Agent Config issue

Hi all,
I have central repository server where agent and other services are running. Where as on one of there agent running (target server) there was an issue with time zone. Which was corrected by me.
But now issue I have removed that target from OEM, after resolving the issue I tried to configure through OEM it is asking I can not do this, target machine automatically visible on OEM when I finish agent installation or setup on target machine.
If any one knows how to fix this issue with out reinstalling the agent can highly appreciate.
Thanks in advance.
Regards,
RK.

Thanks to both of you.
I made changes and seems like agent going down after it has started.
here are some log files
Below is emdctl.trc
2007-06-05 09:36:04 Thread-1 WARN http: snmehl_connect: connect failed to (ccdctmtu1.tnt:3872): Connection refused (error = 146)
2007-06-05 09:36:04 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://ccdctmtu1.tnt:3872/emd/main/. Returning status code 1
2007-06-05 09:38:03 Thread-1 WARN http: snmehl_connect: connect failed to (ccdctmtu1:3872): Connection refused (error = 146)
2007-06-05 09:38:03 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://ccdctmtu1:3872/emd/main/. Returning status code 1
2007-06-05 09:38:04 Thread-1 WARN http: snmehl_connect: connect failed to (ccdctmtu1:3872): Connection refused (error = 146)
2007-06-05 09:38:04 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://ccdctmtu1:3872/emd/main/. Returning status code 1
2007-06-05 09:39:53 Thread-1 WARN http: snmehl_connect: connect failed to (ccdctmtu1:3872): Connection refused (error = 146)
2007-06-05 09:39:53 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://ccdctmtu1:3872/emd/main/. Returning status code 1
Below is emagent.log
007-06-05 09:38:05 Thread-1 Starting Agent 10.2.0.2.0 from /opt/oracle/dbms/agent10g (00701)
2007-06-05 09:38:05 Thread-1 [E-Mail IMAP Server] InstanceProperty (imap_host) is marked OPTIONAL but is being used (00506)
2007-06-05 09:38:06 Thread-1 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2007-06-05 09:38:08 Thread-1 [E-Mail POP Server] InstanceProperty (pop_host) is marked OPTIONAL but is being used (00506)
2007-06-05 09:38:08 Thread-1 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used (00506)
2007-06-05 09:38:08 Thread-1 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)
2007-06-05 09:38:08 Thread-1 [E-Mail SMTP Inbound Server] InstanceProperty (smtp_host) is marked OPTIONAL but is being used (00506)
2007-06-05 09:38:08 Thread-1 [E-Mail SMTP Outbound Server] InstanceProperty (smtp_host) is marked OPTIONAL but is being used (00506)
2007-06-05 09:38:10 Thread-1 Skipping target {documtm, oracle_database}: Missing properties - password (00151)
2007-06-05 09:38:10 Thread-1 Skipping target {dctmctrl, oracle_database}: Missing properties - password (00151)
2007-06-05 09:38:10 Thread-1 Skipping target {regdctm, oracle_database}: Missing properties - password (00151)
2007-06-05 09:38:19 Thread-1 EMAgent started successfully (00702)
2007-06-05 09:38:19 Thread-21 <Upload Manager> Exceeded Max allowed Upload data - No of files: 151, Size of upload data: 81.337722MB, Pct() of Disk used: 39
.14%, Disabling collections (00852)
2007-06-05 09:38:19 Thread-21 Disable collector (00406)
2007-06-05 09:39:51 Thread-33 <Upload Manager> Unsuccessful Upload attempts for XML file exceeds specified limit=3, Agent will shutdown (00851)
2007-06-05 09:39:51 Thread-1 EMAgent abnormal terminating (00704)
Let me know if I should check some thing else

Similar Messages

  • Agent determination issue with no error, cant use SWPR?

    Hello gurus.
    We currently have 81 invoices that have workflow status "in process". However, the last line of this status is "agent determination issue". I've assigned the appropriate user in PFOM and i want to restart the workflow item, but i cannot use SWPR.
    Normally it should be in error and you can use SWPR, and that fixes everything- however why is the workflow still "in process" and not in error? and how can i complete the workflow item now that the agent has been assigned? do i just create a new workflow using SWUE and delete the old one? Many thanks.

