After

Hi
After upgrading to Snow Leopard, my Macbook Pro ends in a reboot-loop. There is a little rectangle on screen after around roughly 40 seconds stating in about 5 languages to reboot the machine: press the power button for a few seconds to turn off then turn machine back on. It then boots again into the same window. And again, and again and again.
I booted the Snow Leopard DVD to repair the access rights but with no success. Back to endless reboot state.
The upgrade itself was without any glitches, while machine was up an running, after a time machine backup, the upgarde startetd and I selected options, the language packages that I wanted added rosetta and was asked where to install the upgrade to. And the result was the endless reboot situation.
Any ideas what could cause this? E.g. Paragon NTFS or Silverfast Scanner drivers?
Now I resotore from Time Machine and hope to get the machine state before upgrading back.
Regards,
Thomas

scarabaeus wrote:
Hi
After upgrading to Snow Leopard, my Macbook Pro ends in a reboot-loop. There is a little rectangle on screen after around roughly 40 seconds stating in about 5 languages to reboot the machine: press the power button for a few seconds to turn off then turn machine back on. It then boots again into the same window. And again, and again and again.
That is a *kernel panic.* They are usually caused by hardware, but can be software as well.
First, disconnect all the peripherals. If they stop, connect one at a time until you find the culprit.
If they continue, the problem is inside. Run the Apple Hardware Tests, using the second disc that came with your Mac. That's not an intensive test of everything, but should get you started.
If still no help, here's more Kernel panic info:
http://support.apple.com/kb/HT1392
http://www.index-site.com/kernelpanic.html
http://www.thexlab.com/faqs/kernelpanics.html

Similar Messages

Iphoto crashing after using mini-dvi to video adapter

Hi, IPhoto on my Macbook is crashing. I can open it, then as soon as I scroll down it locks up and I have to force quit.
This started happening right after I used a Mini-DVI to Video Adapter cable to hook my macbook up to my TV. The adapter/s-video connection worked and I was able to see the video on the tv. But iphoto immediately locked up the computer when I went to slide show and now it locks every time I open it.
Any ideas?
Thank you:)
Dorothy

It means that the issue resides in your existing Library.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

How do I install all my old programs and data from an old system folder after I have reinstalled the same OSX system after a crash?

The system is OSX10.5.8 Leopard on a 2009 imac. A new system was installed from the installation disks and the original system saved to a folder.
I need to use my Adobe programs, rescue my email, i-tunes and iphoto data. The disk utility indicates that my Time Machine back-up disk is damaged and I don't want to take a risk of having Time Machine erase my hard drive and try to reinstall the exact system existing at the time of the crash. There was over 650 gb of stored files that I was copying and removing from the drive at the time it crashed. The total size of the original system file is still about 650 Gb.
I would prefer to go back in Time Machine and only rescue the programs as most of the files have been copied to external hard drives, but I can't access the back-up hard drive from the new version of the Time Machine. Or by I don't want the Time Mchine to start copying the new operating system which would include all the data in the old system file. Time Machine was working fine at the time of the crash.

No, the disk was backed up with time machine a few hours prior to the crash. I was unable to open the computer when I tried to restart it- got a grey screen with the spinning disk- after a few minutes the screen would go black and would reboot continuously, but not load any images or programs. I started the computer from the 10.5.4 installation disks and checked both the time machine external hard drive and the Imac internal drive with the disk utilities. Both showed as damaged --the internal drive and permissions were repaired, but the external drive (time machine back-up) was damaged and not repairable by disk utilities. I don't believe that the external drive for Time Machine was connected to the computer at the time of the crash as I was copying files to a different hard drive drive. And I was not having any problems with the TM back-up drive prior to the crash.
I accessed the Imac internal disk by firewire (as a target disk) and copied as many data files as I had room for on my external hard drives available. And I deleted quite a few files from the imac internal drive (mostly just jpegs, duplicate tifs, etc--nothing that was used by i-photos, i-tunes or the Mail program).
Then I installed a new OSX10.5.4 system from the installation disk and the old system was moved to a folder on the hard drive. I previousy had had the option to reinstall the complete system from Time Machine when I connected that drive and booted with the installation disks with the C key depressed. But it didn't seem like a good option because I was unsure of the condition of that external disk and whether it would be able to reinstall my data correctly, once it had erased my internal hard drive.
I'm considering buying some new external hard drives and backing up the present system to time Machine (so I'll still have my old data in the old system folder). And then I would try using the old Time Machine back-up to try to reinstall the sytem previous to the crash. That back-up would reinstall about 700gb of data and operating software and programs which sounds like a lengthy back-up. Since I have never used Time Machine to do a full reinstallation (I've only used it for individual files), I'm reluctant to do anything rash.
I'm a professional designer (with a deadline) but I can still use my Illustrator and Photoshop by opening them from the old system folder and saving the files to an external drive. So it's not neccessary to do anything hasty except to delete some of the excess art and document files that were causing the computer to run slowly and the Adobe programs to crash when I tried to save my work. I have quite a few books on tape in the i-tumes folder which is probably talking up tons of space but I don't where the i-tunes files live.
Thanks for any help. Peggy
Message was edited by: peggy toole

