After windows 10 upgrade, HP Laserjet MFP M1005 not working

I upgraded my windows from win7 32bit SP1 to windows 10. But just after upgradation my printer stopped working. It is working on windows 10 32bit on my other system but not on my current system. I tried uninstalling the drivers, removing the device, updating the driver, adding the device again (as a local printer in windows) , but unfortunately I was unable to do any of the following. Please help

WIndows 10 uploaded, and the Printer HP LaserJet M1005 MPF is being frustrating.  It tries to print the same page multiple times but does not print at all.   It is continually in Paused mode.  We have uninstalled and reinstalled.  No success.   How do I get it from Paused mode.  I tried to open the manuel for the programme but no success.   All I get is the front page.Then I get a rather unhelpful request to do a survey on how helpful the site has been.   If anyone can help me I would be grateful.  

Similar Messages

  • Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

    My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

    Hi
    The webcam is listed in device manager under the Imaging devices
    There you should see USB Video Device.
    If its not listed there, then I think that the device malfunctions or its disconnected.
    The webcam is an usb device and its connected to USB controller.
    I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
    I such case the display lid needs to be disassembled and the cables should be checked.
    In my opinion its a job for an technician.

  • Skype does not recognize my headset after Windows 10 upgrade

    Hi everyoneSkype stopped recognizing my headset after Windows 10 upgrade.  I've tried the solution deactivating the "Allow applications to take exclusive control of this device" option. No success.  The headset works on my other Windows 8.1 laptop and my Cellphone. Other applications, including Windows 10 microphone setup for speech recognition work. Here is something strange though.  When I open up Skype audio tools and tap the microphone between thumb/finger Skype detects this and shows 4/5 green bars.   Any ideas? 
    Voiceless in Vancouver

    Your upgrade haven't changed the drivers properly.
    1. Just go to Device Manager and delete the audio drivers.
    2. Then restart your pc and switch on the internet.
    3. Your drivers will be automatically installed by Windows Update.
    ** If your problem is solved then Mark this as Answer! **
    ** Please give Kudos If you want to Thank Me! **

  • No internet after windows 10 upgrade-Ralink RT3290wi-fi adapter

    I have a Ralink RT3290wi-fi adapter . There is no internet after windows 10 upgrade. What i need to do or is there a driver for this adapter for windows 10. Please suggest Thanks Samrat

    there are several posts about this on the microsoft forums  about no internet after upgrading.  here is one that migt help http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/after-upgrading-from-windows-81-to-windows-10-no/42b1852e-4faa-47a2-85ca-dc8e190c7c27 here is another  http://answers.microsoft.com/en-us/windows/forum/windows_10-networking/windows-10-network-adapter-problems/3e11b955-1e5f-43e0-8891-7fef24e693dd

  • Beats Audio Control Panel software not working after Windows 10 upgrade.

    Beats Audio Control Panel software not working after Windows 10 upgrade.  the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties  I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device?  IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

    Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at  https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver.  I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update.  After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

  • Satellite C55-A5182 - Screen flickering after windows 10 upgrade.

    Satellite C55-A5182: screen flickers after windows 10 upgrade....help!!!

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works.  Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use.  Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10.  Please follow the provided troubleshooting steps and re-post with the results.  Have a great day!

  • HT5634 i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?

    i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?

    Welcome to Apple Support Communities
    You have to format your Windows volume and install Windows 7. First, insert the Windows 7 DVD and hold the C key while your computer is starting. Then, follow the steps and, at partitioning step, choose your Windows volume (it's the last volume listed in your display), choose Advanced options, and format it. Then, install Windows.
    Finally, after installing it, install the Boot Camp support software > http://support.apple.com/kb/DL1630
    Windows 8 is only compatible with some new computers. See > http://support.apple.com/kb/HT5634

  • HP Laserjet P1006 is not working on Windows 7 (64-bit).

    I lost my original CD-Driver and I tried to download the CD-Driver on HP website but it doesn't work when I click printing.  It seems that my HP Laserjet P1006 is not working on Windows 7 (64-bit).
    Can anyone give me a link that works for installing driver for HP Laserjet P1006 for Windows 7 (64-bit)?  
    Thanks for helping!

    Hi @achieverone ,
    I can help you with finding the drivers for the Laserjet P1006.
    Just to clarify, you were able to install the printer software, but it just isn't printing correct?
    Here are the two drivers available for Windows 7 64 bit.
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver.
    HP LaserJet P1005/P1006/P1500 Printer Series Full Feature Software and Driver.
    Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
    Open and close the lid five times quickly. It should print off a page with black lines on it.
    Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • After buing keynote upgrade for lion, it did not download. What can I do?

    after buing keynote upgrade for lion, it did not download. What can I do?

    Log in to your App Store account, then go to the "Purchased" section and select the "Install" button.

  • HT2188 iPad 1 requested activation after being low on power. Activation does not work.

    Hi
    My iPad 1 requested activation after being low on power. Activation does not work so I have tried to restore it from iTunes.  this progresses but after rebooting, it gets to the activation process for a few minutes and re-boots again - in a loop now. on ios6, not 7. help please?
    I also looked at trying to do a manual install of firmware via iTunes but I do not know the version of firmware or how to find it out - so really stuck!
    Thanks

    I pulled my unit out of the dock - powered up and the display goes blank (if you look carefully you can see the bios boot screen, then black, then you can see the backlight turn off.
    I plugged in the USB monitor and boom - I could log in.
    Once Logged in I could see that windows still thinks it has some of the monitors from the dock, and the internal display is set to disable.
    So the issue is the detection / setup of monitors in/out of the dock.
    I've done about all I can do for dubugging, I hope lenovo can pick up from here. if not I'll have to call lenovo support.

  • After installing firefox 27 "save link as" is not working

    after installing firefox 27 "save link as" is not working started a few days ago use to work fine before v27 was installed. please help.

    Hello hansram, '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock

    After last update the split keyboard option is not working and side switch button option works opposite for mute and rotation lock.

    Hi
    A long story about your issue... I think the reason of this is why you have deleted some registry keys. If you delete something in the Windows registry you should really know what you do. You can damage the complete Windows system!
    So I think this is the reason why the keyboard doesnt anymore.
    In the user manual I have founded that the CD-ROM booting option is only available with optional optical disk drive.
    So for me it sounds like that your USB CD drive is not compatible to the notebook

  • My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. Apple care does not know what is the cause. Please help

    After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
    During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.

    I had the same problem and found the solution here:
    https://discussions.apple.com/thread/3189272

  • Two part question 1) what happens if you  sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? 2) does installing messages beta on os x lion 10.7.5  delete ichat?

    Two part question
    1) what happens if you  sign into messages beta on os x lion 10.7.5 after it expired? does the whole application not work or just imessage? can you stil use AIM, jabbar, google talk, or yahoo?  if you open messages beta does it immediately tell you that messages beta expired?
    2) does installing messages beta on os x lion 10.7.5  delete ichat or just transform ichat into messages beta giving the illusion that ichat is deleted?

    Hi,
    It was never completely clear whether it was just hidden or whether Apple ran a download page for iChat 6.
    As the Download for Messages Beta was separate and "Deleted" iChat it would seem it would be another download for iChat 6.
    iMessages will not function as it is only an Account type within Messages and iChat 6 does not have it.
    Therefore messages on the iPhone will not sync to the Mac. (until you get Mountain Lion and Messages in that OS X version).
    Mountain Lion and it's full version of Messages will not sync the iMessages that have happened in between the 14th December 2012  (end date of Messages beta) and the Install of Mountain Lion if you decide on that route.
    8:51 PM      Sunday; May 5, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for