After Yosemite Update Battery Wont Charge

After the Yosemite update my battery will not charge. Yellow light on power adaptor, reset SMC and PRAM - still nothing. Sits at 0%.
Any ideas?

Take the MacBook Pro and charger to an Apple store genius bar and have the techs test them to see if there is a coincidental hardware failure.

Similar Messages

  • My sons macbook 13 when I plug in to charge battery wont charge even after I bought new adaptor pug

    how to fix my sons battery  wont charge in fact when you plug it in . The macbook does not show it is plugged in.  Does anyone know how to fix this problem.  I even got a new plug adaptor.  and It does not even show that it is plugged in, this is a brand new issue.  Anyone have an answer to fix this.

    Try doing a SMC RESET and see if that sorts it out.
    Also inspect your power port to see if dirt has accumulated.
    Have a look at the link below and see if it applies to you.
    http://support.apple.com/kb/ts1713

  • My ipod touch 2g 8gb has no battery, wont charge on my pc or on my outlet 220W, and it wont turn on.

    My ipod touch 2g 8gb has no battery, wont charge on my pc (Hp Pavilion g6 intel Pentium 2.2Ghz, 2 gb) or on my outlet 220W, and it wont turn on. What should I do?

    Hi there fCdawg123!
    I have an article here that can address this issue for you and give you some further troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    As you may note, this article was written for the iPhone, but the steps for troubleshooting will be the same for your iPod touch. This is the section that I believe will help you the most with this issue:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Battery wont charge at high loads all of a sudden?!

    ANy help here would be appriciates, asap! thanks:P
    All of a sudden, as of today, my battery wont charge when the mbp is under a high load. I thought it was just not charging (was not charging in wow) and then realised as soon as i quit, it started to charge again. SO i ran 2 yes > /dev/null to test, and all of a sudden it stopped charging and the magsafe light went to green... (at 25%) as soon as i stopped one of hte processes, abck to orange, charging... started a 2nd up, stopped charging and started to use the battery again.
    Does ANYONE have any idea what is going on? i know macbooks can't cahrge under high loads, however, im on a MBP and it has never happened until this evening. Any ideas guys? could it be the bettery somehow, actual computer short not letting it get enough power.... anything? 3 month old mbp (3rd one, first two never had a problem, nor this until tonight)
    callign apple in morning, but hoping to resolve before since the closest store is hrs away.. thanks!
    james

    Hey,
    I've actually used yes to test it ( yes > /dev/null) in console to mac the cores, its standard on all systems. They've sent em a new power supply saying it sounds like 'it isnt getting all the current' basically, which, seems rather odd. it ONLY started after the keyboard update, as if the new firmware ***** more power ot eh usb hub and it just pushed it over.. maybe my magsafe was always busted nto working properly, but it's always worked for me.. I have a feeling i'm gonna be going into the store an hr away this weekend :/
    Had a friend who has NOT ran the update try, and at full loads he still charge fine, unplugged with it running to drain battery a bit, plugged in and it went ot charge, i tried again and it goes green and wont charge at a heavy load Oh, yea, and my laptop wont go on w/o battery and plugged in.. like it's not getting the full 85w, or.. somethign is toasted on my actual laptop. CCC here i come for a drive clone tonight! heh

  • My early 2008 Macbook Pro is suffering from black screen after Yosemite update

    My early 2008 Macbook Pro is suffering from black screen after Yosemite update. It ran beta 5 great but failed on restart after beta 6 install. There is no cursor but I can hear the HDD spooling up. I have tried booting in safe mode, PRAM reset and SMC reset but nothing works. After the first 5 days of every now and then trying to start it, it started fine. I used the machine all day with no problems, it had rolled back the install and was back on beta 5. I decided to try the update again, the same thing happened and it has stayed black for over a week now. It wont work with a monitor either. Help!

    Hello Adam,
    I would try instead of installing the beta software, to install the official build of OS X Yosemite from the Mac App Store to see if that gets you passed the no video issue when updating the beta software. 
    How to install OS X Yosemite on your Mac
    http://support.apple.com/en-us/HT6412
    Regards,
    -Norm G.  

  • So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

    So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone  shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
    Cannot receive any signal "searching" constantly.
    Turns off as soon as removed from usb ... wont stay on connected to laptop!
    HELP!

