After wakeup from pc sleep I cant start any application

I upgraded archlinux to newes kernel, pacman, software and after upgrade when I put my laptop to sleep mode(covering lid), when it wakes up, I cant start any application. Allways I have to mannualy restart pc and then it works.
I have fluxbox.
What can be the problem, how to solve? THANKS

Go into Settings>General>Restrictions and see if you have restrictions turned on for deleting apps.

Similar Messages

Cant start mac applications after installing windows 7 on my macbook pro

cant start mac applications after installing windows 7 on my macbook pro

When booting your computer press and hold the option key. When the boot manager appears select OSX. When OSx boots select and run your "mac application".

TS4268 I was accedentally deleted my facetime. then after that from now on i cant see my facetime button in my home screen and also in setting. im just see my facetime in setting noicifation center. and i tried to check at my contact i didnt see also face

I was accedentally deleted my facetime. then after that from now on i cant see my facetime button in my home screen and also in setting. im just see only my facetime in setting>noicifation center. and i tried to check at my contact i didnt see also facetime in lower part. please help me,. thank you

Hi LifeGood,
Thanks for using Apple Support Communities. In iOS, FaceTime is not a separate app and FaceTime calls can be made as described here:
iOS: Using FaceTime
http://support.apple.com/kb/ht4319
How do I make a FaceTime call?
You can make a FaceTime call in multiple ways, depending on your device:
iPhone 4 or later: You can place a FaceTime call using the following apps:
Phone: While on a phone call, you can tap the FaceTime icon to invite the other party to a FaceTime call.
Contacts: Tap the FaceTime icon to place a FaceTime call to the contact you are viewing.
iPad 2 or later, iPad mini, iPod touch (4th generation) or later, and FaceTime for Mac: You can place a FaceTime call using the following apps:
FaceTime: Place a FaceTime call using your contacts list.
Contacts: Tap the FaceTime icon to place a FaceTime call to the contact you are viewing.
Note: There is no FaceTime app on iPhone. Use the Phone app instead.
Cheers,
- Ari

HT4623 How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the prchaser?

How to stop third party apps download with out you permission from ATT partners that cant see any connections on your account due to you not being the purchaser or on account as long as someone else is paying they can not hold legal resposible there third privacy due to legal privacy laws.

Then you should read these.
http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
This was strange but has to do with how startup disk and nvram interact
http://forums.macrumors.com/showthread.php?t=1795765
I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together. Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
One thing I found last week and meant to mention: After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

I migrated a user from another mac and cant get any updates to install!

Hi
I migrated a user from another mac and cant get any updates to install, for example it says iPhoto is intalled but its not, i never copied it from the older imac, and i cant download it to this one now
any help appreciated

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

After upgrade from snow leopard to lion, where is application front row?

After upgrade from snow leopard to lion, where is application front row? i realize it when to use my remote. any one knows about this matter?

OK - Fixed it.
Turns out the cure is to use the Webcal Interface to re-create the delegations. A bit tedious, but doing this presumably forces a rewrite of the file that previously cannot be accessed. Means you need to set up the delegation again for each account - but this at least is an improvement over not being able to do anything at all.
Once fixed, delegation works just fine.
Hope this helps someone else solve the issue etc.

I'm now at Sudan. I'm from Bangladesh. After coming Sudan I can't download/install any application from apps store. It shows error code-1009. Now what to do ? can anybody help me....?

I'm now at Sudan. I'm from Bangladesh. After coming Sudan I can't download/install any application from apps store. It shows error code-1009. Now what to do ? can anybody help me....?

Are you trying to download apps from the Sudan app store? If so, you have to have a valid credit card and billing address in the country of the app store to purchase from that app store.
Some countries also have restrictions on the apps and functions allowed in their countries.

HT2534 from 2 weeks ago i cant download any application when i want to get apps ( free & not free ) itunes shows me this error : click billing info , and verify your payment information in order to make purchaeses i have already 25 $ in my account what s

from 2 weeks ago i cant download any application
when i want to get apps ( free & not free ) itunes shows me this error : click billing info , and verify your payment information in order to make purchaeses
i have already 25 $ in my account
what should i do plz

The terms of use of the stores state (this is from the US store, but other's will be similar) :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

After the trial period I bought when starting an application, but does not advance. As I can activate it?

