After windows update in sharepoint 2010 farm , administraion service stopped and given error when start

Hi
i have a sharepoint 2010 farm
and it has total 6 servers, and in all servers i did the latest windows update
and after update i found the sharepoint 2010 administraion service was stopped and  when i start its  given error message
Log Name:      System
Source:        Service Control Manager
Date:          7/12/2014 3:01:15 PM
Event ID:      7000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SPFAPP01.xyz.gov.local
Description:
The SharePoint 2010 Administration service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-12T12:01:15.109313700Z" />
    <EventRecordID>81462</EventRecordID>
    <Correlation />
    <Execution ProcessID="576" ThreadID="3372" />
    <Channel>System</Channel>
    <Computer>SPFAPP01.xyz.gov.local</Computer>
    <Security />
  </System>
  <EventData>
    <Data Name="param1">SharePoint 2010 Administration</Data>
    <Data Name="param2">%%1053</Data>
  </EventData>
</Event>
adil

Are you able to run the Config Wizard? Are there any helpful messages in the Application Event Log or in Applications and Services Logs -> Microsoft -> SharePoint Products -> Shared -> Operational?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

  • High CPU and Disk usage on HP Envy TS 15 j-155nf after Windows Update

    I bought this laptop about a month ago and it worked perfectly fine until the second automatic Windows Update. The booting time got very slow and the entire system started to act laggy. Task Manager showed higher CPU usage than usual and Disk usage was sometimes up to 100% with no apps opened or running in the background. I decided to perform System Recovery using HP Recovery Manager. The laptop worked fine again after that, but then the same thing happened. After the second automatic Windows Update I'm back to a slow and laggy computer. I'm performing System Recovery again, but what can I do to prevent that from happening ?

    Hi,
    There are few things you can check:
    i) Check if you have more than one anti-virus installed..Check for Trial versions.If there is any then uninstall it.
    (Sometimes it could be that you have an anti-virus and windows defender or security essentials is also installed)
    ii) Next try a Clean Boot and check if it makes a difference. If clean boot fixes the issue then it has to be one of the application on the startup which is slowing it down..
    How to perform a clean boot
    iii) Run HP Support Assitant and check if there are any pending updates..
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • SP 2010 - Getting "An unexpected error has occurred. " message when accessing Sharepoint site after windows update - Windows 7 Home Premium

    Hi,
    I am new to SP 2010. I have installed Share point 2010 server (trial version) on my Windows 7 Home Premium Laptop by following the below link.
    http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
    Everything went fine and was able to see the new sharepoint site after completing configuration wizard. SP2010 Central Admin also worked fine.
    However, after windows update, sharepoint site is not working. I was able to see the site working for more than a day before windows update. SP2010 Central Admin is still working. Executed "PSCONFIG" after
    update but still no good.
    I saw a warning "The Security Token Service is not available" in Central Admin and did some research to fix the issue but nothing worked. 
    Hotfix
    I believe I have all hotfixes mentioned in the forums. Here is the list.
    Windows6.1-KB976462-v2-x64
    Windows6.1-KB982307-x64
    Synchronization
    Windows6.1-KB974405-x64
    MSChart
    SQLSERVER2008_ASADOMD10
    381569_intl_x64_zip
    Windows6.1-KB976462-v2-x64
    Event Viewer
     I can see following log in Event Viewer when accessing site home page.
    Event ID:      8306
    Task Category: Claims Authentication
    Level:         Error
    Website response
    http://localhost:32843/ - "HTTP Error 503. The service is unavailable." 
    http://localhost:32843/Topology/Topology.svc - Works fine
    http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc - Returns following error. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security) and IIS website (SharePoint Web Services
    -> IIS -> Authentication).
    HTTP Error 500.0 - Internal Server Error
       Module "WindowsAuthenticationModule" could not be found
    I even tried to uninstall Sharepoint and re-install the same. It worked even second time until it went thro' windows update. App pools are running and Websites are up and running in IIS.
    Can anyone please help me to fix this issue? 
    Thanks

