus 7 tablet to my desktop computer with the usb cable''..
I've found several support forums like this one I'm using right now,someone has already asked a question like mine so I followed the best answer,
I typed the commands in the terminal as the helper suggested,then I restarted my desktop pc,after that it didn't connect any more,it connects wireless usually,but since yesterday no connection:(
I still have the page/link that shows the answer I've followed (the top one) :
http://askubuntu.com/questions/207569/how-do-i-connect-a-nexus-7-to-transfer-files
thank you!!
Hello mediterranean,
Thank you for contacting Mozilla Support. Are you having trouble getting a wireless connection on your Ubuntu machine? This is probably not the best forum for Ubuntu or Nexus 7 questions, but you might try taking a look at this article:
http://askubuntu.com/questions/247993/cant-connect-to-any-wireless-connection-after-updating
Cheers,
Patrick
Similar Messages
-
I don't have a wireless printer, and want to print things off of my iPad. I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.
I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.
-
After using the minidisplay port to connect to a projector, my computer screen does not have the usual sharp resolution. How do I get back that sharp resolution? The computer screen images are now a bit blurry.
Do you mean after the projector is disconnected? It should change back to normal after disconnecting. If it does not, go to System Preferences > Displays and move the resolution setting back to the largest number.
-
Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Error while importing the tables from MySQL using the data source connection
Hi,
I am trying to import tables from MySQL into Powerpivot using the data source connection, if use the import using the Query option its working fine but not with the select list of table option.
when i click on the select list of tables option, i get the below error after selecting all the tables to be imported:
OLE DB or ODBC error.
An error occurred while processing table 'XXXXXXXXXX'.
The current operation was cancelled because another operation in the transaction failed.Hi Bharat17an,
Please provide the detail information when create the MySQL connection in your PowerPivot model. Here is a good article regarding "how to Use MySQL and Microsoft PowerPivot Together" for your reference, please see:
http://www.datamensional.com/2011/09/how-to-use-mysql-and-microsoft-powerpivot-together-2/
If this issue still persists, please help to collection windows event log information. It maybe helpful for us to troubleshoot this issue.
Regards,
Elvis Long
TechNet Community Support -
Weblogic Server 9.2 Crashes when using the JMS Wrapped Connection Pooling.
===== BEGIN DUMP =============================================================
JRockit dump produced after 0 days, 01:05:05 on Thu Sep 16 18:27:36 2010
Additional information is available in:
E:\obopay\servers\EWP_9.2_Domain\jrockit.4516.dump
E:\obopay\servers\EWP_9.2_Domain\jrockit.4516.mdmp
If you see this dump, please open a support case with BEA and
supply as much information as you can on your system setup and
the program you were running. You can also search for solutions
to your problem at http://forums.bea.com in
the forum jrockit.developer.interest.general.
Error Message: Illegal memory access. [54]
Exception Rec: EXCEPTION_ACCESS_VIOLATION (c0000005) at 0x0095065F - memory at 0x00740060 could not be read.
Minidump : Wrote mdmp. Size is 567MB
SafeDllMode : -1
Version : BEA JRockit(R) R27.2.0-131-78843-1.5.0_10-20070320-1457-windows-ia32
GC Mode : Garbage collection optimized for throughput
GC Strategy : Generational Parallel Mark & Sweep
: Current OC phase is: not running. YC is not running.
: GC strategy for GC 36 was genparpar
: GC strategy for GC 37 was genparpar
: GC strategy for GC 38 was genparpar
: GC strategy for GC 39 was genparpar
: GC strategy for GC 40 was genparpar
: mmHeap->data = 0x00C00000, mmHeap->top = 0x10C00000
: The nurserylist starts at 0x01BE75E8 and ends at 0x0CB52440
: mmStartCompaction = 0x00C00000, mmEndCompaction = 0x01C00000
: References are 32-bit.
