Agent Binding to NIC with multiple Bonded NICs and VLANS

Hi
I am having an issue with agent communication where the agent installs on a server, but is then unable to communicate correctly with the primary servers. This error is typically reported through the Zenworks agent status in ZCC "Unable to connect to the agent service through the IP Address or DNS."
It seems that when the agent installs it selects what it deems to be the primary NIC and then binds to this address. I have a large number of servers within my deployment domain and whilst in some instances it will be relatively straight forwadr to change the binding order in other instances this can be quite complex and will greatly increase the complexity and timeframe for our deployment project. Can anyone help with my questions below.
1 Can anyone confirm that this is indeed the default behaviour ?
2 Is there any way to specify the specific interface for the agent to bind to ?
3 Does anyone have any practical examples of workarounds for this issue ?
Many Thanks
Gareth

Find the Server in the ZCC, Select the Settings Tab and Modify the
"Restricted IP Addresses" to tell devices to not use a specific address.
On 4/26/2012 5:56 AM, garethb wrote:
>
> Hi
>
> I am having an issue with agent communication where the agent installs
> on a server, but is then unable to communicate correctly with the
> primary servers. This error is typically reported through the Zenworks
> agent status in ZCC "Unable to connect to the agent service through the
> IP Address or DNS."
>
> It seems that when the agent installs it selects what it deems to be
> the primary NIC and then binds to this address. I have a large number of
> servers within my deployment domain and whilst in some instances it will
> be relatively straight forwadr to change the binding order in other
> instances this can be quite complex and will greatly increase the
> complexity and timeframe for our deployment project. Can anyone help
> with my questions below.
>
> 1 Can anyone confirm that this is indeed the default behaviour ?
>
> 2 Is there any way to specify the specific interface for the agent to
> bind to ?
>
> 3 Does anyone have any practical examples of workarounds for this issue
> ?
>
> Many Thanks
> Gareth
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

With multiple tabs open, and selecting a new (blank) tab, RoboForm open new web page in far left tab, not the new (blank) one. How to correct this?

Problem: Firefox Browser Tabs when using RoboForm
When using Tabs in the Firefox browser (with multiple Tabs already open), I (1) click to open a new (blank) tab and then, (2) click on RoboForm to go to a new website. Instead of the new website opening in the newly opened (blank) tab it opens in the first (far left) tab. This only began happening when I installed Firefox 5.0 and RoboForm Desktop v7.3.2 at the same time.
My system: HP Pavilion Media center, Windows Vista Ultimate 64-bit, 8GB RAM, Firefox v5.0, Roboform Desktop v7.3.2

Thanks a lot. The culprit turned out to be Webmail Notifier. Unfortunately, there seems to be some problems on their end that the developer has not yet responded to, but something about the extension is screwing up tab functionality.
Thanks!

How to design a form with multiple lang(Arabic and Eng) in a page

Hi All,
Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
Pls help me how to design
Thanks in advance.
Regards,
Jayakar

I am not sure how you can have two different languages inside the same PDF.
Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
Anotherway,
Have same sections in both the languages and hide and unhide based on the user selection of the language..
if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
Thanks
Srini

How to design a form with multiple lang(Arabic and Eng) in a pge

Hi All,
Could you pls help me how to design a form with multiple languages. when I set the form proprties-->Form Locale as Arabic. English text is comming in reverse and when set the FormLocale as English, Arabic text is comming in revese.
Pls help me how to design
Thanks in advance.
Regards,
Jayakar

I am not sure how you can have two different languages inside the same PDF.
Alternatively, if you want to place only the static labels, you can convert all the static label in one language to images and set the form language setting to other. And place the images inside the form using Image field. For example, you can keep the form language as English and then convert all the arabic language labels/ Static text to images.
Anotherway,
Have same sections in both the languages and hide and unhide based on the user selection of the language..
if your user chooses Arabic, then you can unhide the Arabic sections and change the form language properties programmatically..
Thanks
Srini

Issue with multiple application installation and server share

Hi,
SCCM 2007 SP2 R3 ICP2
All servers W2K8R2
I am having an issue with software installs. When using a variable for multiple applciation installs, I get access errors when the applications go to install. It appears to be a multiple connection issue, but I can't figure out why.
I am using server shares for my DPs. The proper permissions are set. The servers (DP) are W2K8R2. I think it has to do with the way R2 handles the conenctions. I want to know if this is a known issue or if anyone has come accross
it.
I am going to post in the software distribution forum as well, but thought this would be a config question.