After the trial period I bought when starting an application, but does not advance. As I can activate it?

Hi,
Do you get any error while activating Muse, or could you please provide some more details.

Cant download any application or update any

i cant download any application or update any on my ipod touch.
once i press update or buy now it goes to the screen where all the applications are and says waiting on the new app like normal then in about 20-30 secends it dissapears and nuthing happends. with the updates same thing it doesent dissapear tho it just goes back to what ever the app was before.
PLEASE PLEASE HELP I REALLY NEED HELP PLEASE

Contact itunes support

Scheduled system wakeup from a Sleep state while lid closed

I'm wanting to backup my Ti Power Book data using the .Mac Backup 3 (BU3) application at 2am each day.
On my desktop system which is a Power Mac G5 I perform a BU3 every day at around 2am. The Energy Saver is configured to wake my Power Mac from a sleep state at 2am and not go back to sleep until some 1 hr of inactivity. Shortly after 2am I have various scheduled BU3 Plans that execute. This is working flawlessly for me.
I now want to do the same thing for my Power Book - but with its lid/screen closed. I've tried the same setup as for my Power Mac and the Power Book will wakeup at 2am but very quickly returns to sleep mode because its lid is closed which stops the BU3 from executing. I do not want to leave the Power Book's lid open at night time.
Is there a way to meet my requirements ?

Hi, Barry. No, there isn't — unless you connect an external monitor, keyboard and display to the Powerbook as described in this article.

System time stuck after returning from deep sleep

Hi,
When I return from deep sleep, my system time is set to when I entered deep sleep. Only after opening Date & Time system preferences, the time is corrected.
Any help is highly appreciated.
Markus

Other basic and routine maintenance is often helpful
even if the results of preventative tasks go unseen.
The use of Disk Utility's function to 'repair disk permission'
and also the ability to start the computer into SafeBoot
mode, where it is forced to check and repair system bits,
(hold shift key on startup, wait, login; at desktop, you can
also choose to run Disk Utility per above, by using GO in
the Finder menubar, and open Utilities folder> disk utility;
when done repairing disk permissions, quit; then restart)
is one of the harmless simpler single or dual acts one can do.
There are third party utility like interface tools that allow
the user to run maintenance tasks through the GUI of
that tool and not have to force them from a Single User
mode of access; these are often freeware, such as the
well known OnyX by Titanium Software. In my Macs,
once a month or more (if I feel motivated) I run OnyX's
'automation' tab selection, and check-box all of them.
And have OnyX's preferences set to restart after its done.
Some of the other options can be helpful, when you discover
their purpose and find when they can have practical worth.
In any event, some kinds of issues can be headed off; and
a good idea is to invest in some backup strategy which
gives you a few options; although I am lazy about it now, I
have made backup full bootable clones of my computers.
This is done to an external drive which supports same.
Learning ahead of a drastic need, how to use some of
the better free-running downloadable cloneware, is good.
And the idea is you can actually do most of the minor tech
work and repairs to a system (and have boot clones) at
home; especially handy when you live 100+ miles on a
road to nowhere. As some will argue, the living planet is
on a dead-end road, it is good to get out and witness life.
Being where there are no tech support persons, I have
learned to do more than I need to; and when not messed
with, tend to enjoy learning more than I'd actually need to.
In any event, hopefully things go well with these matters...
Good luck & happy computing!

Intel 3160 in 15t-k000 cannot reconnect to networks after resume from OS sleep/standby

Quite often the Intel Wireless-AC 3160 will be unable to reconnect to a network after Windows resumes from standby/sleep (or perhaps it's Windows' deeper hibernation). The only fix (other than restarting Windows) is to disable the 3160 in the device manager and then re-enable it. Upon re-enable, it immediately reconnects. This happens sporadically, not every resume.
Attempted resoluions (besides disable/re-enable workaround):
Tried multiple networks on both 2.4 GHz and 5.2 GHz bands. Updated the Intel drivers, the issue persists.
Ran Intel PROSet/Wireless "Manual Diagnostic Tool", which passes tests until "Association Test", which fails. Even "Scan Test" passes, but it just can't associate (connect?) with a network.
Windows automatic troubleshooting tool. No resolutions, useless.
EDIT: The issue looks a lot like this one on the AC 7260. No resolutions on that forum, unfortunately.
Windows 8.1Pro 64-bit
Intel Dual Band Wireless-AC 3160 driver version 17.1.0.19
As an aside question, what network cards are usable with the 15t-k###? For example, like the list here for the 15t-j###. Is there a simultaneous dual band card that can be used instead of the 3160? Thanks!