    The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
    Hardware can fail - it happens, which is why there is a one year warranty.

  • HT1476 My battery wont charge instead the battery gets drained

    I recently bought the iphone 5 in November and ever since it has had problems with the battery, As most people have. Recently my battery has gone down quicker and quicker. Now for some reason my battery wont charge at all. when connecting to the charger the phone delays in recognising it and when it is removed it still says its charging. Now when it is charging it does not charge but drain the battery faster. I have tried buying a new charger, using older charges. I have updated the phone and nothing. I dont know what to do.

    Make a Genius Bar appointment at your nearest Apple Store.

  • Usb port not working after yosemite update please help

    ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my  computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
    Anonymous UUID: 
    CCC4DCA9-48E9-4692-250B-488588FCC69E
    Sun Nov  9 17:58:17 2014
    *** Panic Report ***
    panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
    Backtrace (CPU 0), Frame : Return Address
    0xffffff8031663b80 : 0xffffff8029f3a811
    0xffffff8031663c00 : 0xffffff802a005eb2
    0xffffff8031663cf0 : 0xffffff802a0065e5
    0xffffff8031663d50 : 0xffffff8029fb6b4a
    0xffffff8031663e60 : 0xffffff8029facd2c
    0xffffff8031663e90 : 0xffffff8029f5c747
    0xffffff8031663ed0 : 0xffffff802a3c45ff
    0xffffff8031663f40 : 0xffffff802a3c425c
    0xffffff8031663f50 : 0xffffff802a44dcb2
    0xffffff8031663fb0 : 0xffffff802a03ac46
    BSD process name corresponding to current thread: suhelperd
    Mac OS version:
    14A389
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:
    0x0000000029c00000
    Kernel text base: 0xffffff8029e00000
    __HIB  text base: 0xffffff8029d00000
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 7052072843826
    last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver    1.0.12 (addr 0xffffff7fac6ba000, size 16384)
    last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC    4.2.2b5 (addr 0xffffff7fac717000, size 16384)
    loaded kexts:
    com.huawei.driver.cdc_ncm    2.7.2f16
    com.huawei.driver.dc_net    1.0.2
    com.huawei.driver.cdc_acm    2.6.2f17
    com.huawei.driver.cdc_usb_bus    1.0.3
    com.huawei.driver.HuaweiDataCardDriver    4.25.45
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AudioAUUC    1.70
    com.apple.driver.AGPM    100.14.37
    com.apple.filesystems.autofs    3.0
    com.apple.iokit.IOBluetoothSerialManager    4.3.0f10
    com.apple.driver.AppleOSXWatchdog    1
    com.apple.driver.AppleMikeyHIDDriver    124
    com.apple.driver.AppleHDA    266.5
    com.apple.driver.AppleMikeyDriver    266.5
    com.apple.driver.AppleSMCLMU    2.0.4d1
    com.apple.driver.ApplePolicyControl    3.7.21
    com.apple.driver.AppleLPC    1.7.3
    com.apple.driver.AppleUpstreamUserClient    3.6.1
    com.apple.iokit.IOUserEthernet    1.0.1
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AppleHWAccess    1
    com.apple.driver.AppleHV    1
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.AppleIntelHD3000Graphics    10.0.0
    com.apple.driver.AppleIntelSNBGraphicsFB    10.0.0
    com.apple.driver.AppleBacklight    170.4.12
    com.apple.driver.AppleMCCSControl    1.2.10
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.3.0f10
    com.apple.driver.AppleSMCPDRC    1.0.0
    com.apple.driver.AppleThunderboltIP    2.0.2
    com.apple.driver.SMCMotionSensor    3.0.4d1
    com.apple.driver.AppleUSBTCButtons    240.2
    com.apple.driver.AppleUSBTCKeyboard    240.2
    com.apple.driver.AppleIRController    327.5
