Again getting black screen after Exiting Safe Mode in Windows 8 as suggested by hp

I'm again getting black screen after entering safe mode after upgrade to Windows and exiting from safe mode but after exiting my laptop display was of 8.b but after some time it again went back to same black screen problem .I disabled Intel and amd hd 86graphics driver in safe mode.please help .

Hi there ,
Thank you for visiting the HP Support Forums and Welcome! I have looked into the issue you are having with your display Turning Black after entering Safe Mode. I found a document for you called Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot. It would be very helpful for me to know what has been done already so that I can narrow down what troubleshooting would be best for you. You mentioned in your post "again". Is it an intermittent issue? Please follow these provided troubleshooting steps, re-post with the results of the steps in the document, and any other troubleshooting steps you had tried and the results. Have a great day!

Similar Messages

Black screen even in safe mode

Basically what the title says. The story is that I got the "black screen after log in but cursor is there" problem. I looked up online and it said I should restart in safe mode to disable the display driver. I did just that and set it safe mode minimal. When I re-boot it up it's just a black screen. If I move the cursor it says *safe mode* on 4 corners of the screen but that's it there's nothing else on the screen.

Hi, last try is to install os manually, a clean os Install (way to go here)
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Black Screen after logging in locally to Windows 7 that previously had an open RDP session.

Here is what happens. I leave my home computer on (running Windows 7 Ultimate) and sometimes I will remote to it from another location (work, friends house, or wherever). When I return home, I will go to login, the screen then goes blank (no mouse cursor
or anything). I have to do a cold boot to get back into Windows. This only happens if I ever RDP into it sometimes during the day. It seems random. I've tried logging off the RDP session, just closing it without logging off, nothing seems to be the answer
in that regard. It seems very random at times. I'll go a week and I can come home and it will login fine with no problems. Then the next week it starts giving me the black screen after I come home and login locally. I've seen several black screen issues here,
but usually they are getting it before logon. Anyone have a clue what might be causing this?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
As the question is off topic here, I am moving it to the
Where is the Forum... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Getting black screen after trying installing windows 7 using bootcamp

I downloaded ISO for windows 7 ultimate 64 bit and after using boot camp and partitioning my hardware the computer re stared as expected but then i get the black screen saying "Press any key" and i think its becuase windows 7 can not boot up what can i do to fix it.
I also tried downloading different ISO versions but it didn't work.
I Have a mid 2012 mc book pro 13 inch

The hatter wrote:
A Mac Pro (not a notebook) should be 95% fine w/o. A notebook like MacBook Pro is not "Mac Pro" which are 65 lbs. So don't confuse us iwth Mac Pro and MacBook Pro.
On Mac Pro you have to pull all the other drives but the one you will install on - that means no external drives etc,
Sorry I don't get your post? And was it a reply to my or the OP?
Should be 95% fine w/o??? What does that mean?

Ipad mirroring on Apple TV getting black screen after os upgrade to 7.0.3

Ipad mirroring works in 7.0.2. After upgrading to 7.0.3, on mirroring the screen goes black. Do we need to upgrade Apple TV or is this something else?

I have the same problem since my upgrade to iOS 8. black screen, no mirroring. It worked perfect until the latest iOS 7 version on my iPad 2

Dvd studio pro- get black screen after build/format

hi all i need help, have made dvds before using dvd studio pro now it wont work.
in simulate the menu buttons and video work perfectly but once i build/format and mount it in toast the menu wont load, i get a black screen. i tried to unisnstall then reinstall and it hasn't helped.?
any thoughts?!
latest version of fcp studio

Replied in the [other thread|http://discussions.apple.com/thread.jspa?threadID=2373333&tstart=0] and see you did have it working before. Have you changed something in the system recently?
Did you remove receipts/packages to make sure the reinstall was done and/or did you delete preferences? Can you burn DVDs from DVD SP still?

Black Screen after ASUS logo but before WINDOWS logo and logon screen

Ok. So I have a custom built PC with an i5 Intel core and windows7.
PC was working fine, but the next day after booting it up, I would get the usual ASUS logo with "press f2 or del to enter bios"... and this is usually followed by a 2 second WINDOWS loading bar going into the logon screen. But after the ASUS logo,
the loading bar doesnt show.. and the screen just dims like it went into sleep mode and nothing can wake it up or anything. The PC, fans and everything are still running and working fine.
From what Ive read up and researched on this so far.. it may most likely be some sort of admin/privilege issue. But I have no way of entering safe mode. Pressing/holding F8 brings up a boot up menu, not the advanced boot options to select safe mode T_T.
What do I do?

Hi,
Like Rick said, it sounds like your computer is with problem instead of Operating System.
Thus I suggest you send your computer to ASUS support center to take a hardware detection.
Karen Hu
TechNet Community Support

Getting black screens when i open a new window through a link or try to look at the menu options.