    Hi Henrik,
    Here is the log info.
      <EventID>8306</EventID> 
      <Version>14</Version> 
      <Level>2</Level> 
      <Task>47</Task> 
      <Opcode>0</Opcode> 
      <Keywords>0x4000000000000000</Keywords> 
      <Execution ProcessID="8436" ThreadID="8812" /> 
      <Channel>Application</Channel> 
      <Security UserID="S-1-5-20" /> 
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
    bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal
    Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;}
    pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px
    4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;f'.
    I would like to let you know that I am getting following message when accessing the below link.  I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security)
    and IIS website (SharePoint Web Services -> IIS -> Authentication).
    http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
    HTTP Error 500.0 - Internal Server Error
       Module "WindowsAuthenticationModule" could not be found
    Regards

  • Sharepoint 3.0 website no longer working after Windows updates installed

    We have an Intranet site that was set up in SharePoint 3.0. Over the weekend windows updates were installed, specifically KB2687442. Now my Intranet site does not work. When I try and run the SharePoint Products and Technologies Configuration Wizard it
    fails at step 9 with the following error : Failed to upgrade SharePoint Products and Technologies An exception of type System.InvalidOperationException was thrown. Additional exception information: Cannot start service SPAdmin on computer '.'. When I try and
    start the Windows SharePoint services administration service manually it fails to start. When I look in the windows event log there are errors in the application log about SQL exceptions

    Hopefully this gets moved to the right forum - it doesn't belong here.
    I've had a few customers run into this issue as well after running Windows Update.  Reboot the server (admin service should start), and then try the following command:
    psconfig -cmd upgrade -inplace b2b -wait
    Roger Cormier
    Microsoft
    Premier Field Engineer, SharePoint
    Blog: http://blogs.msdn.com/b/rcormier/
    Twitter:
    LinkedIn:
    Note: My posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Random users receive an unexpected error when trying to access SharePoint 2010 farm.

