After using Time Machine-Computer Freezes on startup and will not sleep.

I've narrowed down my iMac issues to Time Machine.
After I back up with Time Machine, my iMac freezes on start up ( I have to turn it off and turn it back on again for normal start up) every time I turn it on and it will not sleep.
I reset the SMC, startup in safe mode, and do all of the troubleshooting to get it back so it starts up without freezing (sometimes my troubleshooting works). I've even reinstalled SL a couple of times and that seems to have helped but...
...when I back up with Time Machine, the freezing issues and non-sleeping issue return.
I've just installed the 10.6.2 update and my iMac is now working perfectly, no freezing on start up and it sleeps.
I'm afraid to use Time Machine for fear of the problems returning.
Any ideas on why Time Machine would corrupt my system? Any thoughts on how I can remedy the situation?

Hello m:
The preference file (plist) tells OS X what default and/or user preferences to apply to a device or a program. They rarely become corrupt, but if they do they cause all sorts of odd behavior.
After you trash the preference file and restart, OS X will rebuild the missing file with default values. If you have some personal preferences, you would need to enter those.
Barry
P.S. The preference file I mentioned is located in Macintosh HD>library>preferences
Message was edited by: Barry Hemphill

Similar Messages

Trying to upgrade to Maverick but my disk has Time Machine backup so it cant and will not intall. How do I get around this problem?

I have a 13-inch MacBook Mid-2009 running on IOS X Lion and am trying to upgrade to Mavericks but after the download and starting installation the point where you choose which disk to use it says my hard drive is being used for Time Machine backups so it can not be used. I have turned off the Time Machine but do not know how to remove the backups from the hard drive. What do I do to get rid of the Time Machine backups I no longer actually need and install Mavericks? I have moved all my files to a separate terabyte hard drive but that drive does not have the GUID partition scheme to be used for installation. So I am stuck with one internal hard drive I cant use due to Time Machine and an external hard drive I cant use due to this GUID partition problem. How can I work around this and finally upgrade to Mavericks?

Click here and follow the instructions.
(116122)

After using time machine my users folder cannot be seen, but all information is still intact. Where did it go?

After using time machine my users folder cannot be seen, but all information is still intact. Where did it go?

This is a new feature or bug if you want to call it that in OS X 10.9.3
Until Apple fixes this, here is a temporary work around.
Copy and paste the following command in the Terminal and then hit Enter, followed by your password.
sudo ln -s /Users /Users\ Folder; ln -s /Users/Shared /Users/Shared\ Folder
This will put a link to the Users folder called "Users Folder" on your Hard Drive and a link to the Shared folder called "Shared Folder" inside of the Users folder.

HT1338 Can I do a clean install after using time machine backup?

Can I do a clean install after using time machine backup?

Hi, if I understand correctly yes, but may I ask the purpose of doing so?

How do I recover my files after using time machine restore?

Hello guys! I have been using Time Machine to back up my Macintosh HD into an external disk in August this year. Considering the limited storage of my external disk, I have excluded all of my photos and musics to be backed up. Today I got some problems of my system and started using time machine to restore my computer to the state of August. After restoring, I found all of my photos and musics and other important files which have been excluded to be backed up by time machine are missing. What a disaster. Is there any way to recover all the missing files? Or is it possible to undo today's time machine recovery? Many thanks in advance!

many thanks for your reply. But for the current matter, do you have any other great ideas for me to take back all of my missing files. I will definitely buy a lager storage disk to back up all the files. But how could I solve the current issue? I have already tried the software you mentioned in the lien, it seems no help. Thank you anyway!

Using Time Machine for an external startup drive

I've never used Time Machine; I just kept on using my older backup startup drive software when starting with Leopard three years ago.
My husband is getting a new iMac with an external drive for backup because I convinced him that Time Machine is so easy to use. Yes, I have a lot of faith that Apple knows what it is doing.
However, I don't know how Time Machine works for making an external drive bootable. If it's not super easy for that purpose, I'm thinking that it might be easier to partition his external in setting things up for him, and putting SuperDuper! on one of the partitions.
What do you think? Would Time Machine all by itself be super easy if he needed to startup from the external drive? Do you have to do anything other than to hold down the option key during startup to boot from an external drive backed up by Time Machine?
He's getting an iMac with a 1T drive and an external Iomega 2TB eGo Desktop Hard Drive.
I'm assuming that his new iMac will be coming with Snow Leopard, but it hasn't arrived yet and I don't know for sure about that. But I think if it doesn't come with Snow Leopard, I'd upgrade it for him before installing anything else.
Thanks for any help!
Mary

