After v1.90 BIOS update Satellite Pro A300-1EA wont boot up

I have just upgraded my laptop to the new BIOS as stated in the title but after doing it my computer now wont boot up at all. I just get a blue screen with it asking me to do a CHKDSK because there might be a virus or that the hard drive isn't connected properly (when it is), and it just keeps rebooting.
It wont start in safe mode either. Anyone else had the same problem and if so, how do I get my laptop back?? :(
Thanks for any replies.

Please don't be mad on me but I think you really didn't read users manuals you got with your notebook. There is exactly described how you can have factory settings again.
So, now you are 100% sure that recovery image is not on the HDD but you don't know how to have factory settings again. Strange.
Remove battery, connect AC adapter only and disconnect all attached external devices.
Start your notebook and enter BIOS settings. Set it to default settings and try to start OS again.
What happen exactly?

Similar Messages

Re: Satellite Pro A300-1EA - Difficulties in BIOS update

Hi there,
I attempted to update BIOS on my new Satellite Pro A300-1EA (PSAG9E-001001EN) as prompted by Tempro, from version 1.50 to 1.90. The system froze completely during BIOS flash, after waiting for 1 hr, I decided to turn off the power and pray for the best. Thank heavens, everything still works, but the BIOS is still v1.50, not been updated. I have now read so many posts on the forum regarding blotched BIOS update and am now very cautious regarding undergoing any BIOS updates at all.
My questions are: Are there any issues regarding this particular update and/or with the InsydeFlash facility? Are BIOS updates all generally so tricky that they best be avoided? What are the alternative ways to update BIOS, hopefully less dangerous? Also, could there be any potential damage to my laptop related to this miscarried BIOS flash that I should be aware of?
Many thanks indeed!
Monsteress

You can feel you lucky, buddy! :)
Im surprised that your ROM module is not damaged or something else. In most cases this happens if the computer freezes during the update.
Let me give you a word of advice. You should only update the BIOS if its necessary or you have problems/issues with the notebook. You can ignore the messages from TEMPRO if your system runs properly. For example I never update the BIOS if my notebook runs perfect Never touch a running system ;)
Otherwise follow the tips posted by Akuma Before you update the BIOS close all running programs, disable AntiVirus and Firewall and connect the AC/DC adaptor.
On my Satellite U400 I have updated the BIOS without problems.

Cooling behavior after BIOS Flash - Satellite Pro A300

Hello everybody,
I have two laptops, Satellite Pro A300 and Satellite A300. Both have the same configuration, C2D E8300,2GB,ATI 3650 512MB and so on.....
Today I flashed BIOS to the latest version (from V3.90 to V4.20) on both of them. On the version 3.90 cooling was OK, fan worked only when it was necessary. But now after flashing the BIOS fan works permanently, it does not stop.
What I did make, in Vista's Power Options under Toshiba Power Saver I changed the Cooling Method from Maximum Performance to Battery Optimized, the cooling reversed to the normal operation, but the cover (keyboard area) became hot a little bit.
My question is, what is the problem with cooling in the new version (v4.20)? And how to solve this problem?
Again, problem didn't exist before BIOS flashing and the problem is on both computers.
Thank you for your help!
Best regards,
Osman

Hi mate
Thanks for the feedback
> So what do you recommend me, to stay on Battery Optimized mode? Generally speaking, what's the difference between Maximum Performance and Battery Optimized modes in Power Saver?
Usually its advisable to use the Battery Optimized mode only when the AC adaptor is not connected to the notebook and the notebook uses only the battery power.
In such case the notebook does not waste the power using Battery Optimized mode and you could use the notebook much longer using battery only.
Using Battery Optimized mode the CPU and cooling modules run with lowest performance and the CPU does not create high heat dissipation.
This leads to a lower internal temperature and lower usage of cooling modules.
Bye

Satellite Pro A300-28R: slow boot and freezing on Explorer/Internet

I have recently bought a Satellite Pro A300-28R and I am quite disappointed about the performance.
1) From the specs it looks like a decent laptop but with booting time of about 3 minutes, "please wait" it is surely not impressing me given the fact that i have not installed anything yet...
2) I will try to uninstall applications like tempro but still I am puzzled by the slow reaction on internet pages.
For example when i go on google and start typing something most of the times the cursor freezes and i have to wait a few seconds before I am able to see what i am typing.
I have only bought it last Friday and I have not used much but surely a bit of a disappointment so far.
Any ideas why the cursor freezes on google or on the internet explorer toolbar?
for info i am using Vista Business OS and Internet explorer
any help welcome