    Over the past few months we had occasions where established users trying to connect to my production SharePoint 2010 farm receive a correlation error page when trying to access the farm. I have two WFEs load balanced and the errors show up on either so it
    doesn't happen on just on or the other. Specifically today it was three users in one office  out of about 15 that were affected the rest were able to access the farm without any problems and there were no other reports from other offices. Each time the
    user can eventually get in without any outside intervention it just seems to fix itself after a few hours. Each time it happens I search the logs for the CorrelationID(s) and everytime I see the same set of errors in the ULS logs. I also go check the Windows
    Security logs to make sure they connected to the server okay. I've confirmed that the Web App's PortalSuperUserAccount and PortalSuperReaderAccount are both set correctly. Just looking to see if anyone has experienced this and figured what was happening and
    how to fix it.
    These are the log entries:
    Name=Request   (GET:http://infoshare.swic.edu:80/SitePages/Home.aspx)
    Begin Query the AD to get the user email   and display name.
    End Query the AD to get the user email   and display name.
    Leaving Monitored Scope   (GetFileAndMetaInfo). Execution Time=29.4404440877166
    Leaving Monitored Scope   (GetWebPartPageContent). Execution Time=29.6140602113035
    Site=/
    Leaving Monitored Scope   (PostResolveRequestCacheHandler). Execution Time=30.6330444222452
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    PortalSiteMapProvider was unable to fetch   current node, request URL: /SitePages/Home.aspx, message: Object reference   not set to an instance of an object., stack trace:   
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite   siteNonEle...
    ...v, Boolean allowUnsafeUpdates,   ElevatedSiteProcessor callWithElevatedSite)    
    at   Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)    
    at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite   site, Boolean useContextSite, Boolean allowContextSiteOptimization)    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_CurrentNode()
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    DelegateControl: Exception thrown while   adding control 'ASP._controltemplates_metadatanavtree_ascx': Object reference   not set to an instance of an object.
    Setting [Display] as the   FormContext.FormMode for the current page
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    PortalSiteMapProvider was unable to fetch   root node, request URL: /SitePages/Home.aspx, message: Object reference not   set to an instance of an object., stack trace:   
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite   siteNonElev, ...
    ...Boolean allowUnsafeUpdates,   ElevatedSiteProcessor callWithElevatedSite)    
    at   Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)    
    at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite   site, Boolean useContextSite, Boolean allowContextSiteOptimization)    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_TryGetRootNode()
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    PortalSiteMapProvider was unable to fetch   root node, request URL: /SitePages/Home.aspx, message: Object reference not   set to an instance of an object., stack trace:   
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite   siteNonElev, ...
    ...Boolean allowUnsafeUpdates,   ElevatedSiteProcessor callWithElevatedSite)    
    at   Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)    
    at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite   site, Boolean useContextSite, Boolean allowContextSiteOptimization)    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.get_ObjectFactory()    
    at   Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapProvider.GetRootNodeCore()
    Exception in   SearchBoxEx::CreateChildControls:System.ArgumentException: Requested value   '/sites/search/Pages/' was not found.      
    at System.Enum.Parse(Type enumType, String value, Boolean ignoreCase)    
    at   Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.GetSiteDefaultsInner(PortalWebSiteMapNode   rootWeb, SPSite site)    
    at   Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.<>c__DisplayClass2.<GetSiteDefaults>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated...
    ... secureCode)    
    at   Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.GetSiteDefaults()    
    at   Microsoft.SharePoint.Portal.WebControls.SearchBoxEx.CreateChildControls()
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    Failed to create a custom control   'PublishingSiteActionsMenuCustomizer', feature 'Publishing'   (id:22a9ef51-737b-4ff2-9346-694633fe4416) using attributes (ControlSrc='',   ControlAssembly='Microsoft.SharePoint.Publishing,
    Version=14.0.0.0,   Culture=neutral, PublicKeyToken=71e9bce111e9429c',   ControlClass='Microsoft.SharePoint.Publishing.WebControls.PublishingSiteActionsMenuCustomizer':   System.Reflection.TargetInvocationException: Exception has been thrown
    by the   target of an invocation. ---> System.NullReferenceException: Object   reference not set to an instance of an object.    
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElev...
    ...atedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite   siteNonElev, Boolean allowUnsafeUpdates, ElevatedSiteProcessor   callWithElevatedSite)    
    at   Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)    
    at   Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean   useContextSite, Boolean allowContextSiteOptimization)    
    at Microsoft.SharePoint.Publishing.WebControls.CombinedBasePermissions..ctor()    
    at Microsoft.ShareP...
    ...oint.Publishing.WebControls.ConsoleVisibleUtilities.get_CanShowSiteActionsMenuItems()    
    at   Microsoft.SharePoint.Publishing.WebControls.PublishingSiteActionsMenuCustomizer..ctor()    
    at   System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean   skipVisibilityChecks, Boolean fillCache)      
    --- End of inner exception stack trace ---    
    at System.RuntimeType.CreateInstanceImpl(Boolean   publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)    
    at System.Activator.CreateInstance(Type   type, Boolean nonPublic)    
    at   Microsoft.SharePoint.Utilities.SPUtility.CreateServerControlFromAssembly(String   sControlAssembly, String sControlClass)      
    at   Microsoft.SharePoint.SPControlElement.BuildCustomControl(TemplateControl   tctlPage, String sControlAssembly, String sControlClass, String sCon...
    ...trolSrc, XmlNode xnElementDefinition,   SPFeatureDefinition featdefElement, String sElementId)    
    at   Microsoft.SharePoint.SPCustomActionElement.BuildCustomControl(TemplateControl   tctlParent)    
    at   Microsoft.SharePoint.WebControls.FeatureMenuTemplate.CreateChildControls().
    SPWeb is missing it's CurrentUser for   user 'SHAREPOINT\system'.
    System.NullReferenceException: Object   reference not set to an instance of an object.   
    at   Microsoft.SharePoint.SPUser.get_UserToken()    
    at Microsoft.SharePoint.Publishing.CommonUtilities.<>c__DisplayClass1.<RunWithElevatedSite>b__0()    
    at   Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()    
    at   Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback   secureCode, Object param)    
    at   Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated   secureCode)    
    at   Microsoft.SharePoint.Publishing.CommonUtilities.RunWithElevatedSite(SPSite siteNonElev,   Boolean allowUnsafeUpdates, ElevatedSiteProcessor callWithElevatedSite)    
    at M...
    ...icrosoft.SharePoint.Publishing.CacheManager..ctor(SPSite   site)    
    at   Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean   useContextSite, Boolean allowContextSiteOptimization)    
    at   Microsoft.SharePoint.Publishing.WebControls.ConsoleUtilities.IsMasterPageGalleryUrlForSite(Uri   uri)    
    at   Microsoft.SharePoint.Publishing.WebControls.ConsoleVisibleUtilities.ConsoleAppliesInCurrentContext()    
    at   Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs   e)    
    at   System.Web.UI.Control.LoadRecursive()      
    at System.Web.UI.Control.LoadRecursive()    
    at   System.Web.UI.Control.LoadRecursive()      
    at System.Web.UI.Control.LoadRecursive()    
    at   System.Web.UI.Control.LoadRecursive()      
    at System.Web.UI.Control.LoadRecursive()    
    at System.Web...
    ....UI.Control.LoadRecursive()    
    at   System.Web.UI.Control.LoadRecursive()      
    at System.Web.UI.Control.LoadRecursive()    
    at System.Web.UI.Page.ProcessRequestMain(Boolean   includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Leaving Monitored Scope (Request   (GET:http://infoshare.swic.edu:80/SitePages/Home.aspx)). Execution   Time=78.9268136821824

