After Windows 7 update DRVLOAD.EXE error
Hello,
I have a problem. After an automatic update from the Microsoft site is my Windows 7 Home Premium not running anymore. At startup the following appaers: the error x: \ windows \ system32 \ drvload.exe and will not start up. I can not bring him to an old system date and the system doesn`t restart and the only solution is a reinstall.
Did this and it works well he gets back within 81 updates and the problem occurs again. For the second time and reinstall the updates a bluescreen with irq problem. Now back to old date for updates again just works. At close, he installed the updates and restart the laptop again nothing works and the fault appers again.
Now I installed him again and update SP1 manually. He starts normal up and after doing 41 updates the same happened.
I will be a rather desperate and do not know what to do. I really hope that someone can help me here.
Rayman76
Hello,
it is an Toshiba Satellite C650-15J.
I did the recovery with the standard Toshiba disk rescue. On the recovery mode(F10). The operating system is Windows 7 Home Premium 64-Bit.
I really dont know what to do. On my other laptop i have no problems.
So i hope that anyone can help me
rayman76
Similar Messages
-
HP Pavilion dv6 1334us won't start after windows update, stuck in Error Recovery
My computer is an HP Pavilion dv6 1334us with 32bit-windows 7. The computer did automatic updates and when it started up said there was another one avaliable through WIndows Updater. I installed the update and it said the computer needed to restart for the update to take effect. I choose to restart and the computer wouldn't boot back up, it boots to the 'Windows Error Recovery' screen where my options are 'Launch Startup Repair (recommended)' and 'Start Windows Normally'. When I select the repair, it says it loads windows files, then goes back to the error recovery screen. When I choose to start normally, it freezes the second it trys to start, flashes a blue screen and then returns to the Error Recovery page again.
Please follow the steps in the following document to troubleshoot and fix the boot issue that you are facing.
Overview of Troubleshooting Startup Problems (Windows 7, Vista, XP): http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Please let me know the results so that I can try helping you further. Thank you.
!-------------------Please click the white star in the blue box to give KUDOS if this answer was helpful or clarified your question or issue.
If my answer solved the issue, then please click on the Accept as solution button. Thank you-----------------------------------------------------------------!
I am an HP Employee but I am not speaking on behalf of HP. The opinions and views that I express here are my own. -
Hi,
I am new to SP 2010. I have installed Share point 2010 server (trial version) on my Windows 7 Home Premium Laptop by following the below link.
http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
Everything went fine and was able to see the new sharepoint site after completing configuration wizard. SP2010 Central Admin also worked fine.
However, after windows update, sharepoint site is not working. I was able to see the site working for more than a day before windows update. SP2010 Central Admin is still working. Executed "PSCONFIG" after
update but still no good.
I saw a warning "The Security Token Service is not available" in Central Admin and did some research to fix the issue but nothing worked.
Hotfix
I believe I have all hotfixes mentioned in the forums. Here is the list.
Windows6.1-KB976462-v2-x64
Windows6.1-KB982307-x64
Synchronization
Windows6.1-KB974405-x64
MSChart
SQLSERVER2008_ASADOMD10
381569_intl_x64_zip
Windows6.1-KB976462-v2-x64
Event Viewer
I can see following log in Event Viewer when accessing site home page.
Event ID: 8306
Task Category: Claims Authentication
Level: Error
Website response
http://localhost:32843/ - "HTTP Error 503. The service is unavailable."
http://localhost:32843/Topology/Topology.svc - Works fine
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc - Returns following error. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security) and IIS website (SharePoint Web Services
-> IIS -> Authentication).
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
I even tried to uninstall Sharepoint and re-install the same. It worked even second time until it went thro' windows update. App pools are running and Websites are up and running in IIS.
Can anyone please help me to fix this issue?
ThanksHi Henrik,
Here is the log info.
<EventID>8306</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>47</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<Execution ProcessID="8436" ThreadID="8812" />
<Channel>Application</Channel>
<Security UserID="S-1-5-20" />
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal
Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px
4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;f'.
