After Windows 10 upgrade Mic Conexant 20671 smart audio HD not working

I upgraded to Windows 10 from Windows 7. After upgrade, the audio failed - both Recorder (Mic) as well as Player (speaker) where not working and device was not recongnized in Skype I then got to know (after some internet searching) that Lenovo has released new driver for Windows 8.1 and 10. I downloaded the same (from lenovo site) and installed them in c:\Drivers\Audio . After the installation I followed the automatic installation. However it fails telling Device is not installed. I have also tried to upgrade the software from Device manager. Here it says all softwares are upto date. However mic device driver 10.0.10240.16384 - the date stamp is of today. Under the sound, video , game controller section in the Devce Manager- the device driver for Conexant 20671 is older. This device driver software is not getting upgraded, says all software are upto date. Any pointer to resolve the mic issue is welcome!

I am having the same problem. The path below is the one specified. http://support.lenovo.com/us/en/downloads/ds100832 After downloading the driver, which displays "Windows 8.1" even though I am using windows 10, the install fails saying the device is not installed. Please advise. Thanks.

Similar Messages

Compaq pressario 6604 au conexant high definition audio is not working in windows 7.. please help me

i upgraded my hp compaq pressario v 6604 au to windows 7.but i cant install sound driver. while installing it tells 'driver installation failed, could not find the device for this driver'
i downloaded new version of sound driver named sp 40170 from hp
please help me..........

Hi,
My suggestion: install this one before install sp40170
http://drivers.softpedia.com/get/SOUND-CARD/OTHER-SOUNDCARDS/Microsoft-UAA-Bus-Driver-for-High-Defin...
Good luck,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

After an upgrade to IOS 7 volume button does not work .. ((What is the reason?

On the IOS 6 everything worked correctly, but after the update button stopped working. Sometimes after a reboot it works, but rarely, and little work

No external harddri've!
It didn't make a noise and after a clean install it is...
I am guessing its a driver issue and will need to reinstall and delete what I have currently but its so annoying!

Can't access old ver. 9, 11 & 13 clips after Windows upgrade

In Sept. 2014 I downloaded PE 13 from B&H, worked fine and was able to access old PE9 & PE11 clips. In Dec. 2014 had problems with Wind. 7 Home Ed. and had to upgrade to 8.1 (decided on Pro). Installed 8.1 Pro end of Dec. 2014 and bought PE 13 DVD from B&H to reinstall after I backed up my hard drive. Problem after install of 8/1 Pro and installing PE13 from DVD I can't access and restore old clips from 9, 11 & 13. Tried everything I can think of....any suggestions PLEASE!

