Agent based release templates, hard coded values configurable?

My Release templates consists of couple of hard coded values like Installation Path, documents folder paths etc. To create a new template, i need to change those values in so many places and it's very time consuming for bigger templates.
I have implemented agent based release and my questions are:
1. Is it possible to configure such values with variables in the scope of each stages of releases like QA, Staging, Production etc.
2. What is the difference between agent based release templates and vNext templates.
Sreekanth Mohan

Hi Sreekanth,
Thanks for your reply.
If there’s may Stages in your release template, I think you can create/edit the correct action steps in one Stage, then copy them to other Stages in your release template.
Or you can try to use the Tag feature in your release template if you will do the same deploy in multiple servers, please refer to the helpful information in this article:
http://www.incyclesoftware.com/2014/02/new-feature-release-management-visual-studio-update-2-server-tags/.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

[svn] 2093: fix air-config. xml so that there are no hard-coded values for the build number.

Revision: 2093
Author: [email protected]
Date: 2008-06-16 12:57:18 -0700 (Mon, 16 Jun 2008)
Log Message:
fix air-config.xml so that there are no hard-coded values for the build number. This gets updated from the root build.xml by using a combination of a value from build.properties, release.version, and a value passed into build.xml build.number.
partial fix for sdk-15812
Ticket Links:
http://bugs.adobe.com/jira/browse/sdk-15812
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/air-config.xml

I need to add just one more thing and that is on battery life. Last night I sat with the rMBP on my lap installing software, surfing the web, answering emails for close to 4 and 1/2 hours. At the point I took it back to the charger it still was showing a computed battery time remaining of 3.5 hours.
Today I had two VMs open and took the machine of the charger and sat outside with my dogs for about 30 minutes. During this time I was working in both VMs, editing and compiling code. My battery life estimate showed a good solid 4 hours.
This is roughly 6 times greater than what I had with my 2010 MBP and it too had a SSD. I am not sure why but this retina MBP just seems to not work as hard doing anything that caused my 2010 MBP to struggle.
While the battery life is certainly better than I expected it is clear that load can change that very rapidly. So I think I still need to visit clients with an external battery or charger in hand. But I don't think I will be quite so scared that my laptop will simply run out of power before I can even get it plugged in.

Hard coded values in ADF 11g

i want to insert hard coded values through ADF form..
kindly help me in this
Thanks in Advance
VL Naidu

Thanks john and Grant..
i have another issue now..
i have created the Edit form and a table
giving partial trigger for form to table..
so wen i select the row the corresponding row values will be displayed in the Edit form.
but i want to show a Empty form on page load and after data insertion.
i tried in refresh condition .but nothing worked.
can u help me in this issue.
Thanks in Advance
VL Naidu

How could I replace hard coded value in my sql query with constant value?

Hi all,
Could anyone help me how to replace hardcoded value in my sql query with constant value that might be pre defined .
PROCEDURE class_by_day_get_bin_data
 in_report_parameter_id IN NUMBER,
 in_site_id IN NUMBER,
 in_start_date_time IN TIMESTAMP,
 in_end_date_time IN TIMESTAMP,
 in_report_level_min IN NUMBER,
 in_report_level_max IN NUMBER
IS
bin_period_length NUMBER(6,0);
BEGIN
SELECT MAX(period_length)
 INTO bin_period_length
 FROM bin_data
 JOIN site_to_data_source_lane_v
 ON bin_data.data_source_id = site_to_data_source_lane_v.data_source_id
 JOIN bin_types
 ON bin_types.bin_type = bin_data.bin_type
 WHERE site_to_data_source_lane_v.site_id = in_site_id
 AND bin_data.start_date_time >= in_start_date_time - numtodsinterval(1, 'DAY')
 AND bin_data.start_date_time < in_end_date_time + numtodsinterval(1, 'DAY')
 AND bin_data.bin_type = 2
 AND bin_data.period_length <= 60;
--Clear the edr_class_by_day_bin_data temporary table and populate it with the data for the requested
--report.
DELETE FROM edr_class_by_day_bin_data;
 SELECT site_to_data_source_lane_v.site_id,
 site_to_data_source_lane_v.site_lane_id,
 site_to_data_source_lane_v.site_direction_id,
 site_to_data_source_lane_v.site_direction_name,
 bin_data_set.start_date_time,
 bin_data_set.end_date_time,
 bin_data_value.bin_id,
 bin_data_value.bin_value
 FROM bin_data
 JOIN bin_data_set
 ON bin_data.bin_serial = bin_data_set.bin_serial
 JOIN bin_data_value
 ON bin_data_set.bin_data_set_serial = bin_data_value.bin_data_set_serial
 JOIN site_to_data_source_lane_v
 ON bin_data.data_source_id = site_to_data_source_lane_v.data_source_id
 AND bin_data_set.lane = site_to_data_source_lane_v.data_source_lane_id
 JOIN (
 SELECT CAST(report_parameter_value AS NUMBER) lane_id
 FROM report_parameters
 WHERE report_parameters.report_parameter_id = in_report_parameter_id
 AND report_parameters.report_parameter_group = 'LANE'
 AND report_parameters.report_parameter_name = 'LANE'
 ) report_lanes
 ON site_to_data_source_lane_v.site_lane_id = report_lanes.lane_id
 JOIN (
 SELECT CAST(report_parameter_value AS NUMBER) class_id
 FROM report_parameters
 WHERE report_parameters.report_parameter_id = in_report_parameter_id
 AND report_parameters.report_parameter_group = 'CLASS'
 AND report_parameters.report_parameter_name = 'CLASS'
 ) report_classes
 ON bin_data_value.bin_id = report_classes.class_id
 JOIN edr_rpt_tmp_inclusion_table
 ON TRUNC(bin_data_set.start_date_time) = TRUNC(edr_rpt_tmp_inclusion_table.date_time)
 WHERE site_to_data_source_lane_v.site_id = in_site_id
 AND bin_data.start_date_time >= in_start_date_time - numtodsinterval(1, 'DAY')
 AND bin_data.start_date_time < in_end_date_time + numtodsinterval(1, 'DAY')
 AND bin_data_set.start_date_time >= in_start_date_time
 AND bin_data_set.start_date_time < in_end_date_time
 AND bin_data.bin_type = 2
 AND bin_data.period_length = bin_period_length;
END class_by_day_get_bin_data;In the above code I'm using the hard coded value 2 for bin type
bin_data.bin_type = 2But I dont want any hard coded number or string in the query.
How could I replace it?
I defined conatant value like below inside my package body where the actual procedure comes.But I'm not sure whether I have to declare it inside package body or inside the procedure.
bin_type CONSTANT NUMBER := 2;But it does't look for this value. So I'm not able to get desired value for the report .
Thanks.
Edited by: user10641405 on May 29, 2009 1:38 PM

