AFX wont load on Mac OSX 10.9.2

Ok - I'm on the new black trash can - 3.5 ghz - 6 core intel xeon E5
Premiere opens and runs no proeblems, but AFX wont open an gives the warning - you cant use this verision of AFX 0S 6 on this version of OSX
Is there any easy way to fix without going backwards, in op systems?
Cheers for any help!

It is as Rick says:
http://blogs.adobe.com/aftereffects/2013/10/after-effects-cc-12-0-1-update-fixes-crash-on- mac-os-x-v10-9-mavericks.html

Similar Messages

Illustrator CS6 wont open, stops at loading fonts - MAC OSX

I have a MAC OSX 10.8.5. My Illustrator CS6 wont open anymore. It keeps stalling while loading the fonts. I have uninstalled and re-installed the program twice and also tried deleting the font that it stalled at but then it would just stall when trying to load the next font. I did notice that it seemed to be stalling on fonts that AREN'T OTF format. I also wasn't sure to delete the fonts out of the SYSTEM, LIBRARY, FONTS folder or the other fonts folder location in LIBRARY. I really need to get this program working, please help!!!!!

thank you, already did that

Macbook has Grey screen wont start- said " MAC OSX does not have enough memory "

My daughter was using the macbook, and a message came up saying something like MAC OSX does not have enough memory for start up applications, ...
and it was frozen ( wish I had written down what it said") In held the start button down for 10 seconds, and now it wont work properly.
All I get on start up is a grey screen. I have tried holding down shift key and rebooting, but nothing.
I tried resetting the Pram or whatever it is.
I cant try and start from the start up utility disc as there is already a disc in there and I cant get it out.
Have tried rebooting with mouse key pressed., have tried rebooting holding F12, rebooting holding command O and P , have tried pushing the ejectb button when rebooting. But nada.
Ipod died last week, video camera on the blink yesterday, am having a bad electronic week!!!
Has it died or is there another solution..Help please.

Wow, sorry to hear!
Does it boot into any of these modes?
Target mode...
http://support.apple.com/kb/HT1661
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Does booting with the Option/alt key held down show any boot choices or work at all?

Mac Book wont reboot after Mac OSX update

Was doing a regular update and a MAC OSX update was included among many others. After doing it, my macbook will not rebot and just remains in the loading stage. Any suggestion on how to get it working again..._*Need Help Desperately*_ - my son has some papers on it that is neede within next week.

cheechy! wrote:
Hi Everyone,
It is a macbook not ibook, sorry my mistake.
I did not know it would be breaking or violating anything, if so I apologise!!
I will obviously need to buy the software specifically for my macbook is the answer, thank you for all your answers.
If i buy the software do I still have to ask for macbook or is the retail version for any mac machine?
Sorry - I wasn't trying to be harsh. The software on the restore discs is licensed (or should I say licenced) for use on one computer. I think a lot of people might dispose of or sell them after their machines expire or they upgrade to a newer version of OSX.
This gets really complicated.
There are currently 6 different iterations (all the machines at the same issue date should use the same install version) of the polycarbonate shell MacBook. Each one would require a different set of install discs. Several of these came out before Leopard (10.5) was on the market and the install discs have Tiger (10.4.X). If your machine was of a vintage before Leopard was on the market, you can install using any retail version of Leopard. I have a copy of Leopard with the original 10.5.0 version. The current retail version of Leopard is 10.5.6. This should install on any MacBook which came standard with any version before 10.5.6.
Are you confused enough now?
If you could identify which iternation of MacBook you have, I think people here could give you a better idea of what your options are for installation of the operating system. You could put your old drive back in, run System Profiler and find out which MacBook version you have. Mine says MacBook 3,1. My guess is that any retail version of Leopard should work since you identified your OS as 10.4.11.