    Hi LonF1,
    For solving your issue, please try to update the SuperUser and SuperReader per the article below:
    http://technet.microsoft.com/en-us/library/ff758656.aspx
    $wa = Get-SPWebApplication -Identity "<WebApplication>"
    $wa.Properties["portalsuperuseraccount"] = "<SuperUser>"
    $wa.Properties["portalsuperreaderaccount"] = "<SuperReader>"
    $wa.Update()
    If this issue still exists, please feel free to let me know.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Sharepoint 2010 farm full backup

    I do full backup to sharepoint 2010 farm, in logs write
    Estimated disk space required: 94,251 MB.
    Backup
    Backup Method: Full
    Top Component:
    Configuration only: False
    Progress updated: 5
    Backup threads created: 10
    at the start of the backup is the approximate size of
    94,251 MB (about 92.05 GB), and in the end
    all backup files weigh
    19 GB. At the start and at the end of
    all sizes backup files
    do not match. Why?

    When you take backup, it require double size of the backup which is actually there, after this the compression happens.
    Also check below:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/f93e5daf-575d-4565-8d25-9d74a0b7906a/backup-estimated-disk-space-required

  • Cloning SharePoint 2010 farm with everything same

    Hi,
    I have one SharePoint 2010 farm running live with SQL server 2008 R2. SharePoint is in one server, Active Directory is in one server and SQL database is in another server. I am creating a clone of the existing SP farm.
    I have created a private network where all 3 clone servers are connected (SP, SQL and AD). Before that, I have updated windows server 2008 R2 with latest updates and service packs. I have prepared the AD server, SQL database server and SP server within the
    private network with same name, same IP address and everything same as my production server where production server is live. I have installed SP and connected with SQL database and AD with only the configuration database i.e only Central Administration is
    running now.
    Now I am wondering what will be the next procedure to-
    1. Install Nintex Workflow, MS Office Webapps and other related software in SP server and update all with latest packs.
    2. How to deploy the SSL certificates.
    3. How to restore the farm database.
    4. How to update SP with latest packs OR any other issues may arise during this process.
    Because, i want to keep my production server live while I prepare the clone environment.  
    Please give some advice.
    Thanks in advance.