Very good, I completely understand. Please understand "I am not a computer geek!"
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets). CORRECT! Please as we go forward I have the PE 13 that was downloaded from B&H and worked perfectly with my previous assets in PE 9 & 11.
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem? NO! (First info is when I set up my new PE 13 after copying all data to a 1T desk drive and loaded Windows 8.1 Pro to replace my Windows 7 Home Edition, I set up the PE 13 and used 64 bit as suggested.) NOW...When I locate my previous Project Assets on the 1T drive they show as "red blocks" with a play arrow in them where previously were thumbnails, but I can't retrieve them. As such there is nothing to add to the timeline. Last night I added to the NEW PE 13 a 22 min program I'm working on. I have all those assets, thumbnails and everything is working as wonderfully as it did in 9, 11 and downloaded 13.
Now in response to a previous question you asked:
1. When you open Premiere Elements 13 Expert workspace, go to Publish+Share/Computer/QuickTime, do you see a list of presets when you explore
the Presets" field there? NO.... I can get to /Computer but there is no QuickTime there! I did download QuickTime yesterday after your suggestion.
2. You wrote
Restarted PE13 and received the message "The selected file cannot be played becuse your system does not have the required compresser/decompresser (codec) installed.
Where are you getting the selected file---- from Premiere Elements 13 Expert workspace Project Assets to where it was imported originally from a hard drive save location?
Or other? What is the specific full name of one of these files that is giving the error message?
With everything I've been trying, I'll have to recreate this series of events to answer directly.
When you did the switch from Windows 7 Home to Windows 8.1, did you go 64 bit to 64 bit or 32 bit to 64 bit in operating system? Help me with a way to determine what the bit was on 9 & 11!
Were two separate computers involved or did you manage to change the operating all on one computer? All on one Computer
The major focus for me right now is to make sure I know what file triggers the ".....not have the required compressoer/decompressor (codec)"? And to know that
you are in the Premiere Elements 13 Editor and not the Organizer 13 workspace. Help me understand!!!! I know the difference between "Add Media", "Project Assets", "Organizer", "Editor" and "Workspace". But "Project Assets" and "Workspace" are part of "Editor", so I don't understand your question.
WolcottVideo
    Can't access old ver. 9, 11 & 13 clips after Windows upgrade
    created by A.T. Romano in Premiere Elements - View the full discussion
WolcottVideo (Mike Bruce)
Thanks for the replies.
My communications are in the threads or via Adobe Forums private message. The thread communication is preferred since then all share, and learn.
Please try to reply to the post 4 questions or use the Adobe Forums private message system to send me a private message. To do the latter, click on my Adobe ID at the top of any of my replies in your thread. That should bring up my profile. Click on the orange envelope message icon to the right of what you see in order to set up and send your email to me directly. No one but you and I see the Adobe private message communications.
Here is a basic description of where the details between us need to be confirmed...
With the old computer system, you have Premiere Elements 9, 11, and 13 projects. And, you import media into each and see thumbnails for each of your imports in the project media area of the program (in version 11 and 13, called Project Assets).
When you go to open a project in one of these programs and go to the project media area, do the source media thumbnails still show as before with image in the thumbnail? Or does the thumbnail have a display of circular arrows? If the present as before, can you drag the file from the project media area to the Timeline? If you cannot, it that the problem?
We will be watching for your reply.
ATR
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7087876#7087876 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7087876#7087876
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I've just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working

Hi everyone! I’ve just upgraded my Acer One S1001 to Windows 10 and realized that the sound is not working. When I went to the support site, I found that there are no drivers for Windows 10 yet!! Only drivers for Windows 8.1 are available. Please provide the drivers for Windows 10, otherwise I’m not able play sound from my machine. Can someone please help? Thanks.

Try to install latest Realtek 2.79 version:http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High Definition Audio Codecs

Realtek Audio is not working in Windows 8 x64 and 8.1 x64

I bought MSI x79 gd 65 mainboard with 4930K i7 and GTx780 1 week ago.
I downloaded windows 8 and latest bios, chipset and audio drivers: Audio didnt worked. Then i updated 8.1 still not worked.
I tried to dowload windows 7 its worked but not with 8.
Then i downloded 8.1 again and i started to try oldest versions like 2.72 - 2.71 they couldnt help too.
I saw in one forum i was saying "make your realtek driver, windows 7 compatible" I tried and not worked.
I saw another forum "close your nvidia audio" Not worked :(
I saw another forum " Download oldest bios" Not worked
Nearly i tried everything. I dont want to use windows 7. What can i do to fix that latest Realtek audio driver not working. Realtek manager can see my 2+1 sound system when i put the cable also when i test it sound bar moving but no sound. Please help me. I hope i can find solution in there.

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

After upgrade to snow leopard my printer does not work. shows that is idle but get a error message that printer cannot be found

after I upgraded to snow leopard my printer does not print. I get an error message that says printer cannot be found. my printer status says my printer is idle, but is green.

You forgot to mention what printer you have, but you may need a new driver:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searc

Good evening,
after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and not by being obliged to open my hard drive.
Would you please tell me what I should do. Thank you.
Best regards,
Robert

Huh?
As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
Do you have two version of iPhoto on your Machine?
And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
So, whatever set up you have is confusing.

HD Audio is not working in bootcamp windows in mac mini 2012

HD Audio is not working in bootcamp windows in mac mini 2012

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

HT4623 Hi, I am suck on the Terms and Conditions screen after the upgrade and have agreed, but I am not progressing further from this sceen after agreeing? What do I need to do?