When i load a new window/click to go to a website, all i get is a black screen. then when i want to look at my bookmarks all i get is a black pop up screen (cant see anything). if i try to navigate to the other tabs open they become black as well

I did find the problem... It was the DivX Plugin for Firefox. I just found I wasn't using it. I went to Add/Remove Programs and uninstalled it. FYI I am running Windows 7.

Can't boot my T500 anymore... just getting to a black screen after the XP logo

I have a big problem with my Lenovo T500. Never had any problems before. Then yesterday, I could not open OpenOffice anymore, neither convert to pdf from an already open OpenOffice document. I got error messages saying the programmes can't be openend. After trying to re-install Adobe Reader failed, I simply wanted to restart the computer, seeing if that oculd help. And now the big problems started...
Re-booting was not possible. For 20 seconds, it seemed normal. But directly after the Windows XP logo (using
Windows XP Professional 1), the screen went black and that was it. I see the mouse cursor and can move it, but that's it.
After waiting some time, I turned the laptop off with the power button. And restarted it. This time getting to the screen where I could choose "safe mode" or normal startup, because the computer had been shut down improperly. First I tried normal mode, which lead to the same black page. Then I did the same again and tried "safe mode", which didn't work either - I just got the black screen with the "safe mode" notifier in every corner.
What I tried then was the ThinkVantage button directly when starting the computer. Which lead me to the "rescue and recovery" menu where I could choose what to do: Complete recovery, losing personal files (it's about music, pictures, text documents for me) or quick recovery without losing files. Also there was the option of saving files before through USB. This is what I tried first. I marked 50GB of files and wanted to transfer them. Problem: Every external harddrive or USB stick I connected was not identified. So this failed.
I chose to go with "quick recovery" first then. This took about 20mins. When it was done there was an automatic re-start which unfortunately got stuck at the black screen again...
3 more re-starts using the power button did not bring anything either. The ThinkVantage button does not let me access the rescue and recovery menu anymore. It just says something like "checking the system" and then there is an automatic re-boot, which ends up at the black page.
I am mighty scared now that I lost my computer and the data on it (I have backups for most things, but still).
Does anyone know anything that could be done now? I do not have XP or anything, by the way. I bought this computer used a year ago and got it complete with XP installed (although I do have the product key). The warranty from the place expired 5 days ago and the place is in Germany, but I live in Sweden. They told me they can't help me but I should contact a local repair place.
If anyone has an idea about what the problem could be (virus??) and maybe some help, I would be VERY VERY thankful.

Maybe I should add that I probably didn't do the best thing with anti virus programs. I used Microsft Security Essentials, which was installed when I bought the computer.
When downloading some program (not sure whether it was Acrobat Reader), I was asked to get McAfee. Kind of weird, I had said no. But McAfee somehow checked my computer and told me my MP4 player contained a trojan. That was 5 days ago. Security Essentials couldn't find it, even scanning the MP4 player directly. I guess I should have switched right away and to get McAfee to remove the thing? Maybe this is what caused all the trouble...

GTX670 - Signal lost/black screen after windows loading icon

Hello,
I hope I am posting this in the correct forum area. If not I do apologize.
Here are my specs:
Board: MSI Z97-G45 Gaming
Bios: ?? whatever pre-installed on mobo
VGA: MSI GTX670 OC
PSU: Corsair HX750 750W
Intel Core i7-4790K
MEM: 12 GB Kingston HyperX DDR3 1600 2x 4GB, 2x 2GB sticks
HDD: SSD Kingston 120 GB (Win7), HDD 1 TB WD 7200 RPM (Win7), HDD 1.5 TB WD 7200 RPM (storage)
COOLER: Corsair Hydro Series H60 Water Cooler
OC: no overclocking done by me..default settings
OS: Windows 7 64bit Professional
So to keep this as direct and as short as humanly possible here is my situation.
Had a gtx670 card that I had to send back to MSI under RMA. They sent me what looks like a new gtx670 card (no dust) that I received yesterday (4 Aug). Last night I removed temporary old card (9800gt) and plugged in new 670gtx. Things seemed to be ok, reinstalled driver after card was recognized. Played one round of Battlefield 4 for testing purposes and all seemed good.
Upon exiting the game things went south in a hurry. Moving the mouse cursor around was extremely slow and choppy. Mouse clicks were not recognized. I could not bring up ctrl-alt-del to get to task manager. At this point the cursor turned to spinning circle as if things were happening. However, after 5+ minutes of nothing changing I did a hard boot.
Restarted and after the windows loading screen the signal appeared to be lost to the monitor and I was left with black screen. This was with the SSD. I then attempted to load into the HDD windows OS that I hadn't logged into yet with this card and was greeted with the same issue.
I can load into Safe Mode with no issues. In safe mode I removed all nvidia drivers and was then able to load into windows normally using basic windows vga drivers. The moment I load the Nvidia drivers and restart the computer I then have the issue again. This happens with both drives.
I have reset the video card in the PCI-Ex16 slot and still received the problem. I have tried a different PCI-Ex16 slot and still had the issue. I put the old 9800gt card back in and windows loaded perfectly and without issues on both drives. I put the 670gt in and try to load into normal windows and I lose signal and get black screen after the windows loading screen.
I'm at a loss at the moment. I think it's the drivers, but could it be the card?
Doing some research I've come across some people saying there may be issues with the nvidia HD audio drivers that are installed with the video drivers. Could it be as simple as uninstalling or unchecking that particular driver?

