Agent (10.2.0.5.0) on OEL is running, upload is not working

Hello,
I am installing boot/stage server for provisioning on Oracle Enterprise Linux, so I need to install Management Agent.
Agent is installed and running. But upload XML files is not working (last successful heartbeat to OMS: unknown).
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /home/oracle/OracleHomes/agent10g
Agent binaries : /home/oracle/OracleHomes/agent10g
Agent Process ID : 3141
Parent Process ID : 3122
Agent URL : https://localhost.localdomain:3872/emd/main/
Repository URL : https://xxx.xx.xx:1159/em/upload
Started at : 2009-12-10 11:00:13
Started by user : oracle
Last Reload : 2009-12-10 11:00:13
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 123
Size of XML files pending upload(MB) : 3.37
Available disk space on upload filesystem : 71.78%
Last attempted heartbeat to OMS : 2009-12-10 11:44:05
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
When issuing emctl upload agent receiving error:
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
When trying to secure, everything is fine:
Enter Agent Registration Password Agent successfully restarted... Done. Securing agent... Successful.
When trying to unsecure then getting:
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Checking Agent for HTTP... Done.
Agent successfully stopped... Done.
Unsecuring agent... Started.
OMS Upload URL - http://xxx.xx.xx:4889/em/upload/ is locked or unavailable.
Unsecuring Agent... Failed.
Agent successfully restarted... Done.
when trying to connect with telnet:
Trying 192.168.8.59...
Connected to xxx.xx.xx (192.168.8.59).
Escape character is '^]'.
then issued
^]
and received:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>501 Method Not Implemented</TITLE>
</HEAD><BODY>
<H1>Method Not Implemented</H1>
^] to /index.html not supported.<P>
Invalid method in request ^]<P>
<HR>
<ADDRESS>Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server Server at xxx.xx.xx Port 4889</ADDRESS>
</BODY></HTML>
Connection closed by foreign host.
And sample of emagent.trc imho regarding this situation:
2009-12-10 11:00:13,661 Thread-1173184 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
Help needed! What should I check? I am very new to Linux, maybe I missed something?
Waiting for any response,
Best regards,
Nikolajus
Edited by: Nikolajus on Dec 10, 2009 6:48 AM

Thanks for answering, Rob
My activity was:
On OMS:
[oracle@gc bin]$ ./emctl secure unlock
Oracle Enterprise Manager 10g Release 5 Grid Control
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
OMS Console is unlocked. HTTP ports too can be used to access console.
Agent Upload is unlocked. Unsecure Agents may upload over HTTP.
Then on boot_test:
./emctl unsecure agent (all completed without errors)
Then:
./emctl secure agent
Securing agent... Successful.
Then back to OMS:
[oracle@gc bin]$ ./emctl secure lock
Oracle Enterprise Manager 10g Release 5 Grid Control
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
OMS Console is locked. Access the console over HTTPS ports.
Agent Upload is locked. Agents must be secure and upload over HTTPS port.
Then on boot_test:
[oracle@boot_test bin]$ ./emctl stop agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Stopping agent ... stopped.
[oracle@boot_test bin]$ ./emctl start agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Starting agent ..... started.
[oracle@boot_test bin]$ ./emctl clearstate agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
[oracle@boot_test bin]$ ./emctl upload agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
And the status is:
[oracle@boot_test bin]$ ./emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /home/oracle/OracleHomes/agent10g
Agent binaries : /home/oracle/OracleHomes/agent10g
Agent Process ID : 29610
Parent Process ID : 29594
Agent URL : https://localhost.localdomain:3872/emd/main/
Repository URL : https://xxx.xx.xx:1159/em/upload
Started at : 2009-12-11 09:42:54
Started by user : oracle
Last Reload : 2009-12-11 09:42:54
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 78
Size of XML files pending upload(MB) : 3.84
Available disk space on upload filesystem : 71.95%
Last attempted heartbeat to OMS : 2009-12-11 09:51:01
Last successful heartbeat to OMS : unknown
Agent is Running and Ready
So, it seems nothing changed. Am I missing something? Waiting for any help!
Best regards,
Nikolajus

