After Window Crash & Restore Articles in Firefox print in small 4pt type reather than the normal 10pt-11pt type

With Internet Explorer web articles print in normal size type 10pt - 11pt. With Firefox web articles print in small 2pt-4pt type. This started after a Windows crash & restore.

The Packaged are already there on the server as the RHEL software DVD is copied on the server.
Yes it was working before the crash, And Even after the Crash i.e
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
and was in the process of installing the sabayon rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps from RHEL software Packages directory.
and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   After that I could Not install any rpm from rpm or yum command.
   I 've Downloaded the new sabyon* and Other rpms from the net and tried to install them with rpm or yum command but
    got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   with yum am getting this error
   error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
The Reinstallation of OS is not AN Option for me rightnow.
   Could you tell something which i could try & may be that works.
Thanks
MZ

Similar Messages

Anything printed with firefox prints too small

anything printed with firefox prints too small. If I print and email it prints in the center top of the page and is just larger than a credit card. if I adjust the scale to 100% the it prints what could fit on one page onto 4 pages and prints a small portion in the center top of the page and is just larger than a credit card.

Ok i think i fixed this issues.
i went to about:config print.print_margin_bottom (and also left, right and top) and right clicked reset (it took out the previous 0.5 value). now the pages look normal on print preview without the large margin

After windows crashes with firefox open profile always needs to be recreated

Anytime windows crashes or my computer unexpectedly restarts and Firefox is open, the "restore session" screen comes up, then no matter what (if anything) is clicked, Firefox promptly locks up.
I have to create a new profile and copy over the profile folder contents every single time. It is very annoying and frustrating.
I have tried deleting the entire profile folder after the crash, no change.
I have uninstalled and reinstall Firefox (with and without thunderbird), no change.
I have even go through the registry and manually deleted any mozilla and firefox key.
It has been going on in releases 4.x, 6, and now 7.0.1

Why not back up your profile (back to the Firefox parent directory), so that you can put it back easily? That way, you save the profiles.ini file as well as the profile.
http://kb.mozillazine.org/Protect_the_profiles_contents

Acrobat print window crashed when try to a print the PDF opened through browser

Hi,
I have Acobat pro and reader installed on my machine.
I have set the properties - Open pdf in browser. So, all the PDFs are opening in browser uses Acrobat not the reader.
And this is way I want. It was woking fine on Windows XP.
After Windows 7 upgrade, Print option on acrobat (pdf opened in browser), makes browser crashed. Printing window (pop up) appears but looks it is hanged. No OK, cancel buttons appears.
If I uncheck the acrobat properties - Open pdf in browser, then it works fine. But my other applications which need acrobat in the browser start crashing.
Is there any property/setting which is restricting print dialog box/ making browser not to respond?
Please advise.

Yes, I updated Acrobat through update option last week.
Acrobat 9.5.2
Windows 7 64 bit OS
Adobe Reader XI
Browser IE 10
In print window couple of fields which get drop down automatically have blank values.
Please let me know if you need more information.
Arcobat shows proper print window (pop up) if I uncheck the checkbox - Open pdf in browser. And then I open pdf in acrobat and try to print it.

Grub system boot messed up after windows crash

I have a dualboot system with Win XP and Arch. Yesterday Windows crashed while i was listening to music. Since then, when i boot my computer Grub throws an error message (i think it's error 17) and doesn't start the bootmanager. But if i boot from a normal Ubuntu-Live-CD an choose "boot from first harddisk" i get my grub manager and i am able to boot normally.
I tried to fix this by manually reconfigure grub like this:
1. Pop in the Live CD, boot from it until you reach the desktop.
2. Open a terminal window or switch to a tty.
3. Type "grub"
4. Type "root (hd0,6)", or whatever your harddisk + boot partition numbers are (my /boot is at /dev/sda7, which translates to hd0,6 for grub).
5. Type "setup (hd0)", ot whatever your harddisk nr is.
6. Quit grub by typing "quit".
7. Reboot.
(taken from http://ubuntuforums.org/showpost.php?p= … stcount=2)
It seems that my hdX is different to my sdX labels. sda is my linux harddisk, and sdc is my windows drive. But if i type root (hd0,0) i get "Filesystem type unknown, partition type 0x7", which means that this is an NTFS drive. So i tried root (hd2,0) (in my menu.lst, booting arch is also defined with hd2,0) and then i get "Error 21: Selected disk does not exist".
Now two questions:
1) Why is the labeling different? Why isn't sda1 = hd0 and so on?
2) How to restore my boot process? (this is slightly more important )

