Aftermarket mouse and keyboard

I'm looking to see if there's any good aftermarket wireless keyboards and mice that are Mac specific? I'd prefer black as well since I have a black MacBook. I've looked around and most of the wireless keyboards and mice that are PC and Mac compatible have key layouts for a PC. I'd really rather have one that's Mac specific. I'd even use the white aluminum one if they made it with a numberpad like the wired one. I have the white aluminum wired keyboard and Mighty Mouse. I like it fine for the office. But I need something for home. Any suggestions?

I know I only posted this thing a half an hour ago, but I got it running in a weird way. I hope this helps someone else.
I rebooted again and all was the same except that this time I noticed the generic "guest" user. A small aha, and I clicked on it, it opened to the stock Desktop photo but with no icons or files. Thinking nothing's happening, I clicked on System Preference anyways in the tray, still nothing, but about 30 seconds later, Preferences fired up, I went to BT and it was turned off, which it wasn't on my main profile. After a few second delay it started recognizing my stuff. After the Keyboard and mouse fired up, I turned on the Magic Pad, it too initiated. I've left the LMP Bluetooth Keypad shut off for now, I had a hard time getting it running when I got it at Xmas and it seemed to affect my Apple Wireless Keyboard a little at that time, and want to work for a week or so before before introducing it again.
Nothing magic, just seeing the not so obvious is what did it. I'd still like to know how all this happened in the first place but so happy to be back at it!

Similar Messages

Problem with xfce and/or mouse and keyboard

Hi!
Two days ago I've turned on my laptop with Arch and the display manager Slim has frozen immediately. Later on Single-User mode I've uninstalled it. Now in normal mode when I type "startxfce4" everything is showing up, but the mouse and keyboard don't work. I know it's not frozen, because animation of mouse and CPU Frequency Monitor is on.
Strange fact is that laptop is not connecting with the Internet, so now I don't know where the problem is.
It's happening when I start xfce both from user and super user.
Just before those troubles I've updated everything with "pacman -Syu", but I haven't seen anything strange. Also the computer could have been roughly turned off (by unplugging power supply), when was turning on.
Thanks,
Gaba

Sorry for not replying, but I didn't have access to my laptop by this time.
On grub I have only normal mode and 'fallback' mode, so I have result from 'journalctl' from normal mode.
I'm sending the fragment of this file where you can see everything after I typed 'startxfce4' in console:
http://codepad.org/8pYIj8qC
I see that something is wrong, but after some attempts I don't know how to fix this ^^
Edit:
Oh, I forgot to write, that I've tried activate some drivers from 'lspci -k' (there were no "Kernel driver in use:..." in almost every device), but it didn't fi anything.
Last edited by gargoyle (2015-03-15 23:20:18)

USB mouse and keyboard not working

Any advice/thoughts/suggestions appreciated:
All 3 USB ports at the back of my iMac have stopped working. This means I can't use either a keyboard or mouse, so have no way of logging in. I turn my iMac on, it boots up as usual, but when it gets to the login screen, the mouse and keyboard don't work and I get a message about bluetooth set-up. (Both my mouse and keyboard are wired, not bluetooth).
I have tried an SMC reset (by turning the iMac off, unplugging all USB devices and the power cable, leaving the iMac for a few minutes and then plugging the cable back in a turning it on again). This didn't work.
I've also tried a different version of the SMC reset where I hold down the power button whilst all the cables are unplugged and also as I plug the power cable back in. After doing this, the fan turns on at full speed (v loud), but the mouse and keyboard still don't work.
I've also checked my mouse on a different computer and it works fine.
Has anyone got any other suggestions / workarounds?
Note I can't do a PRAM reset because my keyboard doesn't work.
Is it probably that the USB hardwear has failed? If so, is it possible to repair this? It is worth repairing given it is a 5/6 year old iMac (the white plastic one) which is probably on its last legs anyway?
many thanks!
Jez.

Try the SMC reset again, only this time wait 5 minutes in set 3 instead of fifteen seconds.
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds. 5 minutes.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.

USB mouse and keyboard don't work on HP Pavilion g7 2203sd, Windows 8.1.

It is not possible to use a USB mouse or keyboard on the HP Pavilion g7 2203sd notebook running Windows 8.1.
A wireless mouse used to work (already some time ago), but now wired or wireless mouse and keyboard don't work any more.
I have tried removing USB devices in the Windows Device Manager and let Windows detect them again, but it does not work.
I read somewhere that it might have to do with the xHCI USB controller that is installed.
I tried removing that and connecting the USB mouse but no succes.
I also looked for driver updates or something to disbale in the BIOS (like xHCI), but nothing found for that.
Can anybody help me with this problem.
Thanks!

