After using time machine my users folder cannot be seen, but all information is still intact. Where did it go?

After using time machine my users folder cannot be seen, but all information is still intact. Where did it go?

This is a new feature or bug if you want to call it that in OS X 10.9.3
Until Apple fixes this, here is a temporary work around.
Copy and paste the following command in the Terminal and then hit Enter, followed by your password.
sudo ln -s /Users /Users\ Folder; ln -s /Users/Shared /Users/Shared\ Folder
This will put a link to the Users folder called "Users Folder" on your Hard Drive and a link to the Shared folder called "Shared Folder" inside of the Users folder.

Similar Messages

  • HT1338 Can I do a clean install after using time machine backup?

    Can I do a clean install after using time machine backup?

    Hi, if I understand correctly yes, but may I ask the purpose of doing so?

  • When using Time Machine in Mac Mail, everything works fine but restored files do not appear in MM - On My Mac, and I cannot find them anywhere.  Thanks

    Time Machine Problem: Mac Mail.  Cannot Find Restored Files in Mac Sidebar where they are supposed to go.
    I am using Mountain Lion on my MacBook.  I have successfully used Time Machine in the past, but I have incurred the following problem that I am requesting help on.
    I am attempting to recover Sent  and Inbox Mac Mail sent.  I go through all the steps properly and locating what I want to recover, and after hitting Restore everything seems to be working and I get a message "Restoring 207 files".  The guides say that then I am supposed to find the files in Mac Mail sidebar under   ON MY MAC.  But they are not there nor anywhere else I have looked.  In other words, everything appears to be working fine except I cannot find the restored files.
    Thank you for you help.
    Jerry

    Although you can restore messages from a Time Machine snapshot within the Mail application, it generally won't work with messages that were saved by an older version of Mail. In that case, you have to use an alternative method.
    Triple-click the line below to select it:
    ~/Library/Mail/V2
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu. A Finder window should open with a folder selected. Inside that folder are subfolders representing your Mail accounts. The names refer to the email addresses you use. Decide which ones you want to restore messages from.
    Enter Time Machine and scroll back to the snapshot you want. Select the account folders you want and then selectRestore ... to... from the action menu (gear icon) in the toolbar of the snapshot window. Restore the folders to the Desktop, not to their original location.
    From the Mail menu bar, select
    File ▹ Import Mailboxes...
    Import from the mailboxes in the folders you restored to the Desktop. The imported messages will appear in a new mailbox. Move the ones you want to keep wherever you like and delete the rest. Then delete the folders on the Desktop.

  • PLEASE HELP!! USE TIME MACHINE & RESTORED IMOVIE PROJECT CANNOT BE OPENED

    Please HELP!!!!  Imovie yesterday didnt save any of my project changes so I redid them today. And after I just closed Imovie again it did not save my changes from today. Thats 2 days of editing with no record of the changes
    I use Time machine but I have never needed to restore anything. I have gone into time machine, found the file, hit restore and  saved it on my desktop but I am not finding the file in imovie.
    When I click on the file and select open in imovie it is not opening or if it is, it is not the file with the changes when it diverts me to imovie. So basically I can see the file in Time machine, I am restoring it to my computer but I cannot locate it in imovie with the changes. I can see the file on my desktop but i cant open it to view other than in imovie which ofcourse isnt showing the changes.
    PLEASE HELP!!! IM DEVASTATED!!!!
    I am working from an external hard drive. Yesterday I had the prompt appear that I had no more disk space (on my computer) so today i deleted a bunch of things and didnt get that prompt. And in anycase i am working off an external.
    Please help me!!! I need a saviour!!!

    Have you tried deleting iMovie's preference file?
    Close iMovie and go to your Home folder(YourUserName)/Library/Preferences/com.apple.imovie.plist
    Drag this plist file to the Trash. Don't worrry; iMovie will create a new fresh one when you relaunch it.
    Reopen iMovie and see if it works ok now.
    By the way, if you have more than one iMovie version on your computer, be sure to trash the correct plist.
    iMovie 6 is 'com.apple.imovie.plist' but iMovie 8 is 'com.apple.imovie7.plist' and I expect that iM9 would be 'imovie8.plist' If you find only the one plist and you have only one version of iM, just trash that one.
    Post back if this does not help.