Hi! I'm waking up this dead thread but I've got a *very* similar problem!
I've got a SCCM 2007 SP2 R3 installation on Win2008. All clients are in the same ConfigMgr-site. Multiple package deploy in the same site-boundary as the CM-server works excellent. (We've got three DPs in the same site-boundary as the
CM-server itself.)
Now, we have a new site-boundary with it's own Protected DP where multiple package deploy fails
but the same packages, being run from the task-sequnce works! So then the client can download, install and run the packages from the proteced DP just fine. All "single" packages install fine before the "Multiple Appliaction"-step.
I've tripple checked that we're running the same packages when we're installing Multiple Packages as we do in the Task-Sequence. And
the same Task-sequence with the Multiple Package installation step
works fine in our site-boundary where the ConfigMgr-server is installed.
Here's the log from a client trying to access and install one of three packages through the the Install Multiple Packages task-sequence step.
<![LOG[Policy SMS10000-CEN000BD-25FE0E9B downloaded successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:597"> <![LOG[SMS PackageID = CEN000BD]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:247"> <![LOG[Source version = 2]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:296"> <![LOG[SMS Program Name = RESTORE]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:317"> <![LOG[::CompressBuffer(65536,-1)]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:695"> <![LOG[Compression (zlib) succeeded: original size 26608, compressed size 3254.]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:484"> <![LOG[Policy for CEN000BD:"RESTORE" successfully stored in environment]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:331"> <![LOG[Downloaded policies successfully]LOG]!><time="16:01:20.905+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsutils.cpp:725"> <![LOG[Installing pkg 'CEN000BD', program 'BACKUP']LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="dsinstaller.cpp:290"> <![LOG[Resolving content for SMS Package CEN000BD]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:768"> <![LOG[Getting local network information.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1846"> <![LOG[GetAdaptersAddressess entry point is supported.]LOG]!><time="16:01:20.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:118"> <![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="16:01:20.937+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:181"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} is DHCP enabled. Checking quarantine status.]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmiputil.cpp:509"> <![LOG[Adapter {B3FC51BA-75F3-4C93-98D3-72ECE4B7A6A2} has 1 IPv4 address(es).]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="2" thread="3040" file="ccmiputil.cpp:540"> <![LOG[Executing content location request for CEN000BD:2 as GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF]LOG]!><time="16:01:21.124+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1852"> <![LOG[Initializing CLibSMSMessageHeader with authenticator]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1103"> <![LOG[Sending RequestContentLocations]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:3367"> <![LOG[Messaging Auth Using V4 Mode]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:1400"> <![LOG[Formatted header:]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1500"> <![LOG[<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:87F78866-5FCB-43FE-A2F7-07DA7F6863DF</SourceID><SourceHost/><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2011-12-12T15:01:21Z</SentTime><Protocol>http</Protocol><Body Type="ByteRange" Offset="0" Length="618"/><Hooks><Hook2 Name="clientauth"><Property Name="Token"><![CDATA[CCMClientID: BBA60FFE-10D3-42AA-88BF-CBAC68CA4BB4 CCMClientIDSignature: 3F5C9150307B32713AB75C2BD3431AFCB0816854881F6450868D120ABA7FC4424EF3407E6BD2531E32EBF4A89D92440D3BD9E68078A8BB5B899905A765C4AC28B1D837A0D58EB02C55048B1BA97BF0319B02276D87846F4748C2FBAA887C8921989CB07E15BD6685BFC84792B1C9E91EE140DA03BA01FBBF7F6EF824F5FFAF15 CCMClientTimestamp: 2011-12-12T22:02:17Z CCMClientTimestampSignature: 4E28E6E6EEF71EB4A6FDE54155100F67610556C0E5F81DF82B6AB03608C1745485D65AB09F195D384903AB60DD9993118FCECCC3C9E85F5A9C0CB6E949A5F8DF305B7A5E64E0D98973AF12E034E468B6E7CC03FE23DC3DEB686CBA63FADD895F61D7034504C018F6F20561F40B47BC20509423C2385032A3AA6866F266409F1E]]></Property></Hook2></Hooks><Payload Type="inline"/><TargetHost/><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg> ]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:1501"> <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: STOSCCM02.INTERNT.SVT.SE:443 CCM_POST /ccm_system_AltAuth/request]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7446"> <![LOG[In SSL, but with no client cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7596"> <![LOG[In SSL, but with no media cert]LOG]!><time="16:01:21.295+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:7602"> <![LOG[The request has succeeded. 200 OK]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="libsmsmessaging.cpp:7734"> <![LOG[Decompressing reply body.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="libsmsmessaging.cpp:2395"> <![LOG[::DecompressBuffer(65536)]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:735"> <![LOG[Filtering Content Locations.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:1883"><![LOG[Decompression (zlib) succeeded: original size 522, uncompressed size 2128.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="ccmzlib.cpp:646"><![LOG[ Adding \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\ to Local DP list.]LOG]!><time="16:01:21.342+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1938">
 <![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
<![LOG[Shuffling HTTP local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2012">
<![LOG[Shuffling Local DP list.]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2087">
<![LOG[Attempting to connect to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD\]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:2151">