    Hi,
    OK then try like this , as you said you do not have authorizations to SWI1_RULE right so do teh below steps,
    1. Execute SE37 and execute the fucntion module ALINK_CALL_TRANSACTION.
    2. Now mention the txn name as SWI1_RULE.
    3. Now you should be able to see teh initial screen of the txn.
    4. Now enter teh workitem ID which is in ready state not the top workitem ID, the workitem for which the agent is not assigned. Click F8.
    5. Now choose that workitem ID and click CTRL + SHIFT + F11.
    it should re evalutae the agents, if this is also not determing then make a note of the RULE ID from activity step and open the txn by using the above function module and try to simulate the rule or please let us know what is the rule type.
    Regards
    Pavan

  • I can sync bookmarks on my Firfox for android, but folders aren't sync, i can only get bookmarks from bookmarks main folder. Is a bug or a config issue?

    I can sync bookmarks in firefox for android, but only the ones that are on Bookmarks main folder, the folders create below the main folder are not synchronized. Is this a bug or a config issue?
    Thanks

    Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

  • 851 Router Config Issue

    Hi all,
    Hopefully this will be a nice easy one for you all.
    I have recently configured and installed an 851 router successfully :) I now only have one issue, the damn thing switches itself off after a period of inactivity!
    If I want to use it again I have to issue a reset command then a boot command.
    This takes me to the:
    router>
    prompt. I then have to issue a copy start run command. And then a no shut on each of my interfaces.
    Obviously I would just like the router to stay up and running. But I cant work out how to do it. Im sure that this is just a simple config issue and I would dearly love for you all to solve it!
    If any of you know the answer can you please provide clear an accurate commands as I will copy it parrott fashion into the router.
    Thank you all in advance.
    Stuart

    Hello,
    as spremkumar already pointed out the config register usually is set to 0x2102. You can reconfigure the register by:
    Router#configute terminal
    Router(config)#config-register 0x2102
    Router(config)#end
    Then perform a reload and check whether the config is present after the router finished booting.
    Hope this helps! Please rate all posts.
    Regards, Martin

  • SCOM Agent installation Issue

    Dear all,
    We have SCOM 2012 r2 , when we install agent through discovery . We got the below error
    The Operations Manager Server cannot process the install/uninstall request for computer xxxxx due to failure of operating system version verification.
    Operation: Agent Install
    Install account: XXXXX
    Error Code: 80070035
    Error Description: The network path was not found.
    Any idea what would be the issue here ?
    Gone through some forum , but no luck
    http://www.scapaot.de/blog/?p=291
    Thanks,
    74KMS

    Hi
    Kevin Holman has a great blog on troubleshooting agent install issues here:
    http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
    The error you state has "Manual Agent Install" as the "fix".
    Could you confirm:
    1. The agent is in the same domain as the SCOM Management Server?
    2. Can you do an NSLookup from the Management Server to the agent FQDN?
    3. If you try and install the agent manually, do you get an error or does it complete?
    Cheers
    Graham

  • Issues with running controller-agent config on OLT .

    Hi All,
    I have 3 machines total. One is windows 2008 (controller / server) and other two are RHEL 5.2(agents). I have the same script in all 3 locations. Running the scripts individually in all 3 environments works fine. The scripts read the local databanks which is csv that has the paths for JAVA_HOME to execute jar and generate secret key. From controller(windows box) I clicked on Manage --> Systems and added the agent details and was successfully done. From controller, I added the script, set the system pointing to agent's name and ran the test, the scripts fail at the point where the secret key gets generated using the Jar. My guess is controller is able to read the local path from CSV and not able to generate the secret keys using local java_home and jar. Can anyone kindly comment on this issue.
    Thanks,
    Nags.

    We are running SCOM 2012 server and have deployed the agent successfully to a number of Red Hat Linux servers. I am having an issue on about a quarter of the hosts, in that they appear as HEALTHY but are Grayed out and not green. When I look at the /var/opt/microsoft/scx/log/omiserver.log
    file I see:
    WARNING: wsman: authentication failed for user scom2012
    I have verified that the system account is setup with the correct password and the runas account is setup with the correct password (i am able to deploy the agent from the SCOM server using it, so the passwords DO match).
    Any ideas? 
    I've seen this on a few systems here when the agent has been upgraded but the old agent process does not die off.  Just to rule it out, pick a node, make sure there are no instances of scxcimserver or scxcimprovagt and then start the agent and
    see if the issue goes away.  I've also seen wsman authentication failures related to the libssl issue that was fixed in yesterday's release.