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    35
    com.apple.iokit.SCSITaskUserClient    3.7.0
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.6.5
    com.apple.driver.AppleUSBHub    705.4.1
    com.apple.iokit.AppleBCM5701Ethernet    10.1.2b3
    com.apple.driver.AppleFWOHCI    5.5.2
    com.apple.driver.AppleSDXC    1.6.5
    com.apple.driver.AirPort.Brcm4331    800.20.24
    com.apple.driver.AppleAHCIPort    3.0.7
    com.apple.driver.AppleUSBEHCI    705.4.14
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleRTC    2.0
    com.apple.driver.AppleACPIButtons    3.1
    com.apple.driver.AppleHPET    1.8
    com.apple.driver.AppleSMBIOS    2.1
    com.apple.driver.AppleACPIEC    3.1
    com.apple.driver.AppleAPIC    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
    com.apple.nke.applicationfirewall    161
    com.apple.security.quarantine    3
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.0
    com.apple.iokit.IOUSBMassStorageClass    3.7.0
    com.apple.AppleGraphicsDeviceControl    3.7.21
    com.apple.kext.triggers    1.0
    com.apple.iokit.IOSerialFamily    11
    com.apple.driver.DspFuncLib    266.5
    com.apple.kext.OSvKernDSPLib    1.15
    com.apple.iokit.IOAudioFamily    200.6
    com.apple.vecLib.kext    1.2.0
    com.apple.driver.AppleHDAController    266.5
    com.apple.iokit.IOHDAFamily    266.5
    com.apple.iokit.IOFireWireIP    2.2.6
    com.apple.driver.AppleSMBusPCI    1.0.12d1
    com.apple.iokit.IOSurface    97
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.AppleGraphicsControl    3.7.21
    com.apple.driver.AppleBacklightExpert    1.1.0
    com.apple.iokit.IONDRVSupport    2.4.1
    com.apple.driver.AppleSMBusController    1.0.13d1
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.3.0f10
    com.apple.iokit.IOBluetoothFamily    4.3.0f10
    com.apple.driver.IOPlatformPluginFamily    5.8.0d49
    com.apple.iokit.IOUSBUserClient    705.4.0
    com.apple.driver.AppleSMC    3.1.9
    com.apple.driver.AppleUSBMultitouch    245.2
    com.apple.iokit.IOUSBHIDDriver    705.4.0
    com.apple.driver.AppleUSBMergeNub    705.4.0
    com.apple.driver.AppleUSBComposite    705.4.9
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.7.0
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.0
    com.apple.driver.AppleThunderboltNHI    3.1.7
    com.apple.iokit.IOThunderboltFamily    4.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.3b3
    com.apple.iokit.IOFireWireFamily    4.5.6
    com.apple.iokit.IO80211Family    700.52
    com.apple.driver.mDNSOffloadUserClient    1.0.1b8
    com.apple.iokit.IONetworkingFamily    3.2
    com.apple.iokit.IOAHCIFamily    2.7.0
    com.apple.iokit.IOUSBFamily    705.4.14
    com.apple.driver.AppleEFINVRAM    2.0
    com.apple.driver.AppleEFIRuntime    2.0
    com.apple.iokit.IOHIDFamily    2.0.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    300.0
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.AppleKeyStore    2
    com.apple.driver.AppleMobileFileIntegrity    1.0.5
    com.apple.driver.AppleCredentialManager    1.0
    com.apple.driver.DiskImages    389.1
    com.apple.iokit.IOStorageFamily    2.0
    com.apple.iokit.IOReportFamily    31
    com.apple.driver.AppleFDEKeyStore    28.30
    com.apple.driver.AppleACPIPlatform    3.1
    com.apple.iokit.IOPCIFamily    2.9
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    com.apple.kec.Libm    1
    com.apple.kec.pthread    1
    Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
    Serial ATA Device: ST9320325ASG, 320.07 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: Hub
    USB Device: HUAWEI Mobile
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    Thunderbolt Bus: MacBook Pro, 20080d.0

