Again with the Continuously Rasterize of 3D Shape Layers and Effects Problem in CS3

Hi! I have been looking into the forum for some help about this issue and although it have found a lot of related threads I really can't make this combination of features works well...
I mean I can't apply any "Distort" effect to any 3D "Shape Layer" cause finally the effect cause unexpected results (basically the effects loose his "alignment" with the layer as soon as I transform that layer even if I make a Pre-comp and apply the transformation there (cause I still need rasterization activated on it to maintain quality in zooms and scales). So, really could be a way that allow me to apply this effects to a continuously rasterized layer (or Pre-com) and it works as well as if they were applied to a Solid/Image Layer when use some kind of transformation or camera movement over it? Uf, I still really hope so...
Well, I'm now a little desperated so I'll be very grateful for any help; and sorry if I'm missing something obvious but I think I have tried all the possibilities (pre-compound and turn off 3D Layer option on both items with any combination, turn on or off rasterize option here and there too, apply the effect in the pre-comp layers or in the comp ones, etc...) and I think at this moment I start to loosing my faith...
PS: Ouh, and I hope you understand my "English" too...

>So, really could be a way that allow me to apply this effects to a
>continuously rasterized layer (or Pre-com) and it works as well as if
>they were applied to a Solid/Image Layer when use some kind of
>transformation or camera movement over it?
That's completely impossible. It goes against how AE effects (and ultimately the entire render pipeline) work. I think I know what you are hoping to achieve, but it is mathematically and technically illogical. Displacment effects work on pixels, not the original vector data, anyways. Only dedicated vector effects can manipulate path contours. AE is no different than Illustrator or Freehand in that regard.
Also: whenever you change the scale of a Shape Layer, you change the size of of the vector data which is then rasterized based on the bounding box and in some cases the cropping area defined by the composition borders. Therefore the layer size would steadily increase anyways and the result of your displacement would be different for each frame - what looks okay with 5px displacment values at frame 1 would barely be noticable on a layer that is "blown up" to 10 times the size on frame 100.
So for all intents and purposes you need to work with big layers and without continuous rasterization, no matter how much you may dislike it.
Mylenium

Similar Messages

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

Hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone helphi just

hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone help

Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414

HT201250 i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. do i keep my files in the portable hard disk when I connect it again with the macbook or the time machine will era

i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard drive

Welcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org

IPod classic hard drive needle sometimes skips (Red X). When it doesn't and seems to power on normally, I start to restore it in Itunes and then it starts to skip again with the Red X on the screen.

iPod classic hard drive needle sometimes skips (Red X). When it doesn't and seems to power on normally, I start to restore it in Itunes and then it starts to skip again with the Red X on the screen. One time I was able to run the disk utility in time and reformat the hard drive, but the red x ended up appearing again and the hard drive started skipping again.
Is there anything I can do besides get a new hard drive?
P.S. I have also tried the banging on palm/floor trick and it hasn't worked yet for me.

There nothing we can suggest to save a bad iPod hardisk, except to try some 3rd Party software to try repair the Hardisk.
The Super Fix for Most iPod Problems
See this earlier post on partition repair using 3rd Party EaseUS Partitipon Master software.

Linksys E4200 - has to reboot to connect again with the internet

I bought the E4200 a month ago (replaced D-link DIR-655) and since then I have to reboot it twice.
I have a NAS connected to the router (and router to cable modem) and sometimes I have to FTP files from abroad. If I use the FTP too much time the E4200 just loose connectivity with the internet. Once home I have to reboot it in order to connect again with the internet. It never happen me before with the D-Link.
Does anybody has a similar problem?
Thanks!

Actually mine is working great now, almost as if it had a break-in period.
Mine has not flashed once in the past day (or more) and the last time I rebooted it was Wednesdsay evening (only to see if I could stop the flashing which was still happening
at that time).
I was also online on an interactive (gaming / gambling) site that is very quick to report what it considers "disconnects" if it sees any weakness in the connection to its servers and when using the E4200 it did NOT disconnect a single time all day yesterday.
(My Belkin N1 Vision wireless router connection via my Rosewill RNX-N1 USB adapter had been "disconnecting" multiple several days in a row although I was able to surf the web without issues while it reported me as disconnected).
Possible reasons everything is fine:
1) I placed the router's four ridiculously tiny feet on four thick wooden drink coasters
to give it more breathing room.
The flashing stopped a day or two later... (Keep in mind the router is less than a week old, so the reason it stopped flashing could be unrelated).
My wireless signal strength does seem to be sensitive to a 5.8 GHz cordless phone strangely even though it is a 2.4 GHz wireless adapter.
Just turning the phone (which has an INternal anntenna and is about 3 1/2 feet away from my wireless adapter at the moment) 15 or 20 degrees immediately changed the wireless signal quality from 4 bars to 3 bars and vice versa!!!
2) As far as my needing to reboot it that one time (during the first full day I owned the E4200):
I had been switching between two different model Rosewill wireless adapters a few times that afternoon (same chipset, same driver I believe and even show up as
same device in 32 bit Windows 7 Device Manager) without restarting the router after each switch
Since that one reboot, everything has been fine and my connection has been solid (pingtest.net tests over wireless produce an 'A' and speed has been for the most part relatively stable at 130 Mbps).
I hope thay helps others here (especially Part 1 above).
So overall I am extremely happy now.
I now just need to see what the implications are by the current lack of official IPv6 support in the E4200 (will post separately about that).
I noticed that my "IPv6 connectivity" on the wireless connection showed "no internet".
I just ran some IPv6 tests online (on two separate sites) and they passed and, lo and behold, now it shows "internet access" (again) for IPv6 (and not just IPv4 as it did before)!