Alp wrote:
I think you both understood me wrong.
First, i don't need to alter the menu.lst, because grub doesn't show the boot choose menu at all. It just prints error 17 without any chance of doing something.
Second, i know the naming procedure. But obviously in my case hd0 and hd2 are switched, so that sda = (hd2) and sdc = (hd0). I don't know why.
well - you referred to 'sda1' as 'hd0' in your first post ...
as for the remapping of drives, there's always:
map (hd0) (hd2)
map (hd2) (hd0)

Adobe Illustrator Not Working After Windows 7 Restore

My Windows crashed recently and it restored to an earlier version. The earlier version did not have the Creative Cloud registered. So while I have all the files under the Program Files, they do not appear anywhere else. I thought of uninstalling but they are not appearing in the uninstall list. I tried to delete the folders (Adobe) but it didnt delete them all the way.
So at the moment, I can't uninstall them, delete the folders or re-install the programs. I dont know what to do? Can someone help?

Run the Creative Cloud Cleaner Tool, reinstall.
Mylenium

Reauthorizing my computer after windows crashed

Hi,
My Windows crashed 2 days ago and I had to format my C drive and reinstall everything again. Now with the new installation, iTunes is telling me that I have "one more computer" authorized beside the one I am using now.
Is there a way to remove my old computer from the authorized computers list? And is it possible to view that list at all?
Thanks

Another Microsoft "tax" and the answer is no.
This isn't a concern until you reach 5 authorized computers.
Check this link under "To deauthorize all computers associated with your account."
http://support.apple.com/kb/HT1420

Printing a component that is larger than the paper size

Hi,
I am trying to print a component that may be larger than the size of the paper being used. Is there some way to get it to split between pages - ie, if it's larger than the page, it is printed over two or more pages?
The component in question is a JTextArea. Would it be better to get the text from it and use the graphics drawString rather than the component's paint method?
The relevant part of the code is below.
Thanks,
Helen
     //cast the Graphics object to a Graphics2D object
     Graphics2D g2 = (Graphics2D) g;
     //set the origin to be (0,0)
     g2.translate(format.getImageableX(), format.getImageableY());
     //if double buffering is enabled, disable it before printing
     boolean b = testForDoubleBuffering(c);
     if (b == true){
     disableDoubleBuffering(c);
     //tell the Component to draw itself to the printer
     comp.paint(g2);
     //if double buffering was enabled, reenable it once printing has happened
     if (b == true){
     enableDoubleBuffering(c);
     //return this constant to tell the PrinterJob that the page has been printed
     return Printable.PAGE_EXISTS;

Hi,
I am trying to print a component that may be larger
than the size of the paper being used. Is there some
way to get it to split between pages - ie, if it's
larger than the page, it is printed over two or more
pages?
The component in question is a JTextArea. Would it be
better to get the text from it and use the graphics
drawString rather than the component's paint method?
The relevant part of the code is below.
Thanks,
Helen
     //cast the Graphics object to a Graphics2D object
     Graphics2D g2 = (Graphics2D) g;
     //set the origin to be (0,0)
g2.translate(format.getImageableX(),
format.getImageableY());
//if double buffering is enabled, disable it before
printing
     boolean b = testForDoubleBuffering(c);
     if (b == true){
     disableDoubleBuffering(c);
     //tell the Component to draw itself to the printer
     comp.paint(g2);
//if double buffering was enabled, reenable it once
printing has happened
     if (b == true){
     enableDoubleBuffering(c);
//return this constant to tell the PrinterJob that
the page has been printed
     return Printable.PAGE_EXISTS;I should add that this is part of a class that implements Printable. However, it is being called by a Book class with the Book's append() method. It is the Book class that is being printed by the PrintJob:
     Book book = new Book();
     book.append(new PrintableClass(c), format);
     //set the pageable class to be the book, with the user-selected format
     job.setPageable(book);
     //if the user clicks the print button, start the printing process, otherwise cancel the print
     if(job.printDialog()){
     try {
          job.print();
     } catch(PrinterException pe) {
          System.out.println("Error printing: " + pe);
Thanks,
Helen

Save Firefox setting after windows crashes

My C:\ drive is the System Recovery partition. My D:\drive is my windows partition... I messed up on a HDD cloning... Windows will not start up and I believe a fresh install is in order, however I do not recall the last time I backup-ed up my saved passwords/bookmarks. If I connect my HDD to a different computer, is there a file from firefox I can copy over to have all my saved passwords and bookmarks? Or do you need to back it up while its running?

