After Vista rollback all files locked by TrueSuite

A while back I rolled back in Windows Vista to a previous date and as a result all of my files locked by TrueSuite have become corrupt and I cannot open them, move them, delete, etc.
I have tried to delete from command prompt but that didn't work either.
Is there any way I can delete it?
Thanks for any help.

Hi
Did you try to delete these files after the TrueSuite has been uninstalled?
I think its worth a try.
Remove the TrueSuite from the system, reboot the notebook, clean the OS and the registry using the CCleaner and reboot the notebook again.
Then check if the locked files could be deleted again.
Greetings

Similar Messages

HT1820 how do you restore the hard drive with install cd after zeroing out all files? when i try to boot install disk or from usb a kernel panic screen appears telling me to restart my computer.

everytime i try to boot installation a message appears saying 'you need to restart your computer. holddown the power button until power is off then press down power button again'. i read that it was a kernel panic. cant boot into any modes but recovery mode with disk utilities but my wireless internet says no wifi hardware installed and sometimes startup manager. this just started after i erased the hard drive and had it overwritten with zeros. its a macbook pro 7,1. bought it in 2011, i think it was made in 2009. it has 320 gb of empty space right now and nothing ive tried seems to work. please help!!!! there is also no os x installed right now due to me zeroing out the hard drive how do i repair it so it will boot to installation?? i can also enter single user mode but do not have root access?

You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

I can't enter any values in JTextField after loading the flash files.

Hi to all,
In my application I have two panels. One panel has JTextField and another panel i loaded flash files.
The flash files are build by CS4. I'm using JDIC to load the flash files. While open the application i loaded flash file and I try to enter any input in the textfiled, but I can't. After minimize and maximize the application I can enter the values. This problem happens only after I change the jre version from 1.6 to 1.7.
While loading flash files I'm getting the below exception.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNative(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unknown Source)
pls give me a solution.
Thanks in advance...:)

I can't enter any values in JTextField after loading the flash files., locking.

200n Keyboard - Caps Lock inverted = no numbers + all files highlighted

Factory o/s Vista Home + recovery CD
Faults occurred sometime after installing wireless printer. Computer left unattended. Son heard lots of beeping.
Caps lock worked but text was inverted which also resulted in no numbers. Selecting a file from a list resulted in all files above being selected.
Many things tried, restored to previous point, keyboard checked with MS diagnostic tool OK. Eventually keyboard stopped working (same with external USB keyboard) and it was impossible to restore using Recovery disc.
Paid to have system restored to Factory settings.
Memory and HDD checked and refitted. On final update, no 20 of 27 - bleeping and small Filter Key window appeared and kept on appearing 10/20 times during updating. Still both problems occurred.
Purchased new HDD and Win 7 upgrade
Installed XP pro sp2, could not type numbers in product key
Clean installed Win 7, Caps lock inverted and no numbers with Keyboard, USB keyboard and On-line keyboard. Again all files highlighted.
System Trouble Shooting – No changes or updated necessary.
System Restore – Error 0xC0003005
In Safe Mode – removed Norton leaving MS net 4, MS Silverlight, NVDIA driver.
Wireless mouse works.
Filter Key window appears sometimes.
Action Center – Richo memory stick controller incompatible, no card reader driver.
Can access msconfig but not mskey or msreg
Lenovo 3000 200n 0769 BWG
TY2BWUK s/n xxxxxxx 08/02
Win 7 Pro build 7601 sp1 BIOS 68ET35ww (v3.03)
Keyboard std PS/2
Moderator Note; s/n edited for member's own protection
Solved!
Go to Solution.