Hi, I am suck on the Terms and Conditions screen after the upgrade and have agreed, but I am not progressing further from this sceen after agreeing? What do I need to do?

Have you tried resetting (Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears) and starting the set up again?

System Audio Is Not Working: Error AppleLegacyAudio/AppleTexas2Audio.cpp

Hello,
I noticed last night that my audio has stopped working, both input and output. After checking the system log, this is the message that is repeated numerous times:
*Nov 19 13:04:03 sylvesters-powerbook-g4-17 kernel[0]: ^PSound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 2703 goto Exit
Is the reason the audio is not working simply a matter of a missing file or do I need to completely reinstall the OS? I have a back up that I can quickly copy files from.
Thank you very much.

Hello,
Try deleting this file: com.apple.audio.DeviceSettings.plist
/Users/YourName/Library/Preferences. Drag that .plist file from the Preferences folder to the trash, empty the trash and reboot. See if your audio works as it should. If not... might want to do an Archive and Install:
Reinstalling Mac OS X
Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
Insert the Mac OS X Install Disc and double-click the Install Mac OS X icon.
Follow the onscreen instructions. In the panel where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).
Click Options. *If you want to save your existing files, users, and network settings, select "Archive and Install," then select "Preserve Users and Network Settings.*" If you want to erase everything on your computer and reinstall Mac OS X, select "Erase and Install." You can't recover erased data.
Click Continue.
Click Customize to select which parts of Mac OS X you'd like to install, or click Install to perform a basic installation (recommended).
If you purchased a standalone version of Mac OS X, these installation instructions are in a booklet included with Mac OS X.
If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer, including Apple, bundled third-party applications, and printer drivers, instructions are in the manual that came with your computer.
For more information, visit the Mac OS X Install and Upgrade Support website at:
Mac OS Tiger Install
Carolyn

U305-S5077: Audio is not working

Hello,
   My toshiba laptop's audio is not working. I tried downloading the driver online, rebooting the computer to its factory default setting, and looking for other solution online, but I can't seem to get the sound working. When I go to the device manager, the sound icon is not there even after downloading the driver and restarting the computer. I don't know what else to do. Please help. Thanks.
Christinne

Satellite U305-S5077
One of these drivers, Christinne? May as well try both.
   Realtek Audio Driver for Windows Vista (Version: 6.0.1.5473)
   Realtek Audio Driver for Windows Vista (Version: 6.0.1.5420 Logo)
When I go to the device manager, the sound icon is not there
On the other hand, when the device is missing from Device Manager, it normally indicates a hardware malfunction.
-Jerry

Realtek high definITION AUDIO DOES NOT WORK!!!!!!!

I got one in the United States NB200 netbook, and the sound worked one or two times only. I reinstalled the driver dozens of times and not succeeded. thought that upgrading to windows 7 will resolve my problem. but does not work!! I looked on the website of Toshiba, Microsoft and realtek and none of them I succeeded. I tired! anyone know what to do ...
WINDOWS message says I do not have driver for audio output.
nb 200
windows 7 32bit
pcie realtek controller family

This is the driver you need, but your problem might not be the driver.
http://cdgenp01.csd.toshiba.com/content/support/downloads/driver_audio_realtek_TC40065300A.exe
If that one doesn't work you might have a hardware failure. Try restoring the system back to it's factory out of box state to see if it works then or not.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

My audio does not work on my pavilion dv4. i just bought this laptop a few days ago. what's going on

my audio does not work on my pavilion dv4

This worked for me.
Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences/com.apple.dashboard.plist. Move the .plist to your desktop.
Log out/in
If it works, delete the .plist on your desktop.
If the same, return the .plist to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

My Facetime audio does not work on my MacBook

My Facetime audio does not work on my MacBook, video is fine. Volume set to max, internal mic is "on", mute is 'off'. Advise

While we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac

After Windows 10 upgrade Mic Conexant 20671 smart audio HD not working

Similar Messages

Maybe you are looking for