Ageing wise vendor  and customer report

hi....
Where i can get ageing wise vendor  and customer report?
Thanks & Regards
Rekha shrama

Hello
First configure credit management & customise.
A/R Summary
Degree of ageing
You can set the allowed degree of ageing in Customizing for Sales, under Basic Functions ® Credit Management/Risk Management ® Credit Management ® Define Automatic Credit Control.
Under Checks in financial accounting/ old A/R summary, you can enter the permitted degree of ageing for the A/R summary, in the fíelds Permitted days and Permitted hours. Here, you can define how old the A/R summary can be, in order to be called up for a check. If the permitted degree of ageing for the A/R summary is exceeded in the credit check, then the document is blocked.
Fields allowed days and allowed hours are only available for entry if you have entered an X in field Read A/R Summary in Customizing. The path is: Accounts Receivable and Accounts ® Credit Management ® Credit Control Account ® Make basic settings for credit management.
Updating
The A/R summary is either sent periodically (with the help of the report RFCMCRCV) from central Financial Accounting to the decentralized Sales and Distribution units according to ALE distribution model or, if an obsolete A/R summary is presented, updated for the credit check by the system per remote function.
In order that the system is burdened as little as possible, SAP recommends you stick to the following order:
Program run: Incoming payments in central FI
Program run: Distribution A/R summary from central FI to decentralized Sales and Distribution units
Program run: Renewed credit check for blocked sales documents in decentralized Sales and Distribution units
Status Management for Obsolete A/R Summary
If the A/R summary is obsolete, the credit status Credit data obsolete is set. This means that the document is blocked, and appears in the credit representativeu2019s worklist. In Customizing for Sales, in the section Automatic Credit Control, for the single, aforementioned checks, for which FI data is necessary, you can define whether a warning appears in the obsolete data, or whether a status is set.
If you are working with the A/R summary, and would like to re-process obsolete data, it is recommended that you set a status.
Reg
suresh

Similar Messages

  • Vendor and customer report

    Is there any report which shows how much has been paid to vendors during a month and similarly received from the customers during the month?

    Hi,
    S_ALR_87012177 - Customer Payment History
    F.23 - Account Balances Customer
    S_ALR_87012085 - Vendor Payment History with OI Sorted List
    F.42 - Account Balances
    Hope this is clear if yes assign points.
    Regards,
    Sankar

  • AP REPORT AGE WISE, VENDOR WISE REQUIRED

    Hi,
    Please give me if there is any T-code to get the AGE wise VENDOR wise AP report at on go as we know the report code ( S_ALR_87012078 ) only for the same, in which, unless otherwise,  we go for drill down this report further, the report is being displayed for one vendor only and next we have to scroll to get the another vendor. This will not be helped to analysis in one paper.
    In view of the above, we need all your help to get the AP report with my above requirement in SAP Standard T-Code - if any,  ( or ) please confirm whether we need to go for development thro ABAP for the same.
    Please guide us immediately - if possible.
    Thanks
    G. Janarthanan

    Hi,
    Check this below reports for aging purpose for vendors
    S_ALR_87012084 Open Items - Vendor Due Date Forecast
    S_ALR_87012085 Vendor Payment History with OI Sorted List
    S_ALR_87012104 List of Cleared Vendor Items for Printing
    S_ALR_87012105 List of Down Payments Open On Key Date - Vendors
    Hope this helps. Do not forget to assign points if helpful
    regards,
    radhika
    Message was edited by:
            kolipara radhika

  • Profit centre needs to be updated in Vendor and Customer line item reports

    We are using ECC 6. 
    Profit centre is updating for vendor and customer line items in document level.  But the same is to be reflected/updated in profit centre field in FBL1N and Reports.

    hi
    Use this T codes you will get Profit center wise  S_AC0_52000888 Paybles (vendor balances )
    Tcode for Profit center wise receviables S_AC0_52000887  (customer balances )
    Regards
    Babu.k