Similar Messages

SQL 2008 Agent - run batch file not working

Hello,
I am having some strange issues with a batch file running out of SQL agent I'm hoping I can get some help with.
The batch file's purpose is to send some log files to a SFTP server.
The job has been working great for the past 3 weeks, however this morning it stopped working. The job doesn't error out, however the entire job completes in 00:00:00 duration and I'm given the following message
Date 4/7/2014 3:38:00 PM
Log Job History (***Log Transfer)
Step ID 1
Server *******
Job Name **** Log Transfer
Step Name run batch
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: USERNAMERemoved . The step did not generate any output. Process Exit Code 0. The step succeeded.
The batch file looks like
echo *********************************
echo ** JOB EXECUTED %date% %time% **
if %errorlevel% neq 0 exit /b
C:
cd "C:\Program Files (x86)\WinSCP"
winscp /console /script=G:\Batch\LogTransfer.txt
call G:\Batch\LogTransfer2.bat
echo ** COMPLETED %date% %time% **
echo *********************************
I have numerous other batch jobs running on this server, no other job has had this issue. I have deleted and recreated both the job step and the entire job. I have recreated the batch files from scratch. I have also deleted the entire
contents of the batch file and just simply put in echo **** and still received the message so I'm near positive it has nothing to do with the actual batch file.
I have reset SQL Agent, as well rechecked that the SQL Agent account has run batch rights granted to it.
I moved the batch files to another folder, and they worked for about 4 runs until the same issue happened!!!
The job does execute 100% perfect if I run it manually via batch or if I kick it off starting the job out of SQL.
I am out of options here, does anyone have any ideas that could help me out?
Thanks,
Ryan

Hello,
Try to edit the step, and on the Advanced page of that step try to configure the job to create a log on the location you specify (Output file). Try to run the step again and examine the log created.
Could you try to change the owner of the job to “sa” or to your Windows account? Maybe the SQL Server Agent account does not have access
to the following folders:
G:\Batch\
C:\Program Files (x86)\WinSCP
Alternatively, you can try to create a proxy account.
http://technet.microsoft.com/en-US/library/ms190698(v=SQL.105).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Telnet session not working in OEL -5

Telnet session not working in OEL -5
==============================
1. Installed xinetd and telnet-server packages on the box.
2. Enabled the xinetd service.
# service xinetd start
# chkconfig xinetd on
Telnet still not working. Please help.
Lily.

Re-ran the /etc/init.d/xinetd restart command. Telnet cannot connect and this is what I get:
Unencrypted connection refused. Goodbye.
Below is the telnet.cfg
==================
# default: on
# description: The telnet server serves telnet sessions; it uses \
#     unencrypted username/password pairs for authentication.
service telnet
     flags          = REUSE
     socket_type     = stream
     wait          = no
     user          = root
     server          = /usr/sbin/in.telnetd
     log_on_failure     += USERID
     disable          = no
===================

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Alerts not working with direct agent?

I'm aware of
this issue with the SQL Intelligence pack and direct agents, which I'm also experiencing, but Alerts don't seem to be working with my direct agents either. I switched the handful of servers I had reporting under the old gateway model to direct agents
last week, and added 6 new direct agent servers, I know some of those new servers have the same hotfix alerts that I'm seeing from the old ones, but I have not received a new alert since 11/26 when I switched everything over, and when I login to the portal
and view alerts I receive:
"No gateway or SCOM management group detected. Op Insights required a gateway or SCOM management group in order to analyze data and generate alerts"
Followed by a link to the deployment guide, when I read the deployment guide for direct agents there no mention of an SCOM deployment requirement.
Any suggestions? Is anyone who is configured with direct agents successfully receiving alerts?

Indeed. Configuration Assessment 'alerts' are disabled with Direct Agent. Please look at the answer given here
https://social.msdn.microsoft.com/Forums/azure/en-US/8241918e-41f4-4429-9a5f-962e96908878/repeated-closed-alerts-emails-on-closed-alerts-in-opsinsight?forum=opinsights with regards to those 'alerts': we are moving away from 'alerts' for configuration-related
issues, and replacing them with those 'Recomendations' shapes (like the SQL Assessment). Those weren't 'alerts' in the first place - those were *proactive* recommendations. For new accounts with only Direct agents, those are not even produced and those screens
are unavailable. We think of 'Alerts' in the SCOM sense: server is down, needs immediate action even at 2am.
In this sense, we think of 'Alerts' as something that should be user-defined and based on searches where you can determine what to alert for, against any type of data - see this idea here
http://feedback.azure.com/forums/267889-azure-operational-insights/suggestions/6519198-long-running-saved-searches-or-scheduled-that-ca

