After Yosemite remote printer is not recognized

Troubleshooting printer issues in OS X - Apple Support
and then
Mac OS X: How to reset the printing system - Apple Support

Similar Messages

Since upgrading to OS X yosemite my printer will not work.

Since upgrading to OS X Yosemite my printer will not work.

I found the solution in another thread. Thanks to frankglyn who posted it there.
I've just copied it here, as this seems to be the most active thread on this subject.
The solution (steps A to C) worked fine for me and others and should work for you as well, until Kodak will come with an updated driver. Then, you can revert the changes as also described below (steps 1 to 7)
A) in Spotlight Type Terminal and then press enter.
This should bring up the terminal window/program.
B) In the Terminal type sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
It will ask for your password.
C) After that type following: sudo launchctl stop org.cups.cupsd
After that if you are lucky the printer driver should start to work. (which it did in my case)
I hope this works out for you, if not then you can do following to revert the changes:
In case you want/have to revert the changes:
1) Open the terminal as usual (Spotlight type Terminal hit enter and wait for the terminal window to appear)
2) then type: cd /etc/cups
3) then type: sudo nano cups-files.conf
4) 'type in your password'
This brings up a command line editor which you can use to edit the file
5) Remove the last line which says Sandboxing Relaxed
6) press 'ctrl x'
And then confirm with y when being asked if you want to save the changes
7) after that type sudo launchctl start org.cups.cupsd

My Image CLASS MF4350d printer is not recognized by windows 8-64 bit

My Image CLASS MF4350d printer is not recognized by windows 8-64 bit any help how can i fix the problem. I just bought new HP computer from Future shop and it came with Windows in it. but this windows8 doesnt have drivers for my printer Image Class MF 4350d. Now I hve no clue how can i fix this isue. Because I checked on Canon website for drivers and downloaded and run the drivers, but no solution for my printer at all.

Yes. I have the latest version intalled but this hasnt helped.
I thought it could be to do with the Shuffle not having enough of a battery charge.
So i plugged it into the wall charger and then tried this didnt work either.
It wont even play music for some reason. The only information I get in the earpiece when I turn it on is what the battery level is at.

I just downloaded Java for OS X 2014-001 and my Epson Workforce 630 printer is not recognized? Any thoughts?

I just downloaded Java for OS X 2014-001 and my printer is not recognized. I use an Epson Workforce 630. Has anyone had similar problems?

Hi there wildwatercolors,
I would recommend taking a look at the printer troubleshooting steps found in the article below.
Troubleshooting printer issues in OS X
-Griff W.

After upgrade to OS X Yosemite my ringtones are not recognized on my i phone 5s

after upgrading to latest OS X Yosemite my ringtone makers new tones will not transfer to the tones files although they show up in the ringtone documents on my macBook air

Thank you for your quick response. My iPhoto is at version 9.6. I fire up iPhoto, it crawls and crawls and never loads and then get the message that my app is using all the memory, close all apps and try again. I killed all the other apps but still get memory is running out of space with 0% available message. I have 8 GB of memory and is rather odd that it would use all of it, after the upgrade to Yosemite.

USB Printer Sometimes Not Recognized on Reboot into OS X from Windows XP

Thanks in advance for any help. Here's the situation:
Everything works fine in OS X (10.5.2). In particular I have a USB laser printer that works find (Brother HL 2040).
Then I boot via Boot Camp into Windows XP and play a few games. Then I reboot out of XP and back into OS X. At that point sometimes the printer works and sometimes it doesn't. When it doesn't work what happens is that I will send a page to be printed, but nothing happens. Then when I shut down (or restart), the page will print.
I'd like to be able to print without having to shut down the computer - any help would be appreciated!

Though a different USB device (myTV.PVR) I have somewhat similar problem in Leopard, Windows (Vista). If I try to watch TV in OS (x) after having used it in (y) it will not work. Solution for TV is to pull device's power or USB out & put it back. Seems like the driver sees something foreign to it which is
re set by re plug.

Printer Driver Not Recognized

When I go into Devices and Printers, the Icon for my Computer shows the triangle error. I troubleshoot and it finally says that the default printer driver is missing or corrupt. I cannot print from my email program, Thunderbird. I can print from Word and Excel. This is strange. Can anyone help?