Thanks so much to you for taking the trouble to help me learn something about Time Machine. I think I've learned enough now to get it set up for my husband without doing anything particularly stupid.
Dave, there's no chance my husband would swing for a second external drive. I had to talk him into having one at all. He's not into managing a computer and doesn't want to think about stuff like backups. Once in awhile I'm in synch with that kind of orientation too, but then I recall the times I've been overjoyed to have good backups for myself... and my backup software is extremely reliable and easy to use.
Pondidni and Thomas, thanks so much for all the links. I've spent enough time reading them that I think I've made up my mind to go with a SuperDuper! partition for the expected way to boot from the external drive. It's also a great reassurance that it would be possible to use a Time Machine backup partition for restoration via an install CD if SuperDuper! should fail, though. SuperDuper! did fail for me once, but fortunately I had another partition with a SuperDuper! backup.
If the single backup drive fails, of course, that would be a nasty inconvenience. On the other hand, at this point I doubt that the actual losses in that unlikely event would impact my husband so horribly as it might for many who have work or school-related necessities stored on their computer. This is mainly a fun computer that he has at home, and if there ever are particularly important documents that he can't afford to lose, extra backups of those files could go onto a CD, DVD, or keychain drive. The chances of needing that are pretty slim.
I know that eventually the backup drive will fail if it's used over a long enough period of time, but he seems ready to follow my advice to only even connect and turn on the external drive once a week and leave it connected only during the time it's actually actively making backups. (Unless some very important work is going on, in which case he knows to keep it connected during that period of time.) An external drive will likely last a good while longer than average under that kind of very limited use.
Thomas, I do also believe in having extra backup external drives and hope to get one for my own computer in the near future. I noticed in shopping for my husband how much less expensively you can get a large external drive now than just a few years back.
Thanks again so much to all for helping me to think through how I can help him get started with his own backups.
Best wishes,
Mary

Problems reading my backed up data on hard drive after using Time Machine

I have a MacBookPro and had to take it in for servicing. I backed up all my data using Time machine. They had to replace my battery, hard drive, and logic board, basically wiping my slate clean. When I got my computer back and plugged in my hard drive time machine came up asking if I wanted to restore a back up. I chose the drive. Then that drive disappeared from the desktop and changed the disk name from "BACKUP" to "disk1s4" and is unreadable. Cannot get anything off the hard drive.
Any idea how I can read my data off my hard drive. I have 3+ years of pictures of my 2 kids and all my music. The rest I could take or leave. But I would be devastated to lose my pictures.
Please help
Thank you
Message was edited by: Jlk51496
Message was edited by: Jlk51496

Jlk51496 wrote:
When I got my computer back and plugged in my hard drive time machine came up asking if I wanted to restore a back up.
Hi, and welcome to the forums.
Do you mean this window?
or this one?
They are very different, obviously.
Try repairing the drive, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Why was your Mac seviced? What did they replace?

Can't find 2011 Microsoft Office product key after using Time Machine

I just upgraded my macbook pro to a 512gb crucial ssd. In order for me to do this without downloading any other software off the internet, I bought an external drive and had time machine back up everything. I installed the SSD, started up the computer and had time machine do its thing and booted everything up onto the ssd. Everything went perfectly up, until I went to open up any Microsoft Office application because they required I put in the product key. The last time I put in the product key was when I first bought the macbook pro about 4 years ago(I installed everything using the disc). What I tried to do was boot the computer using the old hard drive and we have the same story.... I need a product key that I don't have. I even tried installing a product key finder and it found no Microsoft Office product key.
Tomorrow my plan is to use time machine to bring me back to the couple minutes before I setup the new SSD. Before I do that, I want to know what your opinions are on this matter or more importantly, what should I do?
Thanks in advance.

Read the instructions that came with your PIN - they tell you how to get the Product Key from the MS Shop (I think it comes from there, anyhow!)
This link may work... https://office2010.getmicrosoftkey.com/
If not, please repost your query in the more appropriate Office Community forums here...
http://answers.microsoft.com/en-us/mac
Noel Paton | Nil Carborundum Illegitemi
CrashFixPC |
The Three-toed Sloth
No - I do not work for Microsoft, or any of its contractors.

How do I read/open an external hard drive after using time machine?

I have an external Seagate HD that I used to back up files using Time Machine. How do I now read/open/view the Seagate External Hard Drive to see all that was saved for example documents, photos etc?

probe_droid wrote:
TimeMachine does an exact copy of the hardrive that you backed-up.
Not exactly, but close. It doesn't duplicate files and folders that haven't changed. It creates hard links to the originals so that it looks as if they are in the current dated folders, but they really aren't. I think this even throws off the Finder, sometimes. That's why digging through the Time Machine backup via the Finder is not a good idea and will likely cause more consternation.
Pondini has a nice FAQ and troublshooting site devoted to Time Machine. It is well worth everyone's time to take a look at what he has compiled. On the troubleshooting page are links to some tools that will allow you to peek into the backup and see what has or hasn't been backed up.