I would like to let you know that I am getting following message when accessing the below link. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security)
and IIS website (SharePoint Web Services -> IIS -> Authentication).
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
Regards -
After iTunes update, iTunes.exe System Error - msvcr80.dll missing. Followed the support suggestion & uninstalled then re-installed iTunes 5 times & still no good so followed Apples advice & uninstalled again then went into programme files & manually deleted the files re-installed again & now getting iTunes.exe System Error - icudt49.dll missing. I give up, anyone out there help ?
I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet:http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time! The main purpose of this is to remove any trace of the old version of iTunes from your computer...
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck! -
Windows Update Error 800B0109 after Windows Update Agent 7.6.7600.320 Installed
Hi, I have this error message when running windows update, it happened after Windows Update Agent 7.6.7600.320 installed.
Any idea how to resolve this?
Thank you.Hi,
Please make sure that your antivirus application does not scan the files in the
%windir% \SoftwareDistribution directory on any computer on which Windows Update Agent is installed.
You can also temporarily turn off the antivirus application and check the result.
Or run the following commands, and press Enter after each command:
Net stop wuauserv
cd %systemroot%
Ren SoftwareDistribution SoftwareDistribution.old
Net start wuauserv
Try to install updates again.
Yolanda Zhu
TechNet Community Support
I tried the commands as well, still prompting the same error.
Thanks -
Dell Latitude E6520 fails to boot after Windows Updates
Hello,
I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
a recovery disk and run:
dism /image:D:\ /cleanup-image /revertpendingactions
This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending:
kb2982378
kb2978742
kb2977629
kb2976897
kb2973112
kb2972211
There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
2014-09-18 10:52:04:214
496 540
AU Install complete for all calls, reboot needed
2014-09-18 10:52:04:216
496 540
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:623
496 8a4
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-09-18 10:52:04:623
496 8a4
AU Triggering Offline detection (non-interactive)
2014-09-18 10:52:04:623
496 8a4
AU AU setting pending client directive to 'Reboot Pending'
2014-09-18 10:52:04:623
496 8a4
AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
2014-09-18 10:52:04:625
496 8a4
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:625
496 1668
AU #############
2014-09-18 10:52:04:625
496 1668
AU ## START ## AU: Search for updates
2014-09-18 10:52:04:625
496 1668
AU #########
2014-09-18 10:52:04:626
496 1668
AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
2014-09-18 10:52:04:626
496 166c
Agent *************
2014-09-18 10:52:04:626
496 166c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:04:626
496 166c
Agent *********
2014-09-18 10:52:04:626
496 166c
Agent * Online = No; Ignore download priority = No
2014-09-18 10:52:04:626
496 166c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-09-18 10:52:04:626
496 166c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-09-18 10:52:04:626
496 166c
Agent * Search Scope = {Machine}
2014-09-18 10:52:05:210
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:07:170
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:475
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:569
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:11:590
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:14:999
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:16:887
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:18:753
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:19:623
496 1668
Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
2014-09-18 10:52:20:673
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:573
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:773
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:464
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:651
496 1668
AU AU received handle event
2014-09-18 10:52:26:366
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:27:520
496 1668
Shutdwn user declined update at shutdown
2014-09-18 10:52:27:520
496 1668
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:27:520
496 1668
AU AU initiates service shutdown
2014-09-18 10:52:27:520
496 1668
AU ########### AU: Uninitializing Automatic Updates ###########
2014-09-18 10:52:28:206
496 166c
Agent * WARNING: Exit code = 0x8024000B
2014-09-18 10:52:28:206
496 166c
Agent *********
2014-09-18 10:52:28:206
496 166c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:28:206
496 166c
Agent *************
2014-09-18 10:52:28:206
496 166c
Agent WARNING: WU client failed Searching for update with error 0x8024000b
2014-09-18 10:52:28:253
496 1668
Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
2014-09-18 10:52:04:216-0600 1
193 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems
(KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
(KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
for Windows 7 for x64-based Systems (KB2978742)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:425
496 1668
Service *********
2014-09-18 10:52:28:425
496 1668
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-09-18 10:52:28:425
496 1668
Service *************
Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.Hi ChristianBoman,
We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
http://windows.microsoft.com/en-us/onedrive/share-file-folder
for the update error 0x8024000b, please refer to the following article.