Thank you for all that information.
Satellite E105-S1802
Downloads are here.
HP Deskjet 3000 Printer - J310a
I can print from Word and Excel.
That's really peculiar. If the driver is missing, you should not be able to print at all. Can you print from Notepad (notepad.exe) and from Paint (mspaint.exe)?
Any yellow splotches in Device Manager (devmgmt.msc)? If so, show us lots of pictures. Dougle-click the device in question to open its Properties and show us Device status and so forth.
Tell us how this printer is connected.
In the meantime, let's looks after the System Restore problem. In most cases, this happens when shadow storage becomes corrupt. The fix is to turn System Restore off and then turn it on again. Unfortunately, that removes all previous restore points.
Turn System Restore on or off
-Jerry

Cannon EOS 40D and a MacBook Pro OS X Yosemite.My Mac is not recognizing my camera anymore

My Mac recognized the camera last night and imported the pictures I took. This morning, I cannot upload new photos. (I did drop my camera, but it works fine -THANKFULLY - so I am not sure why that would make a difference). My Mac is not even recognizing that the camera is plugged into it. I went into ulitities and my camera is not showing under the USB when it is plugged in. I have put in a new battery in my camera and rebooted my Mac and nothing is working. I appreciate any idea you have on how to fix this!

The cameras are fairly rugged and can take a few knocks (they're not that fragile)... but obviously there are limits. So if the knock or drop was hard enough, I suppose it's possible that you've damaged the camera. Does the body show signs of physical damage (did it fall hard enough to damage the body?) If you are using the Mac's "System Information" utility to check the devices connected via USB then it is important that you connect the camera BEFORE you start the "System Information" utility. This is because that utility only scans the connected devices when it is started and does not re-scan if devices are connected after starting. There is a menu option under "File" -> "Refresh Information" (or press Command+R) to refresh if the camera was connected after starting. If the utility does not show the device then something is wrong with the connection (e.g. loose or bad cable, bad port, bad hub etc.). I have gone through a number of external USB hubs with my own Macs. It took a while before I finally found a hub that worked reliably. I would frequently have devices that would show up in the device list when DIRECTLY connected to my Mac, but would NOT show up if connected to a hub (even "powered" hubs). For this reason, if you are having any connectivity issues, please make sure that you are connected the camera directly to the computer. Remember, there are no drivers needed for the device to show up -- so if it doesn't show up it is not a software problem. As a backup plan, it is possible to directly import the images from the computer into the computer without using the camera. I think the 40D uses Compact Flash, but you can get an inexpensive Compact Flash reader (I have a Lexar USB 3.0 reader that has both a CF card slot as well as an SD card slot.) This is actually my preferred method to perform imports because direct reading from the card is faster than transfering via the camera's USB connection.

HP M2727 printer/scanner not recognized as scanner

I have HP M2727 printer/scanner but the OS X system does not recognize the scanning function. Consequently I cannot use "Image Capture" or "Preview" to scan. The HP Director that was working does not now work. Currently on OS X - Version 10.9.5
Any ideas?

Have you checked for an update to HP Director?
VueScan
VueScan FAQ

Yosemite dual external monitors not recognized?

I upgraded my Macbook Air this morning to Yosemite 10.10 from Mavericks. Now, my Mac only recognizes one of my two external monitors. By this I mean that only one of my two external monitors appears in the Arrangement tab of the Display settings dialog box. This setup worked previously under Mavericks though the mouse motion was jerky on the USB monitor. Is this a bug or does Yosemite not support 2 external monitors? The external monitor that works for Yosemite is connected through the DVI port. The one that no longer works is connected through a USB port via an HDMI to USB adapter. I've rebooted my Mac and the monitor several times and tried the second USB port on my Mac. Both monitors are Samsung though they are different models. Suggestions?

Same issue - but I fixed it! I had the same issues with my MBP while running Mavericks. I tried updated to Yosemite (my co-worker runs Yosemite and has no monitor issues) to no avail. It still did not want to acknowledge any external monitors. Finally I did away with the HDMI connections altogether. I bought to DVI to Thunderbolt cords (Cable Matters, Gold Plated) from Amazon and BOOM! Fixed. Both monitors fire right up every time I plug it up.
I know its not a real fix...its still an issue that Apple needs to address, but it seems to be a great way to get around it until they do. Ive been using these cables for a couple of weeks now and still rocking. I hope this helps someone!
A little history for other to compare to.
MacBook Pro (Retina, 15-inch, Refurbished Late 2013)
Scenario 1: Mavericks 10.9.5
                    Monitor 1: HDMI to HDMI
                    Monitor 2: HDMI to HDMI via Mini to Thunderbolt Adapter
Scenario 2: Mavericks 10.9.5
                    Monitor 1: HDMI to Thunderbolt
                    Monitor 2: HDMI to Thunderbolt
Scenario 3: Yosemite Update
                    Monitor 1: HDMI to Thunderbolt
                    Monitor 2: HDMI to Thunderbolt
Scenario 4: Yosemite Update
                     Monitor 1: DVI to Thunderbolt
                     Monitor 2: DVI to Thunderbolt

