AFX 2014.1.1 does not completly close

When I try to close AFX, it is still showing 2 instances of AFX and quicktime still open in Task Manager. I have to manualy close them to be able to reopen AFX. This sometimes happens with Premiere also. The programs will not reopen until I either do this or reboot.

This happens every time I use AFX and once in awhile with Premiere. Mike Daniels
From: Szalam <[email protected]>
To: mike daniels <[email protected]>
Sent: Monday, November 17, 2014 9:44 AM
Subject: AFX 2014.1.1 does not completly close
AFX 2014.1.1 does not completly close
created by Szalam in After Effects - View the full discussionDoes this problem happen frequently? If so, how frequently?How many times in a day do you launch and close After Effects? What about Premiere Pro?I have had this issue happen, but very, very rarely. It may be a Windows issue because I'm also on Windows 7 and it's happened with non-Adobe software too (C4D). If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6937459#6937459 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6937459#6937459 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in After Effects by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Similar Messages

WDA Human Task does not complete/close

Hi experts,
I'm still struggling to flex web dynpro abap and BPM together.
After embedding a wda chip as human task within my process, I face the next problem: The event defined as outport in my wda chip does not close the task when fired from my wda component controller. The page isn't affected by the event at all, the task is not completed. I debugged the wda method and found it throwing the event as expected.
Since the wda page is opened as expected and shows the data mapped via Input Mapping I think the chip and system landscape definition (done via the portal system administration) are correct.
Any clues on this? What am I missing?
Thanks and kind regards,
Helmut

Hello Abhilash,
thanks for your answer!
I created the event (wih one parameter) in the WDA componnt controller and the component interface and made sure it is thrown correctly (I checked it via debugger).
In the Chip I created an Outbound port (again with the parameter) and tagged it as CHIP_CONTRACT:PROCESS_STEP_END_POINT.
On the consuming side I did nothing special with the outbound event but mapping it's output to my process context.
Kind regards
Helmut

Elements 11 does not completely close down in Windows

I'm running Windows 7 64 bit.
I have the Trial version of Elements 11 running and will be buying it at end of the trial.
However, when I close out of the program, there are pieces of it still running in the background. When I start up task manager and go into processes, I see parts of elements 11 still running in the background.
Normally, I wouldn't worry about it but when I go back in and try to launch the program again, it hangs up. I either have to restart my computer or go into task manager and try to close the Photoshop Elements processes.
Any ideas?

Please stop the following processes from task manager, if running-
photoshopelementsorganizer.exe
photoshopelementseditor.exe
elementsautoanalyzer.exe
dynamiclinkmanager.exe
photoshop file agent
photoshop server
Now launch Organizer directly from its exe in C:\program files or program files(x86)\adobe\elements organizer 11.0\photoshopelementsorganizer.exe by right clicking on it >> run as admin.
1. Once Organizer launches, you can turn off the background processes from Edit >> Pref >> Media analysis.
2. Also, if you don't use Watch Folders, you can remove any watched folder from File >> Watch Folder.
Thanks
Andaleeb

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
Any solution?? Need help, please!!
Macbook pro 13 i7
Iphone 4
Ipad 2
Thanks!!!

Premiere Pro 1.5 does not complete DVD burn

I have Premiere Pro 1.5 installed on a laptop running Vista Business. It is a Sony VGN-Z laptop with the following specs:
Operating System
                        MS Windows Vista Business 64-bit SP2
CPU
                        Intel Mobile Core 2 Duo P9700 @ 2.80GHz
                        Penryn 45nm Technology
RAM
                        4.0GB Dual-Channel DDR3 @ 531MHz (7-7-7-20)
Motherboard
                        Sony Corporation VAIO (N/A)
Graphics
                        Nvidia Defaul @ 1600x900
                        256MB GeForce 9300M GS (Sony)   47 °C
Hard Drives
                        313GB Hitachi Hitachi HTS723232L9SA60 (IDE)
                        Ricoh Memory Stick Disk Device (IDE)
                        Ricoh SD/MMC Disk Device (IDE)
Optical Drives
                        MATSHITA BD-MLT UJ232AS
Audio
                        Realtek High Definition Audio
I always turn off all other applications including virus software, disconnect from the internet, and set the laptop power to max performance which does not let the laptop go to sleep and so on.
So far I have only used it to create DVDs from clips uploaded from Mini DV tape recorded on a Sony HC-96 camcorder. The only problem I have encountered is that the burn to disc does not complete. There are no errors or other messages when this happens. The burned disc will play on the Sony laptop in media player, but not play on any other PC or DVD player.
If I then make a “copy” of the disc to a blank DVD+R disc, the copy of the DVD plays fine on other PCs and DVD players. It seems that the original disc created does not close properly.
Does anyone have any suggestions how to solve this?

First, some reading
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116
Second, tell PPro to create an ISO on your hard drive, use the FREE http://www.imgburn.com/ http://www.imgburn.com/index.php?act=download to write to disc... at the slowest speed possible

I upgraded iphone 4s to iOS6. Now phone just keeps rebooting with the apple sign showing on a black screen. It does not completely start up.

I upgraded iphone 4s to iOS6. Now phone just keeps rebooting with the apple sign showing on a black screen. It does not completely start up.

Hi Lisa 1952,
What have you done so far to try to fix it? I've tried rebooting several times and it did not work. Tried connecting to iTines but it does not recognize the iPhone.
My other iPhone 4s restarted successfully after the updgrade but some apps don't function properly. It automatically closes while in use.
Apple please help. I know it's the weekend but I need the other iPhone to work. Can't use sim with a diffrent phone because it's a micro sim!

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

So my Ipod touch hasn't been connecting to computer, or charging for a week or two until i turn it off completely and now i try to reset all content and setting, the circle goes round and round for like hrs(24) and it still does not complete the reset

so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
pls pls pls pls help .
i have tried alot of solutions, but non of them have worked.

Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it.

After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
     a. iTunes
     b. QuickTime
     c. Apple Software Update
     d. Apple Mobile Devices Support
     e. Bonjour
     f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC

Visual Approval Action does not complete

Hello,
I am using Visual Approval Callable Object in my Application but when the approver goes into the workitem to approve it ...the action does not complete and he gets the following message...on clicking on Approve/Reject button:
"Cannot complete action: The activity could not be read"
When I test the CO in designtime ...it works fine....and i have used visual approval CO at other places also....it works fine there...only at this one it gives an issue...i tried recreating it ....and also tried to put in a different block...but still comes with the same error....
Any help would be highly appreciated...
Regards,
Anil

George,
Thanks for the reply....I have checked the parameter mapping and the email address is also setup which is passed as a Context parameter for the Action processor ...but still gives the same error....
Please help.

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

I can't get iWeb started. It does not complete the starting procedure

I can;t start iWeb. It does not complete the startup procedure, and then becomes frozen. I've installediWeb 3.04, but same results. What can I do?

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
Happy New Year

When I try to sync my iPod iCal with my MBP iCal via WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete"

When I try to sync my iPod iCal with my MBP (OS 10.7) iCal via iTunes and WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete because the downloading never completes because I am not connected to the internet.
Why does syncing iCal need Safari Safe Browsing Data? How can I turn this off?

See:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
"Safari Downloading Safe Browsing Data" is just some data that is synce with the computer. To turn off on the Mac go to System Preferencs>iCloud and turn off Safari

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

HT1222 Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

Restore as New (no backup)... then Re-Sync your Content.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

AFX 2014.1.1 does not completly close

Similar Messages

Maybe you are looking for