    Hi,
    I have restored the farm backup and trying to access my web applications. I have two web applications one is Extranet and another is Intranet with SSL. 
    When I request for Intranet:-
    It asks which authentication I want and display a drop down list where only Windows Authentication is there; there is no login prompt for AD users. 
    When I request for Extranet:-
    It shows An unexpected error occured.
    I get the following error in the event log-
    1.
    Error: RuntimeFilter: Failed to load all runtime filter configurations or the runtime filter component. Exception has been thrown by the target of an invocation.
    Event Type: Error
    Event Source: SharePoint Foundation
    Event Category: Devices
    Event ID: 6631
    Task Category: Web Parts
    User: NT AUTHORITY\IUSR
    2.
    Load Control Template file/_controltemplate/ManageCrawlRulesControl.ascx  failed. Thread was being aborted .
    For any request it takes huge time to load including the central admin page.
    Waiting for your guidance.
    Thanks.

  • What are the steps to change existing sharepoint 2010 farm database server to a new server

    Hi
    i have a sharepoint 2010 farm and backend with sqlserver2012 standard edition on windows server 2008 r2 server
    now what are the steps to if  want to  connect this farm to a new sql server 2012 on windows server 2012 server and remove this existing server
    adil

    You have two options:
    Use a SQL Alias and you will then need to swing all databases over to the new SQL Server
    Don't use a SQL Alias and swing all but the Configuration and Administration databases to the new SQL Server, and individually re-configure Service Applications/Web Applications to use the new SQL Server. This will force you to keep the old SQL Server around.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Profiles being reset after windows updates?

    Hi All
    I'm having issues with Outlook 2013 SP1 resetting our users profiles after Windows Updates have been applied. Their profiles are being reset whilst their previous profiles are being renamed to "BACKUP of <profile name>".
    Office 2013 x86 has been deployed via VL Media onto Win7 x64 machines and we are distributing the ImportPRF registry key via GPO (set to Update) in order to customise the profiles on first run. (basic email account and attaching a default PST file)
    It appears that after windows updates are applied outlook is triggering the first run process again and therefore resetting the users profiles back to the standard set in our PRF.
    We used this method to configure Outlook 2010 and for the years of deploying Office 2010 we never had any issues. Can anyone suggest what might be going on here or what might have changed in Office 2013?
    Thanks

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Added a content database from Company A's SharePoint 2010 farm to ours

    I have added a content database from a company (Company A) that we are acquiring. The sent it my SFTP, we downloaded it, added it to the sql db, and I added it as a content database to a SharePoint 2010 farm  at our company (Company B) that is built
    to the exact build that Company A's farm was built to.
    Presently, the database resides in our Development Environment which is a single server that interacts with SQL, which resides on a different server.
    If I copy the URL for the site collections from the Company A's DB (from the site collection list), the content renders perfectly, but  when I attached the database to a Web application that was tied to a host header with an IP address on the DNS Server
    here, at company B, the content doesn't render at all. The only thing that happens is that I am asked to enter my credentials. None of the farm credentials or my credentials (all domain users) work.
    I have made myself via the farm administration password the owner of the site content, but I must be missing something, because I get this error from the page when I try to render it:
    <b>Error message 401.2.: </b> Unauthorized; Logon failed due to server configuration. &nbsp; Verify that you have permission to view this directory or page based on the credentials you supplied and the authenticatio methods enabled
    on the web server.
    I am wondering if this has something to do with the origin of the content, due to the fact that it was created on a different farm under completely different credentials and what I have to do to get it to work outside of the server as content
    under a new Web app.