http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
Please take the following steps:
1. Run the Windows Update Troubleshooter.
2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
3. Copy the following text, and then paste it into the Run text box:
Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
4. Click OK.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Firefox won't start after windows update
After windows Updated my computer Firefox won't start. I tried a clean reinstall two times, won't work. When I tried to start the firefox the first time after booting my computer it comes with the following message.
XML Parsing Error: undefined entity
Location: chrome://mozapps/content/extensions/update.xul
Line Number 14, Column 1:
<wizard id="updateWizard"
^
Any Help would be greatly appreciated. I like firefox and I'm using it the last 7 Years.
Thanks
DKI cheated a little bit and put the issue url in a working version of firefox:
chrome://mozapps/content/extensions/update.xul
What I got was a page that looked like this below and console:
blah blah parser:
<pre><nowiki> xml-stylesheet
xml-stylesheet
<wizard id="updateWizard" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul" title="Firefox Update" windowtype="Addons:Compatibility" branded="true" onload="gUpdateWizard.init();" onwizardfinish="gUpdateWizard.onWizardFinish();" onwizardcancel="return gUpdateWizard.onWizardCancel();" onclose="return gUpdateWizard.onWizardClose(event);" buttons="accept,cancel" pagestep="1" currentpageid="dummy" firstpage="true" lastpage="true">
<script type="application/javascript" src="chrome://mozapps/content/extensions/update.js"></script>
<stringbundleset id="updateSet">
<stringbundle id="brandStrings" src="chrome://branding/locale/brand.properties"></stringbundle>
<stringbundle id="updateStrings" src="chrome://mozapps/locale/extensions/update.properties"></stringbundle>
</stringbundleset>
<wizardpage id="dummy" pageid="dummy"></wizardpage>
<wizardpage id="offline" pageid="offline" next="versioninfo" label="Firefox is working offline" onpageadvanced="return gOfflinePage.onPageAdvanced();">
<description></description>
<checkbox id="toggleOffline" checked="true" label="Go online now." accesskey="G" oncommand="gOfflinePage.toggleOffline();"></checkbox>
</wizardpage>
<wizardpage id="versioninfo" pageid="versioninfo" next="mismatch" label="Checking Compatibility of Add-ons" onpageshow="gVersionInfoPage.onPageShow();">
<label>
Checking your add-ons for compatibility with this
</label>
<separator class="thin"></separator>
<progressmeter id="versioninfo.progress" mode="undetermined"></progressmeter>
<hbox align="center">
<image id="versioninfo.throbber" class="throbber"></image>
<label id="versioninfo.status" flex="1" crop="right"></label>
</hbox>
<separator></separator>
</wizardpage>
<wizardpage id="mismatch" pageid="mismatch" next="checking" label="Incompatible Add-ons" onpageshow="gMismatchPage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<listbox id="mismatch.incompatible" flex="1"></listbox>
<separator class="thin"></separator>
<label>
Firefox can check if there are compatible versions…
</label>
</wizardpage>
<wizardpage id="checking" pageid="checking" next="noupdates" label="Checking for Compatible Add-ons" onpageshow="gUpdatePage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<progressmeter id="checking.progress"></progressmeter>
<hbox align="center"></hbox>
</wizardpage>
<wizardpage id="noupdates" pageid="noupdates" label="No Compatible Add-ons Found" onpageshow="gNoUpdatesPage.onPageShow();">
<description></description>
<separator class="thin"></separator>
<hbox id="updateCheckErrorNotFound" class="alertBox" hidden="true" align="top"></hbox>
<separator class="thin"></separator>
<description id="noupdatesCheckEnabled" hidden="true"></description>
<vbox id="noupdatesCheckDisabled" hidden="true"></vbox>
<separator flex="1"></separator>
<label></label>
<separator class="thin"></separator>
</wizardpage>
</nowiki></pre>
I do not see much about coloum 14, but I am guessing this file is stored somewhere and its corrupt. Update.xul suggests that it is the update file. Do you still have this in your downloads folder? There are two places for update and for a clean reinstall:
[http://www.mozilla.org/en-US/firefox/new/] in a private window will give you a new install or you can choose from here: [https://www.mozilla.org/en-US/firefox/all/]
This is what the file should look like; [http://hg.mozilla.org/mozilla-central/log/7a2edc5171e6/toolkit/mozapps/extensions/content/update.xul] If you can copy and paste that file from a working browser we can see the issue, but it will just look the same as the error.