Declare the constant inside the procedure.
PROCEDURE class_by_day_get_bin_data(in_report_parameter_id IN NUMBER,
 in_site_id IN NUMBER,
 in_start_date_time IN TIMESTAMP,
 in_end_date_time IN TIMESTAMP,
 in_report_level_min IN NUMBER,
 in_report_level_max IN NUMBER) IS
bin_period_length NUMBER(6, 0);
v_bin_type CONSTANT NUMBER := 2;
BEGIN
SELECT MAX(period_length)
 INTO bin_period_length
 FROM bin_data
 JOIN site_to_data_source_lane_v ON bin_data.data_source_id =
 site_to_data_source_lane_v.data_source_id
 JOIN bin_types ON bin_types.bin_type = bin_data.bin_type
 WHERE site_to_data_source_lane_v.site_id = in_site_id
 AND bin_data.start_date_time >=
 in_start_date_time - numtodsinterval(1, 'DAY')
 AND bin_data.start_date_time <
 in_end_date_time + numtodsinterval(1, 'DAY')
 AND bin_data.bin_type = v_bin_type
 AND bin_data.period_length <= 60;
--Clear the edr_class_by_day_bin_data temporary table and populate it with the data for the requested
--report.
DELETE FROM edr_class_by_day_bin_data;
INSERT INTO edr_class_by_day_bin_data
 (site_id,
 site_lane_id,
 site_direction_id,
 site_direction_name,
 bin_start_date_time,
 bin_end_date_time,
 bin_id,
 bin_value)
 SELECT site_to_data_source_lane_v.site_id,
 site_to_data_source_lane_v.site_lane_id,
 site_to_data_source_lane_v.site_direction_id,
 site_to_data_source_lane_v.site_direction_name,
 bin_data_set.start_date_time,
 bin_data_set.end_date_time,
 bin_data_value.bin_id,
 bin_data_value.bin_value
 FROM bin_data
 JOIN bin_data_set ON bin_data.bin_serial = bin_data_set.bin_serial
 JOIN bin_data_value ON bin_data_set.bin_data_set_serial =
 bin_data_value.bin_data_set_serial
 JOIN site_to_data_source_lane_v ON bin_data.data_source_id =
 site_to_data_source_lane_v.data_source_id
 AND bin_data_set.lane =
 site_to_data_source_lane_v.data_source_lane_id
 JOIN (SELECT CAST(report_parameter_value AS NUMBER) lane_id
 FROM report_parameters
 WHERE report_parameters.report_parameter_id =
 in_report_parameter_id
 AND report_parameters.report_parameter_group = 'LANE'
 AND report_parameters.report_parameter_name = 'LANE') report_lanes ON site_to_data_source_lane_v.site_lane_id =
 report_lanes.lane_id
 JOIN (SELECT CAST(report_parameter_value AS NUMBER) class_id
 FROM report_parameters
 WHERE report_parameters.report_parameter_id =
 in_report_parameter_id
 AND report_parameters.report_parameter_group = 'CLASS'
 AND report_parameters.report_parameter_name = 'CLASS') report_classes ON bin_data_value.bin_id =
 report_classes.class_id
 JOIN edr_rpt_tmp_inclusion_table ON TRUNC(bin_data_set.start_date_time) =
 TRUNC(edr_rpt_tmp_inclusion_table.date_time)
 WHERE site_to_data_source_lane_v.site_id = in_site_id
 AND bin_data.start_date_time >=
 in_start_date_time - numtodsinterval(1, 'DAY')
 AND bin_data.start_date_time <
 in_end_date_time + numtodsinterval(1, 'DAY')
 AND bin_data_set.start_date_time >= in_start_date_time
 AND bin_data_set.start_date_time < in_end_date_time
 AND bin_data.bin_type = v_bin_type
 AND bin_data.period_length = bin_period_length;
END class_by_day_get_bin_data;

How to mention User specific fileshare as Hard coded value in DB table

I have a scenario like whenever the user clicks on Print, the application will generate a temp file Temp.txt and place it in fileshare location that is given in Database hard coded value as C:\Test, The problem here is when more than one user clicks on print button, the second user is getting error, as the same file is being used by first user.
To save the temp file, I want to mention a locaton something like "C:\Documents and Settings\<User Id>" where <user Id> will be '0001' for user one and '0002' for user two. (0001 and 0002 are suppose to be the user login name within the organisation). Is there anyway to specify the user id of the active user as a hard coded value?

take the output of select user from dual; in a variable and then append that either with file name or with directory location..

Query runs slower when using variables & faster when using hard coded value

Hi,
My query runs slower when i use variables but it runs faster when i use hard coded values. Why it is behaving like this ?
My query is in cursor definition in a procedure. Procedure runs faster when using hard coded valus and slower when using variables.
Can anybody help me out there?
Thanks in advance.