This article might also be useful: [[Recovering important data from an old profile]].

How can I deactivate Creative Cloud after windows crashed?

Good morning everyone,
Ive following issue that my Second PC crashed and Windows restored itself. Unfortunately it deleted half of the creative cloud programms. My issue is now that i cant reeinstall Photoshop and Aftereffects because it always says that all license are already in use. So is there any way to delet ore log myself off a license without the program beeing installed anymore.
I would be realy thankfull for any help.
Cheers
Forster F

Hi Forster,
Welcome to Adobe Forum,
The CC has been activated twice, so please perform the steps as mentioned earlier, when you will launch & try to sign in after install, it will ask you to deactivate from previous machine.
There will be an option to deactivate it from there also, if your previous machine are un accessible then you can choose the option to deactivate from here & henceforth it will allow to sign in & activate.
Please let us know if it worked.
Regards,
Rajshree

1.Backup to External drive 2. CoverArt lost after Windows system restore

I recently spent many hours searching for and applying cover art for my music which was mostly ripped before cover art was readily available.
Because of this investment, I want to be sure my library is fully backed up. I want to use space on an external drive, rather than DVD's.
I noticed as I added art, iTunes started acting sluggish. I thought it might be because of the new version or a recent Windows Vista update. So I decided to run system restore. I was appalled to discover that restore wiped out the art I had added. So I reversed the restore and the cover art returned. It became clear to me that the art must be stored in some other way than in the actual music file. I've searched the forum and found others who had problems with system restore, but no explanation of exactly what I should do if I want to proceed with a system restore. I use system restore several times a year and I have never lost anything in iTunes before I started adding cover art. I also never had a problem with sluggishness til I added a bunch of cover art.
My library is large at 3000 items.
Is there a way to compact or optimize the database to improve responsiveness?
Is there a way to backup to an external drive? Is it just a file copy and export library file?
If I export the library as an xml file before I do a system restore, can I then replace it after the restore and protect my cover art.

To be completely sure what you're doing please take a look at your iTunes Folder and see what Vista stores inside it. To find it, go to Start>Computer>Hard Disk C>Users>Your Name>Music>iTunes>.......
Please note there is an artwork folder PLUS a music folder!
My guess is that your system restore point pre-dated the time you added artwork to your iTunes files. (Celebrate that system restore still works for you--I have not been able to successfully restore for over a year now--Norton Internet Security causes system restore failures for many Windows users! I've tried to do this using Windows XP and Vista--and I can never successfully restore anymore.)
To fully backup your library, just copy the entire iTunes folder to another source--second hard drive, USB drive, or burn it to a CD or DVD, etc.
If you're experiencing "sluggishness" it may be due to the amount of RAM on your system. iTunes needs a great deal of RAM to run smoothly. You can choose to: increase the RAM on your system, OR, turn off cover flow/album view and see if things run more smoothly.

Can't sync IPhone after PC crash/restore

Hi, hopefully someone can help me.
My PC crashed. I had to take it back to original settings, completely restoring the hard drive. Once complete, I reinstalled ITunes 11 and restored my data from external backup.
Now I can't sync our IPhones to ITunes because I get an error that my IPhone is associated with another ITunes library. I'm not sure how to go about solving this issues.
I had contemplated uninstalling ITunes and the library and starting fresh because some of the music stored on the external backup was duplicated when I reinstalled it as some was stored in the ITunes cloud.
Any ideas on how to sync the IPhones would be appreciated.

Do you mean simply trash the iTunes app?
If so, then how do I reinstall it, that is, where do I find the files to do so? A spotlight search of my iMac didn't show any file with which to do so, and a search on Apple Support discuss Windows systems only.
Thanks for your help!

