Agent communicate to multiple management services
We use Enterprise Manager Grid Control 10g R2. Is it possible to let an agent communicate with more than one management service? How?
As you can see from discussion there are several possible setups, depending on your (detailed) requirements and what is meant by 'the same informations'.
If you have separate repositories, you have multiple, separate EM systems - not multiple management services. And you want to surveill the same node, so the straight forward thing seem to be to have an additional agent (per node). I dont think one agent can be part of more than one system simultaneously.
Similar Messages
-
How to change the management agent to use new management service ?
RDBMS Version:: 10.2.0.3
Operating System and Version:: AIX 5L
OEM Console Operating System and Version:: AIX 5L
Configuring the Management Agent to Use a New Management Service
Hi,
I am trying to change the management agent to use new management service using following process.
1. Stop management agent.
2. Change in file Agent_home/sysman/config/emd.properties
For values REPOSITORY_URL and emdWalletSrcUrl and emdWalletDest
3. Delete all the files in the following directories:
AGENT_HOME/sysman/emd/upload/
AGENT_HOME/sysman/emd/state/
4. Start the management agent.
./emctl status agent is showing the new URL for management server (OMS).
But I am not able to locate the new host on the Web console at the OEM console where it is changed to.
Can you suggest me workaround for the same?
Thanks
Dilipkumar PatelHi,
I am getting following error when trying to upload.
tb152 /appl/oracle/oem/10.2.0/bin> ./emctl upload agent
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
tb152 /appl/oracle/oem/10.2.0/bin>
Regards
Dilipkumar Patel. -
With Multiple Management Services, How BIg Is Your Shared Filesystem?
I am installing Grid Control 11.1 with multiple OMSs. Oracle uses a shared filesystem in this configuration for load balancing and fault tolerance. I want to know from anyone who has installed multiple OMSs: how much storage does Grid Contorl use in the shared file system in your implementation. Please also state how many targets are monitored. Thanks.
The size of the shared location is dependent upon:
1. How quickly agent files are processed - If your OMS are going to be down for awhile, size the location to support storing the files until processing can being and catch-up. The files are small but depending on the number of targets this can add up.
2. Usage of provisioning - Ensure you size to support all the various files used in your provisioning
We have several hundred targets, two OMS, and make limited usage of provisioning (software and agent installation images). We allocated an NFS share of 50GB but typical usage is <20GB, with 95% of that is due to the provisioning files. -
How to configure request manager service for multiple website in one web application
I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
AwenThat's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx -
Certificate error while connecting to multiple web service
I am having a web service test client through which I can connects and get reports from multiple web services.
In Development unix box, we are using "self-signed certificate" using keystore type JKS. In Production server, we are using certificate from CA.
The web service is running in Development and in Production.
Now I have developed single test client with a drop down selection for different web services. For example, if we select "Development", the request will go the development web service and if we select "Production", the request will go to Production web service.
Now while connecting to Develpment service, we are settings the below certificates details Because we are using the self signed certificate.
System.setProperty("javax.net.ssl.keyStore",keyStoreFileLocation);
System.setProperty("javax.net.ssl.keyStorePassword",keyStorePassword);
System.setProperty("javax.net.ssl.keyStoreType", keyStoreType);
System.setProperty("javax.net.ssl.trustStoreType",trustStoreType);
System.setProperty("javax.net.ssl.trustStore",trustStoreFileLocation);
System.setProperty("javax.net.ssl.trustStorePassword",trustStorePassword);
I am clearing the System properties using the System.clearProperty() while pointing to Production service. because in Production we are using the CA certificate from Thawte so these details are not required at all and our JRE (java 5) is pre configured to support that CA certificate.
I am using Resin-2.1.12, axis1.2 and java5.
Now the problem is
(1) for the first time, when I send the request to Production Service URL, the report gets generated. For the next time when we are running against Development, it's giving below certificate error.
sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
(2) Now restart resin and run the test client against Developemnt service URL, here report gets generated and for the next time, run the test client against Production, it's giving the certificate error.
So for the 2nd request, it always gives the error irrespective of the web service instance selected.
Please suggest ....thanks in advance.Hi ,
No, due to the issue is happening only on one computer.