    Hi,
    Do you have any update?
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • Dell Latitude E6520 fails to boot after Windows Updates

    Hello, 
    I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
    a recovery disk and run: 
    dism /image:D:\ /cleanup-image /revertpendingactions
    This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending: 
    kb2982378
    kb2978742
    kb2977629
    kb2976897
    kb2973112
    kb2972211
    There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
    2014-09-18 10:52:04:214
    496 540
    AU Install complete for all calls, reboot  needed
    2014-09-18 10:52:04:216
    496 540
    AU Successfully wrote event for AU health state:0
    2014-09-18 10:52:04:623
    496 8a4
    AU UpdateDownloadProperties: 0 download(s) are still in progress.
    2014-09-18 10:52:04:623
    496 8a4
    AU Triggering Offline detection (non-interactive)
    2014-09-18 10:52:04:623
    496 8a4
    AU AU setting pending client directive to 'Reboot Pending'
    2014-09-18 10:52:04:623
    496 8a4
    AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
    2014-09-18 10:52:04:625
    496 8a4
    AU Successfully wrote event for AU health state:0
    2014-09-18 10:52:04:625
    496 1668
    AU #############
    2014-09-18 10:52:04:625
    496 1668
    AU ## START ##  AU: Search for updates
    2014-09-18 10:52:04:625
    496 1668
    AU #########
    2014-09-18 10:52:04:626
    496 1668
    AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
    2014-09-18 10:52:04:626
    496 166c
    Agent *************
    2014-09-18 10:52:04:626
    496 166c
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-09-18 10:52:04:626
    496 166c
    Agent *********
    2014-09-18 10:52:04:626
    496 166c
    Agent  * Online = No; Ignore download priority = No
    2014-09-18 10:52:04:626
    496 166c
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-09-18 10:52:04:626
    496 166c
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-09-18 10:52:04:626
    496 166c
    Agent  * Search Scope = {Machine}
    2014-09-18 10:52:05:210
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:07:170
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:09:475
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:09:569
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:11:590
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:14:999
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:16:887
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:18:753
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:19:623
    496 1668
    Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
    2014-09-18 10:52:20:673
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:22:573
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:22:773
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:24:464
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:24:651
    496 1668
    AU AU received handle event
    2014-09-18 10:52:26:366
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:27:520
    496 1668
    Shutdwn user declined update at shutdown
    2014-09-18 10:52:27:520
    496 1668
    AU Successfully wrote event for AU health state:0
    2014-09-18 10:52:27:520
    496 1668
    AU AU initiates service shutdown
    2014-09-18 10:52:27:520
    496 1668
    AU ###########  AU: Uninitializing Automatic Updates  ###########
    2014-09-18 10:52:28:206
    496 166c
    Agent  * WARNING: Exit code = 0x8024000B
    2014-09-18 10:52:28:206
    496 166c
    Agent *********
    2014-09-18 10:52:28:206
    496 166c
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-09-18 10:52:28:206
    496 166c
    Agent *************
    2014-09-18 10:52:28:206
    496 166c
    Agent WARNING: WU client failed Searching for update with error 0x8024000b
    2014-09-18 10:52:28:253
    496 1668
    Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
    2014-09-18 10:52:04:216-0600 1
    193 102
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Content Install
    Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates:  - Security Update for Windows 7 for x64-based Systems
    (KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
    (KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
    for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
    for Windows 7 for x64-based Systems (KB2978742)
    2014-09-18 10:52:28:253
    496 1668
    Report CWERReporter finishing event handling. (00000000)
    2014-09-18 10:52:28:253
    496 1668
    Report CWERReporter finishing event handling. (00000000)
    2014-09-18 10:52:28:425
    496 1668
    Service *********
    2014-09-18 10:52:28:425
    496 1668
    Service **  END  **  Service: Service exit [Exit code = 0x240001]
    2014-09-18 10:52:28:425
    496 1668
    Service *************
    Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.

