After Yoesmite the frame rate of my computer games has seriously dropped can I get help? And will Apple sort out these bugs?

Looking for help since 10.10 my games have seriously become sly dobecome difficult to play

WWhy would you post this in iPhone 4s?  I chose iPad

Similar Messages

  • When will apple sort out the scrolling issues on iOS versions of iTunes and the App Store?

    When will apple sort out the scrolling issues on iOS versions of iTunes and the App Store?
    It seems impossible to get the horizontal scrolling to work smoothly and in a way that doesn't result in some albums/apps in the row being skipped.

    Working fine for me. Have tried resetting or restoring?
    tt2

  • Someone stole my ipod touch and i dont know how to get to my pictures on my windows computer. i did back up my pics to icloud. and, will Apple give me another ipod?

    Someone stole my ipod touch and i dont know how to get to my pictures on my windows computer. i did back up my pics to icloud. and, will Apple give me another ipod? i am so sad.

    Hello Becky,
    Have you double checked to make sure it hasn't been moved to a different page or folder?  Double check your iPod's Restrictions as well to make sure it hasn't been disabled.  To do this, head to Settings -> General -> Restrictions.
    Default Apps that came with your iPod or Apple's iOS cannot be removed.
    B-rock

  • Where is a link to the Premiere Pro CC 2014.1 (8.1) update? - Can I get help with the ticktime.cpp-290 error?

    Ola to precisando do premiere versao 8.1 caravan consegue o link?
    Message was edited by: Kevin Monahan
    Reason: needed better title

    Hi Kevin,
    I posted about the same problem (TickTime.cpp-290 error) in another thread, but since you're asking here specific questions to resolve it, I'm answering it here.
    Re: Debug Event: [...\ ...\src\TickTime.cpp-290]
    What were you doing when this error started to occur?
              Nothing special I remember. The only thing I do recall, is:
              I was working with Premiere Pro (where the main project is), After Effects but rendering some PNG sequence, and Adobe Media Encoder. I sent from AE to AME a project to render. Configured 2 outputs (PNG & MP4). The same way I sent from PP a project to render and one error occured. Unfortunately I didn't write down the error, but it was like a path C://AME_64/something. But the AME queue updated and everything seemed OK. I close AME to be sure that the error wouldn't be the source of future error during rendering, and relaunched it. And at that time I couldn't open it. I got the error "Adobe Media Encoder has encountered an unexpected error and cannot continue". The only way I found to resolve this is to remove the directory /Users/%USERNAME%/My Documents/Adobe/Adobe Media Encoder/8.0/". The problem seems to appear when I save the queue. And since that time, Premiere do the TickTime.cpp-290 error.
              Another thing I noticed, don't know if it was there before, is, the AEP file in AME queue setttings displayed framerate as "25 / 29.97 / 30 / ...", a 2 digits number for the framerate. But suddenly (I thought first it was because of the Premiere Pro file being added to the queue, but no because it appended after without it), it was displayed as "25 000 / 29 970 / 30 000", a 5 digit number.
              After that, the TickTime.cpp-290 appeared. Sometimes when opening project, sometimes and resetting or changing the workspace (because it was messed up), sometimes when closing.
    Do you have iCloud installed?
              No.
    Is this a Premiere Pro CC 2014.0 or Premiere Pro CC 2014.1 project that was updated to Premiere Pro CC 2014.2? If so:
              It started long time ago a draft in CS6, but since I reopen the project, I saved new versions in Premiere Pro CC 2014.2 (not sure if I have other version like 2014.1 or 2014.0). Is there a way to know which 2014 version are my files? If I look into the XML I only saw Version="28"
    Do you have a copy that can be opened in an earlier version?
                  An old draft version in CS6. But that version has footage in different framerate and not all be interpreted at the timeline framerate.
    Do you get the same error in that earlier version?
                   No error here, the file opens properly.
                  Additional info: I tried to open the 2014.2 file on another computer (where PP 2014.2 is installed) and same problem (this computer is on Win7 64-bit)
    Did you use any unusual footage types in your project?
         I used MOV (Animation), MP4 (H264), and PNG sequence. The framerates of the footages are 24,25,30 and 60fps (but everything has been interpreted in 30fps)
    If you remove them, do you still get an error?
                  When I had the error, but not when I open the project file, I resave the file removing anything not interpreted in 30fps (because at that time I still had footage interpreted in their original framerate). I was able to work for some time, but now I can't open it anymore despite that.
    Was the fps interpretation changed in any of the clips?
         Since the error appeared, and because I saw in another thread that it could be related to footage of different framerate, my timeline is now in 30fps and all the footage have been interpreted in 30fps. Footage are MP4, MOV, PNG sequence in 24, 25, 30 & 60fps.
    If so, restore them to their original fps and see if you still get the error.
                  Unfortunately, since I can't open the project anymore, I can't test that.
    Did you use Warp Stabilizer?
              No.
    Do you have any browser plug-ins?
              What do you call browser plug-in in Premiere?
    Are there any third party plug-ins used?
              I have Magic Bullet Looks 2, and I'm using it on this project.
    If so, remove the effect from those clips and see if it improves the situation.
                  Unfortunately, since I can't open the project anymore, I can't test that.
    Some additional infos on my computer.
    I use Windows 8.1 (64-bit),  all Adobe softwares installed have the last update (for video apps, it's 2014.2)
    The language settings are configured in French, but Windows and CC apps are in English.
    If needed the 2014.2 project file is here:
    https://dl.dropboxusercontent.com/u/68413846/showreel19_30fps.prproj
    Thanks in advance to help us to resolve this weird bug.
    Christophe.