Hi,
Thanks for ur reply.
here is my code with Variables:
Procedure populateCountryTrafficDetails(pWeekStartDate IN Date , pCountry IN d_geography.country_code%TYPE) is
startdate date;
AR_OrgId number(10);
Cursor cTraffic is
Select
 l.actual_date, nvl(o.city||o.zipcode,'Undefined') Site,
 g.country_code,d.customer_name, d.customer_number,t.contrno bcn,
 nvl(r.dest_level3,'Undefined'),
 Decode(p.Product_code,'820','821','821','821','801') Product_Code ,
 Decode(p.Product_code,'820','Colt Voice Connect','821','Colt Voice Connect','Colt Voice Line') DProduct,
 sum(f.duration),
 sum(f.debamount_eur)
 from d_calendar_date l,
 d_geography g,
 d_customer d, d_contract t, d_subscriber s,
 d_retail_dest r, d_product p,
 CPS_ORDER_DETAILS o,
 f_retail_revenue f
 where
 l.date_key = f.call_date_key and
 g.geography_key = f.geography_key and
 r.dest_key = f.dest_key and
 p.product_key = f.product_key and
 --c.customer_key = f.customer_key and
 d.customer_key = f.customer_key and
 t.contract_key = f.contract_key and
 s.SUBSCRIBER_KEY = f.SUBSCRIBER_KEY and
 o.org_id(+) = AR_OrgId and
 g.country_code = pCountry and
 l.actual_date >= startdate and
 l.actual_date <= (startdate + 90) and
 o.cli(+) = s.area_subno and
 p.product_code in ('800','801','802','804','820','821')
 group by
 l.actual_date,
 o.city||o.zipcode, g.country_code,d.customer_name, d.customer_number,t.contrno,r.dest_level3, p.product_code;
Type CountryTabType is Table of country_traffic_details.Country%Type index by BINARY_INTEGER;
Type CallDateTabType is Table of country_traffic_details.CALL_DATE%Type index by BINARY_INTEGER;
Type CustomerNameTabType is Table of Country_traffic_details.Customer_name%Type index by BINARY_INTEGER;
Type CustomerNumberTabType is Table of Country_traffic_details.Customer_number%Type index by BINARY_INTEGER;
Type BcnTabType is Table of Country_traffic_details.Bcn%Type index by BINARY_INTEGER;
Type DestinationTypeTabType is Table of Country_traffic_details.DESTINATION_TYPE%Type index by BINARY_INTEGER;
Type ProductCodeTabType is Table of Country_traffic_details.Product_Code%Type index by BINARY_INTEGER;
Type ProductTabType is Table of Country_traffic_details.Product%Type index by BINARY_INTEGER;
Type DurationTabType is Table of Country_traffic_details.Duration%Type index by BINARY_INTEGER;
Type DebamounteurTabType is Table of Country_traffic_details.DEBAMOUNTEUR%Type index by BINARY_INTEGER;
Type SiteTabType is Table of Country_traffic_details.Site%Type index by BINARY_INTEGER;
CountryArr CountryTabType;
CallDateArr CallDateTabType;
Customer_NameArr CustomerNameTabType;
CustomerNumberArr CustomerNumberTabType;
BCNArr BCNTabType;
DESTINATION_TYPEArr DESTINATIONTYPETabType;
PRODUCT_CODEArr PRODUCTCODETabType;
PRODUCTArr PRODUCTTabType;
DurationArr DurationTabType;
DebamounteurArr DebamounteurTabType;
SiteArr SiteTabType;
Begin
 startdate := (trunc(pWeekStartDate) + 6) - 90;
 Exe_Pos := 1;
 Execute Immediate 'Truncate table country_traffic_details';
 dropIndexes('country_traffic_details');
 Exe_Pos := 2;
 /* Set org ID's as per AR */
 case (pCountry)
 when 'FR' then AR_OrgId := 81;
 when 'AT' then AR_OrgId := 125;
 when 'CH' then AR_OrgId := 126;
 when 'DE' then AR_OrgId := 127;
 when 'ES' then AR_OrgId := 123;
 when 'IT' then AR_OrgId := 122;
 when 'PT' then AR_OrgId := 124;
 when 'BE' then AR_OrgId := 132;
 when 'IE' then AR_OrgId := 128;
 when 'DK' then AR_OrgId := 133;
 when 'NL' then AR_OrgId := 129;
 when 'SE' then AR_OrgId := 130;
 when 'UK' then AR_OrgId := 131;
 else raise_application_error (-20003, 'No such Country Code Exists.');
 end case;
 Exe_Pos := 3;
dbms_output.put_line('3: '||to_char(sysdate, 'HH24:MI:SS'));
 populateOrderDetails(AR_OrgId);
dbms_output.put_line('4: '||to_char(sysdate, 'HH24:MI:SS'));
 Exe_Pos := 4;
 Open cTraffic;
 Loop
 Exe_Pos := 5;
 CallDateArr.delete;
FETCH cTraffic BULK COLLECT
 INTO CallDateArr, SiteArr, CountryArr, Customer_NameArr,CustomerNumberArr,
 BCNArr,DESTINATION_TYPEArr,PRODUCT_CODEArr, PRODUCTArr, DurationArr, DebamounteurArr LIMIT arraySize;
 EXIT WHEN CallDateArr.first IS NULL;
 Exe_pos := 6;
 FORALL i IN 1..callDateArr.last
 insert into country_traffic_details
 values(CallDateArr(i), CountryArr(i), Customer_NameArr(i),CustomerNumberArr(i),
 BCNArr(i),DESTINATION_TYPEArr(i),PRODUCT_CODEArr(i), PRODUCTArr(i), DurationArr(i),
 DebamounteurArr(i), SiteArr(i));
 Exe_pos := 7;
dbms_output.put_line('7: '||to_char(sysdate, 'HH24:MI:SS'));
 EXIT WHEN ctraffic%NOTFOUND;
END LOOP;
 commit;
Exe_Pos := 8;
 commit;
dbms_output.put_line('8: '||to_char(sysdate, 'HH24:MI:SS'));
 lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_CUSTNO ON country_traffic_details (CUSTOMER_NUMBER)';
 execDDl(lSql);
 lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_BCN ON country_traffic_details (BCN)';
 execDDl(lSql);
 lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_PRODCD ON country_traffic_details (PRODUCT_CODE)';
 execDDl(lSql);
 lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_SITE ON country_traffic_details (SITE)';
 execDDl(lSql);
 lSql := 'CREATE INDEX COUNTRY_TRAFFIC_DETAILS_DESTYP ON country_traffic_details (DESTINATION_TYPE)';
 execDDl(lSql);
 Exe_Pos:= 9;
dbms_output.put_line('9: '||to_char(sysdate, 'HH24:MI:SS'));
Exception
 When Others then
 raise_application_error(-20003, 'Error in populateCountryTrafficDetails at Position: '||Exe_Pos||' The Error is '||SQLERRM);
End populateCountryTrafficDetails;
In the above procedure if i substitute the values with hard coded values i.e. AR_orgid = 123 & pcountry = 'Austria' then it runs faster.
Please let me know why it is so ?
Thanks in advance.