Hey Bellcart,
Thanks for coming back with your solutions! I'm sure what you went through has helped other forum users too!
Cheers,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Vista problem with Dreamweaver locking files indiscriminately - I'm not alone

I've seen questions posed in the past about Vista locking files - and I am having the exact same problem, which I posted about a while ago. Today it happened to me again.
There appears to be no pattern as to why this happens. Was happening to me continually until a few weeks ago. Then it stopped without me taking any course of action (just putting up with the annoying bug is all I could do).
You just have to remember to save the file under a different name to ensure that you don't lose your original file. The original file does not appear in the File Manager window (after you close down DW, nor does it appear in the Trash bin - it's just gone).
Initially I thought it may be due to having the file open, checking it in Firefox and possibly FF taking over the file, so it gets locked by DW. Today, I only opened the file (no checking in a browser at all) made a minor correction and I was locked out of the file.
Co-incidentally, a few hours ago, I found a website via twitter where this seems to be a known issue, but no there appears to be no response from Adobe about this bug. http://www.sherylcanter.com/wordpress/2009/05/locked-vanishing-files-in-dreamweaver-and-in design/
Previously, I used to restart the pc and I'd lose the file altogether (as explained above). After reading the above website, I'm going to leave DW open for a while to see if it's true about the file 'unlocking itself'. Thankfully,, this time, I did backup the file just in case. In the past I'd lost a fair amount of work, that I'd had to recreate - very annoying !!
I thought I'd post up a graphic of the error messages - to see if others are seeing the same thing. This will need to be bought to the attention of the DW tech team, but not sure how they can address the issue as it is a difficult thing to reproduce on a consistent basis.
AN UPDATE; Checked for the file in Windows File manager - the index.html page is not listed in the sitefolder. Back to Dreamweaver, you can still see the locked file, do a refresh and the index.html file has disappeared.
I open index2.html (the resaved version of index,html), rename it to index.html and it allows me to do so this time round.
PS: At the same time I opened inner.html, made a change, no problems with the file locking.
Weird !!
Further update:
Just found a reply by David Powers here: http://forums.adobe.com/thread/437034?tstart=30
I had tried to do a search using similar keywords when this started happening to me months ago - couldn't find anything at the time.
I even posted to a private forum where people should have known about this issue - but it was never responded to.
Will see if this fix works for me.... though I can't understand why it only does this occasionally - if someone needs to take control of the folder, surely it should be happening all the time.

Nadia,
Although Dreamweaver "reveals" and demonstrates it, I think that it's a deep-seated Vista permissions issue.
It's random and occurs on files I create from scratch and files I receive from others.
Full permissions for every single user and group on my PC doesn't work.
"Take ownership" by my account or Administrator or Administrators or System or Everyone or Authenticated Users doesn't work.
UAC deactivation doesn't work.
Command prompt to unset attributes (like read-only) says it ISN'T read-only, but the right-click properties show that it is.
Only this works so far.
Activate Vista's Administrator account (be sure to then set a password for it).
Log in as Administrator, and the issue no longer occurs.
Here's a link for instructions on how to activate the Vista Administrator account.
Enable the (Hidden) Administrator Account on Windows Vista [The How-To Geek]
I'm open and hopeful for a better solution, but for now I've got work to do, so I'm using Dreamweaver logged in as Administrator.

Locking all files in a folder.

I've my photos currently in a dated folders - I'd like to be able to lock them all at the same time.
I've experimented with locking the top level folder, but, unlike Windows, which asked me if I wanted to lock sub-folders/anything in them, this just seemed to do the top level. Individual files didn't seem to be locked.
I've done a bit of a search & LockMeBaby ( http://soramimi-works.net/software.shtml ) seems to do what I want it to. Is it what i need, or is it possible from within Snow Leopard to (easily!) lock files in multiple folders all at the same time.
Also, if I do lock the folders will it be like Windows in that I can still add files to the folders - it just grumbles when I either delete them or try to re-save them after editing.