The error "(401) Unauthorized" usually indicates that the connection has been established but the permission check fails. InfoPath Form Services uses the application pool identity of the web
application to connect to resources.
Does the account which login the computer have permission to connect to User Profile Service Application?
For a workaround, you can go to IIS Manager , set the User Profile Application Pool to Anonymous Access and try again.
Also you can have a look at the blog:
http://sharepointconnoisseur.blogspot.in/2011/04/how-to-resolve-401-unauthorized-error.html
Best Regards,
Eric
Eric Tao
TechNet Community Support -
HP Connection manager service not installed. Application will exit
I'm actually having a number of problems with this laptop, but I figured I'd start with this one. I get the message "HP connection manager service not installed. Application will exit.
As strange as this may seem, when I get this message, I also cannot open any of the folders on my desktop. I don't know if the problems are related or not.
Any help is appreicated !
If this helps its model number is A5F92AVHi @krazykat_randi ,
Welcome to the HP Forums!
It is a superb place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having multiple issues with your notebook, one of which is when you try to open the connection manager you get the message "HP connection manager service not installed. Application will exit.". You also can not open folders on your desktop.
Have you checked for viruses or malware? MS Malicious Software Removal Tool.
This is not a recommendation but many people have used Malwarebytes with success also.
Have you tried running MS Fix It to aid with overcoming issues?
Have you tried doing a restore back to when it was working properly?
If you still have issues I suggest you do a recovery back to factory.
HP PCs - Performing an HP system recovery (Windows 7)
If you have not yet done a backup you will have an opportunity during the recovery to do one.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Installing Oracle10g Grid Control - - - management service hostname
Oracle 11g R1 RHEL 4 64bit
Grid Control 10.2.0.4
HI All,
I am installing the Oracle agent and when I get to the 'Specify Oracle Management Service Location' screen it asks for the 'Management Service Host Name'. Is this the same as my database server hostname? I'm not sure what to put here. When I do put the database server hostname in, then it says it can't locate port 4889 on that server. However, if you keep going through the install everything succeeds in the end. BUT, when I go to the link http://<management_service_hostname>:4889/em then nothing shows up. I am new with grid control. Anyone have any ideas?
Thanks.Great. Thanks for your reply Bobcatalog!
Now I just want to get this all cleared up before I proceed with the installation. So here is what I am thinking of doing and please tell me if I am wrong, missing something or should do it another way.
1. Install OEM Grid Control 10.2.0.3 on a new host (server) which has nothing on it (i.e. no Oracle products - - - clean host) and then patch it to 10.2.0.4.
- I will use the create new database option, which will create the EM Repository database
- I will (or it will) install the OMS as well as the OMA (Oracle management Agent)
(Question: Should I install OEM Grid Control on just a regular filesystem or use ASM with it? I heard that there are issues with using ASM. If it will increase my chances of failure, then I will stay away from it...even though all our environments (DEV, PROD, QA) use ASM.
2. Install the OMA agent on each of the database servers (which are called 'targets') that I want to monitor.
And that is all that I will need to do, correct?
Thank you. -
Views on multiple ExtendProxy services in same cluster
Hi,
I would like to load-balance 2 sets of clients for the same cluster such that each client set is balanced separately. The motivation is that one set is quite small and the other is much larger so it can happen that the clients in the smaller set all end up connecting to proxies on one host, instead of proxies on different hosts.
I can think of 3 ways fo doing this:
1) Create a ExtendProxy service, with 2 sub options:
a) is it possible to expose to have an ExtendProxy JVM expose multiple proxy services (ExtendProxyService1, ExtendProxyService2).
b) Running 2 parallel sets of ExtendPorxy JVMs
2) Moving the load balancing out fo the proxy service (to an F5 BigIp in my case) and setting up 2 pools withthe same members. That avoids touching the cluster at all.
Any opinions?Am I to understand that you have two managed servers, and you have two admin servers, both managing the two managed servers?