Master Data with Hard coded value

Hi,
I have a Report with 3 columns
2nd & 3rd columns are the Master Data(0COMP_CODE)
1st column is Hard coded value, This value is not stored any where (For example: 010)
If I want to create a Report with these 3 columns, how should I proceed.
any good Idea.
Thanks
Priya

Hi Roberto,
Thanks for the Quick Response.
I don't forgot to Reward the points.
I am Extracting Data From R/3 .
and I want a Report Like
For Example
 col1 col2 col3
 0100 xyzz abcd
 0100 xyxx dfcd
 0100 yxzz bcds
col2 & col3 has 0comp_code_attr & 0comp_code_text
column 1 is hard coded value
let us assum for all records we can display 0100
how it is possible
Thnks
Priya

Native SQL Performance Difference Between Hard-Coded Value and Parameter

Hi,
I have a native SQL (Oracle) query (fairly long & complex with a few sub-queries) that returns in under a second in both ODSI and using an external SQL tool. This query has a hard-coded value for a particular column, namely, a date column.
When I modify the ODSI function signature so that I pass in a parameter and then replace the hard-coded value in the native SQL with the appropriate parameter binding notation (i.e. '?'), the query takes much longer (2-30 seconds). The duration of the query depends on how many records are actually returned, so it must be running a separate query for each of the results (i.e. the more results returned, the longer the query takes to return).
What can I do to keep the duration of my ODSI query low while allowing for the parameter?