<![LOG[Deleting any existing network connections to "\\vaxcmdp01.domain.com\*".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:407">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:34.974+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:37.985+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:42.711+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:45.721+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:50.400+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:01:53.411+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:01:58.090+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:01.100+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:05.780+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:08.790+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:13.469+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:16.480+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:21.174+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:24.185+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:28.911+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:31.921+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:36.600+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[Attempting to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD".]LOG]!><time="16:02:39.611+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:501">
<![LOG[Retrying download...]LOG]!><time="16:02:44.290+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="tsconnection.cpp:508">
<![LOG[dwErr, HRESULT=800704c3 (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,517)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="tsconnection.cpp:517">
<![LOG[Failed to connect to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000BD" (1219)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="tsconnection.cpp:517">
<![LOG[!slistSMBPaths.empty(), HRESULT=80040103 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2163)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="resolvesource.cpp:2163">
<![LOG[TS::Utility::GetContentLocations( pszPackageId, L"", lSourceVersion, m_sSiteCode, m_sManagementPoint, &m_oHttpTransport, sClientID, TRUE, sNetworkAccessAccount, sNetworkAccessPassword, TRUE, TRUE, slistSMBPaths, slistHttpPaths ), HRESULT=80040103 (e:\nts_sms_fre\sms\client\osdeployment\installsoftware\dsutils.cpp,843)]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="3040" file="dsutils.cpp:843">
<![LOG[Content location request for CEN000BD:2 failed, hr=0x80040103]LOG]!><time="16:02:47.300+-60" date="12-12-2011" component="InstallSoftware" context="" type="3" thread="3040" file="dsutils.cpp:843">
While installing a single package from the same DP (VAXCMDP01) looks like this:
![LOG[PackageID = 'CEN000D1']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:332">
<![LOG[BaseVar = '', ContinueOnError='']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:333">
<![LOG[SwdAction = '0002']LOG]!><time="15:29:13.401+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="main.cpp:334">
<![LOG[GetExecRequestMgrInterface successful]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:218">
<![LOG[Retrieving value from TSEnv for '_SMSTSPolicyCEN000D1_Install']LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="installsoftware.cpp:85">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 2844, uncompressed size 22640.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[ADV_AdvertisementID=CEN20022]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1119">
<![LOG[PKG_PSF_ContainsSourceFiles=TRUE]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:1138">
<![LOG[::DecompressBuffer(65536)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:735">
<![LOG[Decompression (zlib) succeeded: original size 12, uncompressed size 4.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="ccmzlib.cpp:646">
<![LOG[SoftDist paused cookie = 16271]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:181">
<![LOG[Found the location for the package _SMSTSCEN000D1. The location is on \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:3146">
<![LOG[nPos != CCM::Utility::String::npos, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,253)]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="0" thread="2768" file="resolvesource.cpp:253">
<![LOG[Creating a connection to \\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\ with default account]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="resolvesource.cpp:2243">
<![LOG[Connection request for "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:208">
<![LOG[No credentials available for connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1". See whether the share has already been connected.]LOG]!><time="15:29:13.417+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:233">
<![LOG[Connecting to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.510+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:268">
<![LOG[Successfully connected to "\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1"]LOG]!><time="15:29:13.588+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="tsconnection.cpp:287">
<![LOG[SMS PkgID 'CEN000D1' resolved to location '\\vaxcmdp01.domain.com\SMS_DP$\SMSPKG\CEN000D1\']LOG]!><time="15:29:13.635+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="2768" file="installsoftware.cpp:145">
Notice that it never checks for DPs in the same way as the multiple package install:
<![LOG[Found 0 DPs in subnet, 1 DPs in local site, 0 DPs in remote location and 0 Multicast DPs]LOG]!><time="16:01:21.389+-60" date="12-12-2011" component="InstallSoftware" context="" type="1" thread="3040" file="resolvesource.cpp:1974">
I know that the TS checks package dependencies before executing the TS. That's not possible with Multiple packages since they are variable dependant. I think this is somehow related although it doesn't explain why my client can't authenticate properly.
The Network Access Account is a member of Domain Users and Domain Users have Read Access on the share and on the folder of the VAXCMDP01 DP - which should be identically configured to our other DPs closest to our ConfigMgr Server.
Any ideas?
Kind regards,
Mathias

