Again Error -8

Hi There,
I have noticed that already few people experienced connection problem in terms of error -8. I am getting the same kind of error and I will be appreciated if someone will finally resolve this issue. I am posting link where you can download my recent log with that error, which hopefully help establish source of it.
http://homepage.mac.com/p.reut/FileSharing29.html
Any suggestions are welcome.
Thank you

HI Peter,
Long time no hear.
Video Conference Error Report:
6.006762 @:0 type=4 (00000000/22)
[VCSIP_INVITEERROR]
[19]
6.006601 @SIP/SIP.c:2437 type=4 (900A0015/22)
[SIPConnectIPPort failed]
4.005475 @SIP/SIP.c:2437 type=4 (900A0015/22)
[SIPConnectIPPort failed]
2.003872 @SIP/SIP.c:2437 type=4 (900A0015/22)
[SIPConnectIPPort failed]
This this the important bit.
It implies that the SIP part of iChat is not connecting.
This could be because port 5060 is not open somewhere.
It could be that port 5060 can not hand over to ports 16384-16403
It could be that one of the ISPs of you or your Buddy is using port 5060 for a VoIP service.
There is a chance one of you is using an SIP aware modem that needs SIP unbinding from port 5060.
10:01 PM Sunday; July 2, 2006

Similar Messages

  • Apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

    apple application was not found, apple application support is required to run ituneshelper. please uninstall itunes and install itunes again error 2. What does this mean?

    You can try installing 7-Zip (free), then right-click on the iTunesSetup.exe or iTunesSetup64.exe file to unpack its contents, and install AppleApplicationSupport.msi as a standalone component. It may still not install successfully, but if it doesn't you may get a more useful error message regarding the reason why.
    See also Troubleshooting issues with iTunes for Windows updates.
    tt2

  • When I try to iTunes Match I get 'Please Sign In Again' error, I cannot access the songs which are visible in the iCloud in my music library on both iPad and iPhone

    when I try to iTunes Match I get 'Please Sign In Again' error, I cannot access the songs which are visible in the iCloud in my music library on both iPad and iPhone

    Did you try setting itunes to run with administrator privileges? 
    Since I changed that I no longer have this issue

  • TS3694 i was doing update on my apple iphone 3g 8gb during update an error ocured namely 1015. and when i was doing restoration of my previous software version once again error ocured namely 1015

    i was doing update on my apple iphone 3g 8gb during update an error ocured namely 1015. and when i was doing restoration of my previous software version once again error ocured namely 1015.
    and 2nd i have downloaded few free apps like face book twitter etc on my itunes but when iam installing them to my iphone its not installing i dont know why plz help me to install them thanks

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    Maybe you phone has been jailbroken

  • TS2446 Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card an

    Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card and the same.why???????

    I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
    What happened is that my garage band looks like it will open then it shuts down.
    I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
    Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
    I really hope I don't have to erase it.
    It'll say it's ,lading my songs then it shuts down .
    If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
    Thank you
    Simachyahi

  • "Signing failed, please try again" error

    I've got a perplexing and frustrating problem. My app is already to go, I've downloaded the .ipa file and tested it. It works fine on the iPad. But, when it came time to create the distribution app (.zip) file, I keep getting a "signing failed, please try again" error.
    I've tried but failed the following:
    -I've checked my p12 certificates. They were valid. I even recreated them twice, each time it did not work.
    -I've rebuilt my folio twice. I even tried deleting all but one article then trying to export the distribution app
    -I've renamed the article names to just alphabets and numbers, no special characters
    Yet despite all of my efforts I keep getting this error. What am I missing?
    Thanks!
    Pai

    No. We're going to need to get log files from you to determine what is going wrong. To get log files you need to create an empty text file. on your machine. You can create the file using TextEdit, just open TextEdit, make a new document, go to the Format menu and select "Make Plain Text" and save it to /Users/username/AppBuilderLoggingEnabled.cfg.
    Then run App Builder again to get the error. After you get the error look in /Users/username/ for a file called appbuilder.log and send it to me at [email protected]
    Thanks,
    Neil

  • HT201210 iphone2 been unlocked not by network supplier and now cannot be restored and says is on error. iphon says conect to itunes and again error like magic circle;)) any ideas?

    iphone2 been unlocked not by network supplier and now cannot be restored and says is on error. iphon says conect to itunes and again error like magic circle;)) any ideas?

    Sounds like that phone was unlocked by hacking or jailbreaking , maybe the reason why you are unable to restore your phone.
    what does the error message say.

  • I keep getting "The MSN Toolbar has encountered an error. Please close all browser windows and start the browser again(Error code: 400)"

    This error pops ups after I have mozilla loaded for a few minutes.

    I tried installing (again) Premier Elements this morning after starting up my Win 7 PC. I did install some Windows (optional) updates and deleted several files suggested in "troubleshoot" when I got the same error mesage. The files/folders I deleteed before trying the install again are Cache, PDAppFlex.swf, and PDAppFlex-app.xml.
    This lastest installation attempt resulted in the name error message I have gotten a dozen times, "The installation has encountered an error while installing. Please restart system and try again". The hangup always occurrs around the same spot while installing shared technologies. Maybe this info helps?