CPU : Intel Pentium III/Pentium III Xeon SSE SSE2 SSE3 SSSE3 EM64T
Number CPUs : 2
Tot Phys Mem : 3451408384 (3291 MB)
OS version : Microsoft Windows XP version 5.1 Service Pack 3 (Build 2600) (32-bit)
Thread System: Windows Threads
State : JVM is running
Command Line : -Djava.library.path=E:\bea\jrockit90_150_10\bin;E:\bea\jrockit90_150_10\jre\bin;E:\bea\weblogic92\server\native\win\32;E:\bea\weblogic92\server\bin;E:\bea\weblogic92\server\native\win\32\oci920_8 -Dweblogic.management.discover=false -Dplatform.home=E:\bea\weblogic92 -Dwls.home=E:\bea\weblogic92\server -Dwli.home=E:\bea\weblogic92\integration -Dweblogic.Name=myserver -Dweblogic.management.username=weblogic -Dweblogic.management.password=weblogic -Dweblogic.ext.dirs=E:\bea\patch_weblogic901\profiles\default\sys_manifest_classpath\weblogic_patch.jar Djava.security.auth.login.config=E://workspace/Bhopal/LoginModulesConfig/ewp_loginmodules.config -Djava.naming.factory.initial.ewp.remote=weblogic.jndi.WLInitialContextFactory -Dcom.ewp.proxy.is_remote=false -Djava.naming.provider.url.ewp.remote=t3://localhost:7001 -Dweblogic.webservice.verbose=true -Dweblogic.log.Log4jLoggingEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=true Xdebug -Xnoagent -Dcom.sun.management.jmxremote -Xms256m -Xmx1024m -Dsun.java.launcher=SUN_STANDARD weblogic.Server
java.home : E:\bea\jrockit90_150_10\jre
JAVA_HOME : <not set>
JAVAOPTIONS: <not set>
PATH : E:\bea\jrockit90_150_10\jre\bin;E:\oracle\product\10.2.0\client_1\bin;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\Program Files\TortoiseSVN\bin
C Heap : Good; no memory allocations have failed
StackOverFlow: 0 StackOverFlowErrors have occured
OutOfMemory : 0 OutOfMemoryErrors have occured
Registers (from ThreadContext: 0x4B29E378 / OS context: 0x4B29E764):
eax = 00740060 ecx = 00740060 edx = 45a45ba0 ebx = 08c953b8
esp = 4b29ea30 ebp = 00000000 esi = 4b29ea60 edi = 4b29efb4
es = 00000023 cs = 0000001b ss = 00000023 ds = 00000023
fs = 0000003b gs = 00000000
eip = 0095065f eflags = 00010206
Stack:
(* marks the word pointed to by the stack pointer)
4b29ea30: 00981099* 08c953b8 008ab310 4b29eb34 09e5c308 009810ea
4b29ea48: 4b29ead8 0098ecd2 4b29ea60 4b29ea90 48bd8960 48bd8960
4b29ea60: 00000001 45aa0278 45a45ba0 00000007 00000000 08c953b8
4b29ea78: 08512180 4b29ef60 00000000 09d56368 09d563b0 4b29efb4
Code:
(* marks the word pointed to by the instruction pointer)
0095062c: 5e5f0cc4 c35bc033 01b85e5f 5b000000 ccccccc3 0424448b
00950644: a5f06ca3 ccccc300 cccccccc 04244c8b 01a8018b e0830774
0095065c: 8bc88bfe* 40788301 44408b03 af0f0a75 c0830841 f8e08317
00950674: ccccccc3 cccccccc cccccccc 0424448b 00f4888b 158b0000
Loaded modules:
(* denotes the module causing the exception)
00400000-0040ffff E:\bea\jrockit90_150_10\bin\javaw.exe
7c900000-7c9b1fff C:\WINDOWS\system32\ntdll.dll
7c800000-7c8f5fff C:\WINDOWS\system32\kernel32.dll
7e410000-7e4a0fff C:\WINDOWS\system32\USER32.dll
77f10000-77f58fff C:\WINDOWS\system32\GDI32.dll
77dd0000-77e6afff C:\WINDOWS\system32\ADVAPI32.dll
77e70000-77f02fff C:\WINDOWS\system32\RPCRT4.dll
77fe0000-77ff0fff C:\WINDOWS\system32\Secur32.dll
77c10000-77c67fff C:\WINDOWS\system32\MSVCRT.dll
76390000-763acfff C:\WINDOWS\system32\IMM32.DLL
00820000-00a9cfff *E:\bea\jrockit90_150_10\jre\bin\jrockit\jvm.dll
76b40000-76b6cfff C:\WINDOWS\system32\WINMM.dll
71ab0000-71ac6fff C:\WINDOWS\system32\WS2_32.dll
71aa0000-71aa7fff C:\WINDOWS\system32\WS2HELP.dll
7c340000-7c395fff E:\bea\jrockit90_150_10\bin\MSVCR71.dll
5dac0000-5dac7fff C:\WINDOWS\system32\rdpsnd.dll