  • Vendor and customer ageing analysis

    Hi Gurus
    i am in a project and my client wants vendors and customer  age vise analysis to be shown in balance sheet that's less than six months and more than six months  kindly help me for doing the same
    Thanks
    venkat

    hi,
    you can use SAP standard report. S_ALR_87012178 - Customer Open Item Analysis by Balance of Overdue Items. This gives an wide option by the customer where in you can choose the aging period by the day i.e. 10, 15, 20, 60, 90 days etc based on your requirement.
    when you perform your data migration make sure that the baseline date and payment terms are correct so the aging will be correct for the line items you load. You dont need to bring over cleared line items, as they wont affect the aging, all they will provide is payment behaviour.
    Some data migration projects assign a due immediately payment term and have the due date in the baseline date.
    Regards,
    Greeshma

  • Profit Center population in the Vendor and Customer Line items

    hello
    our client is asking for  getting profit center in the vendor and customer line items  where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
    but our business is not satisfied with the report and expecting report at profit center level.
    Can any one suggest any way of doing this.
    regards,
    Vijay

    Dear Vijay,
    Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
    1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
    2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
    3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
    4. This will help you to do the vendor line item wise selection in the FBL1N,  FBL5N profit center wise.
    Constraints of this solution:
    The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
    This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
    You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
    Regards,
    Bharathi.

  • Standard and customized reports

    Experts,
    I'm given a requirement to create some reports. Was hoping someone can help me with which are standard and customized reports from this list :
    OPEN PURCHASE ORDER REPORT
    OPEN REQUISITION REPORT
    OPEN RFQ REPORT
    PURCHASE ORDER CONFIRMATION REPORT
    STOCK ITEMS RE-ORDER
    STOCK ITEMS RESERVED
    STOCK ITEMS ABOVE STOCK MAX
    STOCK ITEMS BELOW STOCK MIN
    STOCK ITEMS DETAILS
    STOCK ITEMS INVENTORY CONTROL
    STOCK ITEMS LIST BY NUMBER
    STOCK ITEMS MOST USED
    STOCK ITEMS NOT USED
    STOCK ITEMS ORDER BY COST
    STOCK ITEMS ORDER BY LOCATION
    STOCK ITEMS ORDER BY VENDOR
    STOCK ITEMS OVER RESERVED
    STOCK ITEMS STATUS
    STOCK ITEMS VALUE
    VENDOR PERFORMANCE REPORT
    Regards,

    Hi,
    SAP Std. Reports     Description                                                                          Z-Dev
    ME2N / ME2M / ME2L     OPEN PURCHASE ORDER REPORT     
    ME5A                          OPEN REQUISITION REPORT     
    ME4N / ME4M / ME4L     OPEN RFQ REPORT     
    ME2A / VL06I     PURCHASE ORDER CONFIRMATION REPORT     
    MB53                          STOCK ITEMS RE-ORDER                                                     ABAP Report
    MB24 / MB25                          STOCK ITEMS RESERVED     
                              STOCK ITEMS ABOVE STOCK MAX                                ABAP Report
                              STOCK ITEMS BELOW STOCK MIN                                ABAP Report
    MMBE / MB52     STOCK ITEMS DETAILS     
    MC.1 / MC.9                           STOCK ITEMS INVENTORY CONTROL     
    MMBE / MB52     STOCK ITEMS LIST BY NUMBER     
    MC46                           STOCK ITEMS MOST USED     
    MC50                           STOCK ITEMS NOT USED     
    ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY COST     
    ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY LOCATION     
    ME2L                          STOCK ITEMS ORDER BY VENDOR     
    MB24/MB25                           STOCK ITEMS OVER RESERVED                                        ABAP Report
    MMBE/MB53                           STOCK ITEMS STATUS     
    MB52                           STOCK ITEMS VALUE     
    ME6H                           VENDOR PERFORMANCE REPORT     

  • Profit centerwise Vendor and Customer line items view

    Deal ALL,
    We have not activated Business Area.
    We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
    Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
    Request you all to reply.
    Thanks & Regards,
    Bhadresh

    Hi
    Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
    Assign Points if useful
    Regards
    Sanil

  • To update vendor and customer details in BP transaction

    I have created a donor in the BP transaction . i need to update the vendor and customer details for the reated donor.
    please can someone suggest some BAPI's or FM's which are available to do the same.

