Again with the problems

hey guys,
so, as i wrote last time, my macbook appeared to be loose in the top right corner (push down and you can see it move/makes noise). i returned it and in exchange got one of the new intel core 2 duo oness (i was under the 14 days). anyway, about a week into my NEW one, i noticed the sides offer that same problem: when you push them in they make the same noise and appear to go in more.
maybe the screws are loose or maybe its not inserted properly, i don't know. but can someone help me? is this an on going problem with macbooks or is it just my luck with them? is this problem going to get worse?...
i dont want to have to change my lap top again...
i would definitly say its some bad luck getting two macbooks with identical problems, however, i could be wrong about this new problem.

Yeah, the same thing happens to my MB. The left side where the two screw are can move in and out a couple millimeters. It's plastic, so it's going to have some give at the seams. If it doesn't bug you too much, I would just try to forget it's there, like I do.
I also notice that the screen has two dark spots near the bottom where the hinge is on either side...that's what bugs me. I can see it out of the corner of my eyes.
-Gabe

Similar Messages

Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

IPod classic hard drive needle sometimes skips (Red X). When it doesn't and seems to power on normally, I start to restore it in Itunes and then it starts to skip again with the Red X on the screen.

iPod classic hard drive needle sometimes skips (Red X). When it doesn't and seems to power on normally, I start to restore it in Itunes and then it starts to skip again with the Red X on the screen. One time I was able to run the disk utility in time and reformat the hard drive, but the red x ended up appearing again and the hard drive started skipping again.
Is there anything I can do besides get a new hard drive?
P.S. I have also tried the banging on palm/floor trick and it hasn't worked yet for me.

There nothing we can suggest to save a bad iPod hardisk, except to try some 3rd Party software to try repair the Hardisk.
The Super Fix for Most iPod Problems
See this earlier post on partition repair using 3rd Party EaseUS Partitipon Master software.

Linksys E4200 - has to reboot to connect again with the internet

I bought the E4200 a month ago (replaced D-link DIR-655) and since then I have to reboot it twice.
I have a NAS connected to the router (and router to cable modem) and sometimes I have to FTP files from abroad. If I use the FTP too much time the E4200 just loose connectivity with the internet. Once home I have to reboot it in order to connect again with the internet. It never happen me before with the D-Link.
Does anybody has a similar problem?
Thanks!

Actually mine is working great now, almost as if it had a break-in period.
Mine has not flashed once in the past day (or more) and the last time I rebooted it was Wednesdsay evening (only to see if I could stop the flashing which was still happening
at that time).
I was also online on an interactive (gaming / gambling) site that is very quick to report what it considers "disconnects" if it sees any weakness in the connection to its servers and when using the E4200 it did NOT disconnect a single time all day yesterday.
(My Belkin N1 Vision wireless router connection via my Rosewill RNX-N1 USB adapter had been "disconnecting" multiple several days in a row although I was able to surf the web without issues while it reported me as disconnected).
Possible reasons everything is fine:
1) I placed the router's four ridiculously tiny feet on four thick wooden drink coasters
to give it more breathing room.
The flashing stopped a day or two later... (Keep in mind the router is less than a week old, so the reason it stopped flashing could be unrelated).
My wireless signal strength does seem to be sensitive to a 5.8 GHz cordless phone strangely even though it is a 2.4 GHz wireless adapter.
Just turning the phone (which has an INternal anntenna and is about 3 1/2 feet away from my wireless adapter at the moment) 15 or 20 degrees immediately changed the wireless signal quality from 4 bars to 3 bars and vice versa!!!
2) As far as my needing to reboot it that one time (during the first full day I owned the E4200):
I had been switching between two different model Rosewill wireless adapters a few times that afternoon (same chipset, same driver I believe and even show up as
same device in 32 bit Windows 7 Device Manager) without restarting the router after each switch
Since that one reboot, everything has been fine and my connection has been solid (pingtest.net tests over wireless produce an 'A' and speed has been for the most part relatively stable at 130 Mbps).
I hope thay helps others here (especially Part 1 above).
So overall I am extremely happy now.
I now just need to see what the implications are by the current lack of official IPv6 support in the E4200 (will post separately about that).
I noticed that my "IPv6 connectivity" on the wireless connection showed "no internet".
I just ran some IPv6 tests online (on two separate sites) and they passed and, lo and behold, now it shows "internet access" (again) for IPv6 (and not just IPv4 as it did before)!

I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

Adobe admits to a Flash problem here:
http://forums.adobe.com/message/6285851#6285851
YOu can apply the fix they show and tehn wait for them to fix the problem

The "+" sign which opens NEW TAB has stopped working. I have to open a new window each time. I tried uninstalling firefox and installing again but the problem still persists. Somebody guide me on this.

The "+" sign which opens NEW TAB has stopped working suddenly. I have to open a new window each time. I tried uninstalling firefox and installing again but the problem still persists. Somebody guide me on this.

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.

HT201250 i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. do i keep my files in the portable hard disk when I connect it again with the macbook or the time machine will era

i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard drive

Welcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

HT201210 In the attempt of updating the latest itune software, i am faced with the problem of not being able to be connected to itunes with my ipod touch that is blocked living the USB cable and the itune icons on my touch sceen. Can some one help me out

In the attempt of updating my ipod touch, i am faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks

See if placing the iPod in Recovery mode will allow a restore via iTunes
Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have a computer or iPod problem.

HT1338 Could you please help me with the problem. I have mac os 10.7.4 on my macbook pro retina and want to update it to 10.7.5. I had been waiting for 2 hours to do it, but then it appeared that it was impossible. What should I do?

Could you please help me with the problem. I have macbook with retina with mac os 10.7.4 ann want to update it to mac os 10.7.5. I had been waiting for 2 hours to do it and had tried 3 times but it appeared that it was impossible. What should I do?

You can download the standalone updates:
OS X Lion Update 10.7.5 (Client Combo)
OS X Lion 10.7.5 Supplemental Update

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

After upgrading to IOS 8 on my iPad I constantly get a temperature warning despite the fact it is cool. Did not happen with IOS 7. I have restored the iPad to factory settings with the problem not resolved.

Hey, I've got the same problem. Did you find any help or solution by now?

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

When I quit itunes it restarts again with the dot under the itunes logo but the iTunes window doesn't open until I click the icon on the dock. Also in the middle of the size vale in the size column the value starts with a number then a ? then a number.

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Mac forums.
Regards.

Will i have to do it all over again with the new ipod?

my ipod is super beat up and it's time for a new one, so i deleted all my itunes programs off of my computer and i've reinstalled them.
while i'm saving up money for a new ipod i wanted to go ahead and reimport all my songs into a library, once i do this am i able to just plug the new ipod into my computer and all of these songs will update and i'll be all set?
or will i have to do it all over again with the new ipod?

Once you have reinstated the tracks to your library, you'll able to sync your new iPod to it automatically and update it with the contents of your iTunes.

ITunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?

iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?

Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server.

I have searched for solutions to the error 13019, but everyone with the problem doe'st manually manage their music like I do. I really don't want to have to sync and gothrough that mess. Help? solution for manually managing videos and music!!

I have searched for solutions to the error 13019, but everyone with the problem doesn't manually manage their music like I do. I really don't want to have to sync and go through that mess. Please Help! solution for manually managing videos and music!!

- Make an appointment at the Genius Bar of an Apple store and hear what they hae to say. It is free.
Apple Retail Store - Genius Bar
you can turn on Assistive Touch it adds the Power and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch

Again with the problems

Similar Messages

Maybe you are looking for