Again, cannot start multiple domains at the same time

Because the original question is marked as answered and the problem persists, I need to submit it again:
With the latest plugin, in Glassfish Kepler, when I try to start the second server (same Glassfish, different domain) - it'll simply not start (the console remains empty) and after a while I get the time-out message, that the server could not be started. Even if 2 Eclipses are started, there only one server at a time can be started.
This is a major issue for me, can you please help? Is there a lock file that I can delete or another workaround?

Hi. The weird thing is that after the last update it worked for me, too, for a while - but then it didn't. I think there may be some sort of lock that hasn't been released when a forced shut down happened...?
If I start the servers either outside of eclipse (command line), or using eclipse's external tools (which is pretty much the same, I think), they work just fine. And the status in the servers view gets updated to either started/stopped, correctly.
And also, the case when I create domains/start servers outside of eclipse and then create the server in the servers view, the status update works.
So yes, if there are multiple domains started at the same time outside of eclipse, the plugin shows them, but it cannot start them itself.
Eclipse GlassFish Tools
Part of Oracle Enterprise Pack for Eclipse 12.1.2.1 - version 6.2.0.201307232054
Glassfish
Installed Version:
Oracle GlassFish Server 3.1.2.2 (build 5)

Similar Messages

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

I cannot select multiple contact at the same time for e-mail sending

Please suggest that, how to select multi contacs at one time.

alexanderforce wrote:
I used to highlight several Genres at once and hit shuffle, playing all of them. The new iTunes won't let me!
Alexander, On my machine it works as follows in iTunes 11:
Enable column browser from the View menu. In the Genres column of the browser, use CTRL-click (in the Mac I think that is Option-click but if it doesn't work, try CMD-click) to select the Genres you want. Also activate Shuffle (crossed arrows, or via the Controls menu). Start playing, and it will shuffle through the songs of the selected Genres.

Events cannot have multiple exceptions for the same date

I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
I didn't find the answer on these forums but did find it on this thread on Google:
http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
Here's the important excerpt:
"I had a client, who just had this same issue, nothing to do with Google cals.
It was apparently, in my best guess, a corruption of the subscribed cal.
*I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

Lightroom CC issues with multiple export at the same time

Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are started

Re: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages.

How can I install one app on multiple iPads at the same time?

We have a volume purchasing account, but when purchasing an app we get multiple serial numbers that all seem to need to be entered individually. The iPhone config Utility will not sync multiple iPads at the same time. Am I missing something? This cannot be the method for mass deployment, it seem too complicated.

You can do a backup of you iPad then restore the backup to many devices.
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
Mobile Device Management Solutions for iOS
http://www.apple.com/iphone/business/integration/mdm/
http://www.apple.com/ipad/business/resources/
"iOS mobile device management (MDM)
With an unmatched breadth of features, a Self Service console forover-the-air (OTA) distribution of in-house and app store apps, and integration with Apple's Volume Purchase Plan (VPP), the Casper Suiteallows administrators to easily achieve the four major tenets of iOSmobile device management: Inventory, Configuration, Security Management, and App Distribution."
http://jamfsoftware.com/products/casper-suite/

How does iCal, or Calendar, order the display of multiple events for the same time?

I can't for the life of me figure out how iCal orders the display of multiple items at the same time. Does anyone have a clue? It's not alphabetical. It's not according the the order of the calendars in the left pane. Is it just random? Any help would be greatly appreciated.

In the focus lost eventhandling start a thread which does
the actual handling.
the new thread waits for a little time (0.1 seconds)
the click event of the button checks for a thread like the one above and tells it not to execute
This way you execute the for the lost focus event only if
the ok button isn't clicked in the same process ... not
realy good, because it kind of relies on the ordering of threads ... but maybe it still works for you?

Can I export multiple folders at the same time, keeping the album structure

I'm exporting all of my photos from 2010 so far. Is there a way to export multiple folders at the same time, while keeping the existing album structure? It seems that when I try it, iPhoto exports them all to the same folder.
I really don't want to do this one album at a time, and here's why -
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.

Check out [iPhotoToDisk|http://www.iphototodisk.com/index.html]
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.
Why not upload to Walmart from iPhoto? Check out the first option here:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Cannot open two pictures at the same time - computer crashes

I have PSE7 and Windows7. I cannot open two pictures at the same time. When I go to open the second picture it crashes PSE7. Anyone know how I can open two pictures at the same time? What is the fix?