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are having issues with the Keyboard on your Notebook.
We will surely assist you with this.
Let’s start with a questions.
1. Was there any liquid split on the Notebook Keyboard
2. Is there any Dust settled on the Notebook Keyboard
3. Are there any Keys which are fallen off / Any Keys which are loose
Troubleshooting:
Step 01. Could you please check and verify if External Keyboard works fine or not?
Note: Please click on the below shown link to find more troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03738933&tmp_task=solveCategory&cc=us&dlc=en&lc...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

TS3048 turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

Try resetting the SMC (no peripherals required).
Barry

External mouse and keyboard no longer work after 10.8.5 upgrade

Today I upgraded from OSX 10.8.4 to 10.8.5 on my macbook pro 17". This upgrade caused by external mouse and keyboard to completely stop working. I tried installing the 10.8.5 "combo" install (http://support.apple.com/kb/DL1676) and also tried resetting the PRAM, but neither action had any effect.
I also tried restoring to an older time machine backup with 10.8.4, but could only figure out how to restore files, not the entire system.
I've lost a day of work at this point, I need help... How can I get back to 10.8.4 or get the mouse/keyboard working again on 10.8.5??

Try booting into the Safe Mode. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application uninstaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

[solved] mouse and keyboard not working (and previous fix wont work)

i made a clean default setup with
arch
latest kernel - 2.6.29 i think
xorg 1.6.1
video-intel-legacy
on a 865G intel box + tried usb and ps2 keyboards + usb mouse
when i start X the mouse and keyboard dont work (and i have to hard reset the box) in all of the setups i tried. the AutoAddDevices fix suggested before does not work this time
- without xorg.conf
- with auto-generated xorg.conf (X -confogure)
- with the automatic conf +
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with tiny xorg.conf containing only
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with dbus/hal enabled and disabled in rc.conf
how i make it work
Last edited by ash (2009-04-30 19:01:41)

the setup that works to me now is
automatic xorg.conf with the AutAddDevices False (disable hotplug) lines
dbus and hal enabled in deamons
this lines instruct xorg to use xf86-input-mouse/keyboard instead of evdev. ie it looks like with evdev there is no point in xf86-input-mouse/keyboard
Last edited by ash (2009-04-30 18:26:16)

[Solved] Mouse and Keyboard Dont Work After BIOS Update

I spent the last few hours in windows 7 trying to prove to the guys over at MSFN that my problem wasn't driver or bios related by updating to the latest drivers and upgrading my bios to the most recent version. After I was finished I decided to boot back into arch to work some more on my custom kernel (since oddly it had the same problem before the bios update, the mouse and keyboard worked on one boot but once i rebooted into it again they no longer worked) and found that the keyboard and mouse no longer worked, thinking I had rebooted into the custom kernel by accident I rebooted and selected the default kernel once again only to find that the mouse and keyboard still didn't work.
Any ideas on how to fix this? I really don't want to reinstall since I just installed it last night.
Edit: Another silly mistake, i had renamed the original xorg.conf and never put back when I was finished. This makes me wonder why KDM even started up at all though.
Last edited by brando56894 (2010-01-08 08:04:21)

Hello base76, welcome to the HP Forums.
It appears that the mouse and keyboard aren't working correctly. I will try to assist you with this.
To start could you please provide the following:
Model and product numbers for you notebook.
Currently install operating system.
Were these working previously? If yes, were any changes made prior to them not working?
Have you attempted any troubleshooting? If yes, what have you tried so far?
I look forward to your reply.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Bluetooth mouse and keyboard do not work

I purchased an iMac G5 about 6 months ago. I got it with a bluetooth mouse and keyboard. I have had trouble with it from day 1. Apple had me replace the logic unit, and it worked for a couple of weeks. Then as soon as the 90-day warranty for complimentary service ran out, it began working sporadically. Now it doesn't work at all. It says I don't have a bluetooth module installed or attached to my computer (which is what it said before the logic unit was replaced. The computer works fine with a USB mouse and keyboard. Had I known bluetooth was so tempermental and difficult, I sure wouldn't have got it with my computer.
Unless there is a smart person out there who knows what is going on, I guess I need to buy a new USB keyboard and mouse. Anybody interested in buying a bluetooth keyboard and mouse cheap?

Russell,
The warranty period on your mac is 1 year. The complimentry phone service period is 90 days unless you have a hardware problem. I'd say you likely have a hardware problem and will not be charged for the phone call.
I'd suggest 2 things:
1. Sign up for Applecare as has been recommended countless times.
2. Make the call to tech support and see what they say about your problem.
Good Luck,
John

Brand new IMac 27 bluetooth mouse and keyboard not connecting for eight minutes after start up.