Flashed the BIOS last night to the latest version and attempted to launch windows with the GTX670 card. I still experienced the same issue where as soon as windows finishes it's loading animation (with Nvidia drivers) and it goes to the login screen, the monitors cut out.
At this point I feel like it has to be the card. The moment I install the video drivers and restart, I have the problem of losing the signal/black screen.
What I have done:
1) Completely wiped any/all video related drivers from the computer and started from scratch. No success.
2) Ran Memtestx86 to see if it's a problem with my memory sticks. No problems found.
3) Put the card in a different PCI-Ex16 slot to see if there was a problem with the slot. No success.
4) Flash updated the BIOS on the motherboard to the latest version. No success.
I have a dual boot computer with Windows 7 64-bit installed on an SSD and a HDD. The problem happens on both drives. Yet, the moment I install my old 9800GT the problem disappears and I can login to Windows just fine.
I will be sending the card back today on another RMA.

When I open FireFox i get the blue screen of death and then vista restarts. I get to login and then afterthe welcome window it crashes and restarts again. I can open in safe mode but if I open firefox again it restarts this loop.

The other day I opened firefox after the latest update in September. Firefox then closes and then i get logged off and vista(32 bit) restarts. I get back to login and when I try to login it gives me the blue screen and restarts again with the selection screen (start in safe mode....)I was able to login on safe mode and then on admin afterwards. Thinking the problem was just an error I went back and opened firefox on my account and the loop started again. I was forced to remove firefox but I want ti back and I want to know how this can be fixed so I can put it back on my computer.

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

Ipod 4.3.1 : after playing a video, i couldn't get the replay button, instead of that i get black screen fully

ipod 4.3.1 : after playing a video, i couldn't get the replay button, instead of that i get black screen fully

Have you tried resetting your iPod: Nothing will be lost:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

Cannot reinstall windows 10 Technical preview after getting black screen at start. will not let format drive or install

cannot reinstall windows 10 Technical preview after getting black screen at start. will not let format drive or install

you may need to use a DVD from an earlier version of Windows or slave the disk to wipe it with disk manager
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat?

Does anyone get a black screen after dismissing the balance on a paygo phone

I get a blank, black, screen after dismissing the balance on my paygo 3GS iphone. To get rid of it I put the phone into standby and then wake it up!

From your logfile
[787100.353] (EE) Failed to load /usr/lib/xorg/modules/drivers/i740_drv.so: /usr/lib/xorg/modules/drivers/i740_drv.so: undefined symbol: I740_Sync
Corruption seems the correct assumption here; I'd boot using a rescue disc; then mount your actual system and reinstall all packages. After chrooting, that should be something like pacman -Sf `pacman -Qqet`

Black screen after windows 7 update?

Last night i left my Macbook Pro downloading a game on steam overnight, when i got up in the morning it seems like it restarted and went onto the mac login screen. So i restarted it into windows and it had been installing an update, and it said something like "installing clientregistry" with a number/number (it was the last step). It then restarted again and so i booted into windows, except after the screen where the colours fly around, i can see my cursor for a tiny bit then the screen goes black. You can tell it's still on as the fans continue to run and the brightness is a bit higher than what it would be if it was off. When i go onto the mac side, it says something like NTFS 3G force or abort, i chose force but it doesn't change anything. If i boot into safe mode in windows (when it detects it didn't shut down properly), i can get to the login screen and login but it says error cannot load profile, and it restarts after a certain time.
It's very important that my windows works as the only way i can access a copy of windows 7 disc is from school, and the holidays just started

Thanks for the reply,
if i hold fn+f8 it gives me heaps of options, i tried the safe mode and it loads a ton of things but gets stuck on class.pnp at the end. Before safe mode would work and let me in for a couple of seconds before a force restart with a smaller resolution, but now it doesn't go through? Also, i tried to install something called macfuse but it doesn't work properly and now i don't even think i can read the volume through my mac side. When i boot up it comes up with two warnings;
i) NTFS-3G Mount unsuccessful
The disk contains an unclean file system (0, 0).
The file system wasn't safely closed on Windows.
Fixing.
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8) the MacFUSE file system is unavailible(71)
ii) A very similar log as the one previously but with NTFS-3G written all over it
I'll uninstall macfuse as it proved useless. Before i could see the windows hd on the desktop, now it's just gone, maybe it's corrupted somehow? Should i try repairing it as one of the options in the safe-boot selection area?

Again getting black screen after Exiting Safe Mode in Windows 8 as suggested by hp

Similar Messages

Maybe you are looking for