That doesn't make sense. You shouldn't be managing a managed server from more than one admin server. The admin server represents a single domain. You can't have a managed server that's in more than one domain. -
Production Manager (Service)-FLU000433
OPCO Description
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. We are a dynamic market leader with sound financial health. Fluke has achieved the number one or number two position in every market in which it competes. The Fluke brand has a reputation for portability, ruggedness, safety, ease of use and rigid standards of quality. A wholly owned subsidiary of Danaher Corporation (www.danaher.com), Fluke is a multi-national corporation headquartered in the greater Seattle area. We offer an entrepreneurial environment that is team-centered, customer-driven, quality-focused, and growth-oriented. It is driven by the phenomenally successful Danaher Business System. Working at Fluke gives you access to a robust career development process and challenging, “stretch” opportunities.
Description
Supervise/Manage the day-to-day operations with responsibility for producing product at minimum cost consistent with quality specifications and production schedules.
Responsibilities:
Responsible for all process within assigned area, including contributing to the development and implementation of new processes and to the continual improvement of existing processes.
Interpret and execute policies affecting organizational units, recommend modification to operational policies and ensure compliance with Company policies.
Responsible for performance appraisals of assigned employees and recommend appropriate status changes and/or salary increases.
Assure that proper records and reports are established and maintained for operations and results achieved.
Depending upon level, may determine the need for labor, space, materials and capital equipment and provide cost analysis in justifying expense.
Scope of supervisory responsibility is dependent upon management level.
Depending upon level, may have increased budgetary responsibility.
Manage daily workflow in multiple service cells
Resolve day to day production issues
Work with internal organizations to resolve parts delivery and product reliability and quality concerns
Manage daily performance to meet quality, delivery, cost and revenue metrics
Responsible for P&L performance in assign area
Qualifications
Prefer previous experience in a service environment
Knowledge of and/or experience utilizing lean principles desired.
Minimum of 3-5 year previous supervisory experience.
Note: May require occasional travel, extended hours, and on-call duty.
All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check.
Fluke is an equal opportunity employer.
www.fluke.com
www.danaher.comThread of the Necro-Dancer:
Regardless, the step Katie was apparently implying (but seems to be missing from her description) is the bit where you backup the database and restore it to a separate instance. after this is done, you can then install a new management server targeting this
new instance, and then promote the new management server to the workflow server, and run the isolated database using the new management server.
i would recommend, however, that you use
the supported method of producing a upgrade lab with production data, which is very similar to the method Katie implied, includes directions covering all of these steps involved, and allows you to periodically restore production data to the lab database
with minimal overhead.
I didn't notice the date before now. I just look at the latest unanswered posts, so not sure how I got into this one. But technet has been acting weird lately. I get an internal server error far too often.
http://codebeaver.blogspot.dk/ -
Remote Management service does not start
Has Novell got a fix for the issue where the Remote Management services
fails to start automatically on XP workstations? As we upgrade our clients
to XP, this has become a major headache. The service can be started
manually, and then the Remote Control feature of ZFD will work, providing
the firewall is disabled.Workaround is to create a batch file and put in the command:
net start "remote management"
Create a shortcut to this batch file and put it in the startup group of
All Users in the "document and settings".
Phong Nguyen
> Novell Client 4.91 will not include any of ZFD 3.x services so you'll
need
> to upgrade to 4 or preferrably ZDM 6.5. This weekend I kicked off a
ZFD 3.2
> SP3 to 6.5 SP1 migration. Even without the extra services its worth it
just
> from a support stand point.
>
> Do the details posted in this thread help any?...
>
> Newsgroups: novell.support.zenworks.desktops.3x.remote-control
> Subject: ZfD3.2, NetWare 6.0, XPsp2, will it work?
> Message-ID: <azXhd.717$[email protected]>
> Date: Wed, 03 Nov 2004 02:41:10 GMT
>
> 1. Set Windows Firewall/ICS service to manual
> 2. Set Windows Firewall/ICS service to start before Remote Management
(ie.
> Remote Management service depends on Firewall/ICS and Workstation
Manager
> services)
> 3. Configure Windows Firewall exceptions for wuser32.exe, open ports
1761 -
> 1763 (you need others depends on the services you use, see TID below)
>
> What Ports are used by ZENworks Remote Management Agent?
