Aftre using headphone ,no more external sound

aftre using headphone ,no more external sound on my i phone 4S. please help !!!

Have you tried blowing in the headphone jack? I already had some dust stuck in there that made the jack believe headphone were still connected.
Please let know if this works.

Similar Messages

No sound using headphones: mute opti

Sound Blaster Audigy 2 ZS
When I use headphones there is no sound from them, when I use them the sound stops coming from the speakers, if I unplug them the speakers are OK again, I hear sound.
I know this is a feature that mutes the speakers when headphones are plugged in I saw it the first time I installed the driver and software, I've since reinstalled Windows, just yesterday. I can find the program, Creative AudioHQ, for options that lets me choose whether to mute or not mute the speakers when headphones are plugged in but it doesn't help with my situation. Unless there is something I am missing.
The only way to correct this is I suppose is to use System Restore and go back past where I installed the sound card driver.
Any help would be appreciated.

Dhughes,
There are a couple of possible problems here. First, if you haven't already, try another set of headphones in the headphone jack just to eliminate the possibility of the problem being with the headphones.
The next thing to check is going to be the ribbon cable running from the card to the dri've. Make sure this cable is connected and is all the way down. Since the speakers are switching off, this is less likely to be the problem but it should be checked anyway.
If you are using a /4'' to /8'' adaptor, try another one just to eliminate that from the possibilities. Also check to make sure that the headphone volume knob is turned up and that when you turn the knob that the potentiometer is turning.
After all that you already have tried, if the headphones still aren't working after this then most likely you will need to get your platinum dri've repaired. To arrange this you will want to contact support. Their contact information is here:
http://us.creative.com/support/custsup
Jeremy

External sound not working

I think it started after I put headphones in. But I cannot hear ringtones, music, speakerphone, ect. I have obviously checked volume, put in safe mode, took out battery, hard reset, nothing has worked. not much help on the internet either. Sounds like I am going to have to get replacement phone?

I got my Galaxy S4 a week ago and am still trying to learn how to use it. The external sound worked fine then all of a sudden 2 days ago it stopped coming through. SVoice and Robin (voice assistant) don't talk to me, whether Driving Mode is on or off. Klue's message above mentioned the earphones. I did use them once but there's no external sound when the earphones aren't plugged in. (BTW, the earphones don't fit nearly as well as my iPod earphones do. )
I think I probably just hit a button somewhere that turned off the external sound but I can't find what I did. I previously had sound when I was using Wifi and Bluetooth so I don't think that's the problem.
Please help. I wish the User's Manual was more thorough and offered much more info to us than it does. This is my 1st smartphone and need more help than the User's Manual offers.
Thanks.

No sound using headphones only with FC Express

I've searched and read lots of threads on sound problems with USB headsets and 10.4.x but as yet have found no solution.
First I should point out that ALL software including the OS environment works OK with the headset, even if sometimes I have to go to prefs/audio and select and deselect the mute button to get them working. However, with Final Cut Express even this doesn't work.
I hear sound through the external/internal speakers with or without the headphones (USB) plugged in. I have tried front and rear USB sockets and on the keyboard which is where they normally work with everything else.
I am merely trying to play clips from the timeline, but would prefer to use headphones and not the internal speakers.
Final Cut Express HD 3.5 - My settings under view/video output is set to Canvas Playback.
Buying another set with audio jack is not an option that I like. These work fine for everything else so why not with FCE?
Is there anything else I should know or settings I should make? Anyone found a solution yet?
Many thanks

OK, I retract the comment about USB being the "norm"... but not the request to Apple to add USB headphones as an alternative because more and more people are using them.
At least this shows people are reading the thread
Thanks for all your feedback, I'll mark the question as answered.

Satellite U400-11U - no sound when using headphone

Hi everybody .
i has get a Toshiba Satellite U400 (u400-11u) with Vista installed and at the first use all work nice and i have never tried the headphone, but after sometimes, when I put on the connecteur on the jack of headphone there is no sound, only when I put off the connecteur out of jack, the speaker work.
I has learn that I must update my BIOS and I doing it : no solution, there is no sound, so I have change to XP SP3 the some problem and now I'm with Windows 7 with the some problem.
So if you have any information about this problem, please give'it to me !!
I have tried all solution in FAQ, but no way !!
PS : sorry for language mistakes !!

Unfortunately I cannot offer you 100% working solution because I don't have exact the same notebook model but what I can say is that I think BIOS has nothing to with this issue.
It is very interesting that you have tested it with different operating systems and different headphones but the situation is always the same. What can be the problem?
At the end I believe this port is somehow defective. I have three different laptops here on the desk and hear internet radio almost all day. When I use my headset with all three laptops the reaction is always the same. Internal speakers will be disabled and I can hear music on my headset.
Maybe you should contact nearest authorized service provider and ask for help. Let them check the port.
One more thing: when you start notebook for the first time (factory settings) everything must works properly. If you have noticed this issue from that moment I really think there is a hardware problem.

Using External Sound Modules (Synths) in Logic Express?

