After win 10 upgrade my probook 450 g1 graphics drivers problem

After i upgrade my os to win 10 the graphic driver has a problem my laptop is probook 450 g1 please support the new windows quickly

As a long time Windows 10 tester, I have found by and large that the Windows 8.1 drivers will work, albeit sometimes in a limited fashion. So if you're running the Intel 4600 Graphics chip, use the Windows 8.1 drivers, they will work.

Similar Messages

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

Satellite L855-124 can't change display brightness after Win 8 upgrade

Hello everyone,
I have a problem with my Toshiba Satellite L855-124 PSKACE laptop.
After upgrading to Windows 8, I can't change the brightness backlight of the laptop screen.
There seems to be an error in the graphical driver.
When I install the Windows 7 graphical AMD driver under compatibility, it works again but bugs out on other areas.
Anyone have any ideas?
Even after using the upgrade assistant provided by Toshiba it does nothing.
Also the drivers for my laptop are poorly updated. Dating back to 2012.
I have also called tech support, they told me that a driver team will be fixing the issue.
That was 2 months ago.
Is there anyone from Toshiba that can help me with this please?
Thank you.

The document provides info about the notebook models:
Satellite L870, Satellite L875, Satellite C870, Satellite C875, Satellite Pro C870, Satellite Pro L870, Satellite C850, Satellite C855, Satellite L850, Satellite Pro L850, Satellite Pro C850
PSKBLE, PSC8EE, PSC8FE, PSKBME, PSKCCE, PSKCEE, PSKDLE, PSKDME, PSKDNE, PSKCDE, PSKCCR, PSC8ER, PSKCCF, PSKCCV, PSKCEV, PSKBLR, PSKDLV, PSKDLR, PSKDLF, PSKG9E, PSCBBE, PSKFPE, PSCBZE, PSCBYE, PSKG8E, PSKFNE, PSCBDE, PSCBYR, PSKFNR, PSKCER, PSCBCR, PSKG8R, PSKFLE, PSCBCE, PSKG8V, PSCBYV, PSCBYF, PSKG8F
Choose the driver released for the following models

Qosmio F60 - No additional touchpad and Fn function after Win 8 upgrade

I recently installed Windows 8 on my Qosmio F60 and now I have some issues, I think it might be driver related but not sure which drivers in particular.
1. The touchpad still works for moving the pointer but swiping along the right edge doesn't scroll anymore, I have had a look on the drivers webpage but cant find which driver I need it install to make this work. Also does anyone know if there is a Windows 8 driver so that i can swipe the edge to bring up the charms and switch tabs?
2. The FN keys no longer work so i can't control the brightness or the other functions along the top row of the keyboard.
If anyone can help with either of these issues that would be great.
Thanks,
Phillip

Hi
As you can see there are no special Win 8 drivers fro the Qosmio F60 series.
Its not Win 8 supported.
However, I think you should be able to use the Win 8 upgrade drivers released for Qosmio F750.
Try it.
Recommend installing the touchpad driver (from Synaptics), the Toshiba Function Key Utility, Value Added Package and Toshiba System Driver

Touch screen issues after win 10 upgrade

Hello! I upgraded my Touchsmart 600 (http://support.hp.com/id-en/document/c02507415) to Windows 10. Everything works fine besides touch screen. It actually worked right after I installed new drivers for Graphic card, it worked really fine. After Shutdown or Restart, so after rebooting it stopped working. Now only works on login screen, strange. Whwn I log in, stops. I tried reinstalling Graphic drivers, just to see what happens, and my touch screen worked again. When I restart, again only on login screen. Awkward. Any help would be appreciated. Thanks in advance, Hrvoje.

Similar issues here with a Pavilion TS11. Touch screen works intermittently. Works fine immediately after booting, then randomly quits working. I started to think it was just a coincidence and a wire was loose or something was malfunction in the screen itself. It does randomly start to work again though. I hate it because so far I really like Win10.

After win 10 upgrade what to do with win 7 free upgrade disk

Is the windows 7 free upgrade that i got when i bought my l305-s5946 somehow linked with the windows 10 upgrade, or can i use it to upgrade a different toshiba laptop from vista to win 7 with out any problem.any info on this would be helpful. I bought a fixerupper laptop (same model), bought the vista recovery disks and was told that the free win 7 upgrade for that model was no longer available, so, i would realy like to upgrade it to win 7 if possible, with the upgrade that i already have that is not being used now.thanks

Try cleaning the lens and see if that will restore functionality to the DVD drive. Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth) around a business card and insert it gently inside the slot.
If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
Ciao.