Emmadw wrote:
I've my photos currently in a dated folders - I'd like to be able to lock them all at the same time.
I've experimented with locking the top level folder, but, unlike Windows, which asked me if I wanted to lock sub-folders/anything in them, this just seemed to do the top level. Individual files didn't seem to be locked.
I've done a bit of a search & LockMeBaby ( http://soramimi-works.net/software.shtml ) seems to do what I want it to. Is it what i need, or is it possible from within Snow Leopard to (easily!) lock files in multiple folders all at the same time.
there is no built in tool for this but you can easily make one. this is esy to do from terminal. the following terminal command will lock everything inside a given folder
chflags -R uchg /path/to/folder
and this one will unlock everything
chflags -R nouchg /path/to/folder
you can automate this if you wish. you can make a service using automator which will be in the right click menu in finder and lock everything recursively.
Also, if I do lock the folders will it be like Windows in that I can still add files to the folders - it just grumbles when I either delete them or try to re-save them after editing.
no, if you lock a folder you won't be able to add anything to it while it's locked.

Multiple flat files appended, is file locked until all processed?

Hi All,
Have a scenario in place where we are collecting multiple flat files on ECC and using append mode on the receiver file adapter to create a single file for final output. We are only interested in submitting the output to it's target after all files sent to PI have been appended.
Does PI 7.0 lock the appended file until all files have been appended so I am sure I end up with a complete single file on output? If not, what are my options to ensure a completely appended file is output? Would it be a viable option to pass the appending file through another sender file adapter using 'msecs to wait before modification check'?
Thanks!
Don
Edited by: donald.meredith on Dec 1, 2011 2:31 PM

How many files are you collecting from ECC and appending at receiver side and how much time it is taking to complete the process?
if its possible to schedule your business to read data from FTP after completing append then no worries, else sometimes it creates trouble.
The option you mentioned is reliable one , but you ended up creating one more interface.
Regards,
Raj

XSL File locked after error

Hi,
I've tried to modify a XSL File that I created with Forms Builder. It's all because I want to add some functionality.
Now here is my problem. Because the XSL is not perfect at the moment, it produces some errors while parsing. Unfortunately after that the file is locked on the file system so that I can't change it anymore. So debugging is a little bit hard because I know the error but can't fix it.
Finally my question: Is there a possibility to unlock the file so that I can edit it again (without restart)?

Hi,
Normal PCD objects can be unlocked through System admin->Monitoring, not sure if this applies to XSL files as well.
If the file is locked by a process and cannot be released, you could process explorer to search for the file handle and delete the "file lock" the process has.
See
http://www.microsoft.com/technet/sysinternals/utilities/ProcessExplorer.mspx
dagfinn

After updating Mavericks all my desktop files and folders were deleted

I just updated to Mavericks and after going through the registration and settings process I have a desktop wiped clean. No personal files, no personal folders, Thunderbird email reset and deleted, etc. All previous settings were reset. All files were deleted that weren't part of Apple's default files or the Mavericks OS. They don't appear in finder, or spotlight, or when I open an app to try and view 'recent documents'.
How does this happen?

Did it have you create a new user during your first startup after installing Mavericks? If so, check your "user" folder to see if you old account is still there. You can follow these steps the to restore that user account:
1. If your computer is starting up as if it is a new / clean install, create a dummy user (i.e. User name: test).
2. Get to the desktop logged in as this dummy user and navigate to the "Users" folder. In addition to the dummy user you created and the "Shared" folder you should see a folder for your old user account. Take note of the exact spelling including cases of that user account.
3. Go to System Preferences -> Users & Groups
4. Confirm that the user you are trying to access is not in the greyed out list of users.
5. Create a new user with the user name (short name) identical the name of the user's folder you are trying to restore.
6. It will say "a folder with that user already exists, do you want to use the existing folder?" Confirm "Use Existing Folder"
7. Let it run for a minute and you will see the dummy user's name appear in the menu bar, on the right hand side.
8. Go to System Preferences -> Sharing and change the computer name to something other than 'dummy user account's' Computer
9. Congrats, everything should be back to normal. Log out of the dummy account and into your old account, everything should be waiting for you as you left it.