  • When accessing my itunes library of music I get the notation on all songs ...The song could not be located because the origional file could not be found...how can this be corrected or did Apple wipe out all the files

    wien I access Itunes I get the notification....the song could not be located because the origional filoe could not be found...I have over 2000
    songs in my library ....Does this mean they are all gone....How can one retrieve them???

    This missing song thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    Once you've sorted out the broken links I've written a script called DeDuper which can help remove unwanted duplicates. See this thread for background.
    tt2

  • Where is the frame rate setting control when making a slide show?

    I am trying to make a slide show using QuickTime Pro and cannot find the frame rate control.I put all my consectively-numbered jpegs in one folder. I then clicked on "File," the "Open Image Sequence," then a window opened up and I click on the first jpeg in the series of photos I want in my slide show. Then the first image appears in the QT Window. The instructions next say that I should be able to change the rate at which each slide/jpeg appears, but it doesn't tell you where to find the "frame rate" so I can change it. It doesn't appear at all on its own, so where is it? Anything else I'm missing? Thank you.

    barbaric135
    What version of Photoshop Elements and or Premiere Elements are you using and on what computer operating system?
    In addition, could you please clarify?
    It sounds like you are creating your slideshow in the Elements Organizer. Where are you seeing these distortions and blurs, in the Elements Organizer Slideshow Editor Filmstrip or in the Premiere Elements workspace after you have transferred the slideshow from the Elements Organizer 9 Slideshow Editor to Premiere Elements workspace?
    What are the pixel dimensions of the photos in this slideshow and how many of these photos are in the slideshow? What format are they in..jpg, psd, other?
    With regard to what you wrote:
    Also how do I transport them from Elements to Premier, it has a tab to do that but when I get to the elements file I don't know where to drag and drop into.
    If you are in the Elements Organizer Slideshow Editor and use the Output option Edit with Premiere Elements, then you would expect the automatic transfer of the slideshow to Premiere Elements, with a copy in video format (.psess) in the project media as well as on the Timeline. Nothing for you to drag and drop.
    For all those reasons, I am asking for clarification.
    Thanks.
    ATR

  • How can I change the frame rate of a project in imovie 10?

    My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
    Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
    The goal was to make a freeze frame out of this "spezial" frame.
    Unfortunately I could not find this frame in the timeline any more - it's gone.
    I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
    The only solution I found is to decrease the speed of the clip to let's say 50%.
    But is there a better way?
    Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
    many thanks
    Rainer
    (from austria)

    iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame.  This is different from Imovie 9 which could handle 50 fps.  However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want.  After you have made a freeze frame I think you can switch the clip back to normal speed.  I am not aware of a better way in iMovie 10  By the way there is also no facility to export a still of a frame in iMovie.
    As a GoPro user I think FCP 10.1 would be the best choice.
    Geoff.