  • I have an Ipod Classic, one day he appears without music, now that i want to sync with my itunes an error occur. I download all the new itunes version and ipod software but again error. How do I make it work?

    My ipod classic, have these problem:
    One day I find out that all the music was completely gone, I always charged the ipod on Ihome.
    So, I connect the ipod to my computer to sync the music, but mi computer recognize the ipod as a memory device. so delete itunes from my computer, following some support guides that i found in the mac support web. Again, it didnt work. The itunes doesnt detect it.
    then I try to sync on a macbook, then it told it was corrupted i should restore th ipod, i try it but this could not be done... cause an error occur.
    How I can restore my ipod...

    Does both your Windows and Macbook iTunes have the same library of songs?
    if it  does then, much easier to proceed, else try to load the Macbook with the same library as Windows.
    Note that only one of the Macbook USB port is good for iPod Classic, the other is too slow and may cause timeout, and I would suggest disconnect all other USB devices, while you Restore or Sync the iPod Classic.
    Connect the iPod to the Mac, (if iTunes launch, please close it back.)
    Use Disk Utility -> select the iPod Device->First Aid->Repair (use option FAT32)
    After the Repair complete, eject the iPod.
    Connect back to the Mac
    When iTunes launch, Restore the iPod when Prompted, (use FAT32)
    Sync your library.
    Good Luck!

  • I have Windows 8 on a Dell laptop, i upgraded to 8.1 When i download iTunes, when i click finish, awindow pops up that says," Application support not found, uninstall iTunes and download again,Error 2" After 3times,it still says same thing.

    Hello Community, I hope ya'll can help me. I have a Dell Laptop with a 32-bit Operating System, running Windows 8 with Media Center. I Upgraded to Windows 8.1 recently. Some of my Apps I had with Win. 8 were not compatible with 8.1. This next is my problem, When I install iTunes everything downloads fine until I click finish. @ windows pop up, 1 after the other. The 1st one says, " Application Apple Support not found, Uninstall iTunes and try download again. "  Then a second window says, " Error 2 ",  "The iTunes Application cannot run without the Apple Support ...."  What is this "Error 2" and is there a fix for this? I appreciate everyones knowledge in helping me come to a solution. as I aint no hi-tech redneck!    Thank you,  Bob Bryan

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
    tt2

  • TS3367 Imessage an error occurred during activation. Try again. error ipod touch?

    My ipod's imessage stopped working yesterday and it was going really slow anyway so i did a full reset to factory default and made a new apple i.d, The ipod when i try to log into facetime or Imessage states "an error occurred during activation. Try again." I have looked at the forums and tried changing the dns, date and time, completed a factory reset and infact reset the router to factory default aswell and it still says the same message and there being an error in activation. Help?

    from apple : http://support.apple.com/kb/TS2755
    let's see...

  • AGAIN error during installation PC Suite 7.1

    I downloaded (twice for sure) Czech Nokia Pc Suite 7.1 for Nokia 6230i "Nokia_PC_Suite_cze_web.exe"
    I have the same problem as in here: problems with PC Suite 7.1.30.9
    ... When I get to the installtion step (5/6), the installing process halts at 27%, and an error message comes up. Annoyingly, for some reason I can only read part of the message, as the window is too small to fit the whole message and I can't expand it... The message says:
     "An error occured during the installation of assemb *cuts out here*
     'Microsoft.VC80.MFC,processorArchitecture="x86" *cuts out here*
    "Please refer to help and support for more informa *cuts out here*
    I was able to extract file "Nokia_PC_Suite_cze_web.exe" and  there was the file "VC80_x86_v2.msi"  under  Nokia_PC_Suite_cze_web\Packages\VC80_x86_v2\Setup
    When double clicked it started the installation of MSVC80 (Microsoft Visual C i guess)
    During instalation (as admin) the same error occurred but there is the full error text:
    An error occured during the installation of assembly
    'Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",version="8.0.50727.4053",type="win32"'.
    Please refer to Help and Support for more information
    So I am reffering for the help and support. Thanks
    ntb HP EliteBook, Core2Duo P8600 2,4GHz, 4GB RAM, Win 7 32bit Home Premium CZE ver. 6.1 build 7600, Zoner firewall 9.2.057,

    I found solution!
    The problem is due to the default registry size limit in windows 7!
    Thanks to ESRI Error 1935. An error occurred during the installation of assembly Microsoft VC90. 1fc8b9a1e18e3b and Vikas ke Funde Solution to Windows 7 keeps on checking update or searching updates
    These erros occurr in the CBS.log:
    Trusted Installer core was not initialized. HRESULT (0x800736FD)
    Failed to load WCP DLL. [HRESULT = 0x800705aa - ERROR_NO_SYSTEM_RESOURCES]
    As an Administrator, open a Command Prompt and run 'SFC /SCANNOW'. A failure regarding the Windows Resource Monitor should be returned.
    For resolve just
    Open regedit (Run regedit)
    Then goto and modify the value
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
    Key: RegistrySizeLimit, Type: REG_DWORD, Value: 0x8000000 (134217728)
    Change the value: FFFFFFFF (decimal 4294967295)
    Now reboot the system and check for the updates. You should be able to update
    Check by runing 'SFC /SCANNOW'. again.
    Problem solved.