Adobe Photoshop CS2 shuts itself down after printing..

Not sure whether I'm in the right place to post this..
In my workplace, we just bought some new iMacs for design class. They are a 2GHz with Intel Core Duo, and has 1GB 667 Mhz DDR2 SDRAM, and running Mac OSX 10.4.8.
The Photoshop CS2 is version 9.0
I've config-ed the five new iMacs so they can print to a printer, using IP printing. Problem is, most of the time after the students sends the document they want to print to the printer, Photoshop CS2 just shuts itself down. Then the dialog box saying 'the software just unexpectedly quit' appears.
It is confusing me, because our older iMacs (that's not an Intel-based) doesn't have this problem, at all.
is it something to do with CS2 compatibility with Intel-based Macs? or something else.. what needs to be done to stop this annoying problem?
Regards,
Meru
iMacs Mac OS X (10.4.8)
eMacs, iBook G4s Mac OS X (10.3.9)

Windows 7 error “key not valid for use in specified state” | The Oracle Instructor

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

How to restore playlists and ratings after hard drive format

Several people have reported problems restoring paylists and ratings after reformating a hard drive. Here is what worked for me and what did not.
I had to reformat my hard drive. Before doing that I exported my playlists from itunes to another hard drive as an xml file. I also copied the folder with all my songs to another drive. (Also of course had it backed up on DVDs.)Then I copied the itunes library files (see url http://docs.info.apple.com/article.html?artnum=93732) to anoher drive.
After reformating my hard drive and installing the lastest verion of ITunes, I copied the actual songs back into a subfolder in my music folder. I then told iTunes to import the subfolder with the actual music. That resulted in a restored library that lacked playlists and ratings.
Don't do this
I purchased Anapod ($30.00) because its web page said (http://www.redchairsoftware.com/anapod/):
"Anapod CopyGear is an easy-to-use, compact utility for copying music tracks, playlists, podcasts, photos, and videos from your iPod back to your PC."
Well, I did transfer 104 playlists back to my iTunes library through the Anapod backup function. However, the transfer also put more than 20 gigs of duplicate songs into the library. All of the songs listed in the playlists were duplicated in iTunes. I could find no way in Anapod to simply copy the ratings and the playlists. Anapod documentation was outdated. For example the online help pages said that playlists could not be backed up. This was confusing because I had just done that.
"In a future release we will be adding the ability to backup your iPod playlists. This will allow you to generate backup files of your iPod playlists on the computer. These files will not be usable on your computer though. They can only be used to restore playlists at a later time on your iPod (assuming it still carries all the audio files referred to in that playlist)." This text is from url http://www.redchairsoftware.com/anapod/support/tome/tx2pc.php#5.1.2
I sent requests to Anapod for help today, but they have not been answered yet. Docs truly did not seem to help. Would have been good if there was a pdf file rather than just an online help html file that seemed outdated.
This worked for me:
I ended up having iTunes wipe out the entire library because of all the dups Anapod made. (Made sure that iTunes only wiped out library and did not delete actual songs from hard drive. Then I had iTunes import my subfolder with songs again. That brought me back to where I was before wasting money and much time on Anapod.
After I had my iTunes library up (without ratings and playlists and after finding Anapod did not meet my needs.
1. I imported the xml file to which I had exported playlists before reformating hard drive. That gave me the playlists back although an error message said some items not copied because the music tracks listed in playlists were not in my iTunes library. --Possibly I deleted songs after playlists were downloaded some time ago to iPod. Importing the xml file is probably not necessary because of what I did below.
2. Quit iTunes
3. Because my song ratings were still missing, I then moved the iTunes library files made by the new version of iTunes into a different folder.
4. Then I put my old version 4 library files into the place where the library files should be.
5. Then I crossed my fingers and restarted iTunes. It took awhile to start and said it was updating my library files. Now I have back most or all of my playlists and ratings.
If problems develop, I will probably wipe out iTunes library and use Anapod to move everything from my iPod into a folder and tell iTunes to import that folder. That approach might avoid the dups that Anapod makes when restoring playlists to iTunes.
So my message is keep your actual songs backed up somewhere (such as DVD's and anotehr hard drive) and keep a duplicate copy of your library files somewhere not on your hard drive. With these items you should be able to restore iTunes library to its former status.
Sorry for the length of this message. Hope it helps someone.