DFF with Multiple Codes (contexts) and Segments

I have made a DFF with multiple Codes just like the reference field in Oracle Order Management. Each code consists of multiple segments. I want to enter data in all the code and in all segments.
The problem is, i select first code and enter data in its segments and save it. After that i select another code (context) from the lov and enter data in its segments. Now when i re-open the first code (context) in which i have entered the data there is nothing.
What should i do??
Note: I can also provide you guys with screen shots and any other file that you want.

Thanks for your reply. Are you sure this is the only possibility as this is a very crucial requirement by our client and we need it to work our way. Can it be made possible through personalization??
Regards,
Mohammad Daniyal Khurshidi

How to track calendars with multiple devices apple and droid

I have a iPhone 5 and iPad but would like to find a way to communicate my calendar with others using apple and droid products. How would I do that?

Sync your calendar with iCloud, then share it publically as explained here: http://help.apple.com/icloud/#/mm6b1a9479. This allows non-iCloud users to view the calendar (but not edit it).

Issues with multiple apple IDs and iTunes accounts

I work in an office that is all mac based and have mac computers at home. I have an apple ID and iTunes account for personal use where I purchase books and music and I have an office apple ID and iTunes account to share calendars with colleagues using iCloud and purchase work related apps like upgrades to operating systems, etc.
I have an iPhone that is set up with my personal apple ID so that my music is on my phone and so that the photo streaming is attached to personal photos, etc. Is there a way to sync my personal contacts with my contacts that are registered with my professional apple ID? Ideally, I would like to have my iOS devices syncing my calendar and contacts with my work apple ID and my music and photos with my personal ID. Is there any hope or am I stuck?
Thanks for any help anyone might have...

Welcome to the Apple community.
So far as contacts and calendars go, you can share your works data and your personal data with your iOS device by entering the second account as a secondary account in settings > mail, contacts and calendars.
You should also be aware that your iCloud and iTunes accounts and different accounts, you do not have to use the same ID for both.

Party communication channel for multiple stores with multiple user id and passwords in sap pi

Hi Exeperts,
I have a scenario proxy to SAOP . where i am sending some information from my stores to third party company with single user id and password in communication channel.
but requirement is changed now i have 20 stores with 20 user id and password for communication channel.how can i achieve this requirement?
Can i create 20 communication channels for 20 stores or can handle through the party based communication ?
Please help us achieve the requirement.
Regards
Ravinder.s

Hi,
In the SOAP Receiver adapter, you can only store 10 userid/password combinations via Authorization Keys. These are called via Dynamic Configuration via technical name TAuthKey. In your case, for it to work, you need:
1. 2 business components/2 SOAP receiver communication channels.
2. 1 receiver determination with xPath for username to determine correct business component
3. 1 interface determination
4. 2 receiver agreements (one for each cc)
Hope this helps,
Mark

Re: to create outbound file with multiple header ,detail and trailor in informatica

Dear Mohan Prakash, Please mentation The Target Which Format you need. Please let me know. Thanks & RegardsKasireddy+966545281845

hi I want to create a file with muiltple header detail and trailorSample of my file 1F99500094959 5F99000000999911025F99000000999912025F99000000999913029F99500094959 1G83341002729803 5G83000000999918020109G83341002729803 1G83910377940 5G830000009999190201011050003522029G83910377940 T20110720000000900000006750{ In this file 1 is header and 5 is detail and 9 is trailer and in last T segment is also trailerI have any idea to create seperate 3 files and in lastconcatenate all file with the help of unixbut in my case data is so large (in millions) this approach is not use full please suggest my any ideaHow to create VSAM file

WLC2112 with Guest / Web-Auth and vlan

Hi
I'm trying to configure my WLC with guest SSID and vlan 10.
The security is only set to Web-auth, and it is all working if the guest network is set to nativ vlan (1) But it seems that the http(s)://1.1.1.1/login.html is not reacheble from the guest SSID/VLAN??
Please help.
Management IP Address 192.168.14.252
Software Version 6.0.182.0
Emergency Image Version
I have tried with ver. 5.2 also -

I think that 1.1.1.1 is only reachable from a wireless client during webauth. They should not be able to reach that address once they have passed through the web auth page.
Don't know if that helps, or not.