    Hi ChristianBoman,
    We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
    http://windows.microsoft.com/en-us/onedrive/share-file-folder
    for the update error 0x8024000b,  please refer to the following article.
    http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
    Please take the following steps:
    1. Run the Windows Update Troubleshooter.
    2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
    3. Copy the following text, and then paste it into the Run text box:
    Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
    4. Click OK.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Windows Update Error 800B0109 after Windows Update Agent 7.6.7600.320 Installed

    Hi, I have this error message when running windows update, it happened after Windows Update Agent 7.6.7600.320 installed.
    Any idea how to resolve this?
    Thank you.

    Hi,
    Please make sure that your antivirus application does not scan the files in the
    %windir% \SoftwareDistribution directory on any computer on which Windows Update Agent is installed.
    You can also temporarily turn off the antivirus application and check the result.
    Or run the following commands, and press Enter after each command:
    Net stop wuauserv
    cd %systemroot%
    Ren SoftwareDistribution SoftwareDistribution.old
    Net start wuauserv
    Try to install updates again.
    Yolanda Zhu
    TechNet Community Support
    I tried the commands as well, still prompting the same error.
    Thanks

  • Firefox won't start after windows update

    After windows Updated my computer Firefox won't start. I tried a clean reinstall two times, won't work. When I tried to start the firefox the first time after booting my computer it comes with the following message.
    XML Parsing Error: undefined entity
    Location: chrome://mozapps/content/extensions/update.xul
    Line Number 14, Column 1:
    <wizard id="updateWizard"
    ^
    Any Help would be greatly appreciated. I like firefox and I'm using it the last 7 Years.
    Thanks
    DK

    I cheated a little bit and put the issue url in a working version of firefox:
    chrome://mozapps/content/extensions/update.xul
    What I got was a page that looked like this below and console:
    blah blah parser:
    <pre><nowiki> xml-stylesheet
    xml-stylesheet
    <wizard id="updateWizard" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul" title="Firefox Update" windowtype="Addons:Compatibility" branded="true" onload="gUpdateWizard.init();" onwizardfinish="gUpdateWizard.onWizardFinish();" onwizardcancel="return gUpdateWizard.onWizardCancel();" onclose="return gUpdateWizard.onWizardClose(event);" buttons="accept,cancel" pagestep="1" currentpageid="dummy" firstpage="true" lastpage="true">
    <script type="application/javascript" src="chrome://mozapps/content/extensions/update.js"></script>
    <stringbundleset id="updateSet">
    <stringbundle id="brandStrings" src="chrome://branding/locale/brand.properties"></stringbundle>
    <stringbundle id="updateStrings" src="chrome://mozapps/locale/extensions/update.properties"></stringbundle>
    </stringbundleset>
    <wizardpage id="dummy" pageid="dummy"></wizardpage>
    <wizardpage id="offline" pageid="offline" next="versioninfo" label="Firefox is working offline" onpageadvanced="return gOfflinePage.onPageAdvanced();">
    <description></description>
    <checkbox id="toggleOffline" checked="true" label="Go online now." accesskey="G" oncommand="gOfflinePage.toggleOffline();"></checkbox>
    </wizardpage>
    <wizardpage id="versioninfo" pageid="versioninfo" next="mismatch" label="Checking Compatibility of Add-ons" onpageshow="gVersionInfoPage.onPageShow();">
    <label>
    Checking your add-ons for compatibility with this
    </label>
    <separator class="thin"></separator>
    <progressmeter id="versioninfo.progress" mode="undetermined"></progressmeter>
    <hbox align="center">
    <image id="versioninfo.throbber" class="throbber"></image>
    <label id="versioninfo.status" flex="1" crop="right"></label>
    </hbox>
    <separator></separator>
    </wizardpage>
    <wizardpage id="mismatch" pageid="mismatch" next="checking" label="Incompatible Add-ons" onpageshow="gMismatchPage.onPageShow();">
    <label></label>
    <separator class="thin"></separator>
    <listbox id="mismatch.incompatible" flex="1"></listbox>
    <separator class="thin"></separator>
    <label>
    Firefox can check if there are compatible versions…
    </label>
    </wizardpage>
    <wizardpage id="checking" pageid="checking" next="noupdates" label="Checking for Compatible Add-ons" onpageshow="gUpdatePage.onPageShow();">
    <label></label>
    <separator class="thin"></separator>
    <progressmeter id="checking.progress"></progressmeter>
    <hbox align="center"></hbox>
    </wizardpage>
    <wizardpage id="noupdates" pageid="noupdates" label="No Compatible Add-ons Found" onpageshow="gNoUpdatesPage.onPageShow();">
    <description></description>
    <separator class="thin"></separator>
    <hbox id="updateCheckErrorNotFound" class="alertBox" hidden="true" align="top"></hbox>
    <separator class="thin"></separator>
    <description id="noupdatesCheckEnabled" hidden="true"></description>
    <vbox id="noupdatesCheckDisabled" hidden="true"></vbox>
    <separator flex="1"></separator>
    <label></label>
    <separator class="thin"></separator>
    </wizardpage>
    </nowiki></pre>
    I do not see much about coloum 14, but I am guessing this file is stored somewhere and its corrupt. Update.xul suggests that it is the update file. Do you still have this in your downloads folder? There are two places for update and for a clean reinstall:
    [http://www.mozilla.org/en-US/firefox/new/] in a private window will give you a new install or you can choose from here: [https://www.mozilla.org/en-US/firefox/all/]
    This is what the file should look like; [http://hg.mozilla.org/mozilla-central/log/7a2edc5171e6/toolkit/mozapps/extensions/content/update.xul] If you can copy and paste that file from a working browser we can see the issue, but it will just look the same as the error.
    if you can replace the contents of the file locally with what it should look like it will fix the error, but who knows if there are other errors. May be best to delete the updater and save all the profile folder contents.