OSDI plan with date parameter:
<?xml version="1.0"?>
<source ns="fn-bea" name="jdbc.wcb.fineos" kind="relational" tip="jdbc.wcb.fineos">
<![CDATA[select codeid, description, FEE_CODE_DOC_TYPE, ismax, isovr
from
select distinct
sd.codeid, sd.description,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-MAX (MAXIMUM AMOUNT)'
) ISMAX,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-OVR (Overrideable)'
ISOVR,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-INT (Internet Enterable)'
ISINT
,trow.answerstr FEE_CODE_DOC_TYPE
from wcbapp.tocorganisation o, wcbapp.tolpartydetails pd, wcbapp.tolserviceagrmtforprovider safp,
wcbapp.tolserviceagreement sa, wcbapp.tolserviceagreementversion sav, wcbapp.rsrvchrgrsrvagrvrserviceagreem scg_sav,
wcbapp.tolservicechargegroup scg, wcbapp.tolservicechargegroupversion scgv, wcbapp.tolserviceprovisionagreement spa,
wcbapp.tolservicedefinition sd
,wcbapp.trow trow, wcbapp.tlookupversion tlookupversion, wcbapp.tlookup tlookup
where
trow.i_lkpver_rows = tlookupversion.i
and trow.c_lkpver_rows = tlookupversion.c
and tlookupversion.i_lookup_versions = tlookup.i
and tlookupversion.c_lookup_versions = tlookup.c
and sd.codeid = trow.minstr_1
and sd.codeid = trow.maxstr_1
and tlookup.name = 'FeeCodeToDocumentLookup' and
spa.i_service_serviceratede = sd.i and
spa.c_service_serviceratede = sd.c and
spa.i_srchrgrv_serviceratede = scgv.i and
spa.c_srchrgrv_serviceratede = scgv.c and
scgv.i_srvchrgr_servicecharge = scg.i and
scgv.c_srvchrgr_servicecharge = scg.c and
scg.i = scg_sav.i_from and
scg.c = scg_sav.c_from and
scg_sav.i_to = sav.i and
scg_sav.c_to = sav.c and
sav.i_srvcagrm_serviceagreem = sa.i and
sav.c_srvcagrm_serviceagreem = sa.c and
sa.i = safp.i_srvcagrm_provider and
sa.c = safp.c_srvcagrm_provider and
safp.i_prtdtls_serviceagreem = pd.i and
safp.c_prtdtls_serviceagreem = pd.c and
pd.i_ocprty_party = o.i and
pd.c_ocprty_party = o.c and
? between safp.effectivedate and safp.enddate and
o.customerno = ? || ?
order by sd.codeid
where ISINT = 1]]>
<variable name="__fparam0" kind="EXTERNAL">
</variable>
<variable name="__fparam1" kind="EXTERNAL">
</variable>
<variable name="__fparam2" kind="EXTERNAL">
</variable>
</source>
OSDI plan with date constant:
<?xml version="1.0"?>
<source ns="fn-bea" name="jdbc.wcb.fineos" kind="relational" tip="jdbc.wcb.fineos">
<![CDATA[select codeid, description, FEE_CODE_DOC_TYPE, ismax, isovr
from
select distinct
sd.codeid, sd.description,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-MAX (MAXIMUM AMOUNT)'
) ISMAX,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-OVR (Overrideable)'
ISOVR,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-INT (Internet Enterable)'
ISINT
,trow.answerstr FEE_CODE_DOC_TYPE
from wcbapp.tocorganisation o, wcbapp.tolpartydetails pd, wcbapp.tolserviceagrmtforprovider safp,
wcbapp.tolserviceagreement sa, wcbapp.tolserviceagreementversion sav, wcbapp.rsrvchrgrsrvagrvrserviceagreem scg_sav,
wcbapp.tolservicechargegroup scg, wcbapp.tolservicechargegroupversion scgv, wcbapp.tolserviceprovisionagreement spa,
wcbapp.tolservicedefinition sd
,wcbapp.trow trow, wcbapp.tlookupversion tlookupversion, wcbapp.tlookup tlookup
where
trow.i_lkpver_rows = tlookupversion.i
and trow.c_lkpver_rows = tlookupversion.c
and tlookupversion.i_lookup_versions = tlookup.i
and tlookupversion.c_lookup_versions = tlookup.c
and sd.codeid = trow.minstr_1
and sd.codeid = trow.maxstr_1
and tlookup.name = 'FeeCodeToDocumentLookup' and
spa.i_service_serviceratede = sd.i and
spa.c_service_serviceratede = sd.c and
spa.i_srchrgrv_serviceratede = scgv.i and
spa.c_srchrgrv_serviceratede = scgv.c and
scgv.i_srvchrgr_servicecharge = scg.i and
scgv.c_srvchrgr_servicecharge = scg.c and
scg.i = scg_sav.i_from and
scg.c = scg_sav.c_from and
scg_sav.i_to = sav.i and
scg_sav.c_to = sav.c and
sav.i_srvcagrm_serviceagreem = sa.i and
sav.c_srvcagrm_serviceagreem = sa.c and
sa.i = safp.i_srvcagrm_provider and
sa.c = safp.c_srvcagrm_provider and
safp.i_prtdtls_serviceagreem = pd.i and
safp.c_prtdtls_serviceagreem = pd.c and
pd.i_ocprty_party = o.i and
pd.c_ocprty_party = o.c and
'01-MAY-11' between safp.effectivedate and safp.enddate and
o.customerno = ? || ?
order by sd.codeid
where ISINT = 1]]>
<variable name="__fparam0" kind="EXTERNAL">
</variable>
<variable name="__fparam1" kind="EXTERNAL">
</variable>
</source>
ODSI Audit with date parameter:
[Thu May 12 13:02:23 GMT-06:00 2011] Starting...
Query compilation time: 0 ms
Query evaluation time: 16142 ms
Operation duration: 16189 ms
Audit Event:
common/application
user: weblogic
name: ClaimsDataspace
server: AdminServer
eventkind: evaluation
query/cache/queryplan
found: false
type: XQUERY_PLAN_CACHE
query/cache/queryplan
type: XQUERY_PLAN_CACHE
inserted: true
query/performance
compiletime: 0
common/session/query/invocation
time: Thu May 12 13:02:07 GMT-06:00 2011
blocksize: 65536
duration: 16001
common/session/query/invocation
time: Thu May 12 13:02:23 GMT-06:00 2011
blocksize: 65536
duration: 47
common/session/query/invocation
time: Thu May 12 13:02:23 GMT-06:00 2011
blocksize: 65536
duration: 46
common/session/query/invocation
time: Thu May 12 13:02:23 GMT-06:00 2011
blocksize: 35779
duration: 16
query/wrappers/relational
source: jdbc.wcb.fineos
sql:
select codeid, description, FEE_CODE_DOC_TYPE, ismax, isovr
from
select distinct
sd.codeid, sd.description,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-MAX (MAXIMUM AMOUNT)'
) ISMAX,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-OVR (Overrideable)'
ISOVR,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-INT (Internet Enterable)'
ISINT
,trow.answerstr FEE_CODE_DOC_TYPE
from wcbapp.tocorganisation o, wcbapp.tolpartydetails pd, wcbapp.tolserviceagrmtforprovider safp,
wcbapp.tolserviceagreement sa, wcbapp.tolserviceagreementversion sav, wcbapp.rsrvchrgrsrvagrvrserviceagreem scg_sav,