After NICs teaming, DHCP can't bind the NIC, and DHCP stop working.

Hello, we have a DELL Server with windows 2008r2,
I used the windows network Bridge first, in that situation I can see DHCP can Bind the "network Bridge".
Now I need use LACP to team the NICs, I downloaded the
Broadcom Advanced Control Suite to Teaming the 3 NICs(BCM5709C),
I followed this video, and the teaming works, but now in DHCP I can't see the virtual adapter,
https://www.youtube.com/watch?v=x2nq-qEwAzg
The DHCP got 1041 error: The DHCP service is not servicing any DHCPv4 clients because none of the active network interfaces have statically configured IPv4 addresses, or there are no active interfaces.
Same like here
http://www.experts-exchange.com/Networking/Network_Management/Network_Operations/Q_28159948.html
Anyone had this issue before and know a solution?
Thanks
Jason
Jason

Hi,
I am investigating the issue. I did find a post here
https://communities.intel.com/message/61068 that indicates after configuring NIC teaming you might need to wait a while for the team to initialize before configuring a static IP address. Otherwise, the static IP address does not work correctly.
-Greg

PC WF - Agent Determination for Items with Multiple Account Assignment

Hello Gurus!
The quoted text below is from [SAP Help Documentation|http://help.sap.com/saphelp_srm70/helpdata/en/ad/d8fd25beb64bbe9d671f3199eb7edf/content.htm]. I haven't been able to find any further documentation on how to implement this feature. Is this something the system can do without any BAdI implementations? Has anybody implemented this? How can this be accomplished? We are on SRM 7.0.
"You can distribute costs across accounts by percentage, by quantity, or by value. If the responsibility for approving items according to given accounting data is divided between several approvers, the system can create one work item for each approver. The item can only receive the status Approved after each approver has approved it. As soon as one approver rejects an item, the item receives the status Rejected."
Regards,
Ramki.

Hi,
SAP does not provide the standard Badi implementation to achieve your business requirement.. but you can refer enhancement implementation /SAPSRM/BD_WF_AGENTS_SC where you can find badi implementation /SAPSRM/BD_WF_SC_RR_PGRP is similar..
Saravanan

Single SOA Suite Install with multiple oc4j instances and java processes

We right now have 5 BPEL processes and 5 ESB processes all running under one java.exe process. We would like to seperate some of
them out into their own java.exe processes without having to install more
%ORACLE_HOME% instances of SOA Suite. I can create an oc4j instance but of
course it doesn't have any SOA Suite stuff deployed to it. I tried to see what
the install would do with this new oc4j instance but it wants to create a new
%ORACLE_HOME% with an entire installation of SOA Suite.
Is there some sort of way to clone oc4j instances that have SOA Suite deployed to them so that you
don't need multiple %ORACLE_HOME% instances?
### How is this Issue Impacting Your Business ###
We really don't want to have a lot of %ORACLE_HOME% instances to have to maintain. We are
migrating projects over from our current integration server product and we'll
have potentially dozens more BPEL and ESB projects. We definitely want to
group and isolate projects so that outages of one project do not bring down
others that are unrelated.
We are currently experiencing periodic problems with one BPEL project that requires recycling but all the other BPEL and ESB
projects get recycled also. If we could put this project into it's own java
process without creating another SOA SUITE instance, it would be a big
help.
ANSWER
=======
You can create multiple domains in BPEL or create multiple systems/groups in ESB to group different projects.
MY REPLY:
=========
We have been using systems/groups in ESB but they all run under the save java.exe process. I would assume that having a seperate domain in BPEL would also run in that same java.exe process.
Right now, the one BPEL project we have a problem with will gobble up all the JDBC connections from time to time and that requires a recycle of SOA Suite, which means all BPEL and ESB projects that run in that java.exe process get recycled also. We're working that issue in a different ticket.
It would be nice if the SOA Suite installation would install against a new oc4j instance and not assume it has to create a complete %ORACLE_HOME% instance. The components of SOA Suite seem to be J2EE based components.
Scenario: I already have an oc4j instance called oc4j_soa and a complete %ORACLE_HOME% installation of soa suite. I then create a new oc4j instance from Enterprise Manager. Then I would deploy the esb-dt, esb-rt, orabpel, etc. components of SOA Suite to that new oc4j instance and modify the necessary config file so that it can work with OHS and the SOA Suite Databases. Is this possible?
Does anyone have any experience with this or do people typically install multiple complete installation of SOA Suite with mulitple Oracle Homes?