After HD crash, restoring to new HD. Library files missing or corrupt. How can I get iTunes 10 to see my music

The hard drive on my fairly new HP Pavilion desktop died hard on boot-up. HP replaced the drive the next day. Used the Recovery Disks and got the unit up and running. I have been using Memeo Premium Backup and never did get any error messages during backup. When I went to restore the data, much of it is missing or corrupt. In the Restore data on the backup drive, I can see many folders but only a few have data. I opened a ticket with Memeo and after they made a few useless comments, they closed the ticket.
Fortunately, most of my iTunes data (folders and files) were restored in-tact. The exceptions were the library files, which are missing. The library files in the Previous Itunes Library folder were corrupted. I installed iTunes 10, but there are no songs, podcasts,etc, in it. I have tried every article in the knowledgebase and tried to fix the ITL and XML files, but it is hopeless. Also, when iTunes is running, at the top it shows .iTunes Preferences.plist. So, I have a disaster and about 10 gb of music going nowhere. Any ideas? I would really appreciate any help I can get.
Brad

They are all mostly the same size at around 6MB but there are a couple that are very large 55MB (including the 30 tmp file I mentioned above. There is also one around 7KB). I tried renaming the most recent (as of 8:30PM last night) tmp file as iTunes Library.itl but when I launch iTunes, I get the "The file 'iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" popup.
But when I go into a directory I created to get the most recent itl file I've been saving as a backup and copy it into the iTunes directory to replace the one that I tried to make with the tmp file, and launch iTunes, my whole library loads with no problem.
However, if history repeats itself, this will work for at most a couple of days before I have to copy the saved itl file back into the iTunes directory.

Reinstalling PSE 10 after Windows crash and saving old projects

Hi!
My windows installation has crashed - no chance to get it alive again. I have an important not finished film project on 3 harddisks and diverse partitions (as it is recommended: Media, the raw captured video and so on). On C is only windows XP and the programm and its folder. The project itself and the prel file is on D with all the rest of the Data of the other programms. All Harddisks are ok.
When I reinstall Windows in the same way as it was before, and on C also PSE again. And then click on the prel file. Will it work to continue then?
Will there be any loss? Will it work as before? What should I take care of?
Are all the informations of the project where the parts of the project is stored in the prel file? Are they / some (also?) in the programm folder of PSE on C?
(As there are the 3 Harddrives and more partitions it could be that during the installation xp does not assign the drive letters and partition letters absolutely the same way it was before though....)
Shall I after having reinstalled windows and PSE copy the old programm folder to C again? (After the installation the programm in the new proper XP is registered of course and would be looking the same exept of the installation dates.)
I could save and copy the old PSE folder in programms on C with a linux live CD and put it on D before reinstalling XP and erasing all that was on C before. (The rest will not be touched, as it is on the other partitions / drives).
Thanks for the answers and help!

Re: Barbara: What my main question is, is will Adobe provide me a replacement PSE7 product/download for my computer? I understand that a code wouldn't work that way.
And to answer another question, yeah. its the same computer, and I have sucessfully reinstalled one other product via disk and code.

"Indexing is not running" after Windows 7 restore

I recently had a laptop hard drive poop out. I bought a new one and and accomplished a full restore from a fresh backup managed by Lenovo Rescue and Recovery 4.3. I was initially impressed because almost everything is 100%. Windows and Office had to be re-activated. System Restore had to have the "old C: Drive" deleted and the new one turned on. But the uber-critical Windows Search (Indexing) is broken. Most of the options on the Indexing Options panel are dithered. The event log is streaming the same three errors until I disable the service entirely. Rebuild will not work. Screen captures are available.
None of the stock "fix the index" techniques worked (I already have 2 hours into it using Google et al.). This is going to require someone with intimate knowledge of how the WINDOWS 7 indexing system works and how to "reset" it
In a maybe-related problem, I cannot do any System Updates either.
Rebuilding this system is simple too painful so I need the restore to work.
TIA.

With your 2 hours of googleing, have you found this thread or tried the things they recommend to try?
http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/223fe398-3170-4a18-bff8-1c5499...
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

After Window Crash & Restore Articles in Firefox print in small 4pt type reather than the normal 10pt-11pt type

Similar Messages

Maybe you are looking for