I have a new imac 27 that has worked flawlessly for three weeks.
All of a sudden, when starting up the mac boots fine but the bluetooth mouse and keyboard are non responsive. This state is maintained for between 7 and 8 minutes then both mouse and keyboard start working and continue doing so for the rest of the day....until the next restart and the whole saga repeats itself.
Both sets of batteries are fully charged.
I have scoured different sites and tried any suggestion that made any sense, to no avail. All I am able to do at the moment is to do the time, wait the 7 to 8 mins. and then all's good.
My first Mac and this is very annoying especially as Apple must be aware of this issue but no solution is forthcoming!
Any suggestions/workarounds would be great.
Thanks

if you are using rechargeable batteries sometimes they don't stay charged for as long as they should try using alkalaine batteries and see if the issue still persists.
also try doing an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964

Wireless Mouse and Keyboard Install Problem

I am trying to install my wireless keyboard and mouse onto my Mac OS X 10.3.9. My dad had this computer before me and had the mouse and keyboard paired and working. After it was shipped to me, I attempted to pair these again with no luck. THe bluetooth won't recognize either and if i try and run the KeyboardandMouse.pkg as instructed, the icon simply isn't there when I insert the disk. I've attempted to pair using the system preferences, but it cannot locate either the keyboard and mouse. Yes, I do have new batteries installed and the lights do blink when switched on. Any help is appreciated. Thanks.

Hello again:
Try trashing the BT preference file (com.apple.bluetooth.plist) and restarting.
If that does not work (although it will take you a bit of time), I think I would try an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Barry

Wireless mouse and keyboard won't connect.

I have a windows 7 computer and a wireless keyboard and mouse which connect to one usb receiver.
I was on the computer and suddenly both my mouse and keyboard stopped working.
The mouse lights up a red light but doesn't work. The computer says it can't recognize the receiver.
The usb receiver doesn't have a connect button. Perhaps the button is a sensor type, but it doesn't seem to make a light turn on.
Perhaps it doesn't work because i touched it with my foot. Please help

It would help me greatly if you identified your TouchSmart PC.
How to identify an HP TouchSmart PC.
Had you considered temporarily connecting a USB mouse and keyboard to enable you to install the original drivers from the Recovery Manager?
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Wireless mouse and keyboard not recognized

I know that I have had this issue before, but can't remember what the solution is (old age?) My iMac G5 PPC has a wireless mouse and keyboard (the old apple white one). The iMac came with these as an option but WITHOUT the bluetooth card inside. (I still don't know how this works, but it does). Anyway, the mouse and keyboard were not recognized when I tried to get on today. The batteries are good. If I go to system prefs (using an even older wired mouse) there is no bluetooth option (since no card is present). I don't know how to get the computer to try to recognize both. Any help is definitely appreciated.

HI David,
If the iMac didn't come with Bluetooth software/hardware, then are you using a USB Bluetooth dongle?
And open System Profile (Applications/Utilities)
Select Bluetooth on the left under Hardware. You may need to click the gray disclosure triangle so it faces down. What does it say on the right?
If the Bluetooth icon is in your Status Menu Bar (top right in your screen). Click the icon and make sure Bluetooth is turned on. Then click: Open Bluetooth Preferences and try re-pairing the mouse and keyboard.
Carolyn

Wireless Mouse and Keyboard don't work under bootcamp. Any suggestions?

I installed Windows 7 through Boot Camp. Everything works, but my wireless mouse and keyboard. If I add a wired mouse and keyboard, they work. Have reinstalled Bootcamp a few times, but when I try and add the devices. they are seen, but then can't pair.
Any help would be appreciated.

Well, the 'unplugged' reference was noted earlier and I wasn't sure if you'd get a
better response than a standard suggestion to try the other ideas in this link first
•Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
before actually performing the SMC, that is a dragnet kind of catch-all, sometimes.
All of my keyboard & mouse units are USB and I've gone as far as supplying the
mouse and other peripherals with a powered USB hub; so power from the Mac
isn't spread too thin. The keyboard is one of the only items that should be attached
to the USB port; as it has to work on startup pre-boot keyboard shortcuts... Such
as SafeBoot, PRAM reset, and others where you need a live keyboard and BT
may not be up to the task of being ready. Three going on four of my Macs have
bluetooth capabilities for those items; but I can't justify the continual upkeep cost.
Spare USB keyboards and a few extra mouse are handy as troubleshooting tools, too.
There are some USB keyboard references among search results in this linked page:
https://www.google.com/?gws_rd=ssl#q=Apple+USB+keyboard+troubleshooting
Perhaps the SMC pre-reset suggestions may help resolve the issue, if not, try reset.
Good luck & happy computing!
edited

Wireless mouse and keyboard lag. running no programs.

hello. im having issues with my brand new Microsoft 2000 mouse and keyboard. iam running a brand new week old hp pavilion desktop computer with windows 8.1. i have tried updating drivers and ive tried unplugging and plugging the receiver back in and nothing
seems to help. i have performed multiple scans of my computer with my anti virus and there is no infections detected. The computer had this problem right out of the box.

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support <br/> Read the Subscriptions <a href="http://blogs.msdn.com/msdnsubscriptions">Blog! </a>

Aftermarket mouse and keyboard

Similar Messages

Maybe you are looking for