Hello
About slow boot you can read very interesting and useful thread under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
I hope this will help you to understand why this can happen.
After first start you can be faced with this behaviour. Few days updates will be downloaded and installed in the background and you will notice high HDD activity. These activities can slow down notebook performance and what you can notice is this slow typing reaction or freezing video play.
So my advice is to disable automatic updates and set it when updates are available you should get notification but you can start it manually. These all possible vista updates installation is for me big mistake because if you check available updates many of them are optional and some of them are driver updates (3 of them) these updates must not be installed.
Maybe you should install recovery image again. don't connect it to internet and do what is described in posted thread. After optimizing preinstalled OS change settings for Windows update and connect it to internet. Check list of available updates and install important and recommended stuff only.
I do always so and I am happy with my Satellite P200 and new A300. Both of them runs well and I am satisfied with performance.

Satellite Pro A300 PSAGDE re-booting when plugged in

I have had this laptop put away for a while as I couldn't work through this problem, but I'm having another try.
The laptop is a Satellite Pro A300 PSAGDE.
The problem I am haiving is that the laptop would re-boot whenever I connect the PSU, but not when using a live CD (Ubuntu).
I would like to try and flash a replacement BIOS to see if that will solve the problem.
Unfortunately the software needed to flash the BIOS requires the laptop to be plugged in.
Is there any way around this problem?
Can I fool the software into thinking it is plugged in?
Is there a way I can revert/repair the BIOS in any other way as obviously the problem hasn't always been there.
Thanks
Message was edited by: miainphillips
Message was edited by: miainphillips

So once again: notebook runs fine using battery power but reboot always (in the loop????) when AC adaptor is connected. But using Live CD the notebook runs ok even if the AC adaptor is connected.
Right???
>> I think it may be a BIOS issue because the laptop will run without an issue when booting a live cd, even when it is plugged in.
If the unit runs ok using Live CD, then this means that this cannot be BIOS issue because BIOS does not depend on installed system.
Therefore in my opinion its definitely not a BIOS problem.
I think you should firstly disable the automatic reboot when an system crashes Win 7 is configured to restart immediately when a BSOD happens and this happens too fast to see the error I think you mean this by automatic reboot
Disable this by following way:
1)Control Panel -> System & Security -> System -> click the Advanced system settings
2)Locate the Startup and Recovery section near the bottom of the window and click Settings button.
3)In the Startup and Recovery window, uncheck the check box next to Automatically restart.
4)Now click OK and restart the unit
In my opinion the system crashed and therefore the notebook reboots

During BIOS update Satellite Pro A60 went down and hasn't started

Hello everyone,
I have a Satellite Pro A60 and I updated the bios. Halfway the update, my laptop went down and hasn´t started since. All it does is give a couple of beeps (trying to tell me the bios is corrupted, I suppose) and shuts itself off again.
Tried to start with the (~) key pressed down (a tip I got from a friend), but no succes.
I currently live in a country where there is no Toshiba dealer available and I rather not ship the laptop to have it repaired.
Does anyone know of a way to fix this? Any help would be greatly appreciated.
Thanks

This sounds not good.
If during the POST the BIOS detects a problem it will normally display a visual error message on the monitor explaining what the problem is. However, if a problem is detected before the BIOS initializes the video card or a video card is not present or not detected then the BIOS will play several BEEPS through the speaker to let you know there is a problem.
Depending on the type of the BIOS you have the BIOS may play beeps in a specific pattern to indicate what the problem is, or play the same beep a number of times indicating the problem.
In your case its possible that you have used a wrong BIOS or a wrong BIOS procedure. Both can damage the motherboard.
To prevent such damages and any mistakes Toshiba has published the FAQ document.
How to update the BIOS on most units!
This you should read before doing any BIOS updates!
Unfortunately I dont think that you can solve it yourself. I think you should ask the ASP for help.