Portege Z930: Loss of Fn keys after Win 8 upgrade - cannot turn WiFi on/off

After many months biding my time I have just embarked upon upgrading my Portege Z930-11G to Windows 8 Pro.
Largely this has gone to plan with the exception that after running the Toshiba Upgrade Assistant I've lost the Fn key display and about half the keys no longer seem to function at all.
The only key I ever used routinely is the Fn+F8 option to turn WiFi on/off.
So now I cannot enable the WiFi on the machine.
There must, surely, be a mean to do this but I can't find it. Does anyone have a suggestion? I'm OK for now as I have a wired LAN in the house but once I get out on the road I'm going to struggle without WiFi.
Before running the upgrade assistant the Fn key brought the key display up across the top of the screen and I surely wish I'd turned WiFi on at that point.
The Fn key utility offers very little control of the Fn keys. It does not offer the ability to do anything other than disable five on screen notifications for keyboard backlight, power plan, touch pad, cursor overlay and numeric overlay.
All help gratefully received.
Andrew

> So now I cannot enable the WiFi on the machine.
First of all you can enable and disable the WiFi using function key but you can also enable the WLan in Windows 8 settings
Win key + C -> Settings -> Change PC settings -> Wireless
Now you can use the wireless devices slider to enable or disable the WLan.
But to get the FN key working you have to install the +Toshiba Function Key Utility+ for Win 8 and +Toshiba System Driver+ for Win 8

Can't access OS X shared folder after Win 8 upgrade

I have a Mountain Lion Mac and a Win 7 PC with folder sharing over wifi for many months. After the Win 8 upgarde last night, the Mac still can read and write the shared PC folder, but not vice versa. PC sees Mac as a network drive, but it keeps saying the user name/password is incorrect, which of course is not true. I tried deleting, changing and recreating account names/passwords on Mac, refreshing WINS setting, using IP address instead of name, remote sharing, enabling discovery, firewalls, etc., but nothing worked. Maybe a Win8 bug since Win7 worked fine? Or a security feature on OS X? Also, PC adds a domain name (the machine's name) in front of the account name (e.g. lance0406-pc\lance) which may give Mac the wrong account? I can't get rid of the domain even after changing my sign-in to the local computer. It's a home computer, so there is no domain. Any insight is helpful. Thanks.

Same situation here... but I think it's not an Apple Issue.
I found a problem really similar to this in 2008 with the DNS-313 and the old Leopard O.S.
Have a look at this thread (in this thread I am "tourniquet"):
http://forums.macrumors.com/archive/index.php/t-554245.html
The problem was really similar because with the finder you couldn't navigate but with the terminal (or with muCommander) you had no problem!
As you can see, the problem was that the Finder couldn't manage the "Unix Extensions" option, set to ON in the Samba Server on the DNS-313 (we had the firmware 1.0 then).
D-Link solved the issue later, with a firmware upgrade that disabled this "Unix Extensions" option so... couldn't it be possible that now Lion require this option to be set to ON again?!?!
I will try this evening (10 hours from now, I'm Italian) enabling the unix extensions on the Samba Server of the DNS-313 (gaining an access to the 313 by telnet) and I will let you know if I sort this issue out.
Greetings
Dave
P.S. My "english" *****... sorry...

Qosmio X875 - ECO mode doesn't work right after Win 8 upgrade

I used Toshiba upgrade assistant to upgrade to Win 8. It did a good job uninstalling the non-compatible software before upgrading, and installing the new Toshiba and driver versions after the upgraded was completed.
I activated ECO mode and to my surprise, it isn't working as before (in Win 7):
*Now, it just works with brightness in level 1*... very dim. Before, ECO mode allowed me to go up to level 4 and still was considered to be in Eco mode..
If I increase brightness, the message "eco Mode is turned Off" immediately pops up.
How to contact Toshiba to let them know of this problem and other problem I found with the new BIOS?
BTW, I own a Qosmio X875
Message was edited by: qosmitto

> How to contact Toshiba to let them know of this problem and other problem I found with the new BIOS?
Contact your Toshiba authorized service provider in your country.
Read this:
+What is the TOSHIBA eco Utility?+
http://aps2.toshiba-tro.de/kb0/FAQ2503AT0000R01.htm
> It changes the display brightness to Level-4, changes the dimmed display brightness to Level-1 (*4),
_The *4 means Only on models with Windows7 installed_
I assume the previous configuration was related to Win 7 only.
The Win 8 was made for mobile (tablet usage) too the battery power consumption is very important factory using Win 8. The battery consumption needs to be hold on lowest level as possible.
So I assume now using Win 8 and ECO mode means to save max power and to extended battery working time to a max level.

Officejet 4500 after Win 7 Upgrade - No Scanner -No HP Solution Centre

1) Upgraded from Win Vista to Win7. HP Solution Centre didn't work.
2) Uninstalled all HP software using Control Panel\Programs and Features.
3) Attempted to reinstall with my disc - failed several times. Disc just spins in Drive.
4)Downloaded HP Scrubber OJ4500vG510a-f_Scrubber_13.exe. Ran it twice. No idea what happened.
5)Went online and downloaded hppiw.exe Install Utility. Turned on printer and connected with USB cable.
I have attempted this twice now. No success. After it finds my printer and I select Next, it goes and downloads the same software over and over again. Infinite loop.
6) Restored OS. Printer works but no scanning and HP Solution Centre results in Parsing error.
Nothing that I have tried works. Very frustrated here.