  • I want to backup my pinned tabs and my bookmarks as they have been lost several times after windows updates

    several times after system crashes and sometimes after windows updates my pinned tabs have disappeared. How can I back up the pinned tabs and bookmarks??

    Firefox stores the bookmarks and the browsing history in the places.sqlite database file..
    There are 10 rotating daily JSON backups (bookmarks-####-##-##.json) in the bookmarkbackups folder within the Firefox profile folder, one for each day that Firefox is started.
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    Pinned (App) tabs and tab groups are stored in the sessionstore.js file.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    See also:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Maybe you are looking for

  • I have jvc gy-hm100 video cam.I would like to know which format is best for final cut pro?

    My camera has a every size of resoloution. From 1080-60/30 to 720-24.It is totally compatiable with FCP.What i would like to know is what format is recomended for music video's and film production.Any info is greatly apprec!!!! Thank you! P.S. Ive be

  • I was editing a post in Tumblr and my work went away to the right. How do I get it back?

    I do not know what I did. AFAIK, I was typing normally, and then, whoosh! Half an hour's work just vanished off to the right-hand side of the window. HELP! How do I get it back?

  • Want to see the previous file name in the selection screen field

    Hi, I am working with flat file upload. Now my problem is in the selection screen field when i press space bar or backspace i want to see the previous file path which i have taken before. How to do this functionality. Thanks in advance, Vijay.

  • Help for Focus problem (gone)

    In a JDialog, there is a JButton. Clicking the button to popup a JPopupmenu with a JTree inside. clicking the tree node, the foucs is gone! Please help! Thank you very much! --tc                                                                        

  • Apps Fail to install via sync

    Hello, Whenever I try to sync a game from my computer, it says "iTunes Sync - AppName Fail to Install". And when I download directly from AppStore on my iphone, the game wont downloads, but it stucks on "waiting". Model: iPhone 4 iOS: 6.0 (10A403) Tw