BIOS Update Satellite Pro L10

I downloaded a BIOS update for my Satellite PRO L10 notebook, when I try to install I receive the following message
The input file EW3I1A04.WPH cannot be found, a valid filename must be specified to continue.
Any advice appreciated
Regards,

Hello guys
Mochitas I don't have SP L10 but I would like to know how you make BIOS update. SP L10 is old notebook models and if there is something wrong Toshiba have had enough time to replace offered BIOS update. I cannot imagine there is something wrong.
Pavlaras if you open zip file you will see exe file and it is logic to use this file to start BIOS update. I really don't understand how you come to EW3I3A26.WPH file. If you are not familiar with BIOS update why you make such risk before picking up some info how to do this.
I must say that I believe you have damaged BIOS chip and because of that you cannot start your notebook. Sorry but only authorized service provider can help you.

Wireless is ON but Satellite Pro A300-1EA says it's OFF

I have had this computer since April will no problems.
My wireless is on (on switch and func key) but my computer will not connect to a network, the icon has a red cross through it and when I try and diagose I keep being told to switch wireless on. I have restarted countless times, I have not downloaded any new software or run any updates since the last time it worked. I have checked the device manager, the drivers are up to date and there are no conflicts. I have tried diabling the anti vrius software but this has not helped.
I am currently connected through an ethnet cable. This has happened once before but after several hours it started working again. No such luck today.
The connectivity doctor acknowledges that the switch is on - but when I dianose I'm told to switch on the wireless.
Please help!??

Hi
Maybe you should simply reinstall the Wlan driver again. thats definitely worth a try
Go to device manger and uninstall the WLan driver
Then reboot the notebook and after windows has booted again, try to install the newest WLan driver. After this procedure reboot the notebook.
Furthermore go to device manager again and check the Wlan card properties.
There is a tab called Advanced. There you can find many different options and there could be an option which enables/disables the Wlan card too.
Last but not least check if there is no conflict between the WLan configuration tools like Atheros WLan configuration and the Windows WLan settings.
If you are using Atheros Wlan tool then Windows Wlan settings should be disabled (unmarked).

Satellite Pro A300-1EA webcam not working

Hi,
About a month ago my webcam stopped working. I tried various solutions and then formatted my hard drive, installing a 32-bit Windows 7 Home Premium. I still can't get the webcam to work. Could you please advise?
Kind regards,
Witek

reinstall the webcam software which you can find on the Toshiba EU driver page...
this should fix the issue...

Satellite Pro A300-1DZ does not find HDD after BIOS update

Hi everyone,
I have recently purchased a secondhand Satellite Pro A300 1DZ.
Put a fresh copy of Windows xp home on it.
I then went on to install all the drivers needed from Toshiba's own site and at the end of this I thought it may be a good idea to update the bios????
OH DEAR what a big mistake.
Now the netbook will NOT start windows.
So I thought thats ok I will just start from the begginning and reinstall windows again, but it is telling me it cannot find a hard disk on my netbook?
aaaaaaaaaaaaaaahhhhhhhhhhhhhhh I am going crazy,
Could someone please tell me how to fix this? Thank you x

Hi
I think the option SATA mode has been set to AHCI and therefore the Windows XP cannot find the HDD.
This is because of the SATA controller.
You can set the SATA mode from AHCI mode to compatible mode and this will allows you to install the Win XP on the notebook without the usage of SATA drivers.
So, youve got two options if you want to install Win XP:
AHCI mode -> but you have to include SATA drivers
Compatible mode -> Win XP installation possible without the SATA drivers

Bios update from 1.60 to 1.70 on Satellite Pro A300

Satellite Pro A300 got new infromation from Toshiba Tempro that there are new
bios available. I was downloaded and upgrading bios from 1.60 to 1.70. The problem are
that machine going totally JAM middle of bios upgrade. InsydeFlash show that bios upgrade
are going "Erasing and writing" but nothing happened. Machine is totally JAM!
What I can do now? I have power on machine and not yet rebooted from power key because
I fraid that bios update is not ready yet.
PLEASE HELP ASAP!

Hello
Please contact nearest authorized service provider and ask for help.
If BIOS update is not done well the BIOS chip can be damaged and notebook will be death.
Contact them and explain the situation. They will help you.
By the way: what do you mean with JAM? Is notebook going OFF in the middle of BIOS update?
Have you switched it OFF?
What was happening exactly?

