Again, issues with burning a cd and receiving error 4280

I've seen and read all of the topics and responses to the error 4280, tried many solutions from the compaq website and apple help site, and so far I havent found a solution. Here are my cd diagnostics...
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
iTunes 4.7.1.30
CD Driver 2.0.4.0
CD Driver DLL 2.0.2.0
LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.0),
Video Driver: NVIDIA GeForce4 420 Go 32M GeForce4 420 Go 32M
Check the website of your computer manufacturer or video card vendor to verify that you have the latest video drivers.
IDE\CdRomHL-DT-STRW/DVD_GCC-4241N_______________0C29___, Bus Type ATA, Bus Address [0,0]
Some Dell computers need an update to the ATA bus driver before iTunes recognizes CDs. If you have a Dell computer, check the Dell support website for details.
D: HL-DT-ST RW/DVD GCC-4241N, Rev 0C29
Media in drive is blank.
... Any possible help is greatly appreciated.
compaq presario R3000   Windows XP  

If you're burning it as an expanded image then it's probably as Malcolm suggested. The alternative is just to burn it as a data file. Then if it's a 535MB .dmg file it will fit easily onto a 700MB CD. The decompressing will only take place as and when you need it to.

Similar Messages

  • Issue with burning and importing music

    my MBpro is excessively "picky" about burning, or importing music from or to a cdr.
    System details
    MBPro 15in
    2.16GHz Intel Core 2 Duo
    2GB RAM
    current OS: OS X 10.6.8
    here is summary of issue.
    Ive been transferring all my CDs to my HD. Sometimes, i will insert a CD (all CDs mentioned within are purchased) and each time is a guessing game as to if it will recognize or read it and import the CD. Sometimes ive had to re-insert the same cd 3-4 times before it will recognize/read it and import it. Condition of disc i.e. scratches etc. doesnt matter (within logical reason, i dont try to insert a CD that is obviously unreadable). could be brand new, or several years old in like new condition.
    i have also had this issue with a blank CDR and trying to burn music from my iTunes to them, also playback of a CDR that i had created using this laptop. Ive purchased and thrown away probably 2-300 brand new blank cdr's because it wont recognize them.  I do remember not having an issue of creating cds when i used the "black" style CDR's. Which i have yet to try out, since this issue arose. I dont want to spend the money on the black style cdr's and it be a waste. 
    I realize that its an older MBPro, and would understand if the super drive unit, itself is worn out, and just needs replaced. anyways, any help is appreciated
    thank you.

    Hi JTKC12,
    If you are having issues importing from or burning to CDs/CD-Rs, possibly due to a Super-Drive issue, you may find the troubleshooting steps outlined in the following articles helpful:
    iTunes 11 for Mac: Import songs from CDs
    http://support.apple.com/kb/PH12278
    iTunes 11 for Mac: If you have trouble burning a disc
    http://support.apple.com/kb/PH12149
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Regards,
    - Brenden

  • TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

    I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
    The HTC hotspot works fine with everything else I connect to it.
    Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
    I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

    I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
    I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

  • Sync issues with iPhone 6 Plus and iTunes

    I'm having issues with syncing my iPhone and iTunes.
    I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
    Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied).  The longest this has occurred for is 2hrs.  After this time I have stopped the sync and ejected my iPhone.
    I had another issue with my phone when playing music.  When going to play music, I was given the error message saying that the song could not be found.  I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'.  I found the song and could see that next to the song was a small what looked like dotted grey circle.  After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song.  I did this and this was when the issue occurred again.
    I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again.  This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone'  tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play.  All played ok.
    I have read lots in the Apple forums about lost of difference reason this may be happening.  Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it.  My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
    I all so had this issue with my old iPhone 4S.  The problem occurred when running iOS 7 and 8 on the 4S.  When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app.  However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
    I am in contact with Apple Care, but this is such a long process. 
    So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful.   Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
    I will update my post with any information provided by Apple Care as and when I get it.
    Thanks for reading and thanks for your time.
    Mark. 

    Hi,
    Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
    Firstly I just want to updated my details about what version of Mavericks I'm running.  I'm running 10.9.5 - I put the wrong version down in my original post.
    So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
    I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices. 
    The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem.  For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD,  this was added and encoded with the version of iTunes that was running at the time of adding the music.  So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
    At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version.  However, due to the amount of music that I have, this is going to take a long time.  When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone.  This may just have been luck though at that time.
    Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on.  The only down side to this fix as far as I can see at the moment, is  that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
    I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
    Thank you all for your comments.

  • HT1349 Has anyone had issues with the iphone 4s and facebook.

    Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

    @razmee: rather unhelpful.
    @tata - we're having the same trouble, and the only solution we've found doesn't fix it.
    1) uninstall
    2) login on PC/MAC and change password
    3) reboot iphone
    4) install facebook app, reboot again
    5) login from iphone. 
    No joy.
    Safari works, but not for the apps.
    Of course, it's Facebook that has to fix this.

  • Issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4

    Since upgrading to the final version of OS X 10.10 Yoesemite I have issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4. I don't recall their being any issues while I went through the Beta testing process.  The Adobe products (PSE and PE) give me a configuration message "error 16" and it tells me to uninstall and reinstall. I have done this a few times/  It seems to go through the whole install process until the startup where it crashes.  I downloaded PSE 11 and at least it starts up but I haven't used it to do anything.  Also DiskWarrior 4.4 does not load up from the hard drive anymore (error message) and when I boot it up from disk is doesn't give me the option of correcting permission when repairing files and folders.
    At lease all of otheother software including Photoshop Lightroom 5.6 seem to be working.
    Very sad

    Barbara,
    Yes, I accessed the "updates" menu from the Help pull-down menu.  I also accessed the updates using the Mac Terminal application with results shown in my original post.  Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
    Update Failed
       Updates could not be applied
       The error log file may help you in identifying the problem.  The, try updating again.  If the problems persist, contact customer support for further assistance.
      The error log file read as follows:
       Photoshop Camera Raw 8.5
       There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
       Looking at the the output of the Mac Terminal app, it shows:
       ... hdiutil: attach failed - no mountable file systems
       Is this relevant?
    Regarding your follow-up message pointing to:
    Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
    the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
    Thanks

  • HUGE issues with I Pod Touch and new software

    Christmas Day I opened I tunes to load some new CD's for my hubby and I. It said I needed the new I Tunes, so I downloaded it. Procedeed to get CD's loaded and plugged in hubby's I pod (it's about 6 years old and wheel style) it synced and was done in no time.  I then plugged in my 3 year old I pod Touch, the system said it too needed an update, so I procedeeded with the IPod update.  Towards the end, it said it was unable to complete the update (error 1602 and again later error 1604).  It then locked up the Ipod and wiped it out.  I have spent 2 days doing ALL the various steps I can find ANYWHERE to fix the error. The forums ALL say it's my computer and USB issues.  I have done ALL the steps numerous times to "repair" the issue with NO luck it still says error 37 when I try to install the USB driver ( the port is an "enhanced" 2.0 port).  I took the same cord and I pod downstairs to my daughters comuter that is running a version of Itunes 10.5.1 I think, It restored my I pod to the factory settings and it now turns on and has all the information to start to configure it again.  So, took it BACK to my computer thinking that now the restore/update is complete that my computer should "see" the I pod again.   NOPE!  It still has the SAME problem.  I have tried to install an older version of Itunes and it will not let me as the library has been "created by a newer version of I tunes".  I am NOT a computer person at all and all the items I've tried have NOT worked.  It is obviously NOT my comupter having USB issues as my daughters much older computer not only found the Ipod, but was able to restore/update it.  I HAS to be the new ITunes 11.1 version.  I have over 2500 songs on my I pod and depend on it at work as I have no radio reception.
    I am at my wits end and very angry. 
    I run Windows XP on an older computer, but as I mentioned, my daughters older version of I tunes not only found the I pod, but restored it and updated the software.  I want MY Library back on MY I pod so I need to use MY computer.
    Any SIMPLE easy to follow ideas to fix this once and for all would be greatly appreciated.  I have done all the USB steps and uninstalled/reinstalled and did the recovery mode and all those steps so many times.  It still won't read the "driver" on the I Pod touch.
    Thanks for any help.

    I guess it's 4th Generation, I have no idea, it's a 32G and I've had it 3 years now.
    Her computer runs Windows XP as well.  It's an even older computer, the ONLY difference is that I did NOT update ITunes to her computer.  Problem is, MY library is on MY computer.
    I know it's an issue with I Tunes itself based on the fact my husbands older I pod will sync just fine to our library after th new I Tunes updates.  It is JUST my Ipod touch.
    I cannot go back to an older version of Itunes either because the library was "created in a newer version"

  • However, we've had issues with other legacy systems and programs for outlook

    I have a user who when she logs into her workstation and tries to access her outlook folders she is denied access. If she removes and then adds them back they work. Only one other person on our network had this problem which I initially thought was connectivity
    related. I replaced their cat five cable and that seemed to solve their problem. I tried this with this user and it cleared up for about a week but happened again today. Any thoughts or experience with this. Outlook doesnt support archives in a network share
    so I cant turn to them. It uses a login batch script to load mapped drives according to department. This all predates me so I did not build them. However, we've had issues with other legacy systems and programs so it is highly possible that this could be an
    issue.

    Will:Hi! Hi!
    I use Firefox and it is now No. 1 on my choice of browsers. I agree it doesn't like the "for IE only" coded sites but then IE is now a non issue as it is dead in the water! So Safari is now really bloated and getting slower by the version. Firefox is quick, good to look at with numerous skins, and what is more has become the browser of choice for web developers on both platforms because it sticks to the WWC3 code. Camino is just another flavour of Netscape which seems to be a bloat AOL IE wannabee product. Do yourself a favour and download Firefox. Give it a few spins around the block and I'm sure you will agree. As for the sites it declines to accept because of bad code, then I would suggest a strong letter of protest to the webmaster! For too long IE has been flouting the rules and trying to be the only game in town. Take some affirmative action and let the webmasters know there are other browsers available to users. If you are still not a believer then check this out:
    http://www.pcworld.com/reviews/article/0,aid,118959,00.asp
    May the force be with you!