> http://support.novell.com/cgi-bin/se...?/10054960.htm
>
> Support for Windows XP SP2 on ZENworks for Desktops
> http://support.novell.com/cgi-bin/se...?/10092958.htm
>
> --
> Tony Pedretti
>
> -
CRS-4535: Cannot communicate with Cluster Ready Services
[oracle@bnl11237dat01 ~]$ /u01/app/11.2.0/grid/bin/cluvfy stage -post crsinst -n bnl11237dat01,bnl11237dat02 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "bnl11237dat01"
Destination Node Reachable?
bnl11237dat01 yes
bnl11237dat02 yes
Result: Node reachability check passed from node "bnl11237dat01"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
bnl11237dat02 passed
bnl11237dat01 passed
Result: User equivalence check passed for user "oracle"
ERROR:
Unable to obtain network interface list from Oracle Clusterware (OIFCFG)
Verification cannot proceed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@bnl11237dat01 ~]$ oifcfg iflist
bond1 10.32.25.160
bond2 10.32.17.200
bond2 169.254.0.0
bond0.1515 10.32.24.0
bond0.1536 172.16.7.0
[oracle@bnl11237dat01 ~]$ oifcfg iflist -p
bond1 10.32.25.160 PRIVATE
bond2 10.32.17.200 PRIVATE
bond2 169.254.0.0 UNKNOWN
bond0.1515 10.32.24.0 PRIVATE
bond0.1536 172.16.7.0 PRIVATE
[oracle@bnl11237dat01 ~]$ oifcfg iflist -p -n
bond1 10.32.25.160 PRIVATE 255.255.255.240
bond2 10.32.17.200 PRIVATE 255.255.255.248
bond2 169.254.0.0 UNKNOWN 255.255.0.0
bond0.1515 10.32.24.0 PRIVATE 255.255.255.192
bond0.1536 172.16.7.0 PRIVATE 255.255.255.0
[oracle@bnl11237dat01 ~]$ /u01/app/11.2.0/grid/bin/onsctl debug
HTTP/1.1 200 OK
Content-Length: 1923
Content-Type: text/html
Response:
== bnl11237dat01:6200 8732 11/05/19 11:44:09 ==
Home: /u01/app/11.2.0/grid
======== ONS ========
IP ADDRESS PORT TIME SEQUENCE FLAGS
127.0.0.1 6200 4dd4f2a3 00000000 00000008
Listener:
TYPE BIND ADDRESS PORT SOCKET
Local 127.0.0.1 6100 5
Remote any 6200 7
Remote any 6200 -
Connection Topology: (1)
IP PORT VERS TIME
127.0.0.1 6200 4 4dd4f2a3=
Client connections:
ID CONNECTION ADDRESS PORT FLAGS SENDQ REF SUB W
0 internal 0 01008a 00000 001 002
2 127.0.0.1 6100 01001a 00000 001 001
1 127.0.0.1 6100 01001a 00000 001 001
3 127.0.0.1 6100 01001a 00000 001 001
4 127.0.0.1 6100 01001a 00000 001 001
7 127.0.0.1 6100 01001a 00000 001 000
request 127.0.0.1 6100 03201a 00000 001 000
Worker Ticket: 10/10, Last: 11/05/19 11:42:21
THREAD FLAGS
40460940 00000012
405b4940 00000012
41280940 00000012
Resources:
Notifications:
Received: Total 0 (Internal 0), in Receive Q: 0
Processed: Total 0, in Process Q: 0
Pool Counts:
Message: 1, Link: 1, Ack: 1, Match: 1
[oracle@bnl11237dat01 ~]$
[root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl stop crs
CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.crsd' on 'bnl11237dat01'
CRS-2790: Starting shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.bnl11237dat01.vip' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.oc4j' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.cvu' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER.lsnr' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.bnl11237dat01.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.cvu' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.LISTENER_SCAN1.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.scan1.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.LISTENER.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.bnl11237dat02.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.LISTENER_SCAN3.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.scan3.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.LISTENER_SCAN2.lsnr' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.scan2.vip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.scan1.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.bnl11237dat02.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.scan3.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.scan2.vip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.oc4j' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.ons' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.ons' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.net1.network' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.net1.network' on 'bnl11237dat01' succeeded
CRS-2792: Shutdown of Cluster Ready Services-managed resources on 'bnl11237dat01' has completed
CRS-2677: Stop of 'ora.crsd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.crf' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.ctssd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.evmd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.mdnsd' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.crf' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.evmd' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.ctssd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.cssd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'bnl11237dat01'
CRS-2673: Attempting to stop 'ora.diskmon' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.gipcd' on 'bnl11237dat01' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'bnl11237dat01'
CRS-2677: Stop of 'ora.diskmon' on 'bnl11237dat01' succeeded
CRS-2677: Stop of 'ora.gpnpd' on 'bnl11237dat01' succeeded
CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'bnl11237dat01' has completed
CRS-4133: Oracle High Availability Services has been stopped.