Using time machine, multiple computers back- up and update

hi all,
to start off, i'm planning to buy a new iMac in the Q1 2009... the comming update, and i'm wondering:
whit time machine, is it possible to let's say back up my macbook.
and whit the new iMac update from the backup so my iMac is in sync whit the macbook?
and when i add, change or kill a file, time machine update's this in the backup, and my macbook will notice this and update the macbook of the backup the iMac changed?
hard question, hope somebody out there can help me by answering or refering me,
cause i realy want this to be true, gheghe!
Kind regards,
Lennart.
Message was edited by: Lennart Hendriksma

Lennart Hendriksma wrote:
hi all,
to start off, i'm planning to buy a new iMac in the Q1 2009... the comming update, and i'm wondering:
whit time machine, is it possible to let's say back up my macbook.
and whit the new iMac update from the backup so my iMac is in sync whit the macbook?
you can use use Migration Assistant to migrate your settings and data from the TM backup of the macbook to the new imac. you'll also have an option to do it during the initial computer setup.
This is a one time operation. You can not use Time Machine to keep computers synced after that. each computer has its own TM backup and they don't interact with each other.
and when i add, change or kill a file, time machine update's this in the backup, and my macbook will notice this and update the macbook of the backup the iMac changed?
sorry, I don't understand what you are asking. please rephrase.
hard question, hope somebody out there can help me by answering or refering me,
cause i realy want this to be true, gheghe!
Kind regards,
Lennart.
Message was edited by: Lennart Hendriksma

Can i use time machine with a airport extreme and a external hard drive

I have connected a hard drive to my airport extreme.
Now i would like to use time machine to back up my computers, and would like to do this on the hard drive which is connected to my airport extreme.
Next step is that i would like to be able to approach my external hard drive via the internet.
Is this possible or not?

Both are possible. However, Apple does NOT support Time Machine backups to AirPort Disks attached to the 802.11n AirPort Extreme Base Station (AEBSn). Doing so will potentially lead to data corruption and is highly not recommended. Please check out this excellent Pondini article for more details. This article also provides the Apple Support references that states Apple's position. Bottom line? If your backups are critical to you, then you may want to rethink your backup solution.
As far as accessing the AirPort Disk from the Internet, the following is the basic steps to do so:
Start the AirPort Utility > Select the AEBSn, and then, note the IP address shown.
Select Manual Setup.
Verify that Connection Sharing = Share a public IP address is selected on the Internet > Internet Connection tab.
Select Disks, and then, select File Sharing.
Verify that both the "Enable file sharing" and "Share disks over WAN" options are enabled.
Verify that Secure Shared Disks = With a disk password. (Recommended)
Verify that AirPort Disks Guest Access = Not allowed. (Recommended)
Select Advanced, and then, select the Port Mapping tab.
Click the plus sign to add a new port mapping.
For Service, select the "Personal File Sharing" option. (Note: This option would only allow Mac clients to access the AirPort Disks. If you want both Macs and PCs to connect, you would need to leave this field at its default value and enter the appropriate SMB ports to the mix of ports to be opened.)
In the Public UDP Port(s) and Public TCP Port(s) boxes, type in a 4-digit port number (e.g., 8888) that you choose. In the Private IP Address box, type the internal IP address of your AEBSn that you wrote down in step 1. In the Private UDP Port(s) and Private TCP Port(s) boxes, type 548. Click Continue.
In the Description box, type a descriptive name like "AirPort Disk File Sharing," and then, click Done.
Click on Update.
To connect to the shared AirPort Disk from a remote location using a Mac:
From the Finder > Go > Connect to Server.
Enter the Pubic (WAN-side) IP address of the AEBSn, followed by a colon and the Public port number that you choose in step 11 of the previous procedure. For example: afp://www.mydyndnsdomain.com:8888 or afp://123.456.789.123:8888
Click Connect.
You should be prompted for your user name and password. The user name can be anything you like; the password should be the Disk password for the AEBSn that you created in step 6 previously.
Click Connect.

Time Machine setup message, some FileVault folders will not be backed up?

I want to set up my Time Machine for the first time on a Mac Pro running Lion. However, a Time Machine message says some folders will not be backed up because FileVault is turned on:
"When using FileVault, you cannot restore individual files in your home directory via the Time Machine browser. However, you can restore all files and folders by using the Restore System from Backup feature of the Mac OS X Installer. Important: Time Machine will perform backups only when you are logged out of your FileVault-protected account."

You're using the "legacy" (pre-Lion) version of FileVault (LFV). LFV is obsolete and should not be used under OS X 10.7 or later.
When LFV is active, your home folder is only backed up by Time Machine when you log out. If you use Time Machine and haven't logged out recently, do that now so the backups can be updated. If you use third-party backup software, the backups may or may not be up to date, depending on how the software works.
After backing up, follow the instructions on this support page under the heading "Migrating a Legacy FileVault home folder from an earlier version of OS X." You might get an alert that there isn't enough disk space to deactivate LFV. If so, see this support page.