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
Regards.

I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

Adobe admits to a Flash problem here:
http://forums.adobe.com/message/6285851#6285851
YOu can apply the fix they show and tehn wait for them to fix the problem

Will i have to do it all over again with the new ipod?

my ipod is super beat up and it's time for a new one, so i deleted all my itunes programs off of my computer and i've reinstalled them.
while i'm saving up money for a new ipod i wanted to go ahead and reimport all my songs into a library, once i do this am i able to just plug the new ipod into my computer and all of these songs will update and i'll be all set?
or will i have to do it all over again with the new ipod?

Once you have reinstated the tracks to your library, you'll able to sync your new iPod to it automatically and update it with the contents of your iTunes.

Hello.It is me again with the ipod touch. I tried to turn it off or to reset it but nothing.Whar can i do ?, Hello.It is me again with the ipod touch. I tried to turn it off or to reset it but nothing.Whar can i do ?

Hello.It is me again with the ipod touch. I tried to turn it off or to reset it but nothing.Whar can i do ?, Hello.It is me again with the ipod touch. I tried to turn it off or to reset it but nothing.What can I do ?

This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
http://support.apple.com/kb/HT1454

I have ebooks on my ipod and when I'm listening to a story it will not go to the next chapter, it just starts over again with the chapter I just listen too. How do I correct this? It didn't do this before.

I have ebooks on my ipod and when I'm listening to a story it will not go to the next chapter, it just starts over again with the chapter I just listen too. How do I correct this? It didn't do this before.

ebooks is a term for (mainly) textual books that can be read on screen. If you're listening then I think you mean audiobooks. See audiobooks on iPods. Either reorganize as single files or access via a playlist.
tt2

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

I am trying to install flash player on my new Macpro hardrive. It is downloaded but I get the continual message that my I.D. and password are wrong. Help please!

I am trying to install my downloaded flash player on my new MacPro hard drive. I get the continual message that my I.D. and password are wrong. I know they are not wrong and have tried a lot of combinations from old Macs and old passwords too. Nothing works. How can I get the job done?

Hi,
On Mac, this password prompt is presented by your operating system, and is intended to keep you from accidentally installing software which can harm your system. Flash Player does not throw this prompt, Apple does that.
Please provide machine credentials of currently logged in User to continue with the installation.
Hope this helps.
Thanks
Piyush

I up graded to Lion OsX and when I configured my POP account, it says is null and with the same configuration in my Macbook I have no problem at all, what can I do?

I upgraded my operating system to Lion osx 10.7 and after I ibnstalles it I coul not receive or send emails from my POP account, yes from my IMAP accounts,Itried to configure it again with the same configuration I have in my Macbook with Leopard system and it say its null, what can I do?
Carlos38

That issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"
If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the Firefox Profile Folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

What do I have to do in creating a Keynote presentation on my MAC so that when I send it to my iPad, I don't have to re-do the presentation all over again as the fonts have changed, sizing has changed and everything is basically a mess?

What do I have to do in creating a Keynote presentation on my MAC so that when I send it to my iPad, I don't have to re-do the presentation all over again as the fonts have changed, sizing has changed and everything is basically a mess?
I have downloaded many of my previous Keynote presentation into my new ipad mini and not ONE has opened properly
Rather defeats the purpose of icloud, synching, Keynote on IOS etc doesn't it?
Any tips anyone?
Cheers
Philip

Thanks for this Gary. Much appreciated. Will help with future ones.
Still a bit like using keynote in 'safe mode' and very limiting.
If anyone produces an 'auto convert' app that will save me the work of fixing existing presentations slide by slide, I'm buying it :-)
Thanks again

Again with the Continuously Rasterize of 3D Shape Layers and Effects Problem in CS3

Similar Messages

Maybe you are looking for