  • OIF+OAM: install/config  issues

    This post is long. Hoping that at least one of the issues is seen by someone or someone has insights before we open SR(s) with Oracle.
    We have a working OAM/OVD 11.1.1.5 installation (done according to the EDG at http://docs.oracle.com/cd/E21764_01/core.1111/e12035/toc.htm).
    We started an evaluation of OIF and ran into some issues grouped under Install and Config categories.
    h2. Install issues:
    We installed it per chapter 16 of that EDG and and all the steps went OK except step 16.7 (http://docs.oracle.com/cd/E21764_01/core.1111/e12035/oif.htm#BAJCJHBG).The config properties userldaphaenabled, fedldaphaenabled are getting set via WLST but don't appear to be persisted anywhere. On a restart they are false again. Are they supposed to be saved to config.xml of the IDMDomain? Can I try adding them manually like this as child elements under each of the wls_oif managed servers?
    <datastore>
    <userldaphaenabled>true</userldaphaenabled>
    <fedldaphaenabled>true</fedldaphaenabled>
    </datastore>
    If those settings were properly set what is it supposed to do? I can see that config.xml, cots.xml files are stored as blobs in one of the OIF db tables. Will the above setting move them from DB to LDAP?
    h2. Config/Runtime Issues:
    We proceeded with configuration because the /sp/metadata and /idp/metadata test URLs are working fine via the VIP address. we used this manual to do the integration.
    http://docs.oracle.com/cd/E21764_01/doc.1111/e15740/oif.htm#CACJDDGE. In section 4.3.1.6 (Configure Oracle Identity Federation in SP Mode) of this document it says to configure Oracle SSO. We only have OAM and not osso. We went ahead and configured the second tab (OAM) in the screen capture in that section as well (is there any documentation on how to configure that tab?)
    In SP mode (section 4.3) , testing of a resource protected with OIFScheme in OAM is not successful. It does not show any OIF login screen. Instead it takes the user to through these URLs:
         1.     https://sso.company.com/test-app/
         2.     https://sso.company.com/fed/user/sposso  
         3.     https://sso.company.com/fed/user/authnoam?refid=id-tB20kXzmHjpn6MUSdOr7qbmd2OU-
         4.     https://sso.company.com/fed/sp/art20?SAMLart=AAQAAbV1ElKBtte9uuhKoeo4h%2FMufCdY2wDlDIM2T9dL%2BvhsvtfUrwCuZg8%3D&RelayState=id-JPh8MY05pAZRckl4yOc2J4-80GI-
    and then shows this error in the browser:
    Error 401--Unauthorized
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.2 401 Unauthorized
    The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11.
    The following errors are seen in the WLS_OIF1 (we turned off WLS_OIF2 during this test) managed server logs:
    <Mar 10, 2012 10:58:37 AM PST> <Error> <oracle.security.fed.eventhandler.authn.engines.oam.OAMAuthnEventHandler> <FED-18068> <Authentication failed: WebGate did not authenticate the user>
    <Mar 10, 2012 10:58:37 AM PST> <Emergency> <oracle.security.fed.model.config.Configuration> <FED-10174> <Property was not found: httpheaderattrcollector.>
    <Mar 10, 2012 10:59:27 AM PST> <Warning> <oracle.security.fed.http.handlers.authn.LoginRequestHandler> <FED-18051> <Authentication instant was not sent from the authentication engine.>
    <Mar 10, 2012 10:59:37 AM PST> <Error> <oracle.security.fed.util.ssl.KeystoreUtil> <FED-18080> <Could not retrieve key from the key store. Please verify that the key password is equal to the key store
    < this error is followed by an exception shown below>
    <Mar 10, 2012 10:59:39 AM PST> <Error> <oracle.security.fed.eventhandler.authn.engines.osso.OssoFinishSPSSOEventHandler> <FED-15134> <The service providercould not map the identity provider response to a user>
    FED-18080 exception:
    java.security.UnrecoverableKeyException: Cannot recover key
         at sun.security.provider.KeyProtector.recover(KeyProtector.java:311)
         at sun.security.provider.JavaKeyStore.engineGetKey(JavaKeyStore.java:121)
         at sun.security.provider.JavaKeyStore$JKS.engineGetKey(JavaKeyStore.java:38)
         at java.security.KeyStore.getKey(KeyStore.java:763)
         at com.sun.net.ssl.internal.ssl.SunX509KeyManagerImpl.<init>(SunX509KeyManagerImpl.java:113)
         at com.sun.net.ssl.internal.ssl.KeyManagerFactoryImpl$SunX509.engineInit(KeyManagerFactoryImpl.java:48)
         at javax.net.ssl.KeyManagerFactory.init(KeyManagerFactory.java:239)
         at oracle.security.fed.util.ssl.KeystoreUtil.createKeyManagers(Unknown Source)
         at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSSLContext(Unknown Source)
         at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.getSSLContext(Unknown Source)
         at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSocket(Unknown Source)
         at oracle.security.fed.util.soap.OIFSSLProtocolSocketFactory.createSocket(Unknown Source)
         at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707)
         at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(MultiThreadedHttpConnectionManager.java:1361)
         at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:387)
         at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
         at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
         at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:346)
         at oracle.security.fed.util.soap.SimpleSoapSender.sendMessage(Unknown Source)
         at oracle.security.fed.http.flow.profiles.sp.SendSoapRequestSSOResponseHandler.perform(Unknown Source)
         at oracle.security.fed.controller.ApplicationController.processServletRequest(Unknown Source)
         at oracle.security.fed.controller.web.servlet.FederationServlet.doGet(Unknown Source)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    A minor other problem seems to be with adcri:
    Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "Cannot run program "/app/iam/middleware/wlserver_10.3/server/adr/adrci": java.io.IOException: error=12, Cannot allocate memory"
    Action: Ensure that command line tool "adrci" can be executed from the command line.
    We can run the adcri tool from command line using the same LD_LIBRARY_PATH as used by the wls_oif1 server. Why is it trying to run it and failing and what is it trying to do? Can we turn it off?