Database Mail not working with SQL Server Agent

I'm running SQL Server 2005 Standard edition 64 bit with SP2 on a 64 bit machine.
Database mail does not work with SQL Server Agent. When I configure SQL Server Agent to use database mail the test email button is greyed out and inactive therefore I cannot send emails using operators or for jub success failure etc.
I've read that there was supposed to be a fix for this with SP1 but I have SP2 and still receive the same problem. Please can somebody help as I do not wish to use SQL Mail as a work around due to this becomming redundant in future versions of SQL Server.
Kind Regards

The problems solved
steps:
1)we create a mail profile at at Managment->Database Mail ,of SQL Managment
2)we set this account as "default" at Managment->Database Mail -> Configure Database Mail -> Manage profile security
3)At tab "Alert System" of SQL Server Agent properties , we check the "Enable mail profile" , Mail System=Database Mail, Mail profile = "the profile we already create"
4)we create a new operator at "Operators" of sql agent, where at "notification options" -> "Email name" we put the mail where we want to sent the agent the mails at failured job
5)We go at a specific job, at tab "Notifications" ,we check the "email" check box and then we choose the operator we just create, at the text box next to check box.
I hope not to forget something
Thank You all for the help

Out of Memory Error in Java Agents running in lotus notes

I have a java agent running inside lotus notes jvm. It runs fine for some days but after some days start giving out of memory error and terminates.
I need to restart agent manager in notes to enable java agent running. Is there a way to catch out of memory error so that on its catch i could restart agent manager.
Regards,
Saitu

Dear Peter,
The agent is written in java and
I need to know a way to enter catch block of 'OUTOFMEMORYERROR'.
My whole code is in a try block with two catches, one for outofmemoryerror and another for exception. When outofmemory error occurs control passes to the exception catch and not outofmemoryerror catch.
Since out of memory is an error and not an exception, is there a way to catch it or run some code when out of memory occurs.
Regards,
Saitu

Sql server agent not work

hi every one ,
i use sql server agent to make a job which delete some rows from my table at 12:00 AM
this job works on (Mydatabase1) but when i make another job to another database(Mydatabase2)
i get this error from ViewJob HIstory :
Myjob2,Error,1,FATMA\MSSQLSERVER2008,Myjob2,step2,,Executed as user: NT AUTHORITY\SYSTEM. DELETE
failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'. Verify that SET options are
correct for use with indexed views and/or indexes on computed columns and/or filtered indexes and/or query
notifications and/or XML data type methods and/or spatial index operations. [SQLSTATE 42000] (Error 1934). The step
failed
please inform me what is that error means?and how can i fix it?and why this job work to database and not work for another!!!
best wishes
fatma
fatma mohamed

Hi Miloslav Peterka,
i set Quoted Identifiers to true it was false,it woorked in first time after that i get this error(but in my worked job on myDatabase1 the Quoted Identifiers was false.)
Date  24-05-2010 10:44:28 ص
Log  Job History (AttendanceJob)
Step ID  0
Server  FATMA\MSSQLSERVER2008
Job Name  AttendanceJob
Step Name  (Job outcome)
Duration  00:00:01
Sql Severity  0
Sql Message ID  0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted  0
Message
The job failed. The Job was invoked by User sa. The last step to run was step 1 (attStep).
wat is the reason of that error?
best wishes
fatma mohamed

TREX sapccmsr agent not working

HI.
We have TREX7.0 system. In trex mmc sapccsr agent is not running. As per some guides we registered sapccmsr agent using sapccmsr pf=<instprofile> -j2ee -r to central solution manager system
in services sapccmsr agent is registerd and started but it is immediatly stopping. as per note 883361 i have executed Agent for J2EE and TREX instances:
sapccmsr pf=<instance profile> -j2ee -initshm but still we have same problem.
And how services sapccmsr and sapmmc(automatically available in trex mmc)ccmsr is mapped.

can you please check RFC status and also concern SM21 logentries.
regards
nag

Odi os command not working with agentservice agent.

dear all,
odi os command not working with agentservice agent but with local agent it work fine.. and user is administrator.
kindly solve it
Regards
Naseer