  • PC/Win 64bit/Creative Cloud " We are unable to load all your plans. Please try again" error message

    I've just signed up with CC on my Win PC 7/64bit and when I log on to my Adobe account I get this error message, "We are unable to load all your plans & products. Please try again.
    Just below it I get the correct:  Creative Cloud Membership/One Year
    Any way to solve this error message?

    Thank you for your reply. I appreciate the generic list of hardware/software/browser problems, but that's a lot to go through for what seems to be a simple problem. Not all of the info listed in your link applies to my problem, so I will provide only the info that is relevent.
    1. See attached photo of Error message found in Chrome Browser.
    2. I do not get the error using the FireFox browser.
    3. My hardware works with CC because I previously had a Cloud account for one year and all the software downloaded and worked perfectly.
    4. My system is Windows 7, 64bit with 12GB of Ram Memory. I have plenty of space on my 1TB C drive
    5. I am able to download CC software, but now when I open up an application (Premiere Pro, to be precise) it says it cannot verify my account.
    6. It appears that the issue isn't my hardware or operating system, but a problem with my online Adobe account which is paid for and listed (as you can see in the screenshot).
    Can you help solve the problem?

  • "Please sign in again" error

    MacBook Pro running on OS X 10.7.2
    iTunes 10.5.1
    iPhone 4 running on iOS 5.0.1
    During the "gathering information about your iTunes library" stage after turning on iTunes Match, getting this dialog box:
    "Please Sign In Again
    iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the iTunes Store menu and try again."
    Of course, no specific error is given.
    So in iTunes/Store I sign out/sign in, then turn on Match again, and the gathering info process begins anew, which takes forever.  This is the 2nd time it's happened, each time about 3/4ths of the way thru the process.
    What's up?  I should have known better than signing up for this service this early.

    Christ!  I've wasted 2 full days on this and counting.  At least I am closer to the goal by now but still.  Steps 1 & 2 have run their course and now Step 3 is stalling badly (some shy of 5,000 tunes uploaded out of the expected 7,200 or so).  This glacial pace is beyond ridiculous and incredibly frustrating.  As to why Apple released this service in such a state is beyond me.  They are treating users, the general public, as their QA workforce, that's what it is.

  • Can't upload YouTube thumbnail. "Try again" error

    Every time I try to upload a YouTube custom thumbnail, I keep getting a "try again" message. I've tried resetting Firefox back to default, uninstalled/re-installed the web browser, I've made sure my thumbnails are the correct size and file type(which they all are).
    I'm not sure what else to do. Every time I want to upload a custom thumbnail, I have to use Google Chrome. I'm trying to avoid using Chrome more than I have to. If anyone could help find the solution, that would be great.
    Thanks!
    P.S. I added a picture to show the error I keep getting.

    → history → browsing data
    Time range to clear: → Everything
    ▼ Details
    [x] Browsing & Download History
    [x] Saved Form and Search History
    [x] Cookies
    [x] Cache
    → Clear Now

  • Since upgrading to 8.0.1, on 80% of the addresses entered Firefox give me a "server not available - try again" error message. What did you guys do?

    Since upgrading two days ago to Firefox 8.0.1 I get this error message on 80% of the addresses I try to access:
    Server not found
    Firefox can't find the server at orders.tigerdirect.com
    Check the address for typing errors such as
    ww.example.com instead of
    www.example.com
    If you are unable to load any pages, check your computer's network
    connection.
    If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    What's the problem with the upgrade?

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

Maybe you are looking for

  • BEx error when deleting a query in BWD

    Hi All, I am getting error "BEx Transport request ‘BWD903385’ is not available or not suitable" when trying to delete a query in BEx in BWD. Does any body knows the solution to this. Thanks in advance and I will assign points.

  • IMessages not going through on iPhone 5 iOS 7

    My iphone 5 with iOS 7 isn't sending iMessages. Regular text messages go through immediately almost always. I am using the phone at home, at work, places I've been before the iOS 7 update & hadn't had a problem until i updated my phone. Sometimes tex

  • ShutdownHook doesn't work for me

    In my application I have created a cleanup class that I called Exitor which implements Runnable interface to gracefully close my database connections and write a message into a log file. Then I put the following peace of code: Thread cleaner = new Th

  • Public class must be written in a seperate .java file?

    Hi, 1. why is it compulsory for a public class to be written in a seperate .java source file? 2. why can not a .java source file contain more than one public classes?

  • Match Text Colour To That Of Image Portion

    Hi I want to be able to make some text the same colour as a portion of an image in my document i.e. find out what colour is being used in a particular area of the image. How would I achieve that? Thanks