Hi aquaboy,
I understand that after upgrading to Windows 7 you could not get the HP Solution Center to work. I will try my best to help you resolve this issue. This document for The Printer Is Not Listed in HP Solution Center After Upgrading to Windows 7 are steps for resolving this issue.
If you are still having a problem finding the download, tell me the Model Number of your printer I will send you a link for the Full Feature download.
I hope this information helps, let me know.
Thank you,
I worked on behalf of HP.

C560 - Too much heat at monitor after Win 10 upgrade

Hi Friends, Before upgrading to win 10, I made clean format to win 8.1 and updated it full. After upgrading to win 10, right side of the monitor (up to down) there is too much heat and is untouchable cause of heat. Also, the hardisc and display card is making too much noise after upgrade to win 10. Is it normal? And what can I do?

Hi ebordon,
Thank you for considering Sony Community!
I am sorry to hear your issue but let's try to isolate this. Hopefully will be able to boot your unit to Windows. Since this is a U.S. model, these steps are applicable to your unit.
Remove all peripherals -> look for a battery off button or pinhole on the bottom of the laptop -> push the button for 5 seconds.
Reset BIOS.
Safe Mode.
If you're planning to roll back to the previous operating system, please visit this page: How to go back to a previous version of Windows after Windows 10 has been installed.
For other concern and for further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Hope these help.
Regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

CD/DVD doesn't work after Win 8 upgrade on Satellite L750

Hello,
after upgrading my Satellite L750 to Windows 8 I can't access my CD/DVD-unit anymore (error-code 19 invalid invalid or not complete registry entry). Same error occurs when I connect my USB BD-writer.
Who can help?
Frank

Hi guys
Found a solution here:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
*Uninstall the Toshiba programs:*
TOSHIBA Recovery Media Creator
TOSHIBA Disc Creator
Then restart your PC using the Power-->Restart option in Windows 8.
Your CD/DVD should be accessible now.
For help with uninstalling these programs follow the instructions below
*To Uninstall a program or application:*
1. At the START screen type Control Panel
2. Select Programs --> Uninstall a program
3. Find the two programs listed above and uninstall these applications
4. After the application programs are uninstalled restart your computer using the Power-->Restart option in Windows 8
5. When the computer power back on the CD/DVD drive should be available
If the CD/DVD drive still does not appear follow the instructions below to uninstall a device driver
*To uninstall a device driver:*
1. At the START screen type Device Manager
2. Select Device Manager > DVD/CD-ROM drives > right click on the device displayed > select Uninstall.
3. After the driver uninstalls, power down you computer using the restart method. The driver will install automatically when the computer restarts.
4. The CD/DVD drive should now be shown.

Satellite A205 - SD Card reader stopped working after Win 7 upgrade

Satellite A205-SP5818
I recently upgraded to Windows 7, and, among other things, the SD Card reader stopped working. I already downloaded and installed the driver offered in this site: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2190493& rpn=PSAE3U&modelFilter=&selCategory=3&selFamily=10 73768663 (it's the next-to-last driver shown) but it went from not working all together to making funny noices when I insert the SD card... and then not working.
Any ideas of other drivers that might work, or any kind of other solution?
Thanks.

Hi
Try to remove eh SD card controller from the device list.
Then reboot the unit.
After that windows will ask you for an driver.
You can download this driver:
[SD Driver, Flash Memory v2.0.0.7|http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_cardreader_ti_25844A.exe]
You should unzip this package and has to point the driver files in this folder
This should helps to get the SD card reader working again

Lenovo Yoga Tab 2 1051L. Bluetooth keyboard not working after WIN 10 upgrade

Hello, Today upgradet my Lenovo Yoga Tab 2 1051L from win 8.1 to win 10 and bluetooth keyboard is not detecting any more. 1. Does any one already upgradet to win 10 on LeonovoYoga Tab 2 to win 10 ?2. Is anyone having similar issue ?3. Any suggestion at this point ? Thank you in advance!

I have yet to upgrade on my 1051.
Looks like Lenovo uploaded new drivers for windows 10.
http://support.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-1051
Have you update to these drivers?
Looks like there is a bios update as well.
Side note:
I have upgraded to 10 on another tablet(stream 7)
Once everything was updated and I gave it time to settle in I had no issues.

Audio and video issue after Win 10 Upgrade - Split X2 laptop 64-bit

Any solution to the Audio and Video issues on Split X2 13" laptop after Windows 10 FREE Upgrade?? - Intel Core i5 processor- 4GB memory I'm sure others are have the same Audio/video problems: - there is Sound and video playback but the sound and video is repeated slowly forward....impossible to understand the audio. The video is clear but also being played in repeated frames as it moves slowly forward!- sounds coming out of the speakers ok - everything was working great on Windows 8.1 (before upgrading to Windows 10). there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until a real fix is provided?? Regards - VK

I have downloaded and installed the HP recommended IDT Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is: STWRT64.sys 6.10.6498.0 The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos. My Split 13 X2 product id is: E2S66AV BIOS F.27

After win 10 upgrade my probook 450 g1 graphics drivers problem

Similar Messages

Maybe you are looking for