Hi,
yes, on metalink you get in touch with real experts....
You have to install serveral application servers to get different ORACLE_HOMEs.
For each one, you can install a BPEL PM.
But: For each BPEL PM you need your own database instance, or you have to configure them as a clustered BPEL installation.... (but i do not know if this work with non RAC DBs)

What is the Best way to set up Photoshop on a new PC with multiple Hard drives and SSD?

Hi hope someone can help.
I am considering buying a new PC (see below). We want to run both Photoshop and Lightroom on the PC. We will also be using it as a Media centre – that’s why I have two big hard drives.
I would like to know the best way to install both Photoshop and Lightroom on the storage devices. As you can see I will have two 3TB hard drives and one 250G SSD card.
For Photoshop I have read that it can be advantages to have the program on one drive the photos on another drive and the “scratch file’ on a third drive. It was even suggested that the PCs Operating system could be on a different drive than the program. Is this correct and if
so what is best to go on the SSD card? I will be partitioning the Hard Drives and I could even partition the SSD drive if that could help. In this case what size partitions are recommended?
If you can see a component below that you think would be an issue with running Photoshop and Lightroom, could you also let me know what you would recommend?
CPU: Intel Core i7-4790 CPU. LGA1150
Motherboard: Gigabyte GA-Z97M Micro-ATX Motherboard LGA1150
RAM: TWO (2) x Kingston 8GB DDR3 1600Mhz Desktop Memory
HDD: TWO (2) x Seagate Barracuda 3TB 3.5" 7200RPM 64 MB Cache SATA 6.0Gb/s
SSD: Samsung 850 EVO 250GB Internal Solid State Drive (SSD)
Graphics card: Leadtek nVidia Quadro K2200 4GB Graphic Card
Optical drive: LG Blu-Ray Combo Drive. BH16NS40
Power supply unit: Cooler Master V750S ATX Power Supply 750W, 80Plus Gold Certified
Case: Cooler Master Centurion 6Mid Tower Case
Operating system: Microsoft Windows 8.1 Pro 64-bit
Wireless / WiFi: TP-Link TL-WDN4800 900Mbps Wireless-N Dual Band PCI-E Adapter
BTW I would have liked to email this to Adobe support but could not find an email address to send it to. I hope this way works.

That's a nice system Kevin, and it will work very nicely with Photoshop. I do take it that you have 16Gb RAM in Total?
250Gb SSD is a good size, but you can still run short, and that will affect Windows performance. When you get your system, instal WinDirStat which gives you a graphic display of everything on your drive, like below. Clicking on any of the large areas will tell you what and where they are, so you can think about moving cache folders etc. to one of the HDDs.
Leave the Pagefile.sys on the boot drive. Think about disabling Hyphenate as it takes a ton of space, and too often crashes on wake up.
My Documents
Desktop
Downloads
Look at Bridge cache
iTunes backup
Other stuff like that.
Think about another 500Gb drive just for Photoshop Scratch. Drives are cheap as chips nowadays
Do yourself a favour, and invest $100 in Shadow Protect (or similar if there is such a thing) SP saves incremental backups every 15 minutes (you can set the interval, but it has no impact on performance with a system like yours). If you have a problem you can mount the back up at any of those 15 minute points, and open files from it. You can also make a bootable DVD image of your C drive, and be back up and running five minutes after disaster strikes.
Optimize Performance in Photoshop
Photoshop CC and CC 2014 GPU FAQ
For more ideas, swing by the Premiere Pro Hardware forum. Those guys are serious good at this stuff, and you'll find links tips and ideas.
Happy computing, and have fun with your Creative Cloud® apps.

Agent Binding to NIC with multiple Bonded NICs and VLANS

Similar Messages

Maybe you are looking for