    I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them.  The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
    I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
    Any Help out there?
    Hardware Information: ℹ️
    MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
    MacBook Pro - model: MacBookPro11,3
    1 2.3 GHz Intel Core i7 CPU: 4-core
    16 GB RAM Not upgradeable
    BANK 0/DIMM0
    8 GB DDR3 1600 MHz ok
    BANK 1/DIMM0
    8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless:  en0: 802.11 a/b/g/n/ac
    System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 1:43:41
    USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. BRCM20702 Hub
    Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad

  • Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

    macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. 

    I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
    This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
    After making your backup try the following:
    Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
    Launch the App Store, click the "Store" menu, and sign in with your AppleID.
    Open the main page of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

  • Mac mail CRASHING after Yosemite update 10.10.3

    Are you KIDDING APPLE?
    mac mail CRASHING after Yosemite update 10.10.3
    The program is completely unusable and crashed after update.
    Computer is less than 1 month old and can't run a basic mail program
    I REALLY HOPE APPLE FIXES THIS BUG ASAP    
    Without fix I will return the computer

    True,
    I also have AppleCare, but unfortunately, after calling them they can't determine what is creating the problem either.
    Other forums have shown other troubleshooting steps which didn't solve my problem, but may help others:
    Mail app keeps crashing after Yosemite update
    Mail crashing after upgrading to 10.10.3
    Lets cross our fingers that 10.10.4 will be out shortly to fix this

  • Lacie Rugged external drive will not show up after Yosemite update.

    Lacie Rugged external drive will not show up after Yosemite update.  It show up in disc utility I can't access it.

    I have the exact same issue. Have you had any luck with a solution?

  • After yosemite update I'm unable to type in word

    After Yosemite update I am now unable to type in any of my word documents. Any suggestions?

    Sorry for hijacking your post -
    I have had an issue with my Lumia 820 too after installing the Amber update.
    The phone once updated displayed " restarting " and from that point on has failed to go beyond the screen that displays the Nokia logo.
    Spoken to Customer care guys and tried hard resetting the device but to no avail.
    Unfortunately for me i haven't made a back up of the data i have on the phone and I have extremely important business contacts and other relevant info that I can't afford to lose, hope I am provided with a solution. 

  • My new battery wont charge at all...???

    I just replaced my battery in my Macbook Pro because my old battery wouldnt hold a charge.  My new battery wont charge at all...???  Could it be the adapter?  The green light is on.

    Have you reset the SMC?

  • Satellite L655 - battery wont charge

    Hi
    Can you help me please? my battery wont charge Toshiba Satellite L655 , I have Buy it last year my warranty finish.
    Every time I have to remove the battery and put it in then the battery is charging and the led for battery get yellow until it get full then the led stop flashing and if I unplug the power it works good but it wont charge if I plugged until I remove the battery again.
    Thanks for help

    Hi
    I think the new battery should be tested but before doing this be sure that you use the latest BIOS
    I means either its battery issue or notebooks power supply electronic issue and before the notebooks hardware would be checked, the notebook should be tested using new good working battery.

  • Mac Mini wont' Display Sleep after Yosemite Update

    My Mac Mini is no longer going into Display Sleep. Instead I now see the Screen Saver.  I have checked System Preferences | Energy Saver and it is definitely set to Display Sleep after 10 minutes (The default). What is interesting is that if I try to change the Display Sleep time (e.g. to 1 hour), when I go back into Energy Saver, it is back to 10 minutes - this doesn't look right!  In fact none of the options (e.g. Wake on LAN) seem to stay changed.
    This seemed to start after the update to Yosemite 10.10.1 a few days ago - but that might be coincidental. Until then Display Sleep had worked fine.
    Any suggestions?
    Thanks
    Nick

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    defaults read /Library/Preferences/SystemConfiguration/com.apple.PowerManagement | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

Maybe you are looking for

  • Server_mgr.ftp  error!    How to restore default setup?

    OK Newbie Problem. I had problems getting the Apple Server builtin Ftp server/Service to stop (and not restart every time on boot) so I could use PureFTPd. After reading some commentary on similar problems by other users (bad idea) on the FTPServer/C

  • Legacy C program - new Java GUI and calling methods

    Hello, I am fairly new to these forums. I've been working for a company that has an exsisting program that is a propriotery video-client to a video-server. It is written in C and has DirectX components for the standalone C application and ActiveX com

  • How do I properly setup an Extreme (802.11 n) + Express wired Network

    Hello, I have been trying to make my setup work properly for weeks now with little success. I have spoken to multiple IT professionals as well as apple care to get this working properly but to no avail. Here's my goal, I would like to have an airport

  • Standard report on vendor wise QC rejection

    Dear All, Can any body suggest me a Standard report to find vendor wise quality rejections for a period. Regards Kantha

  • Process Flow Validation Warning.

    Hi All, OWB Config Details is as follows: Oracle 9i Warehouse Builder Client: 9.2.0.2.8 Oracle 9i Warehouse Builder Repository: 9.2.0.2.0 1> Following Warning is displayed when Process Flow is validated in Process Editor in OWB. VLD-10005: The follow