    Hello Om,
    You can get vendor/costumer number and their names in FBL3N when you get bank ledger's line item.
    You must use BTE functions.
    I don't your techinal skills about SAP but if you don't know ABAP or ABAP dictionary details, you can get help your ABAPer.
    I will explain step by step.
    First of all, if you don't use BTE before, You must create a product on FIBF.
    Call FIBF transaction -> Settings -> Products -> ...of a customer
    Create a new line,
    Product : ZFI
    Text : BTE Products for FI Exit
    Product active : tick check fro activation.
    Then you must call SE11 for structure RFPOS.
    You must use append structure function for this structure and you can define ZFI_RFPOS append structure.
    Define 4 fields.
    Component : KUNNR - Component type : KUNNR
    Component : NAMED - Component type : NAME1
    Component : LIFNR - Component type : LINFR
    Component : NAMEK - Component type : NAME1
    Then save and active your RFPOS structure.
    After that, you must do same step for structure RFPOSX.
    Then go to SE37 and copy from SAMPLE_INTERFACE_00001650 to ZFI_INTERFACE_00001650 FM.
    After copy action, you must uncomment this line on ZFI_INTERFACE_00001650 FM's source code. It's very very important;
    E_POSTAB = I_POSTAB.
    Then you should add some ABAP code for getting customer & vendor details.
    I give you some examples, you can use it. (next message on this thread, please check)
    Then save and active FM.
    Call FIBF transaction again.
    FIBF -> Settings -> Process Modules -> ...of a customer
    Define a new line.
    Process : 00001650
    Function Module : ZFI_INTERFACE_00001650
    Product : ZFI
    and this customizing.
    Then you go to SE38 transaction.
    start report RFPOSXEXTEND. After starting, a pop-up appears, you must click YES.
    After those operations, you can see customer/vendor code and their names on FBL3N.
    I hope it helps to you.
    Regards,
    Burak.

  • Clearing Vendor and Customer through F.13

    Hi.
    I was wondering if you can configure the vendor and customer masters so that they can be cleared automatically through transaction F.13. Currently this process is done through either F-32 or F-44 but this takes a lot of time.
    I would like to know if you can choose a vendor on F.13, a corresponding supplier and then clear them. I have run some tests but they have not been successful
    Is there any way to achieve this?
    I would appreciate detailed steps if there is a way to do this.
    Thank you very much,
    Borja.

    Hi Sunny,
    Please see the following :
    1. Down Payment Received (2500 INR.) F-29
    2. Customer Invoice Posted (2500 INR.) FB70
    3. Clear Down Payment (2500 INR) F-39
    4. Now Run Automatic Clearing (F.13)
    And then check the Customer line item report in FBL5N. It will clear both line items.
    Hope this helps.
    Kind Regards,
    Prakash Kumar

  • Tcode for Vendor and Customer Trial balance

    Hi,
    I want to generate Vendor trial balance & customer trial balance. I want name of each vendor and customer with the normal and special GL balance written against it
    Ex:
    Vendor A     -    Rs.100-
    Vendor B     -    Rs. 2300-
    Vendor C     -    Rs. 1000
    Total -- XXXXX -
    > This should match with my Vendor Reco account total.

    If standard report does not suffice your requirement, then create your own.
    FOR vendor USE K in transaction code instead of D.
    Hello,
    The following example I have given is for customers.
    The only difference is in transaction codes. For customer you go to FDI1, for vendor you go to FKI1 (reports).
    For Customer you go to FDI4, for vendor you go to FKI4 for forms.
    Remaining all are the same.
    Hello,
    Go to transaction code FDI4
    Select Form Type RFFRRD20 Line item analysis
    Give your form name and description
    Structure (Two axis) - as defaulted
    Click on Create
    You will have lead column
    Delete the rows 2, 3 and 4
    Double click on column 1
    Enter the customer numbers from 1 to 999999
    First column double click (A)
    Slelect following values
    Due date analysis 1
    Days for net due date 0 to 30
    Give the short name, medium name and long text for the column.
    Repeat this step in next columns like 31 to 60, 61 to 90, 91 to 120 and 121 to 99999 days etc in other columns and select due date analysis 1. (B,C,D,E)
    Create one more column by way of formula. To create a new column you need to double click on blue line. Put formula add all five columns you have created above. (F = ABCDE)
    You prepare one more column with
    Due date analysis 2 (G)
    Now you prepare one more column add (F+G) = This will be total open items = over due and not due.
    Now go to FDI1 and prepare a report - assign the form created in FDI4 to the report.
    Characteristics you need to select are
    Account Type (Select Account Type as D for customers)
    Currency
    Customer
    Document Type
    Special G/L Ind
    Company Code
    Change the output types and options according to your requirement.
    Refer FDI2 and FDI3 for other standard reports created.
    Refer FDI5 and FDI6 for other standard forms created.
    Save your report and execute.
    Regards,
    Ravi