wcbapp.tolservicechargegroup scg, wcbapp.tolservicechargegroupversion scgv, wcbapp.tolserviceprovisionagreement spa,
wcbapp.tolservicedefinition sd
,wcbapp.trow trow, wcbapp.tlookupversion tlookupversion, wcbapp.tlookup tlookup
where
trow.i_lkpver_rows = tlookupversion.i
and trow.c_lkpver_rows = tlookupversion.c
and tlookupversion.i_lookup_versions = tlookup.i
and tlookupversion.c_lookup_versions = tlookup.c
and sd.codeid = trow.minstr_1
and sd.codeid = trow.maxstr_1
and tlookup.name = 'FeeCodeToDocumentLookup' and
spa.i_service_serviceratede = sd.i and
spa.c_service_serviceratede = sd.c and
spa.i_srchrgrv_serviceratede = scgv.i and
spa.c_srchrgrv_serviceratede = scgv.c and
scgv.i_srvchrgr_servicecharge = scg.i and
scgv.c_srvchrgr_servicecharge = scg.c and
scg.i = scg_sav.i_from and
scg.c = scg_sav.c_from and
scg_sav.i_to = sav.i and
scg_sav.c_to = sav.c and
sav.i_srvcagrm_serviceagreem = sa.i and
sav.c_srvcagrm_serviceagreem = sa.c and
sa.i = safp.i_srvcagrm_provider and
sa.c = safp.c_srvcagrm_provider and
safp.i_prtdtls_serviceagreem = pd.i and
safp.c_prtdtls_serviceagreem = pd.c and
pd.i_ocprty_party = o.i and
pd.c_ocprty_party = o.c and
? between safp.effectivedate and safp.enddate and
o.customerno = ? || ?
order by sd.codeid
where ISINT = 1
parameters:
2011-05-01T00:00:00
DOC
007492
time: 16048
rows: 1967
query/performance
evaltime: 16142
query/service
result:
*** removed due to length ***
query/service
function: getFeeCodeByCaregiverEffectiveDate1
arity: 3
dataservice: ld:org/wcb/claims/payment/FINEOS/physical/SQL.ds
query:
import schema namespace t1 = "http://www.test.com/claims/payment" at "ld:org/wcb/claims/payment/FINEOS/physical/schemas/SQL.xsd";
declare namespace ns0="ld:org/wcb/claims/payment/FINEOS/physical/SQL";
declare namespace ns1="http://www.w3.org/2001/XMLSchema";
declare variable $__fparam0 as ns1:dateTime external;
declare variable $__fparam1 as ns1:string external;
declare variable $__fparam2 as ns1:string external;
fn:subsequence(
for $FeeCode3 in ns0:getFeeCodeByCaregiverEffectiveDate1($__fparam0,$__fparam1,$__fparam2)
 return
 $FeeCode3
,1,5000)
parameters:
2011-05-01T00:00:00
DOC
007492
common/time
duration: 16189
timestamp: Thu May 12 13:02:07 GMT-06:00 2011
[Thu May 12 13:02:23 GMT-06:00 2011] End
ODSI Audit with date constant:
[Thu May 12 13:10:00 GMT-06:00 2011] Starting...
Query compilation time: 0 ms
Query evaluation time: 359 ms
Operation duration: 375 ms
Audit Event:
common/application
user: weblogic
name: ClaimsDataspace
server: AdminServer
eventkind: evaluation
query/cache/queryplan
found: true
type: XQUERY_PLAN_CACHE
query/performance
compiletime: 0
common/session/query/invocation
time: Thu May 12 13:10:00 GMT-06:00 2011
blocksize: 59256
duration: 359
query/wrappers/relational
source: jdbc.wcb.fineos
sql:
select codeid, description, FEE_CODE_DOC_TYPE, ismax, isovr
from
select distinct
sd.codeid, sd.description,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-MAX (MAXIMUM AMOUNT)'
) ISMAX,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-OVR (Overrideable)'
ISOVR,
select count(*) from wcbapp.tolserviceset ss, wcbapp.RSERVICESRVCSETSERVICESETS sss, wcbapp.tolservicedefinition sd1 where
sss.i_from = sd.i and
sss.c_from = sd.c and
sss.i_to = ss.i and
sss.c_to = ss.c and
sd1.codeid = sd.codeid and
ss.name = 'FEEGROUP-INT (Internet Enterable)'
ISINT
,trow.answerstr FEE_CODE_DOC_TYPE
from wcbapp.tocorganisation o, wcbapp.tolpartydetails pd, wcbapp.tolserviceagrmtforprovider safp,
wcbapp.tolserviceagreement sa, wcbapp.tolserviceagreementversion sav, wcbapp.rsrvchrgrsrvagrvrserviceagreem scg_sav,
wcbapp.tolservicechargegroup scg, wcbapp.tolservicechargegroupversion scgv, wcbapp.tolserviceprovisionagreement spa,
wcbapp.tolservicedefinition sd
,wcbapp.trow trow, wcbapp.tlookupversion tlookupversion, wcbapp.tlookup tlookup
where
trow.i_lkpver_rows = tlookupversion.i
and trow.c_lkpver_rows = tlookupversion.c
and tlookupversion.i_lookup_versions = tlookup.i
and tlookupversion.c_lookup_versions = tlookup.c
and sd.codeid = trow.minstr_1
and sd.codeid = trow.maxstr_1
and tlookup.name = 'FeeCodeToDocumentLookup' and
spa.i_service_serviceratede = sd.i and
spa.c_service_serviceratede = sd.c and
spa.i_srchrgrv_serviceratede = scgv.i and
spa.c_srchrgrv_serviceratede = scgv.c and
scgv.i_srvchrgr_servicecharge = scg.i and
scgv.c_srvchrgr_servicecharge = scg.c and
scg.i = scg_sav.i_from and
scg.c = scg_sav.c_from and
scg_sav.i_to = sav.i and
scg_sav.c_to = sav.c and
sav.i_srvcagrm_serviceagreem = sa.i and
sav.c_srvcagrm_serviceagreem = sa.c and
sa.i = safp.i_srvcagrm_provider and
sa.c = safp.c_srvcagrm_provider and
safp.i_prtdtls_serviceagreem = pd.i and
safp.c_prtdtls_serviceagreem = pd.c and
pd.i_ocprty_party = o.i and
pd.c_ocprty_party = o.c and
'01-MAY-11' between safp.effectivedate and safp.enddate and
o.customerno = ? || ?
order by sd.codeid
where ISINT = 1
parameters:
DOC
007492
time: 344
rows: 500
query/performance
evaltime: 359
query/service
result:
*** removed due to length ***
query/service
function: getFeeCodeByCaregiverEffectiveDate1
arity: 2
dataservice: ld:org/wcb/claims/payment/FINEOS/physical/SQL.ds
query:
import schema namespace t1 = "http://www.test.com/claims/payment" at "ld:org/wcb/claims/payment/FINEOS/physical/schemas/SQL.xsd";
declare namespace ns0="ld:org/wcb/claims/payment/FINEOS/physical/SQL";
declare namespace ns1="http://www.w3.org/2001/XMLSchema";
declare variable $__fparam0 as ns1:string external;
declare variable $__fparam1 as ns1:string external;
fn:subsequence(
for $FeeCode3 in ns0:getFeeCodeByCaregiverEffectiveDate1($__fparam0,$__fparam1)
 return
 $FeeCode3
,1,500)
parameters:
DOC
007492
common/time
duration: 375
timestamp: Thu May 12 13:10:00 GMT-06:00 2011
[Thu May 12 13:10:00 GMT-06:00 2011] End
------------------------------------------------------------------------