  • How to determine the accuracy of the frame rate using a Basler sca640-70gm?

    To whom it may concern
    I am guessing that the time between each frame varies from a nominal set frame rate.
    How do I set that nominal frame rate?
    How do I determine what the actual (frame by frame) frame rate or time between frames was in post pressing of the "video" image. 
    Thank you,
    Todd
    Solved!
    Go to Solution.

    It is almost impossible to measure the frame rate accurately by measuring the time between consecutive frames.  The latency of sending the images over the ethernet means they won't arrive at the computer with the same exact spacing they were taken at.  Also, measuring the length of one short interval in LabVIEW is also very difficult.  Windows latencies and other issues could make your measurement be off by quite a bit.
    The only way I can see to verify the frame rate is to use a digital input into a counter and wire the shutter signal directly from the camera into the digital input.  You could program the counter to measure between the rising edges of the shutter signal, and you would find out the frame rate is indeed very accurate and repeatable.
    The only other way I know to accurately measure the frame rate in LabVIEW is to measure the time over a large number of frames (thousands) and divide the number of frames by the total time.  Any minor errors in measuring the timing of a single frame go away with the large number of frames.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • Is there a way for the tracker to do key frames at the frame rate of the comp setting?

    I was doing some tracking in a 24fps project (yes my comp settings are correct) and I was really annoyed to see that the track looked to be generating key frames at 29.98fps. Of course this means crazy jittering.
    Is there a way I can change the rate that tracker generates key frames?
    Please help. I use CS3.
    Thank you in advance for your help.

    Mylenium said this:
    > Is the footage interpreted correctly? There has been some
    > discussion for CS4 about incorrect frame rate treatments in
    > pretty much all of Adobe's video-centric tools, but I'm not
    > aware of any particular issues with the tracker. Still, maybe
    > it is one of those bugs.
    redmike said this:
    > I was doing some tracking in a 24fps project (yes my comp settings
    > are correct) and I was really annoyed to see that the track looked > to be generating key frames at 29.98fps. Of course this means crazy
    > jittering.
    (I assume that you mean 29.97, not 29.98.)
    In all versions of After Effects, the motion-tracking keyframes are set at the frame rate of the footage item on which the layer is based, not at the composition's frame rate.
    Have you checked to see that your footage item is interpreted to be 24fps?
    Also, are you sure that this "jittering" that you're seeing is because of the rate of the motion-tracking keyframes?

  • After effects cs5 - frame rate mismatch wmv, flv, h264

    Hi all,
    I'm trying to render my compositions at 20 fps as wmv. Its important that they stay 20fps and that they are an exact length of time.
    Since upgrading to cs5 I've been unable to do so as After Effects can no longer render wmv files at 20fps. By default it renders wmv at 25 fps so my animations are now 20% too quick.
    According to adobe this is an issue with cs5 and wmv, flv and h264. It mentions a workaround online which involves creating a new output module
    please see link.
    http://kb2.adobe.com/cps/852/cpsid_85260.html
    When I follow this advice and create a new output module the problem is worse, they now render at 30fps so are now 50% too quick.
    For rendering wmv I am getting round this by rendering as Quicktime though I have yet to find a codec that offers file size and quality benefits of wmv.
    But my animations also have to be rendered as h264 for viewing on a mobile device. After Effects can no longer render h264 at 20fps and I cant find a way round it.
    Anybody got any ideas?
    Also if h264, wmv and flv are unconstrained formats why would Adobe constrain them to certain frame rates in CS5. Seems like a basic feature thats been around for years has been disabled.
    I tried tech support but they just sent me a link explaining what a frame rate is.
    thanks
    s

    Thanks for reply Mylenium, much appreciated. I dont think I do mis understand completely however.
    I understand some formats are constrained such as mpeg. And some wmv formats maybe constrained in some ways, but to quote Adobe online help
    "In After Effects CS5, there is a known issue that causes WMV and FLV output frame rates to be constrained unnecessarily."
    I have also found the same issue with H264 format.
    the online help goes on to say
    "By creating an output module template and applying this template to a render item, you bypass this bug."
    Unfortunately in my experience creating an output module template does not bypass the bug, but it makes it worse.
    The same projects worked fine and rendered correctly in CS3 as flv, h264 and wmv. The render issues occur in CS5. Like you say Adobe has the 64-bit environment to contend with.
    When you say manually over ride the frame rates in the encoder panel I guess you  are referring to Adobe Media Encoder which is an option and maybe would give better quality results too.
    thanks
    s