[root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl start crs
CRS-4123: Oracle High Availability Services has been started.
[root@bnl11237dat01 ~]# /u01/app/11.2.0/grid/bin/crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
I am unable to start Oracle Cluster Service on 11.2.0.2. Please can I know what the problem is and how to start CRS
thanks.Hi,
after the crsctl start crs you have to wait a while till the clusterstack is up. You just issued crsctl check crs a little to early.
To see the startup stack do a crsctl stat res -t -init.
If not everything in crsctl stat res -t -init goes to online after a while, then you have a problem, which has to be analyzed.
However if crsctl stat res -t -init show everything is started use crsctl stat res -t to see the other processes coming online.
Can you post the crsctl stat res -t -init (if not everything is online) or a crsctl stat res -t.
Only thing which I find strange is that oifcfg does not list a PUBLIC interface...
Regards
Sebastian -
User Management Service API javadoc
According to the following document:
http://help.sap.com/saphelp_nw2004s/helpdata/en/f7/f289c67c759a41b570890c62a03519/frameset.htm
I can use the User Management Service interface to check authorizations:
"You can use the User Management Service to check the authorizations; there are various interfaces and methods available for this purpose."
Where are these interfaces and methods documented? I searched help.sap.com for "User Management Service" but am not able to find the javadoc API documentation.Hey David,
I must have misunderstood your question as I thought you couldn't "...figure out how to integrate these both elements through service link, with an agent and adapters." - Starter Edition has a reusable approach.
I'm interested in understanding where the user management features of Starter Edition aren't quite making your grade. The requirements driving Starter Edition's feature set are as they pertain to the enterprise as a private cloud deployment. Given this environment, the two primary deployment scenarios SE addresses are 1) no external user account data source (no directory integration), 2) external data source integration using one of the three types of directory servers supported by Cloud Portal. Scenario 2 two supports user authentication only and user authentication and authorization.
Scenario 1 supports user and organization management using Cloud Portal as the data source. Scenario 2 supports a pre-populated data source under the premise that enterprises most commonly have a existing directory services they desire to integrate with the solution, which is to say that an uncommon and not natively supported scenario is one in which the enterprise has no existing user account data source, but has idle directory services they would like for the solution to populate with new user accounts created through he solution. Certainly, such a scenario may be supported by extending the solution.
Let me know how you come along.
Regards,
Lee
Sent from Cisco Technical Support iPhone App -
IPS Tech Tips: IPS Best Practices with Cisco Remote Management Services
Hi Folks -
Another IPS Tech Tip coming up and this time we will be hearing from some past and current Cisco Remote Services members on their best practice suggestions. As always these are about 30 minutes of content and then Q&A - a low cost high reward event.
Hope to see you there.
-Robert
Cisco invites you to attend a 30-45 minute Web seminar on IPS Best Practices delivered via WebEx. This event requires registration.
Topic: Cisco IPS Tech Tips - IPS Best Practices with Cisco Remote Management Services
Host: Robert Albach
Date and Time:
Wednesday, October 10, 2012 10:00 am, Central Daylight Time (Chicago, GMT-05:00)
To register for the online event
1. Go to https://cisco.webex.com/ciscosales/onstage/g.php?d=203590900&t=a&EA=ralbach%40cisco.com&ET=28f4bc362d7a05aac60acf105143e2bb&ETR=fdb3148ab8c8762602ea8ded5f2e6300&RT=MiM3&p
2. Click "Register".
3. On the registration form, enter your information and then click "Submit".
Once the host approves your registration, you will receive a confirmation email message with instructions on how to join the event.