76360000-7636ffff C:\WINDOWS\system32\WINSTA.dll
5b860000-5b8b4fff C:\WINDOWS\system32\NETAPI32.dll
76bf0000-76bfafff C:\WINDOWS\system32\PSAPI.DLL
6d700000-6d70bfff E:\bea\jrockit90_150_10\jre\bin\verify.dll
6d370000-6d38cfff E:\bea\jrockit90_150_10\jre\bin\java.dll
6d2f0000-6d2f7fff E:\bea\jrockit90_150_10\jre\bin\hpi.dll
6d720000-6d72efff E:\bea\jrockit90_150_10\jre\bin\zip.dll
6d520000-6d527fff E:\bea\jrockit90_150_10\jre\bin\management.dll
6d530000-6d542fff E:\bea\jrockit90_150_10\jre\bin\net.dll
71a50000-71a8efff C:\WINDOWS\system32\mswsock.dll
662b0000-66307fff C:\WINDOWS\system32\hnetcfg.dll
71a90000-71a97fff C:\WINDOWS\System32\wshtcpip.dll
41c00000-41c26fff C:\WINDOWS\system32\DNSAPI.dll
41c30000-41c37fff C:\WINDOWS\System32\winrnr.dll
41c40000-41c6bfff C:\WINDOWS\system32\WLDAP32.dll
41c80000-41c85fff C:\WINDOWS\system32\rasadhlp.dll
68000000-68035fff C:\WINDOWS\system32\rsaenh.dll
769c0000-76a73fff C:\WINDOWS\system32\USERENV.dll
438b0000-438b8fff E:\bea\jrockit90_150_10\jre\bin\nio.dll
41ba0000-41ba9fff E:\bea\jrockit90_150_10\jre\bin\jmapi.dll
41bb0000-41bbdfff E:\bea\weblogic92\server\native\win\32\wlfileio2.dll
43ce0000-43cf8fff C:\WINDOWS\system32\iphlpapi.dll
43d10000-43d27fff C:\WINDOWS\system32\MPRAPI.dll
77cc0000-77cf1fff C:\WINDOWS\system32\ACTIVEDS.dll
43d30000-43d54fff C:\WINDOWS\system32\adsldpc.dll
43d60000-43d70fff C:\WINDOWS\system32\ATL.DLL
43d80000-43ebcfff C:\WINDOWS\system32\ole32.dll
43ec0000-43f4afff C:\WINDOWS\system32\OLEAUT32.dll
43f50000-43f5dfff C:\WINDOWS\system32\rtutils.dll
71bf0000-71c02fff C:\WINDOWS\system32\SAMLIB.dll
43f60000-44052fff C:\WINDOWS\system32\SETUPAPI.dll
44060000-44064fff E:\bea\weblogic92\server\native\win\32\wlntio.dll
44540000-44545fff E:\bea\jrockit90_150_10\jre\bin\rmi.dll
4d010000-4d122fff E:\bea\jrockit90_150_10\jre\bin\dbghelp.dll
"[STANDBY] ExecuteThread: '21' f" id=87 idx=0xf0 tid=4208 lastJavaFrame=0x4B29EB4C
Stack 0: start=0x4B260000, end=0x4B2A0000, guards=0x4B263000 (ok), forbidden=0x4B261000
Thread Stack Trace:
at _mmGetPossibleMovedObjectSize+15()@0x0095065F
at _refIterInit+393()@0x00981099
at _refIterInit+474()@0x009810EA
at _trProcessLocksForThread+66()@0x0098ECD2
at _javalockCouldBeLock+1047()@0x008AB417
at _javalockConvertThinToFat+42()@0x008AC13A
at RJNIjrockit_vm_Locks_convertThinLockedToFatLocked@8+15()@0x00986B1F
-- Java stack --
at jrockit/vm/Locks.convertThinLockedToFatLocked(Ljava/lang/Object;)V(Native Method)
at jrockit/vm/Locks.createMonitorAndConvert(Ljava/lang/Object;Z)Ljrockit/vm/ObjectMonitor;(Unknown Source)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:474)
at weblogic/common/CompletionRequest.getResult(CompletionRequest.java:109)
^-- Holding lock: weblogic/common/CompletionRequest@0x09E5C2A8[thin lock]
at weblogic/store/gxa/internal/GXATransactionImpl.commitStoreIO(GXATransactionImpl.java:99)
at weblogic/store/gxa/internal/GXATransactionImpl.doOperationCallbacks(GXATransactionImpl.java:215)
at weblogic/store/gxa/internal/GXAResourceImpl.commit(GXAResourceImpl.java:1448)
at weblogic/transaction/internal/XAServerResourceInfo.commit(XAServerResourceInfo.java:1333)
at weblogic/transaction/internal/XAServerResourceInfo.commit(XAServerResourceInfo.java:577)
at weblogic/transaction/internal/ServerSCInfo.startCommit(ServerSCInfo.java:514)
at weblogic/transaction/internal/ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1993)
at weblogic/transaction/internal/ServerTransactionImpl.globalRetryCommit(ServerTransactionImpl.java:2658)