if you can replace the contents of the file locally with what it should look like it will fix the error, but who knows if there are other errors. May be best to delete the updater and save all the profile folder contents. -
C:\Windows\system32\ntvdm.exe Error
I keep getting this message when I start iTunes and when I go to sync my iTouch
C:\Windows\system32\ntvdm.exe Error. iTunes seems to be working properly. But is annoyingI googled "C:\Windows\system32\ntvdm.exe" and it seems you either have some malware on your PC, or you can try setting your processor affinity as suggested in this link.
-
Windows 8 Windows Update fails with error 80244FFF
Windows 8 Windows Update fails with error 80244FFF
Hi @SURAJITsaha ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 14-b049tu Sleekbook and issues with a Windows update.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
You might have to temporarily disable your virus protection.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Profiles being reset after windows updates?
Hi All
I'm having issues with Outlook 2013 SP1 resetting our users profiles after Windows Updates have been applied. Their profiles are being reset whilst their previous profiles are being renamed to "BACKUP of <profile name>".
Office 2013 x86 has been deployed via VL Media onto Win7 x64 machines and we are distributing the ImportPRF registry key via GPO (set to Update) in order to customise the profiles on first run. (basic email account and attaching a default PST file)
It appears that after windows updates are applied outlook is triggering the first run process again and therefore resetting the users profiles back to the standard set in our PRF.
We used this method to configure Outlook 2010 and for the years of deploying Office 2010 we never had any issues. Can anyone suggest what might be going on here or what might have changed in Office 2013?
ThanksHi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
several times after system crashes and sometimes after windows updates my pinned tabs have disappeared. How can I back up the pinned tabs and bookmarks??
Firefox stores the bookmarks and the browsing history in the places.sqlite database file..
There are 10 rotating daily JSON backups (bookmarks-####-##-##.json) in the bookmarkbackups folder within the Firefox profile folder, one for each day that Firefox is started.
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
Pinned (App) tabs and tab groups are stored in the sessionstore.js file.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
See also:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile -
Blue screen: HP Pavilion dv6 after Windows update on Aug 1.
Last year or so, I had this blue screen issue with my dv6 laptop and was solved by uninstalling KB2670838.And things have been very peaceful since then, but the blue screen re-occured recently after windows update last week.The updates were suggested by HP Support agent installed in and was for getting ready for Windows 10 installation.But my pc gets blue in every 3 min now, so I un-installed all updated job occured last week as temporal solution. Though I wish to be ready for Windows 10 installation, I need to have operable PC for my work.(This is Win7 sp1, home eddition) It would be great if anyone could assist me on this. Thank you, Piko.
I have this problem. It happens without any warning.
I don't know the reason. Please help me. -
Wont boot after windows update
M y Sateite A305 s6916 wont boot after windows updates tried to install.
Satellite A305-S6916
tried .. every option on F8
Try this. Download a repair disc from here.
Windows Vista Recovery Environment ISO X64 version (64 bit)
If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
Startup Repair: frequently asked questions
Also try a System Restore.