Hi all,
I don't have Logic Express yet. I want to know if what I want to do is possible before I purchase. It may sound trivial, but I'm very new to the whole DAW environment. Apparently Garageband can't support my external sound modules so I'm hoping Logic Express will.
To help, please see my hardware midi setup diagram here:
http://www.greddin.com/images/My-Midi-Setup.jpg
Will I be able to add tracks that will play the external sound devices like the Wavestation and JD-990? Can you change the sounds through Logic? To what extent can I use my external sound modules?
Thanks all,
-Greg

Hi,
1st: Yes, Logic Express has "external MIDI" tracks that function similar to the "software instrument" tracks but trigger external instruments.
2nd: But: To setup these tracks, especially with more than one device, needs some experience with MIDI, the channels, patch selection via MIDI etc. The real downside is you have to find out which commands you need to "tell" your devices to change sounds and these things. Since there is no standard command for this, you'll have to look it up in your devices manual and use the MSB/LSB Values- which you have to enter manually. However, once you found it out, you can save these things as templates and use them in the future. So yes, it is very possible, but expect some learning curve.
3rd: You can use your sound modules to their full extent. Logic features a mighty MIDI environment setup once you learned how to use it.
Fox

I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Popping / clicking sound when using headphones

I just got a new iMac and I've noticed when using headphones I get this popping or clicking noise at cerain times. If the computer doesn't produce sound for a while, it's like the audio driver "shuts down" and the headphones go very quiet, then when the computer has to make a sound, it makes a "pop" noise before it loads the new sound (regardless of the file or program used). Then I'll leave it for a minute or so, and it "pops" and the headphones go very silent (there was a slight static noise before). I don't get this happening when running the headphones through a USB audio card. Is this normal behaviour for Mac OS?

Looks like this is a software issue (in part at least). By installing this simple script:
http://www.macupdate.com/info.php/id/29024/antipop
you can keep it from happening (more than once). The script keeps the audio system from shutting down, so you only get a pop on startup and that's it. I still don't know if this popping is normal behaviour or points to some faulty hardware.

How do I get more volume when watching a movie and can I use headphones?

How do I get more volume when watching a movie? And can I also use headphones?

Many governments now limit how loud headphones can go. Europe has been plagued with this for many years. Separate amplifiers are available.
I believe volumes should be kept at reasonable levels to avoid hearing loss, but it's not the governments job to protect me.
I prefer Beyerdynamic over Bose Headphones. (They spend a lot less money on advertising.)
http://www.amazon.com/beyerdynamic-DT770-PRO-250-ohm/dp/B0006NL5SM/ref=sr_1_1?s= electronics&ie=UTF8&qid=1308969660&sr=1-1

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?
The sound when I record video is not so good, so I'm trying to use the Bluetooth headphone/microphone to capture a person voice but not know which setting to use.

Hi Robert
Thanks for answering. I didn't know where to post other than the bluetooth forum which is relatively quiet and had no answers forthcoming.
Yes the voice isn't reaching the amp although it is registering on the input bar in the Sound System Prefs, just won't "play through" as it were. I can't see how it could be done I was just hoping someone might see something I am missing.
It seems a shame that you can't do it as iTunes on an old iBook makes a good juke box for DJ'ing and with everything becoming wireless these days it seems sensible that you could cut that one last wire.
Mike

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

Distorted sound using headphones with my iPhone 4

Hello,
I have a strange and very annoing problem that I am currently experiencing with my iPhone 4.
Basically I have a problem where when I insert my Headphones (The Genuine Apple Headphones with Mic) into the iPhone 4, every now and then I hear popping sounds and this also happens when I unplug the Headphones from the phone too. The major problem with this is that when I listen to music the Bass effects seem very distorted, to the point of which you have to turn the music up so loud to fix the problem that it deafens you. If you turn the music down low then all you can hear is a very deep bass kind of sound.
This problem doesnt just happen with music, its with whatever sound I play (whether from a video on YouTube, or saved on my phone, to Music on my iPhone and sounds on the iPhone itself.).
I cant tell if the iPhone speakers themselves are distorted however I dont think they are, I have listened to music through the speakers on the phone and they seem to be all OK, although I havent done any proper testing, this problem only occurs with using Headphones.
I have tried a restore in iTunes and this has not helped. The iPhone is running the latest and greatest system from Apple, in my case as I am writing this it is iOS 5.1.1.
The iPhone has had a service just recently as the iPhone's home button was not working, but it was fine after that. I have not dropped the phone either.
Could you please help me?
Thanks!

Could you clean the connector with cotton swab?I fear there is debris in the connector.
If it is the same,I think it should be open for major repair.

Trying to use headphones to watch a show online... sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

trying to use headphones to watch a show online... sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

trying to do this on a macbook pro...please help

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

Using Airport Express for External speakers and Apple TV. When I'm on MAC computer adn using internet sound from Internet does not go through external speakers. Instead it comes out of Mac computer speaker. Why?

As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.

I have a Macbook pro that I bought in 2008. I recently installed Maverick. For the first time, I used headphones. Now I cannot get sound without them.

I have a Macbook Pro that I bought in 2008. A few months ago I installed OS 10.9.1. A couple of days ago I used headphones for the first time ever. Now I cannot get sound without them. Help?

Hi, lolabev.
You may find the troubleshooting steps in the article below helpful.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Cheers,
Jason H.

Aftre using headphone ,no more external sound

Similar Messages

Maybe you are looking for