  • Issue with JMS inbound Adapter  and Asynchronous BPEL

    Hi Gurus,
    I am facing the below issue with JMS inbound Adapter and Asynchronous BPEL .
    I have 2 JMS Queues one inbound and one outbound . The Composite has multiple BPEL Components around 4 on an average and i have 4 composites similar to that .
    Totally 4 Composites * 4 BPEL Components = 16 Services
    Propoesd Solution :
    I have used MessageSelector in the JMS Adapter for selecting the incoming message. The BPEL gets invoked if the message selector is true and proceses the Message and writes the response to the other Queue.
    Initially i had no problems but intermittantly the BPEL processes are getting invoked but they are not processing the data ( Bpel process is supposed to invoke an external service and get the response in a sync call) and each BPEL processe instance is in running state for ever . This remains even if i restart the servers .
    The message gets read by the JMS Adapter , BPEL instace gets created but it wont proceed futher and remains in the runnign state for ever.
    If i redeploy the Composite then messages get processed but the issue creeps up again ( i tried to checl the logs but ino cluea about the issue .
    Getting frustrated day by day tried the bpel.config.transaction, increased the JMS Adapter threads , inreased the worker threads but all in vein..
    please let me know if any one has faced similar issue .
    Anticipating a quick response from the gurus.
    Lakshmi.

    We are also facing this issue in 11.1.1.5.
    Breifly the issue is : The BPEL process which polls an inbound JMSAdater ( consume_message) either stays in running state forever ( whatever we do) or go to the recovery queue. It doesnt recover even if i try to recover it. This happens intermittently. Redeploying the application / restarting servers sometime solve the issue but as know we cant do that on prod systems .
    Can some one look into this on priority and help us giving a solution/workaround.

  • If I stay with the free trial and receive over 50 responses will I get notified to upgrade?

    If I stay with the free trial and receive over 50 responses will I get notified to upgrade?  I'm wondering if I will know if more than 50 people respond.

    Hi!
    Just wanted to add some additional detail to Gen's response.
    With a free account:
    The first time that your form reaches 5 responses, FormsCentral will send you an email letting you know that your form is seeing some action and that you may wish to upgrade.
    Then the first time that your form reaches 45 responses, FormsCentral will send you an email letting you know that you are getting close to your quota, again giving you the option to upgrade.
    Finally, FormsCentral will send you an email once your response count goes over your quota of 50. ie. on the 51st response. Responses will continue to be collected until the count reaches 75, giving you time to upgrade. After 75 responses, people accessing your form will see a message that the form is full.
    Hope this helps!
    Shannon

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

    Greetings everybody,
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
    On this particular product, the product variants are supposed to work in such a way where:
    If you select the value "1/8" from the "Choose Ribbon Width" field
    THEN
    The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
    I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
    Thank you very much for your time and help!

    Hi...
    I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
    Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
    At the top of this window you'll see the following:
    Apple Support Communities > Mac OS & System Software > Safari > Discussions
    This the Safari forum for the Mac OS X.
    Better that you post your topic here  > Developer Forums: Apple Support Communities
    I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

  • Issues with Bex query structures and Crystal Reports/Webi

    Hi experts,
    I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
    Budget $
    Budget %
    Actual $
    Actual %
    Budget YTD
    etc
    if I drag the structure into the Crystal Report detail section with a key figure it displays like this
    Budget $     <null>
    Budget %     <null>
    Actual $     300
    Actual %     85
    Budget YTD     250
    the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
    Actual $     300
    Actual %     85
    Budget YTD     250
    Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
    Business Objects Edge 3.1 SP2
    SAP Int Kit SP2
    OS: Linux
    BW 701 Level 6
    Crystal Reports 2008 V1
    Thanks
    Keith

    Hi,
    Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
    ingo

  • HT201210 I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with prompt to restore, phone w/screen with iTunes symbol and can't use.

    I tried to restore my iPhone 4s through iTunes and received error message that Restore could not be completed due to error 2003. Phone now not recognized in iTunes, with repeated prompts to restore phone. Now phone w/screen with iTunes symbol and USB cord can't use. It appears the phone has been restored, but I cannot activate it.
    I disabled my anti-software, iTunes and computer software (microsoft vista) are both up to date, I restarted the computer several times. My usb ports are working properly. I followed the troubleshooting suggestions from apple.

    yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
    and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
    trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
    no worries

  • TS3694 i was updating my iphone to 6.1.3 and received error code 6 would some help me with this error

    im updating my iphone 4 to the latest update and received error code 6 would someone tell me what is this?

    Hello, Joyce.
    Error 6 can be tricky.  It usually is related to a 3rd party software conflict like security software or a modification of your TCP/IP protocol.  It the article that you referenced, iTunes: Specific update-and-restore error messages and advanced troubleshooting, see the section labeled "Errors related to third-party security software".  Go ahead and try the first two of that section.  If that does not work an uninstall of your antivirus software or attempting to restore on a new computer might be necessary.  I have included the links to those steps below. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/TS3125
    Cheers,
    Jason H. 

Maybe you are looking for