Hi,
you referred to oscommand, so are you executing a .bat fille? if yes, where exactly does the .bat file reside, local machine or on network share?
Also, follow these couple of documents, they may be helpful to you.
859215.1 and 424703.1
Regards
Srikanth

Oracle.odi.runtime.agent.invocation.InvocationException: ODI-1221: Unable to restart session 5002: session is not found in work repository WORKREP1

Hi,
I ran a scenario in ODI 11.1.1.5 and got the following error:
oracle.odi.runtime.agent.invocation.InvocationException: ODI-1221: Unable to restart session 5002: session is not found in work repository WORKREP

It could be the due to issue mentioned in support note
ODI-1221 Error When Executing Interface Or Package To Standalone Agent Running on OPMN (Doc ID 1482516.1)

UCCE Multiline Agent support not working

Hi all,
I enabled multi line support for agents on PG.... Restarted PGs...
And its not working, when agent recieves call on non-acd line, it doesn't go to not-ready...
Any hints?
Thank you
V

I found what was the problem
It didn't catch the change in configuration in PGs, Logs showed said single line for multiline settings...
I found a post from Geoff, where it said to exit_opc... and it worked...
And I checked all phones/lines 2-3 times before I was making a change
But thanx
V

Wrapup codes is not working in IP PHONE AGENT.

We performed all required configuration in CAD ADMIN/ICM Agent Desk Setting and It is working well in CAD Desktop Edition and Desktop-Browser Edition. But, it is not working in IP Phone Agent. All other IP Phone Agent functions is working properly except Wrapup code.
Based on CAD Documentation, this feature is supported in IP Phone Agent.
UCCE Version
UCM = 8.0
ICM = 8.0
IPIVR = 8.0
Thank you in advance

Can you post a screen shot of CDA showing the IPPA section.
david

Extended Notification not working for Dialog Task with agent assignment

Hi Friends,
I have an issue where I have a user decision step and a sub workflow contains a dialog task with agent assignment.
Extended notification is configured properly and is working properly for user decision step but its not working for the dialog task created as an activity.
Batch jobs are configured to run report SWN_SELSEN.
I was checking SDN and found this discussion handy :
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4f/3bed495cc018c8e10000000a42189e/content.htm
One thing that wonders me is that notifications show up in SOST 4-5 seconds before the user decision step starts execution.
See screenshot from SOST and WF log.
SOST log :
2 questions here: Why is notification not being sent for Dialog task?
Why is user decision notification being sent that early even before the User decision task starts execution?
Please provide your valuable inputs.
Regards,
Sandip

An activity step with agents is supported by the extended notifications if it is a decision task or not, I have used it many times and it works well just no approval/rejection links if it's not a decision task.
From your screenshot you can see that a mail has been created and is found in SOST, usually this cases are problems with the mail server or connection to it, check the mail settings in the SMTP node in transaction SCOT, also check with mail server team if there is a block to/from the SAP server.

12c Agent causes abrt full crash report on OEL 6.4 (64 bit)

We have a brand new server that we've installed OEL 6.4 x86_64 on with Oracle 11.2.0.3 and the 12c agent. Periodically I'm getting the following ABRT (Automatic Bug Report Tool) whenever the agent tries to run the "chkconfig --list" command. The oracle account does not have permission to execute the chkconfig command (that's the account the agent process is running under), however the agent periodically is trying to execute that for whatever reason.
Is there something I missed when I setup the oracle account?
Here's the top section of the abrt full crash report
abrt_version: 2.0.8
cgroup:
cmdline: /sbin/chkconfig --list
executable: /sbin/chkconfig
kernel: 2.6.39-400.17.1.el6uek.x86_64
pid: 63387
pwd: /opt/oracle/agent12c/agent_inst/sysman/emd
time: Thu 30 May 2013 04:22:36 PM EDT
uid: 500
username: oracle

I opened a SR on Tuesday of last week. My frustration level rose when their suggestion was to change permissions on the directories underneath /etc so the oracle account could do the “chkconfig –list”.
Changing permissions on core Linux directories isn't an acceptable answer for me. I was hoping someone else had run into this same problem and another solution.

Agent (10.2.0.5.0) on OEL is running, upload is not working

Similar Messages

Maybe you are looking for