How can i restore my ipod 4 8g after accidentally reset all the files?

How can i restore the Apllications for my ipod touch 4 8g? I accidentally reset all files and documents and cannot open again. Once i turned on the unit it only displays the apple logo. please help me.

- Reset the iPod
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore from backup via iTunes
- If you can turn the iPod off, then plae the iPod in recovery mode and then restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If you can't turn it off, then let the battery fully drain. After charging for an hour try the rest and restore again.
Note athat all the apps have to be in your iTunes library in order for the apps data to be restored

I am moving all my iphoto pictures to seperate folders outside of iphoto. I have found iphoto slighlty cumbersome. After I move all pictures from iphoto to a separate file how can I delete all the iphoto photos without deleting the ones in the file?

I am moving all of my iphoto pictures into seperate folders becuase iphoto is great, but a bit cumbersome when I need to transfer all the pictures to a external drive.
1) After I move all pictures, how can I delete the iphoto pictures without destroying the ones I have in files
2) how can I ensure that I have sucessfully captures all the iphoto files so when I delelte from iphoto I have not forgotten any
3) is there a way to determine what duplicate pictures I have?
Thanks!

If you Control click on the iPhoto Library, you'll see a list of folders - one named "Masters". Inside of this folder are all of your original, high-res photos. You can copy them to other folders if you like.
You can't delete iPhoto pics without deleting the ones in the iPhoto Library.
You can copy all of your Masters pics out of the Library, ensuring that you won't forget any.
I don't know of anyway to determine if there are duplicate photos - most (if not all) have a unique name assigned.
Good luck,
Clinton

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

I am a Windows Vista User. I updated my iTunes Version 10.3. Then, when I re-opened my iTunes, all files were gone! Good thing I consolidated the files and just imported the files again. But, this happens every time I close and open my iTunes. Help?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

After a backup all music files are invisible and iTunes don't see anything

Hi,
I got a very strange problem and I'm really lost.
I made a backup of my portable iTunes libray (using a 160 GB Maxtor one touch 4 mini usb) on another backup disk (750 GB Maxtor onetouch III firwire 800). I have my library on a external disk to safe disk space on my MacBook Pro disk. For the back up I use the software Personal Backu4 of Intego Software. The 160GB iTunes disk is Formatted als Mac OS Extended format.
Now all back up data that aren't music files (AAC or MP3 files) was correctly back up, but all music files was like deleted, all artist > album folders looks empty. But, cheking with the disk utility it looks that all files exist and the Used space (36.06 GB) looks correctly and the numbers of files too (some 5942 files). But all files are invisible, folders looks empty. Now is looks that all purchased and CD imported int my library didn't exist anymore: and this in BOTH disks, side by side is the same situation.
How I can come out from this situation, I really don't have any idea how to coming out fron this sad situation.
Hany help is really appreciated. Thanks in advance!
Julien - Switzerland
Message was edited by: jdaulte

OK, here's what REALLY doesn't make sense.
After manually fixing a lost file, NOTHING in the XML changes. Not one single character changes in the XML file. I diff'd the whole file before and after - no difference. So, basically, it goes out and 'finds' it and updates something that we can't see to repair the connection, meanwhile we are left to think that this XML file has the library data in it.
Mind you, the media file(s) are present and accounted for in the file system - correct name and path and everything - before and after I go Locate the file when iTunes complains about it being missing..
iTunes is so overbloated, we can't even fix stuff when we see precisely how it is broken.

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

Lost all file associations after updating to CC 2014 and uninstalling CC

Installed IN, AI, PS CC 2014. Uninstalled IN, AI, PS 2014. Lost all file associations. Win 7 and Win 8. Anyone else?

read reply #3 about the ORDER of uninstalling & installing
If you uninstall and reinstall to fix, run the cleaner after UN and before RE
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

After Vista rollback all files locked by TrueSuite

Similar Messages

Maybe you are looking for