The simple version of above:
iTunes Files to Backup (anytime you make additions or changes to the Music or Library that you want to retain)
1) All music files in their current folder structure (usually located in and under the ‘iTunes Music’ folder)
2) The Library database file: ‘iTunes Library.itl’ located in the ‘iTunes’ folder
3) The Library XML file: ‘iTunes Music Library.xml’ located in the ‘iTunes’ folder
4) Any XML playlist files created for Playlist retention
5) The two iTunes.pref files (optional)
-- C:\Documents and Settings\<your username>\Application Data\Apple Computer\iTunes\iTunes.pref
-- C:\Documents and Settings\<your username>\Local Settings\Application Data\Apple Computer Inc\iTunes.pref
6) The XML file of Ratings, Play Counts and Last Played attributes saved from the main Library and created by Otto’s SaveRatings script (also optional, but recommended):
“Download this: http://ottodestruct.com/itunes/SaveRatings.zip . It's a program, just run it like any other program. Run it on the machine where you're copying the info from BEFORE you move the files to the new machine. Click the "Save Ratings" button and it'll create a ratings.xml file. Now when you move the files, move the program and this file as well. Then after you make your new iTunes library, run it again and click the "Restore Ratings" button. Voila, all your information is back in the Library. Well, most of it anyway, it's not perfect. It'll tell you what songs it couldn't figure out though, and there's usually not very many.”

Can not refresh ValueObject after altering database table

Hello All,
In FB4, in order to refresh a service, I used to
- select a service operation
- select configure return type
- select auto-detect
- hit next and on the follow page select the existing ValueObject
...it would update.
As far as I can see, this does not work in FB4.5. Instead, after selecting auto-detect and clicking next:
There was an error while invoking the operation. Check your operation inputs or server code and try invoking the operation again.
Reason: Warning: mysqli_stmt_bind_result(): Number of bind variables doesn't match number of fields in prepared statement in...
Is there a way to refresh a ValueObject. Clicking refresh is a no go.
Thanks for your help!
J

hey jay. did you ever figure out how to update your valueObject? I just posted a similar discussion "changing php-service in FD breaks AS3 service class and valueObjects" here: http://forums.adobe.com/thread/882288
maybe we'll get a reply....

Can not refresh page after save properly(When not saving master record)

I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
In some use case I have Address as master table and Person as detail table
For some business reason I need to don't save same addresses
eg:
If +1 Test St+ is in database already and new user coming and adding this address with new person
I need to use the row in database not creating a new address
I do saving in doDML method of Address with some hashing algorithm and it is fine
My problem is that I can not refresh page after save properly
User coming to page think Adding a new address and a new person but in fact no new
address added because of business I describe above
Any ideas how I can implement this?
Appreciate that
Regards
Mohsen

Hi,
from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
Frank

Can not refresh snapshot changes after importing data of master site

Hello !
I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
thinks in advance!
(exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
(imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
null

You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
HTH,
-- Anita
Oracle Support Services
null