Where do you store Hard coding values?

Hi All,
We have a requirement to call a 3rd party web service from SAP for which there are 12 - 13 attributes which are constant values and are not going to change. These can be hard coded inside the implementation methods but I do not want to do it. Say after 3 months there is a additional attribute that need to be added then in that case I need not touch the code back.
We can store it Z tables which is one option. I would like to get ideas from experts here in the forum what would you do in this type of a scenario instead of hard coding?
Please post in your feedback from the maintenance perspective across landscapes.
Thanks,
Nagarajan.

Hello Nagarajan,
you can create the constants in the Assistance class or create a separate interface for storing the constant values.
If there is any change in the constant value, then you have to change the class/interface. this can't be avoided.
BR, Saravanan

How can I assign a hard coded value to a variable of type OBJECT.

Hi,
 I have to call the following method
 lc_action_execute->get_ref_object(
 exporting
 io_appl_object = io_appl_object
 importing
 ev_guid_ref = lv_guid_ref.
Now I have to hard code the io_appl_object variable (of type OBJECT) to test my application for the time being. How can I assign a value to the variable? Is there any way to do that?

I wouldn't use WDR_CONTEXT_ATTR_VALUE_LISTGEN. Use wdr_context_attr_value_list instead:
data l_topics type zpm_main_topic_tbl.
l_topics = wd_assist->read_all_topics( ).
data lt_valueset type wdr_context_attr_value_list.
field-symbols <wa_topic> like line of l_topics.
field-symbols <wa_vs> like line of lt_valueset.
loop at l_topics assigning <wa_topic>.
 append initial line to lt_valueset assigning <wa_vs>.
 <wa_vs>-value = <wa_topic>-main_topic.
 <wa_vs>-text = <wa_topic>-main_topic_desc.
endloop.
data lo_nd_meeting type ref to if_wd_context_node.
* navigate from <CONTEXT> to <MEETING> via lead selection
lo_nd_meeting = wd_context->get_child_node( name = wd_this->wdctx_meeting ).
data lo_node_info type ref to if_wd_context_node_info.
lo_node_info = lo_nd_meeting->get_node_info( ).
lo_node_info->set_attribute_value_set(
 name = 'MAIN_TOPIC'
 value_set = lt_valueset ).

Outer join - Hard coded value

Hello All,
Is there any way to specify a hardcoded value for outer join in the repository?
for Ex: Tablename.column (+) = 'A001'.
Please let me know.
Thanks
rkingmdu

somting like this?
this outer join will be use ful with combination of other column in where clause.
where colname(+)=124

Handling Outer Join for hard coded values in the Logical Table Source

Has anyone tried to apply an outer join in the Logical Table Source Content Tab?
I have to add this APPLSYS.FND_LOOKUP_VALUES.LANGUAGE (+)= 'US' but the outer join is not allowed. I get this message.... [nQSError: 27002] Near <(>: Syntax error [nQSError: 26012] .
Could you tell me please how this should be handled? I have a lot of this cases in my project and without this being set-up affects the expected output of my report.
Thank you in advance.

hi Ap,
Pull only Dim_W_LOV_D_Acty_Src column into answers and check whether u r able to see CUST_SRC_ACT or not .Of course, you need to check sql query too
Thanks,
Saichand.v

No release template matching the current build definition was found

Hi,
I am trying to integrate TFS 2012 project build with Release Managment 2013 Update 3.
I have working agentless (vNext) release template which successfully installs my application on server. Now I want to automaticly start release process after build completition. So I set proper build definition and checked "Can Trigger a Release from
a build?" box. However when build runs I get:
"No release template matching the current build definition was found to create a release and deployment for."
Any ideas what's wrong?
I also tried a solution with Deployment Agent (old Release Template and stuff) and it seems to be working...
Thanks for help,
Michał

As of Update 3 you now can do the trigger for vNext via a REST API. This means you can simply use a PowerShell script called from the standard Default Template xaml file. Below is a script which you can see below can be configured easily into the Build
Definition:
InitiateReleaseFromBuild.ps1:
param(
[string]$rmserver = $Args[0],
[string]$port = $Args[1],
[string]$teamProject = $Args[2],
[string]$targetStageName = $Args[3])
cls
$teamFoundationServerUrl = $env:TF_BUILD_COLLECTIONURI
$buildDefinition = $env:TF_BUILD_BUILDDEFINITIONNAME
$buildNumber = $env:TF_BUILD_BUILDNUMBER
"Executing with the following parameters:`n"
" RMserver Name: $rmserver"
" Port number: $port"
" Team Foundation Server URL: $teamFoundationServerUrl"
" Team Project: $teamProject"
" Build Definition: $buildDefinition"
" Build Number: $buildNumber"
" Target Stage Name: $targetStageName`n"
$exitCode = 0
trap
$e = $error[0].Exception
$e.Message
$e.StackTrace
if ($exitCode -eq 0) { $exitCode = 1 }
$scriptName = $MyInvocation.MyCommand.Name
$scriptPath = Split-Path -Parent (Get-Variable MyInvocation -Scope Script).Value.MyCommand.Path
Push-Location $scriptPath
$server = [System.Uri]::EscapeDataString($teamFoundationServerUrl)
$project = [System.Uri]::EscapeDataString($teamProject)
$definition = [System.Uri]::EscapeDataString($buildDefinition)
$build = [System.Uri]::EscapeDataString($buildNumber)
$targetStage = [System.Uri]::EscapeDataString($targetStageName)
$serverName = $rmserver + ":" + $port
$orchestratorService = "http://$serverName/account/releaseManagementService/_apis/releaseManagement/OrchestratorService"
$status = @{
"2" = "InProgress";
"3" = "Released";
"4" = "Stopped";
"5" = "Rejected";
"6" = "Abandoned";
$uri = "$orchestratorService/InitiateReleaseFromBuild?teamFoundationServerUrl=$server&teamProject=$project&buildDefinition=$definition&buildNumber=$build&targetStageName=$targetStage"
"Executing the following API call:`n`n$uri"
$wc = New-Object System.Net.WebClient
#$wc.UseDefaultCredentials = $true
# rmuser should be part rm users list and he should have permission to trigger the release.
$wc.Credentials = new-object System.Net.NetworkCredential("rmuser", "rmuserpassword", "rmuserdomain")
try
$releaseId = $wc.DownloadString($uri)
$url = "$orchestratorService/ReleaseStatus?releaseId=$releaseId"
$releaseStatus = $wc.DownloadString($url)
Write-Host -NoNewline "`nReleasing ..."
while($status[$releaseStatus] -eq "InProgress")
Start-Sleep -s 5
$releaseStatus = $wc.DownloadString($url)
Write-Host -NoNewline "."
" done.`n`nRelease completed with {0} status." -f $status[$releaseStatus]
catch [System.Exception]
if ($exitCode -eq 0) { $exitCode = 1 }
Write-Host "`n$_`n" -ForegroundColor Red
if ($exitCode -eq 0)
"`nThe script completed successfully.`n"
else
$err = "Exiting with error: " + $exitCode + "`n"
Write-Host $err -ForegroundColor Red
Pop-Location
exit $exitCode
Hope this helps,
Colin Beales [MSFT]

Error in setting final variable using properties vs hard coding

I am getting the following error when trying to use this line of code
public static final String MESSAGES_BUNDLE_NAME = System.getProperty("messages");
java.lang.ExceptionInInitializerError: java.lang.NullPointerException
When I change the above line to
public static final String MESSAGES_BUNDLE_NAME = "messages_usa";
the program works fine.
Any ideas as to why this is happening would be greatly appreciated.
Thanks,
Boris