  • Problems reading my backed up data on hard drive after using Time Machine

    I have a MacBookPro and had to take it in for servicing. I backed up all my data using Time machine. They had to replace my battery, hard drive, and logic board, basically wiping my slate clean. When I got my computer back and plugged in my hard drive time machine came up asking if I wanted to restore a back up. I chose the drive. Then that drive disappeared from the desktop and changed the disk name from "BACKUP" to "disk1s4" and is unreadable. Cannot get anything off the hard drive.
    Any idea how I can read my data off my hard drive. I have 3+ years of pictures of my 2 kids and all my music. The rest I could take or leave. But I would be devastated to lose my pictures.
    Please help
    Thank you
    Message was edited by: Jlk51496
    Message was edited by: Jlk51496

    Jlk51496 wrote:
    When I got my computer back and plugged in my hard drive time machine came up asking if I wanted to restore a back up.
    Hi, and welcome to the forums.
    Do you mean this window?
    or this one?
    They are very different, obviously.
    Try repairing the drive, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
    Why was your Mac seviced? What did they replace?

  • After using Time Machine-Computer Freezes on startup and will not sleep.

    I've narrowed down my iMac issues to Time Machine.
    After I back up with Time Machine, my iMac freezes on start up ( I have to turn it off and turn it back on again for normal start up) every time I turn it on and it will not sleep.
    I reset the SMC, startup in safe mode, and do all of the troubleshooting to get it back so it starts up without freezing (sometimes my troubleshooting works). I've even reinstalled SL a couple of times and that seems to have helped but...
    ...when I back up with Time Machine, the freezing issues and non-sleeping issue return.
    I've just installed the 10.6.2 update and my iMac is now working perfectly, no freezing on start up and it sleeps.
    I'm afraid to use Time Machine for fear of the problems returning.
    Any ideas on why Time Machine would corrupt my system? Any thoughts on how I can remedy the situation?

    Hello m:
    The preference file (plist) tells OS X what default and/or user preferences to apply to a device or a program. They rarely become corrupt, but if they do they cause all sorts of odd behavior.
    After you trash the preference file and restart, OS X will rebuild the missing file with default values. If you have some personal preferences, you would need to enter those.
    Barry
    P.S. The preference file I mentioned is located in Macintosh HD>library>preferences
    Message was edited by: Barry Hemphill

  • How do I recover my files after using time machine restore?

    Hello guys! I have been using Time Machine to back up my Macintosh HD into an external disk in August this year. Considering the limited storage of my external disk, I have excluded all of my photos and musics to be backed up. Today I got some problems of my system and started using time machine to restore my computer to the state of August. After restoring, I found all of my photos and musics and other important files which have been excluded to be backed up by time machine are missing. What a disaster. Is there any way to recover all the missing files? Or is it possible to undo today's time machine recovery? Many thanks in advance!

    many thanks for your reply. But for the current matter, do you have any other great ideas for me to take back all of my missing files. I will definitely buy a lager storage disk to back up all the files. But how could I solve the current issue? I have already tried the software you mentioned in the lien, it seems no help. Thank you anyway!

  • How do I read/open an external hard drive after using time machine?

    I have an external Seagate HD that I used to back up files using Time Machine.  How do I now read/open/view the Seagate External Hard Drive to see all that was saved for example documents, photos etc?

    probe_droid wrote:
    TimeMachine does an exact copy of the hardrive that you backed-up.
    Not exactly, but close. It doesn't duplicate files and folders that haven't changed. It creates hard links to the originals so that it looks as if they are in the current dated folders, but they really aren't. I think this even throws off the Finder, sometimes. That's why digging through the Time Machine backup via the Finder is not a good idea and will likely cause more consternation.
    Pondini has a nice FAQ and troublshooting site devoted to Time Machine. It is well worth everyone's time to take a look at what he has compiled. On the troubleshooting page are links to some tools that will allow you to peek into the backup and see what has or hasn't been backed up.

  • Can't find 2011 Microsoft Office product key after using Time Machine

    I just upgraded my macbook pro to a 512gb crucial ssd. In order for me to do this without downloading any other software off the internet, I bought an external drive and had time machine back up everything. I installed the SSD, started up the computer and had time machine do its thing and booted everything up onto the ssd. Everything went perfectly up, until I went to open up any Microsoft Office application because they required I put in the product key. The last time I put in the product key was when I first bought the macbook pro about 4 years ago(I installed everything using the disc). What I tried to do was boot the computer using the old hard drive and we have the same story.... I need a product key that I don't have. I even tried installing a product key finder and it found no Microsoft Office product key.
    Tomorrow my plan is to use time machine to bring me back to the couple minutes before I setup the new SSD. Before I do that, I want to know what your opinions are on this matter or more importantly, what should I do?
    Thanks in advance.