For assistance
http://www.webex.com
IMPORTANT NOTICE: This WebEx service includes a feature that allows audio and any documents and other materials exchanged or viewed during the session to be recorded. By joining this session, you automatically consent to such recordings. If you do not consent to the recording, discuss your concerns with the meeting host prior to the start of the recording or do not join the session. Please note that any such recordings may be subject to discovery in the event of litigation. If you wish to be excluded from these invitations then please let me know!Hi Marvin, thanks for the quick reply.
It appears that we don't have Anyconnect Essentials.
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has an ASA 5510 Security Plus license.
So then what does this mean for us VPN-wise? Is there any way we can set up multiple VPNs with this license? -
Setting Users for my managed services and application pools
I setup my SharePoint 2013 test environment and I developed an intranet site. Now inside my test environment I set all the application pool & managed services to use Farm user account for simplicity. Now I want to setup my UAT environment and I want
to follow the best practice for managing users and service accounts.
I have read the “Core Solutions Of MS SharePoint 2013” book, and it have listed the following table:-
First question. What is the difference when saying that the user “Must be a member of the Farm Administrators group” Or must be “Domain user account”?
Second question , when I first install SharePoint 2013 a lot of applications pools and managed services such as excel services , access services, Performance Point Service Application, business
data connectivity and Machine Translation Service will be automatically created , so which account they will be using and should I define separate accounts for each managed service ?
Third question. What is the recommendation for SharePoint 2013 regarding service accounts?, to use separate account for each manage service, for example one user for excel services , second user
for access services ,etc?
Fourth question. For example the documentation mentioned that the Required roles for the excel services is “Domain user account.”, but what permissions this domain user need to have ?
thanks for any help, and sorry so adding multiple questions inside the same post.Q #1: This means the user must be part of the Farm Admins group. Every user is a Domain User.
Q #2: Generally those should be using a single Domain User account in a single Application Pool to minimize memory usage and reduce unnecessary complexity.
Q #3: The less Application Pools the better. E.g. One account/App Pool for all Web Applications, one account/App Pool for all Service Applications, and then Central Administration is obviously separate.
Q #4: You don't need to specifically give this type of user any sort of rights
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
OWSM and Webservices -Define policies once for multiple web services
I thought that through using OWSM we had the possibility to use the same Policy Lines for multiple web services.
Mostly when web services are used/integrated within an application, the same rules need to be defined and I thought this requirement could be met when using OWSM.
But you need to define the policy requirements on each web service that's passing through a gateway or agent, why isn't it supported to define policy lines one level higher to be able to use the same requirements for multiple web services?Nathalie,
For this purpose OWSM allows you to use Template Policy Pipelines.
For individual services, you can than replace the pipeline with the Template.
But I have to agree with you here: the templating functions are rough on the edges, e.g. limited editing capabilities.
Hope this helps.
Best regards, Sjoerd
Maybe you are looking for
-
Invalidate connection to BlazeDS server when closing tab in browser
There is an issue using IE and blazeds. When you establish a connection to blazeds from a tab of your browser, even when the tab get closed, she connection remains. The session doesn't get invalidated. It looks like it works fine in Firefox but it's
-
I would like Adobe to utilize the non-legacy save/open Windows 7 dialog box
So I downloaded the trial for CS5.5 Master Suite and found that the open/save dialog box is the same thing from CS5. This is a huge disappointment. Reason being is explained right here: http://www.sanneblad.com/2010/06/18/customizing-the-open-and-sa
-
Os 4 wont download-error message
the iphone update software server can not be contacted at this time...?
-
ITrip w/ dock connector giving constant background hiss/static
i know there really isn't a forum for 3rd party gear but i thought some of you may able to help me out. i am using a 5th gen ipod. for car audio solutions: i started with the griffin roadtrip apparatus.. it was clunky and the sheer weight of the ipod
-
Camera Raw 7.4 now available
To install the updates, launch Photoshop CS6 and select Help>Updates... For more details on Camera Raw 7.4: http://blogs.adobe.com/lightroomjournal/2013/04/camera-raw-7-4-and-dng-converter-7-4-now-a vailable.html For more details on keeping Photoshop