I am sorry, but I realized now that I did notdiscribe
the problem fully.
The error is happening on the following line
return APPLICATION_RESOURCE_BUNDLE.getString(key);
So it looks like APPLICATION_RESOURCE_BUNDLE is
becoming null.
No that is not what is happening.
This is the error that you posted.....
java.lang.ExceptionInInitializerError:
java.lang.NullPointerException
The first part is the exception, not the second part
(although the second causes the first.)
The java docs specifically point out that a
NullPointerException is returned if the base name is
null - the parameter to getBundle().
The initialization exception occurs because when it
tries to excecute the initialization expression for
the final, then the getBundle() is throwing the null
pointer exception.
It is is not clear what you code is actually supposed
to be doing but I think you suggested that your are
using a system property. If so then it means that
that system property is not defined. And it works
when you use a hard coded value because the hard coded
value is defined.From this explanation I don't understand why initializing the bundle name from System.getProperty() works in the same class with the bundle obejct initialization, but does not work when it is in another class from bundle object initialization.

Passing hard code value as the sender name in fm SO_NEW_DOCUMENT_SEND_API1

Hi Experts,
I am using one FM "SO_NEW_DOCUMENT_SEND_API1" to send mail form my program.
In the receipient inbox under from address the mail is showing
the USER ID in which that program has been executed .
*Is it possible to send a hard coded value as a sender instead of the sap user id in the sender address * .
Regards
sarmistha
Edited by: sarmistha das on May 6, 2008 11:18 AM

Hi,
Using FM SO_NEW_DOCUMENT_SEND_API1 you cannot have hard coded sender address.
You can create your Z fm that is copy of the above fm and implement an option to have sender address.
Or you can implement below logic to send an email in your program.
*TABLES : ypgtest.
DATA: send_request       TYPE REF TO cl_bcs.
DATA: text               TYPE bcsy_text.
DATA: xtext TYPE STANDARD TABLE OF solix .
DATA: document           TYPE REF TO cl_document_bcs.
DATA: sender             TYPE REF TO if_sender_bcs.
DATA: recipient          TYPE REF TO if_recipient_bcs.
DATA: bcs_exception      TYPE REF TO cx_bcs.
DATA: sent_to_all        TYPE os_boolean.
DATA: conlength TYPE i ,
      conlengths TYPE so_obj_len ,
      result_content TYPE string .
     subject TYPE so_obj_des .
DATA: e_r_page TYPE REF TO cl_rsr_www_page.
DATA: content_length     TYPE     w3param-cont_len ,
      content_type     TYPE     w3param-cont_type,
      return_code     TYPE     w3param-ret_code .
DATA: html TYPE STANDARD TABLE OF w3html .
DATA: server TYPE string ,
      port TYPE string .
DATA: wa_rec TYPE ad_smtpadr .
DATA: bcs_message TYPE string .
DATA : reply TYPE REF TO if_recipient_bcs.
DATA: tmp_str TYPE string .
data: v_sender like SENDER_ID.
v_sender = SENDER_ID.
IF NOT recepients[] IS INITIAL .
    CLEAR result_content.
    CLEAR : server, port .
    CALL FUNCTION 'TH_GET_VIRT_HOST_DATA'
       EXPORTING
         protocol             = 1
         virt_idx             = 0
LOCAL                = 1
      IMPORTING
        hostname             = server
        port                 = port
      EXCEPTIONS
        not_found            = 1
        internal_error       = 2
        OTHERS               = 3 .
    CLEAR tmp_str .
    CONCATENATE 'http://' server ':' port '/sap/public/' INTO tmp_str .
    REPLACE ALL OCCURRENCES OF '/sap/public/' IN result_content WITH
    tmp_str .
    CLEAR tmp_str .
    CLEAR: conlength,conlengths .
    REFRESH text .
    text[] = email_body[].
    TRY.
        CLEAR send_request .
        send_request = cl_bcs=>create_persistent( ).
        CLEAR document .
        document = cl_document_bcs=>create_document(
                        i_type    = 'HTM'
                        i_text    = text
                       i_length = conlengths
                        i_subject = subject ).
    add document to send request
        CALL METHOD send_request->set_document( document ).
        CLEAR sender .
        sender = cl_cam_address_bcs=>create_internet_address( SENDER_ID ).
        CALL METHOD send_request->set_sender
          EXPORTING
            i_sender = sender.
        CLEAR sender .
        reply = cl_cam_address_bcs=>create_internet_address( reply_id ).
        CALL METHOD send_request->set_reply_to
          EXPORTING
            i_reply_to = reply.
        CLEAR wa_rec .
        LOOP AT recepients INTO wa_rec .
          CLEAR recipient .
          recipient = cl_cam_address_bcs=>create_internet_address(
                                            wa_rec ).
    add recipient with its respective attributes to send request
          CALL METHOD send_request->add_recipient
            EXPORTING
              i_recipient = recipient
              i_express   = 'X'.
        ENDLOOP .
        CALL METHOD send_request->set_status_attributes
          EXPORTING
            i_requested_status = 'E'
            i_status_mail      = 'E'.
        CALL METHOD send_request->set_send_immediately( 'X' ).
    ---------- send document ---------------------------------------
        CALL METHOD send_request->send(
          EXPORTING
            i_with_error_screen = 'X'
          RECEIVING
            result              = sent_to_all ).
        IF sent_to_all = 'X'.
          APPEND 'Mail sent successfully ' TO return .
        ENDIF.
        COMMIT WORK.
*                     exception handling
* replace this very rudimentary exception handling
* with your own one !!!
      CATCH cx_bcs INTO bcs_exception.
        bcs_message = bcs_exception->get_text( ).
        APPEND bcs_message TO return .
        EXIT.
    ENDTRY.
ELSE .
    APPEND 'Specify email address for sending' TO return .
ENDIF .
Regards,
Shravan G.

Agent based release templates, hard coded values configurable?

Similar Messages

Maybe you are looking for