Refresh Dlookup data in the active row of a datasheet after modifying data

Difficult to explain - so I will give you my scenario -I have three tables Student, Home Room and Teacher - the Student is linked to a home room and the home room is linked to the Teacher. In my form using Student, I show the student, the home room and the
Teacher for that home room. (The student file has the HomeRoomID in it). I show the teacher by looking up the teacherID using the HomeRoomID (using Dlookup on the HomeRoom table to get the teacherID), save it to a textbox IDTeach. Using another Dlookup on
the Teacher table using IDTeach I get the teachers name in a textbox call TeacherLast
Works fine! - however if the home room is changed, using a combobox, the teachers name does not change -it does change if the data is refreshed (The HomeRoomID in the Student Table is of course changed)
My goal is to have the teacher name change in the row where the when the homeroom is changed.
I went to the Event - after Update on the combo box and tried to update the teacher ID and teacher name by using
Private Sub HomeRoom_AfterUpdate()
    Form![IDTeach] = DLookup("[TeacherID]", "Home Rooms", "[HomeRoomID]=Form![HomeRoomID]")
    Form![TeacherLast] = DLookup("[Last]", "Teacher", "[TeacherID] = Form![IDTeach]")
End Sub
But this doesn't work (Run time error 2448) because, I believe, it is trying to update all the rows in the datasheet.
Is there some way to qualify these statement to only work on the current row like
Form.currentrow.IDTeach = DLookup("[TeacherID]", "Home Rooms", "[HomeRoomID]=Form.currentrow[HomeRoomID]")
or is there and easier way (or anyway for that matter)?
Thanks

There is a 1 to 1 relation between the student and the teacher - a 1 to 1 relation between the student and the home room,  but a 1 to many relation between the teacher and the room.
Surely not? It would be a very exclusive educational establishment where every student had their own personal teacher, and their own personal room. A one-to-one relationship type between Teachers and Rooms is understandable, but is not the relationship
type between Rooms and Students one-to-many? The relationship type between Teachers and Students would also be one-to-many of course, but no enforced relationship needs to be created for this as it is implicit in an enforced relationship between Rooms
and Students. Diagrammatically the model would be:
Teachers----Rooms----<Students
A form simply needs to be based on a query which joins the three tables in this way with editable controls bound to the columns from Students and a read-only control bound to the Teacher column from Teachers. The control bound to the foreign key Room
column in Students would be a combo box. Once a room is selected the Teacher for that room would automatically show in the read-only text box bound to the Teacher column.
To make a control read-only BTW set its Locked property to True and its Enabled property to False.
Ken Sheridan, Stafford, England

Couldn't log into SAP System (message 00264) after SAP_BASIS update

Hello,
we performed SAP_BASIS update to SAPKB70023 and get a problem with logon into a SAP system with message 00264 (Status &2 of the user interface &1 missing).
We have a 64-bit non-Unicode system on Solaris/SPARC/Oracle and Kernel level 333.
We tried to import MENUSYST program from note 1285869, but nothing happened at all. The parameter abap/unicode_check we set to "on" but this didn't help us.
So after selecting system record in SAP Logon now we get the initial logon screen with no "new password" button and error 00264 (Status 0020 of the user interface SAPMSYST missing.) and couldn't log into the system.
We have no idea why correct and existing statuses are not working.
Please suggest us what to do to fix this problem.
Thanks in advance!

Check this,
http://forums.sdn.sap.com/thread.jspa?threadID=835278
it may be useful.
Regards,
Ravi

IPhone syncs Voice Memos after unchecking sync box in iTunes

I do not want to sync my voice memos from my iphone to itunes so i have unchecked the sync voice memos option and they still continue to sync over and itunes creates a playlist for voice memos. I have tried this numerous times and even after a restore it still happens? Anyone have any ideas?

It will happen automatically. iTunes always syncs voice memos to your iTunes library when you connect iPhone to your computer. All you can do is delete them or ignore them.
Keep in mind that if you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
The "Include voice memos" button in the iTunes Music pane for your phone is only for syncing your voice memos playlist back to the phone.
http://www.apple.com/iphone/how-to/#voice-memos.syncing-voice-memos

Voice Memos Issues After IOS 8 Upgrade

After upgrading to IOS 8 on my iPhone 5s, the majority of my voice memos are missing and the ones that remain no longer have titles or even play back on my phone. Any ideas?
Thanks.

I was able to recover my voice memos, though the original titles are gone.
I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

Lost voice memos after iOS 8 update

Before my very eyes all my Voice Memos disappeared off my iPhone 5s after the IOS 8.0.2 upgrade. The application was doing some weird things before it deleted every Voice Memo - wobbling and shimmering. Any ideas anyone?

Try Dr.Fone to scan your iPhone for the voice memos.

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

After

Similar Messages

Maybe you are looking for