After Yosemite update canon mx860 does not work wirelessly

Yosemite version10.10.1
MacBook Pro (13-inch, Mid 2009)
Canon driver 11.7.1.0
Since downloading yosemite I can not print wirelessly. I have the latest software from apple and canon. I have followed all the advice from both sites.
I have deleted and reset the printer. I have turned off both my printer and my router and turned them back on.
I have downloaded the most recent software. I am still only able to print on the usb.
On the printer the WLAN setting list says that the connection is active and it is connected to the correct SSID. The WLAN setting also says that it is in communication mode.
What ideas do you have for me to try next?
Thank you very much,
Willie

I ran across your question while having a very similar problem. I was able to finally fix mine by unplugging both my modem and router. I see that you've already done that. When I was reading through other questions, I saw that a few people had fixed the problem by setting a static IP for the printer through the router. I barely know what I'm talking about here. Just thought it may be of use. The discussion was here: Support Code:300 The printer does not respond. About the 4th page of responses. Best of luck to you!

Similar Messages

After yosemite upgrade junk mail does not work - is this a known issue

after yosemite upgrade junk mail does not work - is this a known issue?

Yes, it is a problem.

After the OS 6 update my speaker does not work. My music plays but no sound comes out. Can someone help me with this issue? I currently have the 4S.

After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.

try to activate and desactivate the airplne switch a couple of time

My canon printer does not work with firefox12

my canon printer does not work firefox 12 edition

Try to reset the print prefs.
See:
*http://kb.mozillazine.org/Problems_printing_web_pages
*https://support.mozilla.org/kb/Printing+a+web+page
There are other things that need your attention.
Please Update to the latest Firefox 17.0.x version.<br />
The Firefox Firefox 12.0 version that you currently run is no longer supported with security updates
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version

I have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

I have the same problem. After updating to 6.1.2 my iPad 3,2 will not find Verizon network. It just says "Searching..." for ever. Any thoughts?

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

After an update my airport is not working. It won't turn on. Do I need to redownload a driver, and how?

After an update my airport is not working. It won't turn on no matter how many times I press the turn on Wi Fi button. Do I need to redownload a driver, and how?

Hello
Try this
plug a WIERED mouse , start up your imac , hold on mouse buttons for 30-40 second at least by chance cd could be ejected
HTH
Pierre

HT4972 i have gotan update on my itunes that should allow me update my iphone 4g from ios 4 to ios5 but whenever i try to update it it does not work what do i do

i have gotan update on my itunes that should allow me update my iphone 4g from ios 4 to ios5 but whenever i try to update it it does not work what do i do

Well... if you really want help, you could start by providing some details of what happens when you try to update.

I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

You need to reinstall the printer driver, and set up the printer on the new hard drive.
The Canon site should have the driver. Download it and install.
Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions.

After the update my earbuds will not work for my music BUT will work fine for phone conversations

After the update my earbud will not work for music BUT will work for phone conversations

this might sound dumb but how do i do that because that is probably the problem

After update menu button does not work

tried a restore that does not work.. tried the five r's nothing has helped
worked fine then updated now doesnt not work.. flicking hold from on to off now does what menu used to do and goes a page back..

lol i update with the newest software for my mini then the software makes my menu key no function.. i GET ZERO HELP and they want me to pay 229 for repairs thats just to priceless

I upgraded my Mac Pro to Yosemite and now CS5 does not work.

Help.....Adobe Photoshop CS5 does not load now that I upgraded my MacPro to yosemite....anybody have this problem and how was it fixed?

Yes. The Yosemite upgrade is notorious for damaging CS5 installs. Please reinstall and let us know how it goes.
Also make sure Yosemite is upgraded to 10.10.1
The reinstall will set your instal to 12.0.0 If Help > Updates does not work, go here Adobe - Photoshop : For Macintosh
download and apply the updates for Photoshop and Adobe Camera Raw.
Gene

Upgraded to Yosemite and now camera does not work. Please help.

I just bought a new iMac 27" computer today. I brought it home and it told me I needed to update my iOS. So i did.....now my camera does not work. Does anyone know a fix?
Message was edited by: MCO98

Scott SV wrote:
Hi there - I just completed a leopard upgrade. Strangely enough, after installation and the subsequent reboot, i cannot get the finder to work. Upon clicking on the finder it just sits there and gives the 'waiting' signal (rotating multicolor circle). I opened the activity monitor and killed it, clicked again. nothing. Rebooted numerous times.. nothing. I also tried to install the leopard software update. The files download fine but will not install. I assume this has to do with the finder problem. Any ideas on how to fix this? thanks!!
There are really two "Finders," the one in the dock and the one that actually runs the GUI.
When you click on your desktop, you see the Finder menu on the top right. Do any of those functions work?
For example, if you click Go->Home, does the Finder window open as normal?
If so, you may simply have a corrupted Finder alias in your dock.
I would first run DU and perform a disk check and repair permissions.
How to get to DU? Again, if the top right Finder menu works, select Go->Utilities and run DU from there.

Updating iTunes - Keyboard does not work anymore...

I updated iTunes on both my computers today...
Now im experiencing problems on my computers:
- Keyboard on both computers does not work.
- I cant log off or shutdown computer on both computers(Have to force shutdown with powerbutton)
Now i have uninstalled iTunes and everything from Apple INC, still have the same problems...
Does anyone have a solutions to these problems....

After waiting for computer to shutdown for 30 min, I then got a bluescreen:
Driver_power_state_failure
Looked it up and seems like the new iTunes update have messed up the USB drivers on my computers...
Ive tried to reinstall the USB driver, but it does not work(just hangs)
Apple you messed up my computers with your software...
So please give me a solution to this.
Thanks!

Apple software update for windows does not work properly

Apple software update does not work properly

I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

After Yosemite update canon mx860 does not work wirelessly

Similar Messages

Maybe you are looking for