Hi @chappjc ,
Thank you for your inquiry, I am happy to try and help!
I understand that you are unable to connect to the network when resuming from sleep or hibernation in Windows 8 Pro.
If is possible that you card is not set to connect when waking from sleep mode.
Here are links to documents that I believe will help.
Troubleshooting wireless network and Internet (Windows 8)
From windows.microsoft.com:
How do I fix network adapter problems?
Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update
Windows ADK Overview
On your side note, here is a link to the HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC Maintenance and Service Guide. Page 19 item 5 is a list of recommended replacement cards.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Cant install any application

hai all supporters!
the applications which i've downloaded frm itunes - now days cant install new application - after download that application is seeing from the application tab - and when i select newly downloaded application and when click on "SYCN" button my phone displayes sycing in progress - but after it finished the application is not seeing in phone -
plz any one tell how to solve this

*any helpers here!*
*yes previously all the apps which downloaded from Itunes are installing .but now its not installed to phone - Its Very sad because we're spending lots of money to buy the application and after it download can't install - any mods - PLZ PLZ REPLY - its a waste of our money*

Office 2007 Configuration wizard runs every time I start any Application (word, excel, etc)

Hi!
I've installed Office 2007 Enterprise on my Vista x64 system, but when I'm
starting any of the Office apps, Office runs a setup/configuration prog
(Office is collecting/gathering setup information or something like that).
My event log has produced
numerous warnings, on of the more significant is :
Detection of product '{90120000-0030-0000-0000-0000000FF1CE}', feature
'ProductFiles', component '{6252B847-BADA-43D4-9252-E39767FA40A1}'
failed. The resource 'HKEY_CLASSES_ROOT\.pip\' does not exist.
I tried to access the HCR\.pip\ key in Regedit and receive the
following message:
"Error Opening Key
..pip can not be opened.
An error is preventing this key from being opened.
Details: Access is denied."
I have tried the Windows Installer Clean up utility to remove all
traces of Office, cleaned the registry, reinstalled Office 2007
4 times and still have the install/configuring messages popping up
upon loading the Office programs..
ANY information would be appreciated !!!
Thanx a lot @lby

MAZENS's WAY SOLVED IT
Thanks Mazen, nice move, it has worked out,
[The rest is for 'still-learners' like me, please follow the following :)]
Start Menu->Control Panel->AdministrativeTools->EventViewer (Hurray, we have the so called found event viewer)
Then hit 'Application', which brings
Type , Date, time, source bla bla window in which the events are listed.
I started reading them one by one. Once you hit a line (information), 'event properties ' window opens. You can see that there are arrow buttons to scroll down and up among the events. And there is the 'description' part in the same window. While scrolling thru all messages (information lines), I came across the follwing messages in the 'description' section:
The description for Event ID ( 0 ) in Source ( ServiceLayer ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service started.
Another event's description was:
The description for Event ID ( 0 ) in Source ( gupdate1c99657ceb0c142 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service stopped.
As you may have recognized message mentions about 'Event ID ( 0 )'.
So I followed Mazen's directions and replicated ID_00030.DPC and renamed the replica as ID_00000.DPC
Now it is working without any configuration pop up. By the way, before creating ID_00000.DPC, I had already tried ID_00011.DPC and ID_00051.DPC. Now I have four .dpc files (0,30,11,51) in C:\Program Files\Microsoft Office\Office12
As Office2007 application is starting fast now, I don't bother about them (i guess/hope it is ok).
Best wishes,

After wakeup from pc sleep I cant start any application

Similar Messages

Maybe you are looking for