SQL developer wont start on Mac OSX Lion

Hi there,
hoping someone can help me with this one, I've been running SQL Developer 3 on the macbook no problems for about a year, I recently upgraded to Mac OSX Lion and now when I try to start SQL Developer it will not run.
I have downloaded and installed the latest version of java as directed on the SQL Developer download page.
When I start SQL developer and view the Activity Monitor the "bash" process starts to use 100% CPU very quickly and SQL developer does not even get to the splash screen.
Can anyone point me in the right direction in terms of diagnosing this issue? Is there a log file I can review or way of starting SQL developer with specific arguments?
Kind regards,
stu

Irian wrote:
Usually the SetJavaHome points to the root directory for the JVM installation, this directory in your case appears to be
/Library/Java/JavaVirtualMachines/1.6.0_26-b03-383.jdk/Contents/Home
so try setting this in the SetJavaHome command for your SQL Developer (the bin folder will be added internally)
I'm not completely sure as i do not use macs, but it's worth a try.
Just had this same problem with Mountain Lion/SQL Developer 3.2.2, right after my upgrade to Mountain Lion. The path shown in Irian's response is what did the trick for me. The /System/Library/.... path shown by some others doesn't even exist on my machine. Interesting....
Earl

Iphone4 wont sync with mac osx

my i phone 4 will not sync with my mac osx 10.5.8 after latest update was installed on the phone

It isn't possible to sync a device running iOS 7 or newer from Mac OS X 10.5.8, or to downgrade the device's iOS version.
(104954)

Facebook wont load on mac book pro

looking for a little help. i can load facebook from my phone, ipad, ipad mini and my i mac. the i mac doesnt have mountainlion. but the mac pro that is running mtn lion will no longer load the http. worked fine a coulpe weeks ago. help!!

Have you tried to load facebook.com from a secondary browser like Chrome or Firefox? If it does not work in another browser then it may be a security issue.

Photoshop Cloud Not Loading on Mac OSX 10.8.2

The manager download and said that it installed the app. The app is listed in the applications folder but the icon for the app is whited out with a circle and a line thru it. When I try to load it it just says " Can't Load.. May be damaged or incomplete." Need to get this up and running ASAP as I'm already paying for it and have jobs waiting.
Thank you.

Mikey do you receive this message when opening Photoshop CS6 from the Applications folder? If so then please uninstall using the Uninstaller located in the Applications/Utilities/Adobe Installers folder. You should then be able to reinstall through the Adobe Application Manager.
If you continue to face difficulties then I would recommend reviewing your installation logs to determine what errors maybe occurring during the install process. You can find details on how to locate and interpret your installation log files at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

Photosmart c5550 all in one- wont communicate with mac osx 10

Hey all, just downloaded the driver from hp website and went through all setup instructions, but when i go to print something there is no communication between my printer and my mac. I click on the qeue box and it says the status has been stopped. I click to resume, then the status goes blank as if it is trying to do something, however, it quickly returns to stopped. A box comes very rapidly and says failed, then disappears quickly.
Hmmm.... Any thoughts?

Print a WIreless Network Test from the front of the printer. It will self-test the printer's radio.
Can you give me the exact model number of your router? If it is a 802.11b router, it may be time for a new one. If it is, are you sure you are using WPA and not WEP?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HELP! PRINTER WONT PRINT d1320 . mac osx 10.41

okay ive goen over every trouble shooting steps and still nothing,the delete ,hold ,
and utitys are gray out and dont work
everything is plug in and appears to be fine,everytime i trie and print , ends up in
the completed file but the printer dosen make a sound, i stop useing this printer
for a few months , could it be the ink is dryed out ?
any info would really help

Let's reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
If that does not work, get the latest software for your printer from the "Support & Drivers" link at the top of this page and re-install.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Mac OSX will not boot, when I log in, it shuts down after grey screen and grey loading bar show up: PLEASE HELP (:

So here is a lowdown on my problem.
I start my mac OSX, I hold down the alt/option key and load my MAC osx drive (which is the only drive available; however, when i do not hold down the alt/option key it will go to a black screen that says "no bootable device, press a key when device inserted"). Continuing, it then goes to my login screen where I have my username, and I can enter my password like usual. I enter my password, hit the enter button (like I always do), and this is where my problem begins.
After I enter my login and hit enter, the screen goes grey, with a little apple symbol in the middle and a different shade of grey loading bar underneath. This grey loading bar shows up for about 10 seconds, fills up about 10-20 percent, and then shuts my computer down.
No matter what I do, this process repeats over and over, and heres where the problem gets worse, and this part is VERY IMPORTANT and is the most depressing, stressful part of the process.
NONE of the startup/boot commands work except holding the alt/option key. I can't hold: Command plus r; command pr to reset PRAM; shift to enter safe mode.
I really dont know what to do here :/. I have files that I want on the hard drive, that are pretty important but not critical. I gave up on wanting the files back but now I want to simply WIPE my computer and re-install a clean version of OSX onto the computer, but I CANNOT GET TO THE REINSTALLER :(.
More information that may be helpful:
          I do have a partition on the HDD that I was going to use for Bootcamp, but it does not have anything installed on it (thus causing the "no bootable device" screen to load, and probably causing the boot commands not to work).
          My version of Mac OSX is 10.8.4. "MBP 15.4/2.8/16GB/768 flash"
          The last time I restarted my computer, my mac OSX RAM was down to 1.75 GB, with nothing open. Usually when nothing is open the free RAM is around 10-13 GB (I know this because I have the activity monitor always open, and I use my computer a lot).
          Again, boot commands will not work, except for holding the alt/option key.
So if anyone can help me fix my problem(s), which are:
1: using boot commands; 2: reinstalling mac OSX; or 3: getting my files,
I would love you forever. I would really prefer 1 or 2. Thanks for reading this.

Oh and one more thing, I do not have a disc drive in the mac osx. The version I have comes without one.
I am very puzzled about what to do right now.

Buy a old version of Mac OSX for my PB G4 1,33??

I have a old Power Book G4 1,33 Ghz on Mac OSX 10.3 and I wont to update Mac OSX to the best OSX possible on that G4. I think it can run OSX 10.5 right? But the problem is where can I buy it?

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

Map Loader Can't Load maps to 5230 on Mac OSX

When I start Nokia Map Loader application for dowloading maps on Nokia 5230 I get an error message saying :
The following errors occured while transferring files. If the error is not permanent, you can try starting the file transfers again.
config.cfg file couldn't been found. operation forbidden
config.cfg file couldn't been found. operation forbidden
I can't download maps on the phone because the region list is empty (it is not supposed to be).
This happens every time I try to use the Map Loader.There are screenshots of the same problem on another forum: http://betalabs.nokia.com/apps/nokia-map-loader-fo r-mac/bugreport/configcfg-operation-forbidden
Operating system is Mac OSX
Thank you for your help.