at weblogic/transaction/internal/ServerTransactionImpl.globalCommit(ServerTransactionImpl.java:2580)
at weblogic/transaction/internal/ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:278)
at weblogic/transaction/internal/ServerTransactionImpl.commit(ServerTransactionImpl.java:227)
at weblogic/deployment/jms/WrappedTransactionalSession.delistFromTransaction(WrappedTransactionalSession.java:258)
^-- Holding lock: weblogic/deployment/jms/PooledSession_weblogic_jms_client_JMSXASession@0x09D56368[thin lock]
at weblogic/deployment/jms/WrappedMessageProducer.send(WrappedMessageProducer.java:149)
at com/obopay/jms/helper/BaseQueueHelper.sendMessage(BaseQueueHelper.java:107)
The above is the jrockit crash dump file..
I am using the JMS Wrapper Connection Poooling provided by Weblogic. When i use Jmeter and do the load testing for around 10 users, the server gets crashed.
I doubt something is going wrong with the Weblogic JMS Connection Pooling, please help me..The problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM -
I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac
Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.
-
hello..i have purchaes iphone 5 from u.s it's a factory unlocked iphone 5 ..on may14th..it has warranty till may14th of 2014..and i came idia on july and after using the phone for 1moh in india ,when i'm trying to restore it doesn't shows apple iphone menu..it displays the screen image of connect usb cable to restore itunes .and i tried times and it shows the error (-1)..when i have contacted apple the said bring the phone to us we will replace it with new one....now i can't go to u.s so please kindly help me..as soon as possible...please
EDIT 2: It cannot be restored via iTunes 'cause I get a screen message saying that there's no SIM card in the iPhone I'm attempting to activate. The friend who sold me the phone showed me a method for restoring it on the phone itself, without having to send the command through iTunes (connect the phone to computer, turn it off, hold both Home and Power buttons until the Apple logo disappears, release the Power button without releasing Home button, iTunes shows a message about an iPhone in restoring mode, restore, etc.). Thing is, I tried this two or three times on the iPhone 5 but the device still doesn't recognize the stupid SIM…
Please, help -
Help using the terminal.
I'm taking a survey course of languages and we are covering perl this week. I need to write perl script that will parse xml data, but I can't even figure out how to use the terminal.
when I open the terminal I get this line(I subed out my name and username):
firstName-LastName-MacBook-Pro:~ username$
i have tried command from tutorials such as ls and that works, but I can't figure out how to run scripts from a file. I have tried a simple hello world app by typing:
#!/usr/local/bin/perl
print "Hello World!\n";
in text edit saving it as hello.pl then I tried to type hello.pl in the terminal and it says
-bash: first.pl: command not found
can someone explain in simple terms how to run simple programs like this?
thanks, aaronThanks for the help. That was a lot of good information. I did have it saved wrong(as rich text).
It is a common mistake, and I'm glad you avoided it.
However I still could not figure out how to run first.pl. using ./first.pl and ~/first.pl
The "chmod +x first.pl" step is need to mark the file as an executable. As previously suggested by etresoft and me, you can also just use "perl first.pl" and avoid the other configuration stuff.