Satellite Pro A300-28V - My bluescreens disappeared when BIOS was upgraded

I am curious about this. The machine is an Satellite Pro A300-28V with Vista32/Win7.
Had problems with bluescreen dumps referring to "iaStor.sys". I was just about to send the laptop in for repair when I made this last effort to solve the problem. Upgraded BIOS from 1.9 to 2.1-Win.
Suddenly my system image succeeded!! Even to an Iomega home network HDD. No hang-ups!
No bluescreen dumps even at "cold" start-up (after a night off)!
At the moment I let the computer home in sleeping mode while I am at work. Let's see if it managed a day without dumps.
What is the technical difference between BIOS 1.9 and 2.1? Any idea if it has anything with iaStor.sys to do?
/ssstsg
Spelling was edited by: ssstsg

Hi mate
This is really good news that your BSOD displeasured after BIOS update.
The BIOS give instructions to power-on self test (POST) and provide basic information about how to handle some notebook components, like HDD, ODD, memory which are needed to load the operating system.
Who knows, what has been changed in the update but the main thing is that everything work and the update solve your BSOD
>Any idea if it has anything with iaStor.sys to do?
iaStor.sys is a part of the SATA driver which is need for recognizing the HDD using the AHCI mode.

Satellite Pro A300 - shutdown issue

I have a brand new Satellite Pro A300-15V, which I have downgraded from Vista Business to XP Professional, using the original recovery disc.
Now I have problem shutting down the computer. When I click "Turn Off" it just shuts down and then restarts after a minute or two. Also, I can't bring it back from hibernation unless I shut it down on the button first.
Can anyone help, pls?

Hi guys
Im not 100% sure if my advice could help you but what you should do is firstly BIOS update to the latest version. Ive noticed that new BIOS were released last week for some A300 notebooks series.
After the BIOS update disable the WakeUp on LAN settings in the BIOS.
You could also disable the options like: "Wakeup on keyboard" and "Critical battery WakeUp"
*@cfrigerio:*
It seems youve already disabled this function but please check also the LAN card setting in the device manager -> LAn card properties -> Advanced tab.
There should be an option likes Wakeup on link, Wakeup using APM mode, etc
Disable these options!
Furthermore please check if any 3rd party applications dont wakeup the notebook.
Sometimes the scheduled tasks could be responsible for the irregular waking ups.
Good luck

Why does Satellite Pro A300 not start when the power button is pressed?

Suddenly my new Satellite Pro A300 will not start correctly when the power button is pressed. The situation is this: When I press the power button the Toshiba opening picture (Leading Innovation) appears and disappers quickly. Then there is a black screen for about 30 seconds. Then there is a rectangular frame with the text Microsoft Corporation underneath. And nothing happens however long I wait.
In order to get on with the starting proces I then shut down the computer by pressing down the power button until the computer stops. ("The hard way to shut down")
Now I press the power button shortly to turn on the computer. Then the computer starts normally with the Toshiba opening picture and after a few seconds I am asked to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
What shall I do to get a normal start procedure?

When notebook starts normally (after choosing normal mode) shut down your notebook properly using START > Shut down option. Next start should be normal.
When the OS is switched down on irregular way you will be always asked how to start it again (safe or normal mode).
The same happen on my Satellite A300.

Satellite Pro A300 crashes with blank screen

I have a Satellite Pro A300, AMD CPU, ATI graphics, Vista.
The system worked fine for a year but a few months ago it started crashing, the screen went blank, not blue, anything running, like music, stopped. This can happen after several hours or minutes, or even whilst it is re-booting. All my software is up-to-date, both from Microsoft and Toshiba. I have rebuilt my system from scratch and the symptoms came back.
At first I thought this might be a heat problem but I have monitored this but I don't think this is it. It has crashed seconds after leaving sleep mode when it has not had a chance to warm up.
Anybody got any ideas?
Simon

Hi buddy,
Theoretically it could be an overheating problem so the screen went blank due built in overheat protection...
You should try to clean your notebook using compressed air spray. This could blow out the dust from the cooling ventilators and therefore its not necessary to disassemble the notebook.
In your case I would recommend reading this article:

After v1.90 BIOS update Satellite Pro A300-1EA wont boot up

Similar Messages

Maybe you are looking for