Hi all my experience with map loader is similar and I'm hoping for dramatic improvements to enable me to successfully load maps to my 5800MX, apols for the length of my post but I have just spent 12 hours trying to get MAP loader to work and have found and fixed a number of issues that I hope will help some people, I have also found a no of shortcomings in the software and am hoping for Nokia to take note and apply some fixes.
1. I got rid of the config.cfg error message by loading maps on my phone and changing the memory card location to drive E: I then waited for a satellite connection and found location, then connected to my MacAir running 10.6.4 OSX. Prior to running maps on my 5800 I had the config.cfg errors.
2. BEWARE that if you are connecting a phone that has not been synced using nokia MMT before or one that was previously synced but had the music etc deleted (like my 5800 because I formatted the memory card) then initially the NMMT symbol flashes as if it is working, BUT shortly after it will remain static and then the color wheel will appear when you float the mouse over the NMMT icon, this can give the impression of a complete software lock upand in my case only after 2 forced quits and reboots not altering things I decided to leave the MAC in this state , low and behold some 40mins later NMMT started showing a status of music and photo transfer . SO NOKIA please fix this your software appears to be totally hung but it is merely working so something needs resolution in my view as there really is no indication that the software is running and in "force quit" the software shows as not responding.
3. MAP LOADER, - initially upon loading map loader it reported "phone cannot have maps or is not compatible" however this was because my default memory card (on the 5800 maps, settings ,maps, menu) was C: and I had not actually re-run maps after formatting my memory card (see note 1 and 2) . Changing the default memory location in maps on the phone to E: allowed map loader to run. Then I had an issue that the map regions were not showing in the left column, the software simply showed nothing and I had nothing to drag into my phone for upload. This was resolved by getting a faster internet connection. Internet Speed and Reliability - Now (still not resolved) I have a faster internet connection I have loaded MAP loader and have dragged all of the relevant maps to the right. I click on upload/download maps and the software stars the download process but takes an eternity to download maps, last night I left the software for 7 hours and still no maps were downloaded, In addition to this I have to leave my phone connected to my MACAIR the whole time I am attempting to download, so I can't even download maps from nokia and upload them to my phone at a later date. I think this is due to my internet connection speed but I am using bittorrent to frequently download torrents which works fine so it cannot be that bad. So MY REQUEST to NOKIA software development for MAP LOADER is can we please have some software that is designed to run on an internet connection that is less than 500K (it looks like you developed it on a 1GB LAN connection). IE why do I have to connect my phone for MAP loader to start in the first place OR Can't you put an option in the SW to allow the Nokia phone to be disconnected after downloading commences (ie if this is a licensing issue) so I can freely use my phone whilst maps are downloaded on my MACBOOK when Im not in the office ? Could you employ a capability like bittorrent in the downloader so we can download in portions when we have access to the internet ? Why is your MAP loader so slow ? IE I happily download 100M updates to MACOSX and ITUNES over these internet connections but MAP LOADER just WONT WORK, OR works so slowly and cannot recover from slow internet connection states that it is unusable ?
4. As I have a MACAIR I only have one USB port so was hoping to connect my 5800 with Bluetooth so I can run maploader whist I am connected to my USB mobile internet. Unfortunately I was unable to get the MAP loader to recognize my 5800 via bluetooth , I loaded the software , chose use bluetooth and it continually searched with no connection found. This is despite me having the devices paired, I have used bluetooth connections for both isnc (calendar and contacts sync works fine) and for NMMT. NMMT recognized the 5800 bluetooth connection in the dropdown menu but MAP LOADER completely failed to recognize it. NOKIA please allow a BT connection with the nokia 5800 so I can run this combination, OR simply allow me to disconnect my phone whilst I am on the internet downloading my maps, then once maps are on my local MACdrive I can just disconnect from the internet and uploads maps to my phone.
That's it, in short MAP Loader for MACOSX 10.6.4 seems unworkable in its current form unless your connected to an 8M internet connection or the Nokia development LAN. Please fix ASAP

Wont load OSX after downloading 10.4.10 pop up

Apparently this is a very common problem and not under warranty. I found the perfect forum for this but then lost it so here's my own...
Basically when i turn on my ibook it gets to the OSX window and sinply wont load. I have to take the battery out to turn it off! Should i try starting up in target mode? should i try reinstalling OSX? My local mac dealer says lots of others have the same problem and its not under warranty. Does anyone else know of anything that could work and save us all a few quid?
thanks anyone who can help

try running as administrator -- a temp solution for me anyway. Waiting for apple to fix whatever this is. At least one other poster here had same problem and "solution" worked for him as well.

I have a mac osx 10.411G4 powre pc and recently I down loaded excel for mac 2004 the problem that iam having is that the two other programs i downloaded one program it says unable to read the dictionary of the application of the extension because it is no

I have a mac osx 10.411 power pc and recently i downloaded excel for mac 2004 so that i could download some program that only would work if i have excel for mac but what happen was it went to script and said that unable to read the dictionary of the application of the extension because it is not scriptable and the second pop up said the document autorun,inf could not open script editor can not open files in script editor app can any one help me how do i get these program working thank you norro460

good afternoon Limnos i think i didnt give the right info I didnt download well in a way i did i bought a copy of microsoft excel for mac 2004 i loaded on to my mac then i went and down loaded some software that said i needed to have excel you see my mac is osx 10.4,11 power pc G4 and that is were i had the problem now the excell loaded allright but the the other programs did not the pop ups say it is not scriptable or can not read dictionary if you can help m,e iam not great with computers but i along

AFX wont load on Mac OSX 10.9.2

Similar Messages

Maybe you are looking for