Using Time Machine Backup as a Startup Disk IT WOULD BE USEFUL FOR ME!!!

I'd like to be able to connect my external hard drive with TIME MACHINE BACKUP on it to other computers when I am not at home and use it as a BOOTABLE DISK! I looked in disk utility and it said it was bootable, but when I started up my computer and held down the key to choose my startup disk, the so called "BOOTALBE" disk did not appear.
Is it possible to boot up off of time machine backups without copying data???

You can't - once posted in a particular discussions area, that is where it remains - unless a moderator moves it to the appropriate area, or a more appropriate area.
You start here, and then narrow your choice down to the appropriate discussions area.
http://discussions.apple.com/index.jspa?categoryID=1
Since you are running Leopard, go to the Mac OS X v10.5 Leopard area, and below this category is a Time Machine discussions area.
http://discussions.apple.com/category.jspa?categoryID=235

IMac won't shut down after using Time Machine

Here is the thing: My iMac (late 2009, 24", 8 GB RAM) won't shut down when I use my external HD for Time Machine. After the back up I try to eject the external HD but the icon won't disappear on the screen, it only gets blank and is not clickable anymore. It is still visible in the menu of the Finder but with no ejection sign anymore. Programs that were open before won't close even if I use the forced shut down function. But it seems like they are closed as they don't appear on the list anymore. When I then try to shut down the whole system the screen goes black and the wheel turns for hours! So that I finally have to shut it down manually.
This happens only after using the external HD for the back ups and when I then try to eject it. If I don't eject it everything goes normal. If I don't connect it everything goes normal. Sure, you might say, hey leave it plugged in then. But as it is a 3 TB HD I also use it for my MBP so I have to eject it
Is this a known issue or a bug in the system of Yosemite? With Mavericks everything worked really well - no problems at all. On the MBP (late 2011, i7, 8 GB RAM) it also works well. So I am kind of annoyed the I always have to shut the iMac down manually which can't be that healthy for the system.
Any insights on that issue are highly appreciated - thanks a lot!
Birgit

Okay, just realized that the same problem occurs with the MBP after rejecting the external HD
Icon gets blank, cannot be clicked anymore, while shutting down the MBP normally the screen goes black and the wheel is turning forever but nothing else happens. So I have to force it to shut down.
It seems to be a general problem with connecting an external HD once in a while for doing a time machine back up regularly and then eject it. So the question is: who has the same problem or does everybody have their HD permanently connected to their Macs for Back ups? Either by USB or WLAN? It never was a problem wit Mavericks and I don't want to permanently back up my system every hour - once a week is good for me BUT this cannot be adjusted in the time machine settings which would be a very good idea.
Any solution is still highly appreciated !!
Thanks a lot,
Birgit

After restoring from Time Machine to new Hard drive, system will not boot

I replaced my hard drive on my Macbook (2008 model) with a larger drive. I then put in my Snow Leopard disk, and followed the steps to restore from Time Machine backup. a few hours later it said it was restored, but when trying to boot up, I just get a blue screen with an occasional flicker to the Leopard screen. I tried an earlier back up as well but with the same results. Any suggestions??

Same exact problem here just yesterday, folks.
Got a bigger hard drive on my MacBook Pro (15-inch Core 2 Duo) and installed it. Followed the restore procedures from Gizmodo (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p). Then got the blue screen immediately after the chimes.
I only managed to transfer my old disk content by using CarbonCopyCloner.
Having said that, your solution looks uselful, Portland Mac! :
Portland Mac wrote:
... But when I decided to try and just do a fresh install and work my way back through all my software, I started by installing Snow Leopard and suddenly it boots and everything from my Time Machine backup is there...
But I would not say the following:
Portland Mac wrote:
... On a new drive apparently you have to install Snow Leopard before you do a time machine restore.
Am I mistaken, or did you do a fresh install after restoring your TimeMachine backup?
In any case, I found an interesting Apple article that might confirm that there is a problem: [Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac ("Restore System From Backup…")|http://support.apple.com/kb/TS3243]. Or is it a completely different thing?
And another discussion that might give some good advice: [http://discussions.apple.com/message.jspa?messageID=12578529#12578529]. Personally, I will now do as the man says: two backups, on two different external hard drives, using different apps, the other one being CarbonCopyCloner...
For info, and I don't know whether that matters, my backup disk had been full and some past content had been erased automatically by Time Machine. But I don't think this should have mattered...

After using Time Machine-Computer Freezes on startup and will not sleep.

Similar Messages

Maybe you are looking for