  • Would you like to change the frame rate of the project to 30 to match to m

    I just now moved some film clips from the Event Library to the Project Library and a white message window appeared saying: *MISMATCHED FRAME RATES. The frame rate of t his cli is 30 and the frame rate of the project is 25. Would you like to change the frame rate of the project to 30 to match the clip? And two radio buttons: Don't Change and Change.
    First of all, the other day I set my Sanyo VPC-HD2000A to shoot film at 1280 x 72 at 30 fps SHQ. Now I just checked and it is set at the topmost red zone960 x 540 at 30fps. The only thing I can think of to explain this is that I selected it but did not "set" it.
    Thus now I have a message asking what I noted above. Should I click CHANGE?
    WHY IS THE FRAME RATE OF THE PROJECT SET AT 25? How did I do that? What did I do that caused me to have a project that is set at 25 fps?????
    Time for another snack. 8-(
    -L
    A side issue is to find out why I set my Sanyo VPC-HD2000A at one rate (above) but now see that all the footage was shot at a different rate. Very very frustrating.

    AppleMan,
    It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
    I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
    I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
    Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
    -L

  • How do I set the frame rate to 12fps on my video, and it not change randomly?

    Hi, I imported a video layer from file then set the frame rate to 12fps, when I play the video it keeps changing the frame rate to random times. How do I keep it at 12fps

    Click the windows start button, then right click on computer, this will bring up a window that will tell you how much ram your system has.
    Also Start>Accessories>System Tools>System Information will give you all the details you need to know.
    As for Codec, That is an abreviation for code/decode it tells windows how to code when saving a video and how to decode when playing a video. Most formats are wrappers (avi, wmv, mov, rt) Each of these have a codec that you can choose from when saving a video, that codec then must be installed on the users computer to see that same video. Most formats come with a basic number of codecs and the creator of the video can purchase other codecs that provide better feature set.
    What the codec really does is takes the video and compresses it like a zip file then the user when playing require that codec to uncompress it.
    So each codec has its own strength and weaknesses. Some can compress more making a smaller file and perhaps inturn removes more data to get that compression and therefore has a poorer quailty video (just an example)
    I am sure you heard of a few codecs if you think about it. mpg, mp2, mp3, mp4, h.264 and so on. Mp3 is the only one I listed here that is for audio only. Yep thats right even audio uses codecs.

  • How to get the frame rate of my application

    Hi again...
    How can I get the frame rate of my application?
    I also want the frame rate value to be the title of the frame, updated every second. How do I do that?
    thanks in advance...

    To get the path where your application has been installed you have to do the following:
    have a class called "what_ever" in the folder.
    then you do a litte:
    String path=
    what_ever.class.getRessource("what_ever.class").toString()
    That get you a string like:
    file:/C:/Program Files/Cool_program/what_ever.class
    Then you process the result a little to remove anything you don't want:
    path=path.substring(path.indexOf('/')+1),path.lastIndexOf('/'))
    //Might be a little error here but you should find out //quickly if it's the case
    And here you go, you have a nice
    C:/Program Files/Cool_program
    which is the path to your application.
    Hooray

  • Is it possible to viw the frame rate (fps) on the finder?

    I have always been interested to see what the frame rate of my iMac is, but I can't work out how. I've searched the built in help, I have tried to search through the previous discussions on the topic but all with very limited success. There has to be someone who knows out. I've seen it done on Windows but have no idea on OS X. Also if I am playing a game I want to be able to see the frame rate "over" the game (if you know what I mean). Thanks in advance.

    The operating system really doesn't have a measureable frame rate other than the refresh of the monitor.
    Displaying the framerate in games is determined by the game settings.

  • Is it possible to change the frame rate of a motion template?

    Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
    Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
    If not in Motion, how else could this been changed?

    Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

Maybe you are looking for