Hello Shawbrah
Thanks for your reply.
Yes, your method is actually the only workaround for a workplace with PSE7, but it isn't a solution for our enterprise network/domain.
There are different problems:
We have several computers with PSE7 installed. It does not make sense to manually install a local TCP/IP-printer on each PC.
We have many fluctuation in our company which means that the workplaces will often be moved and the PCs will often be replaced.
If the employees are printing over a local printer, our centralized printer monitor solution does not recognise print volumes.
The printers which are defined on our print server have special tray settings and these settings are "linked" to the core business application. Users should not be able to print with other settings, this could end in a chaos.
Finally to work with PSE in our company, there is no other way than upgrade to PSE8...
-Nicolas

Is it possible to upload multiple files at the same time?

Hi folks,
It seems pretty trivial to implement a file upload item, but is there some way to allow selection (upload) of multiple files at the same time? Seems like this has probably come up before, but I didn't find much for solutions in my search. Any links or insight would be appreciated.
Thanks!
-Adam vonNieda

Thank you both for your replies.
@Manish - That does allow for multiple file uploads without refreshing the page, but does not allow for multiple file uploads at the same time.
@Tony - That might be the way I end up going, although I probably should have been more specific. It would be really nice it there was a way to do a mutli-file select using the control or shift button like you can with a standard file selection dialog (if you want to copy multiple files, for example). Having a separate line for each file browser means there has to be a limit on the number that can be selected at the same time.
Has anyone implemented a method of selecting multiple files at once, and hitting an upload button once to get them into the database?
Thanks again Manish and Tony, very helpful.
-Adam

Can't start two listeners at the same time

Hello -
I am running Oracle 10g R2 on Solaris 10. I am getting the following error when I try to start my second listener "TNS-01106: Listener using listener name ccn_listener has already been started". There are multiple VIPA's assigned to the server, so I am trying to start two listeners at the same time (I can start each one separately). The different IP's are referenced in the listeners (even though they use port 1521), so there should not be a conflict. I also gave the two listeners distinct non-default names. The listeners are running under two differenct Oracle homes.
Here is the code of the listeners:
listener 1:
PHD_LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.49.236.119)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_PHD_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u02/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME=phdv410g)
(ORACLE_HOME = /u02/app/oracle/product/10.2.0/db_1)
(SID_NAME = phdv410g)
listener 2:
CCN_LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.49.236.131)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_CCN_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME=ccn10gt1)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(SID_NAME = ccn10gt1)
If anyone has any ideas about why I can't start these two listeners togethers, I would really appreciate it.
Thanks!

Hi,
Look at the error: "Listener already started"...
Can you check if that is right ?
ps -ef | egrep lsnrWaiting for feedback.
Regards,
Yoann.

If you buy a film from itunes, can you watch it on multiple iPads at the same time?

if you buy a film from itunes, can you watch it on multiple iPads at the same time?

SerZak is correct. There is a ten device limit. Yoy would still have to be signed into the correct ID in order to sync the Movie, even if you do not use Automatic Downloads, so the 10 device limit would still apply.
Your Apple ID can have up to 10 devices and computers (combined) associated with it. Each computer must also beauthorized using the same Apple ID. Once a device or computer is associated with your Apple ID, you cannot associate that device or computer with another Apple ID for 90 days. You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
http://support.apple.com/kb/ht4627

Can you use sync on multiple computers at the same time? ie have someone else logged into your firefox account for you whilst you are also logged in

I am trying to sign up to something but there is only a short window so was going to ask a friend to sign in at the same time using my account to try to sign up (with my password being saved into my firefox account)

Hi. Yes, you can use Sync on multiple devices at the same time. I use it to keep my bookmarks in sync across my desktop and Android versions of Firefox.

Is there a way to delete multiple pictures at the same time from the iphone4s?

Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

CRVS2010 - open multiple rpts at the same time, like sheets in a xls file ?

Hi all,
is that possible to open multiple reports at the same time, like sheets in a excell file ?
Is that possible create tabs beside the MainReport tab ? or include reports in the Group Tree ? how can I do it ?
The application is in asp.net with VS2010 and CR2010.
The reports used to be in excell with three sheets and now we are migrating them to crystal reports, how can I create the report with those three sheets ?
thanks !
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Aug 31, 2010 7:33 AM

I'll make the suggestion to the Program Management group.
You may want to do a post to the [Crystal Reports Design|SAP Crystal Reports; forum and ask them how they's fake that sort of a requirement. E.g.; there may be some way to make this report look the way you want, but it will be best to ask the experts. Don't mention CRVS2010 as they don't support it and most likely you will not get an answer.
Ludek

Again, cannot start multiple domains at the same time

Similar Messages

Maybe you are looking for