AirTunes remote speaker menu not recognized in iTunes

When I first got my AirPort Express, I had no problems playing my iTunes music over stereo speakers connected to the AX. Now the Airtunes remote speaker menu does not show up in the lower right corner of iTunes. This problem started many months ago, around the time when I moved into a new apartment. Not sure how that would cause it, since I still had no trouble with internet access through the AX. At first, I tried to troubleshoot, but eventually just gave up on it. Now I've decided to give it another shot, but I've scoured the discussion forum for answers and found nothing that works.
Here's what I've tried so far:
I recently reset my AX multiple times (separate issue) and this did not do the trick. I have checked "Look for remote speakers" under the Advanced options in iTunes. I have set my ZoneAlarm firewall to "medium" setting (which is supposed to allow UDP port access), and even tried turning off the firewall altogether, then restarting iTunes. I have Symantec AV running, but I don't know of any options that would affect the port access. I have opened the AirPort Utility (v5.3.2) and noticed that the "Music" tab does not show up in the settings for my AX. It seems that other people who had the same problem as me were at least able to see the "Music" tab in the settings. Restarting my PC does not seem to help either.
BTW, I have iTunes version 7.7.1.11.
Any suggestions or advice would be greatly appreciated. Thanks very much in advance!
Dave
EDIT: I also tried "pinging" the IP address of the AX in cmd.exe and it showed me the few lines of code that it supposedly does when the AX is communicating with the PC properly.
Message was edited by: dave.matlin

bump

DPR 1260 Wireless Print Server not recognized on Macbook Pro

Please help. I am a first time Mac user. I have a D-link wireless print server that is connected to a HP Office Jet 6200 all in one. For some reason I cannot set up the wireless print server. A couple questions: I enter the IP address when I set up a new printer. Still nothing. Do I need to select IP printing when setting up a new printer? Is D-link wireless printing supported by Leopard? When I plug in direct via USB - Mac prints no problem. Tech support really couldn't help - neither could D-link. Does anyone know step by step how to set up? Explain it to me like I'm 4 years old. Thanks.

You have two issues going at once.
Driver - There are two kinds of print driver on OS X (not like Windows) - Carbon and CUPS. CUPS drivers are required to use the standard network print protocols provided in OS X by the CUPS system - IP printing and Windows printing. But HP doesn't provide CUPS drivers for non-postscript printers. They provide Carbon drivers where they have limited the driver to USB only. To get a CUPS driver for your model, install the 3 part hpijs:
http://www.linux-foundation.org/en/OpenPrinting/macosx
Print & Fax prefs setup -
I call your attention to page 19 of the print server manual. Dlink simply has "no clue" about OS X. The easiest comm protocol for you is HP Jetdirect, which equals TCP/IP raw port 9100. That is for USB port 1 -- for the other USB ports you will need to use advanced setup in Print & Fax.
So, plug the printer into USB port 1 and set up using IP printer > HP Jetdirect protocol, selecting your new hpijs driver.
Good luck.

After Yosemite upgrade, iTunes login not working

Hello everyone!
Just boght a new Macbook Air everything was flawless. I upgraded to Yosemite and iTunes login is not working. I keep getting the message "The Apple ID you entered couldn´t be found or your password is incorrect. Please Try again".
I use my apple ID across al devices (iPhone and iPad running iOS 8), use it for iCloud and App Store at the Macbook Air without issues. I have even tried to change the password in order to solve the issue, without luck.
Any ideas on to What might happen? Ihave tried to contact apple via phone but they bump me because tha kin of support is not available in Guatemala ( where I live)
Thanks in advance

Ok, in the end I was able to solve this myself.
(thanks to tips in other discussions)
What I did:
1. Close iTunes
2. Open folder C:\Users/<user name>/AppData/Roaming/Apple Computer/iTunes/Cookies
3. Delete the only file in that folder
4. Open folder C:\Users/<user name>/AppData/Roaming/Apple Computer/iTunes
5. Delete the two files (not folders) in that folder
6. Re-start iTunes and run it as System Adminstrator
7. Login works

Hiding something after it is printed but not before

I know that you can select buttons to be hidden after print and still show before when the form is being filled out, but what about jsut regular text? i tried doing the "invisible" code in the "preprint" box thing at the top, but it didn't work.
Help and Thank you!

Is there a print property to turn off the print? Otherwise try a readonly textbox without borders to simulate label then you should be able to hide from print.

After upgrade my keyboard is not recognized by Bluetooth

I just saw an upgrade notice come up on my computer so I hit install etc. Now my iMac 15" is updated to OS X 10.9.3 but the keyboard is no longer recognized by Bluetooth. The green light on keyboard keeps blinking green but it never connects. Any suggestions to help me? Glad I have another Mac to type on in the meantime.

If that doesn't work try pushing the Bluetooth sing in the top bar of your computer screen
There should be a list of all Bluetooth devices
Click on the name of your keyboard and then on connect

After Yosemite remote printer is not recognized

Similar Messages

Maybe you are looking for