What are the system recovery options in Windows Vista?
-Jerry -
"LogonUI.exe-Application Error" error after Windows update at Win10
I get the LogonUI.exe error after the Windows 10 TP setup. Happening on both upgrade case, and also new install case. The Windows 10 TP was ok at the setup beginning, but this error happening after a Windows update and reboot. Now I cannot logon and cannot
go to the safe mode, seems F8 or shift-F8 has no function. I'm using a T440s NB and checked all hardware diagnostics are good.
stanley
Just a data point... I've gone through the update (install of KB3002675 and KB3001512) and everything's still working. It's not breaking for everyone.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options -
"Unable to load data" error after Windows update
Hi all,
I've been maintaining a LightSwitch desktop app for a couple of years now. The app runs on a server and several client machines access it. Sometime in the last few months, any client that has Windows Update enabled has failed to load data. Instead
it shows red crosses where the data should be and the tooltip, "Unable to load data. Please check your connection and try loading again."
Other clients that don't have updates enabled are fine. Has anyone else run into this issue? Does anyone know how to resolve it?
Thanks,
LiamHi Angie,
Thanks for your reply. I've enabled diagnostics as described. Here's what I find.
When I load my LightSwitch screen, I get the following entry highlighted red in Fiddler:
GET http://127.0.0.1:6853/callback.json?_=1377245349573
502 Fiddler - Connection Failed (text/html)
GET http://127.0.0.1:6853/callback.json?_=1377245349573 HTTP/1.1
Host: 127.0.0.1:6853
Proxy-Connection: keep-alive
Accept: application/json, text/javascript, */*; q=0.01
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.57 Safari/537.36
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-GB,en;q=0.8
HTTP/1.1 502 Fiddler - Connection Failed
Date: Fri, 23 Aug 2013 08:09:10 GMT
Content-Type: text/html; charset=UTF-8
Connection: close
Timestamp: 09:09:10.584
[Fiddler] The socket connection to 127.0.0.1 failed. <br />ErrorCode: 10061. <br />No connection could be made because the target machine actively refused it 127.0.0.1:6853
After that, I see a long list of each of the queries LightSwitch is calling for all the elements on the screen. Each one contains the following error:
HTTP/1.1 200 OK
Cache-Control: no-cache
Pragma: no-cache
Content-Length: 747
Content-Type: application/msbin1
Expires: -1
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Date: Fri, 23 Aug 2013 08:10:38 GMT
@Fault5http://schemas.microsoft.com/ws/2005/05/envelope/none@Code@Value�Sender@Reason@Textxmllang�en-GB��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@Detail@DomainServiceFaultDomainServices i)http://www.w3.org/2001/XMLSchema-instance@ ErrorCode�@ErrorMessage��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@IsDomainException�
Can you help in interpreting these?
Thanks,
Liam
Maybe you are looking for
-
LBWE TCode as Display in ECC 6
Hi All I am BW developer and had a question regarding security. We are implementing BW and want to know whether we can make LBWE transaction in ECC6 as a display. As this helps us to do configuration for Logistics, we dont want any one to make change
-
How can I save my iphoto library to the cloud?
-
hello, I have seen that a user is using too much ressources on my exchange server 2010 (used Exmon to get the user) the point is, i do not know whats going on. I see on each log file on the server that is name is coming a lot of time, but the file is
-
Missing TS_InteractiveContextAsPropertyObj Function in TS_2.0
I'm trying to rebuild a LabWindows/CVI DLL project created with the TS_1.0 API and have found that NI has changed the function name of "TS_InteractiveContextAsPropertyObj" to "TS_InteractiveContextAsPropertyObject". Why the change and when can I expe
-
How can i config WLS7 and iPlanet LDAP
How can i config WLS7 and iPlanet LDAP? failed during initialization. Exception:java.lang.SecurityException: Authenticat ion for user weblogic denied java.lang.SecurityException: Authentication for user weblogic denied at weblogic.security.service.Se