    Read the instructions that came with your PIN - they tell you how to get the Product Key from the MS Shop (I think it comes from there, anyhow!)
    This link may work... https://office2010.getmicrosoftkey.com/
    If not, please repost your query in the more appropriate Office Community forums here...
    http://answers.microsoft.com/en-us/mac
    Noel Paton | Nil Carborundum Illegitemi
    CrashFixPC |
    The Three-toed Sloth
    No - I do not work for Microsoft, or any of its contractors.

  • If i use time machine on lion 10.7, can i put all my info back on mavericks from the time machine i did on lion ?

    Hi everyone, its my first time using time machine, i want to change from lion to mavericks, but i want to know how that actually works, and if i back up my stuff from lion would it match and would mavericks know what am trying to do here !?.... like i want to have all the sime that i do on my lion OSX but On Mavericks OSX

    If you are going to install Mavericks on your existing Mac then you don't need to use Time Machine.  It's good to have a Time Machine backup but when you install Mavericks all of your personal files/documents are left intact and are unaffected.  Only the operating system files and updated applications are modified on your system.
    You may want to consider keeping your Lion backup and setting up the Mavericks backup on a new external hard drive.

  • After changing my mac mini 2009 with a mac mini late 2012, and using Time machine for the reinstallation, Lightroom is operational but Photoshop elements is said to have a license no more valid (code error 150:30). I tried all solution I found to no avail

    After changing my computer from a mac mini 2009 to a late 2012 version, all reloaded with Time machine, Lightroom works fine but Photoshop elements refuses to start (error code 150:30; "license no more valid"...). No solution found on the internet works. Any advice ? possibility to reload the application (I have kept the number of license etc.) ? Thanks in advance to anyone who could help.

    Alain Picard this error often occurs due to incorrect file permissions or corruption of licensing data during the Time Machine restore.  What version of Photoshop Elements were you using?  I would recommend that you remove and reinstall it using the uninstaller located in the Applications/Utilities/Adobe Installers folder.

  • IMac won't shut down after using Time Machine

    Here is the thing: My iMac (late 2009, 24", 8 GB RAM) won't shut down when I use my external HD for Time Machine. After the back up I try to eject the external HD but the icon won't disappear on the screen, it only gets blank and is not clickable anymore. It is still visible in the menu of the Finder but with no ejection sign anymore. Programs that were open before won't close even if I use the forced shut down function. But it seems like they are closed as they don't appear on the list anymore. When I then try to shut down the whole system the screen goes black and the wheel turns for hours! So that I finally have to shut it down manually.
    This happens only after using the external HD for the back ups and when I then try to eject it. If I don't eject it everything goes normal. If I don't connect it everything goes normal. Sure, you might say, hey leave it plugged in then. But as it is a 3 TB HD I also use it for my MBP so I have to eject it
    Is this a known issue or a bug in the system of Yosemite? With Mavericks everything worked really well - no problems at all. On the MBP (late 2011, i7, 8 GB RAM) it also works well. So I am kind of annoyed the I always have to shut the iMac down manually which can't be that healthy for the system.
    Any insights on that issue are highly appreciated - thanks a lot!
    Birgit

    Okay, just realized that the same problem occurs with the MBP after rejecting the external HD
    Icon gets blank, cannot be clicked anymore, while shutting down the MBP normally the screen goes black and the wheel is turning forever but nothing else happens. So I have to force it to shut down.
    It seems to be a general problem with connecting an external HD once in a while for doing a time machine back up regularly and then eject it. So the question is: who has the same problem or does everybody have their HD permanently connected to their Macs for Back ups? Either by USB or WLAN? It never was a problem wit Mavericks and I don't want to permanently back up my system every hour - once a week is good for me BUT this cannot be adjusted in the time machine settings which would be a very good idea.
    Any solution is still highly appreciated !!
    Thanks a lot,
    Birgit

  • Reinstalling Mail into Mail after using Time Machine

    Hi there, I have managed to restore pretty much everything to my MacBook, including all the libraries. My Mail programme looks exactly as it should but is not showing the old messages and attachments. They are in my home/library/mail folder. Should I put them in my HD/library/mail instead?
    Thanks so much.