I downloaded fraise as you recommended. Can you guide me through the part were you said, "modify your PATH environment varialble so it includes a directory where you put your personal scripts." i did not understand what you meant by "Create the file .bash_profile in your home directory (you will need ls -a to see the file after you create it). In .bash_profile".
Any file that begins with a period will be invisible to the Finder. And the 'ls' command will by default not show files that begin with a dot. "ls -a" will so all files in a directory, including those that begin with a dot. This was the Unix way of cutting down on clutter in a directory, by having 2 classes of file name, and the ones with a leading dot were then typically used for things like initialization files.
In this case .bash_profile is a bash shell initialization file. By default Mac OS X Terminal sessions use the bash shell to service the commands you enter at the command prompt.
However, a new Mac OS X account typically does NOT have a .bash_profile, so if you wish to customize various bash behaviors you would need to create the .bash_profile yourself.
And as much as I happen to love the vim (and before that vi) text editors, they have a very steep learning curve, so I'm hoping that etresoft was being humorous when he suggested you should avoid a GUI text editor such as Fraise
And besides, if you start down the vi/Vim path, it will only lead to text editor wars with the emacs uses of the world Since you are trying to get through a programming language survey course, perhaps you can skip the text editor debates until a later semester.
With respect to PATH. PATH is a standard Unix environment variable that contains a list of directories that the shell (bash) will search when trying to find the executable file with the same name as the command you entered at the shell command prompt.
If you do not modify your PATH environment variable, it generally looks like:
echo $PATH
/bin:/usr/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
where each directory is separated by a colon (:). The shell will take the command name you entered, and search each directory from left to right until it find an executable file that matches your command.
What I was suggesting is that you create your own personal directory where you put executable programs and scripts, and then add that personal directory to your PATH environment variable.
Since the bash shell is going to read .bash_profile when you start a new Terminal session and execute the commands it finds in .bash_profile, that is the idea place to customize your PATH
# Assuming you have created a folder called 'bin'
# in your home directory, and you put your personally
# created executable programs and scripts in there
# then the following export command would modify your
# PATH to include your personal bin directory. It does
# not need to be called bin, that is just a long standing
# Unix convention.
export PATH="$PATH:$HOME/bin"
After changing the .bash_profile, you would need to either restart your Terminal session or issue the command
source ~/.bash_profile
I'm a complete beginner when it comes to this stuff.
your help is greatly appreciated.
We all had to start somewhere. In my case the Unix command line prompt was a step up in usability
ps. how to I enclose my code quotes like you did?
Code segments (or anything you do not want the forum software to touch) are enclosed in an identical pair of tags. For example:
... your code snippit here ...
And one final point. etresoft pointed out that the she-bang (#!) line was wrong. I find the following to be the most portable way to specify the #! line
#!/usr/bin/env perl
print "Hello World!
/usr/bin/env is a POSIX standard program that must list in /usr/bin/env, and it will invoke the script interpreter specified as its single argument. /usr/bin/env will use PATH to find the script interpreter, so as long as perl exists in one of the directories specified by PATH, my above #! will always find it, no matter what Unix platform I copy my perl script to, or hand it in for a homework assignment (OK, it is been a lot of years since I did homework, but you might find it useful for your survey course).
etresoft also suggested included the -w option in your #! line. That is not possible when using "#!/usr/bin/env perl", however, you can can just add the "use warnings;" statement to the your perl script and get the same effect:
#!/usr/bin/env perl
use warnings;
print "Hello World!
And if you want perl to look even close at your code you can change warnings to strict
#!/usr/bin/env perl
use strict;
print "Hello World!
{code}
which makes perl really picky about your code. -
TS2529 what do i do when am unable to activate my iphone after using the itunes to update?
what do i do when am unable to activate my iphone after using the itunes to update?
I had something similar (wouldn't connect to my router). I just reset the router, and it went like a dream from there. Myabe your problem too? Good luck.
-
Any unix commands to view network status & activity using the terminal?
I don't use the terminal much and was wondering if there are any unix network commands that let you view packet contents, connection status and other network information. I'm not interested in making any changes, I just want to use the terminal to get network and related information.
Thanks in advance to anybody who answers.