  • Create items by vendor and customer on Foreign Currency Valuation

    When we execute Foreign Currency Valuation, we would like to create items in a document by vendor and customer.
    Can we handle it a 'Corp.group-vendors' flag(Evaluate Accounts According to Group Definition) ?
    Can you help with this issue please?
    Thanks,
    Sato.Ishikawa

    HI,
    With the report SAPF100, you will be able to valuate foreign currencies
    from customer and vendor accounts.
    It is not possible to post a foreign currency valuation directly to a
    vendor or customer account. This is only possible for g/l accounts.
    You can refer to the following workarounds:
    From the technical point of view you can use FB01 to post such a posting
    You have to enter a exchange rate manually in the first screen. In this
    case this exchange rate is used instead of the exhange rate of table
    TCURR (transaction OB08).
    You have to choose a exchange rate which transfer the amount in local
    currency to 0,00 in foreign currency.Another possibility is to use
    RFBIBL00 in transfer type direct input for FB01.An amount of 0 in
    foreign currency should work.
    The system is designed not to post documents with 0 amount in foreign
    currency to vendors/customers.
    Reg
    Madhu M

  • How can i clear the vendor and customer open line items at a time same vendor as a customer of the company (same vendor same customer and equal invoices )

    my vendor and customer are same . purchase invoice due100000 and sales invoice amount is also 100000 at a time with any manual action , have any setting for cleared both vendor and customer line items at a time ...........

    X Ltd. will be Vendor & Customer.
    Purchase Invoice is booked under Vendor SAP number & Sales Invoice is booked under Customer SAP number. Then you can transfer amount from Vendor to Customer or vice versa with T-code F-04.
    Then if you have transferred amount from customer to Vendor (F-04), Vendor account will have two entries Debit & Credit. Then go for clearance with T-code F-44 clear Vendor.

  • Printing confirmation of balance for vendors and customer-urgent

    Hi,
    Thanx Vamsi for the reply.
    I have got 1 more doubt.we are using CUSTOMISED correspondence types.The annexure we give has only the open items.But the users want a list of cleared items to appear in the list.
    Will the confirmation have only open items ???? or can it take even the cleared items along with it.Can the print program be modified to take even the cleared items along with it.
    Kindly advise.
    Thanks in advance
    Regards
    Karpagam

    Hi,
    We are using print program SAPF130K and SAPF130D for vendor and customer respectively.
    My query is can we bring even the cleared items alongwith the open items in the same print program???
    Now we have line items of open line items only?? As per our exploration into the program... we get only open items..
    Also we are using SAP10 and SAP11 as the correspondence type.Kindly advise as to correspondence type should be changed so that it can print both the open and cleared items?
    Please reply ASAP as it is very urgent.
    Thanks in advance.
    Regards
    Karpagam

  • Invoice image in vendor and customer document

    Hello,
    We have got following requirement.
    Currently we are storing pysical invoice copies of vendor and customer in a pysical file. But now we want to see the image of invoices in vendor and customer document respectively.
    It means, if it is possible to have an attachment button or some icon available when we see vendor and customer document.
    Please advise how can we link the pysical invoice with SAP document. And is this something related to DMS or Archivieng Link.
    Please suggest.
    Best Regards,
    Tapan

    Hi Tapan,
    At my company we are currently doing just this.
    We have a server outside of SAP that stores our images.  We did not want to store the images within SAP.
    We use the SAP document number to link the image to the SAP document.
    We do all our AP input from images. After an invoice is entered, and the document number is generated, we forward the image to a
    e mail address for the server using the document number in the subject line. The image gets attached to the document. Then the image can be viewed by clicking on the Services for object icon.
    I am sure there is some more techical stuff that goes this, like an RFC connection. I am sorry I am not technical. I am the functionala AP person. We also have a program that takes the image and attaches it to the cross company document if there is one.
    Hope this gives you some ideas.
    Alicia

Maybe you are looking for