    I had a go importing into Mail (a box appeared when I used help) and I pointed it at the library/mail folder and it did import, but into the ON MY MAC area, not into the inboxes, sent trash smart mailboxes and so on. Can anyone help? I'm sure it's a simple step, I just don't know what it is.
    Thanks

  • Partition failed, re-install Leopard? Can I use Time Machine after?

    I got a Boot Camp error when trying to partition my MacBook after upgrading to Leopard. The error read something like "boot camp failed to partition drive because some files could not be moved, re-install OSX...". Seems to be a relatively common error, some have achieved a work around by not having to do a complete re-install of Leopard by deleting certain files (please share if you have done this). Others just decided to do a complete re-install, that worked fine for them and then they were able to use boot camp and partition...
    My question is, will my MacBook still be partitioned if do the following:
    1. Backup my entire MacBook using Time Machine to my new never used external drive.
    2. Erase and re-install Leopard on my macbook, end up with a fresh Leopard OS.
    3. Partition my my MacBook HD
    4. Use time machine to recover my macbook the way it was before the re-install

    Ok so correct me if I'm wrong here, this is my situation...
    My MacBook has never been partitioned. I recently UPDATED my MacBook with Leopard. I tried to partition the HD with bootcamp and it didn't, the error has something to do with some files that could not be moved. I have an external drive that should be arriving soon that I plan on using with my macbook. I also want to partition my HD to use windows on my macbook.
    Now, my 2 questions. Should I not use Time Machine with my external drive to rely on all my files being returned to me after I erase and re-install Leopard? What is the easiest way for me to get my MacBook to the way it was before I do this erase and re-install. Because erasing right now seems to be the only way for me to use bootcamp and windows on my machine...

  • New to Using Time Machine, Should I Even Use It in This Case?

    Hey everyone
    So I just started a full Time Machine backup on my Macbook Pro to my Seagate 2TB External Hard drive. I make music, so I have a lot of projects and sounds, which I would like to have backed up just incase something happens to my Macbook. I have around 250GB of stuff on my computer, and it says that's it's going to take around 12 hours to back everything up. I'm new to using Time Machine, so I have a few questions:
    Will this occur all the time if Time Machine is running? Like, will it keep updating the data I already have and replacing it, or will it just backup new changes/files after this first backup is complete? Is there an option/preference I can change so it only backs up new changes/files instead fully backing up every day?
    Does Time Machine store the files/folders onto the external hard drive, or is it just like a backup file that you run which backs up everything?
    Thank you guys in advance, really need help with this!

    You should not use a Time Machine backup drive for permanent data storage. Use a separate drive for that purpose. It's much safer. Time Machine will over time delete files if they are deleted from the source drive which makes Time Machine a poor long term storage option. If you want a permanent storage option buy a separate drive for that purpose, but do not use Time Machine. User other backup software:
    Suggested Backup Software
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

Maybe you are looking for

  • How do I get a picture of my screen and then put it in a 'reply' email message? Please!

    I need to take a picture of the screen showing my test results that I took on a website and then email it. When I click on my 'prnt scrn' button and then paste it into my email message it shows up correctly but then when I actually send the message,

  • Borderless 8.5x11 on DeskJet 9800

    I've seen this question asked in various forms all over the forums and net, but it's rarely this printer with this paper size, and it's rarely this printer and these dimensions. So, here's hoping someone here will have an answer for it. I am having a

  • InDesign text out of sight in page!

    Dear All, I have one problem in text out of sight in page! using InDesign CS5.5 windows.@@ In my InDesign document have 7 pages, and 3 column text flow, When I removed the 3rd column one anchored text frame it will "text out of sight" into the 2nd co

  • Vertical text in Excel output

    Hello, I am designing a report with Excel output using BI Publisher. The problem i am facing is that the text direction (vertical) in the RTF file does not remain the same in the Excel output. Do you have any solutions/workarounds for this problem? T

  • Acrobat X - Images edited in PhotoShop shift position

    In A9 and previous, I would use TouchUp Object Tool, edit the pic in PhotoShop, attach a profile, save the file, and the image would update in the PDF. When I do this now, the image shifts position. It seems to be scaling itself to fill a frame that