- Mark
G4/450MHz Sawtooth Mac OS X (10.4.7)Hi Mark,
There are tons of commands; it would help to know what you want to know. You can monitor the status of all ports with:
sudo lsof +Mi
That will display all network connections and all listening daemons. A command that is similar to that is:
netstat -a -f inet
Of course netstat specializes in network information and there are lots of different stats it will display.
If you run a firewall, it keeps stats on rule matches. You can see them with:
sudo ipfw -atdN list
As has already been mentioned, Mac OS X comes with tcpdump but there's only one great packet sniffer: Ethereal. It doesn't come with OS X but if you have X11, it can be installed with a packet manager like Fink.
Finally, many running services keep their own stats or logs. You would have to read up on the ones you're running to see what information they provide.
Gary
~~~~
A diplomat is man who always remembers a woman's
birthday but never her age.
-- Robert Frost -
Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??
Hi SandyS_VZW,
Yes tried resetting the wifi connection and problem still persist.
Here it is...to make it clear. Connected thru the same wifi at home...
-> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
-> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
Was there a known issue similar about this case?
thanks, -
iPhone 6 page says that iMovie is a (free) application available for iPhone 6. When I use it on the desktop I need a mouse. Should I expect all controls to be touch-sensitive, or is it possible to use the wireless Magic Mouse? Similarly, if I want to type an email or a long document, is it possible to use the Mac wireless keyboard to enter text? With the iPhone 6 Plus taking over for laptops (phablet), it seems to me that input tools are relevant. Maybe what I'm asking is whether the iPhone6 (OS8) has drivers for these devices. Please advise.
Apps that are designed for iOS devices such as the iOS version of iMovie are intended to be used entirely by touch. It's worth noting that iMovie for iOS is not absolutely identical to iMovie for Mac OS.
-
My keyboard freezes after using the option key... what gives?
I have a 17" MacBookPro with OSX 10.6.8
The problem: My keyboard key freeze after using the " option key" in Photoshop or when downloading a file using the option key.
I can usually use it 2 or 3 times before it makes a chirping cricket like sound… then my keys freeze up.? The only way to correct it is to restart.
Anyone else have or had this issue? it's frustrating. What's the deal?hausman wrote:
tianmiao0304 wrote:
Thanks for your explanation!
Can I just bring my laptop to the nearest service center and get this problem solved directly? You know, usually it will takes several days to receive the backup keyborad, I can't wait
You'll have to phone the service center and ask. (When I lived not far from Lenovo's Canadian service center and wanted to bring in a ThinkPad for warranty repair they said that would be OK with them but my unit would be put on a queue the same as if I'd shipped it in. They simply didn't offer walk-in, while you wait service.)
In the interim it may or may not be possible to reattach the key, even just temporarily, depending on whether it wasn't put on properly at the factory or if it's physically broken in some way. Or you could use an external keyboard until Lenovo sends you a replacement, etc.
I've just call the local service center, he told me that he can not repair individual key, they can just replace the whole keyboard..... How bad luck I am!!! -
In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed from 3 to 4. When LR's HDR merge brings a photo back into LR's library, the stack number does not change and the DRG version isn't included in the stack.
Hi,
The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
and convert your files to DNG.
regards,
steve
Maybe you are looking for
-
How to install Windows 8.1 without optical drive
I just got a ZBook 14 which was preinstalled with Windows 7. I want to use Windows 8.1 Pro which was alsp delivered on DVDs in the packages. However, this machine does not come with an optical drive. How can I install Windows 8.1 on this machine? Tha
-
i have tried the options is past answers, but they dont work or when they say 'go to preferences' I dont have the same options on this Mac that they do any help is most appreciated .. thank you
-
NW 2004's getting port 443 on unix to work ??
I have loaded 2004s portals in my DEV system, (server at our data center at another site)every thing works ok, change the port from 50101 to 443 in VM but can not get to the server on that port. I believe it a UNIX problem because I know that ports u
-
i want to convert aspx file which is render to the client computer, I want convert that page to PDF on button click. Is it possible? If Yes, then how.
-
Trying to put a gas mask sounding effect over Adobe Audition recordings.
What I am trying to do is take a play through of a video game and during certain parts being about to make my voice sound like I am wearing a gas mask using Adobe Audition. I've tried Googling but found little to no information on the subject.