    I reinstalled the suite. This time, during the Policy Manager install I left the "Root Directory for Policy Domains" (step/page 7-12) at the default, which was "/". The GUI now works correctly.
    On the previous install I changed the path to /AccessManagerPolicy -- it wasn't clear to me what the installer meant by 'root directory'. I did try to get /AccessManagerPolicy to work by creating a directory under my web root to match, but I still had issues with the Policy Domain -- the no policy domains would match. So, it looks like this parameter should never be changed in the installer.
    Aaron.

  • CCMS Agent registeration issue in Satellite system

    Hi
    I am doing CCMS alert configuration for my ECC system. Solution Manager is the system we are using for alert monitoring and ECC is Satellite system. I have created the CSMREG user in solman system also successfully placed the generated agent file in satellite system. When I trying to register the SAPCCM4X  agent, it is giving the following error :
    INFO: trying to register service SAPCCM4X.00 at Windows Service Control Manager
          starttype of service:             manual/[auto] : auto
          DomainName\UserName  or [<LocalSystem account>] : itlinfosys\e01adm
          password                            : ************OpenSCManager failed...
    ERROR: service registration failed
    HINT: Windows Service Manager may be locked.
          Close "Services" window and try again.
    INFO: Updated config file D:\usr\sap\E01\DVEBMGS00\log\sapccm4x\csmconf.
    EXITING with code 1
    Can you please help me on this issue.
    Regards,
    Mounika

    Hello,
    When you start the command prompt do as , Start -> Programs - Accessories -> right click on Command prompt, select either Run as and give administrator user / select Run as Administrator
    Regards
    Jose

  • Custom clearing agent payment issue

    Dear experts
    Purchase  order  was created  and  the  material was  received  on   port (imports).
    custom clearing  agent has  cleared  the goods.
    now   custom   clearing  agent needs  his  charges.
    the  inv  from vendor with reference to PO is not received.
    any  solution  to  settle  the  custom  clearing  agent  payments.
    till  the  inv. from  vendor  not  received custom agent payment  is is pending.
    what  should  be  done  to  resolve  this  issue.

    Hi,
    Copy one of your freight condition types and create a new condition type as custom clearing charges, please ensure that condition category is Delivery charges (B). In calculation schema enter this condition type at the appropriate position. Now when creating the PO, enter this condition type put the value, then select this condition type and go to details, here you will have a field to enter the vendor code, there key in the vendor code of custom clearing agent.
    Now in MIRO enter PO no. and choose layout for Planned delivery cost, you can now enter the value for your agent and pay him.
    Note: Please use this to pay only for service charge for the agent, for payment of custom duty you should use the condition type for custom duty and key in the vendor code for the customs clearing office there so that its easy to differentiate between custom duty and the service charges charged by clearing agent.
    Regards
    Chandra Shekhar

  • HP LaserJet p1102w with Mac OS X10.6.8 HTML config issue

    Hello, 
    I have been using this printer for a few years now and have moved house a few times and successfully updated the wireless settings on the printer through HTML config. Lately, in printer utilities the HTML config button does not show up where it is meant to.
    I have installed / uninstalled the latest firmware, software drivers, printers and made sure they were platform specific.
    This is really annoying. 
    Is there old software available for download? it was working fine until the recent update - which I did so I could use the eprint features.
    Best regards
    Costas
    Printer: 
    HP LaserJet p1102w, Firmware datacode = 20130213
    Computer:
    Macbook white, late 2008 model: 2.4Ghz Core2Duo, 4G RAM with OS X 10.6.8

    From the name of the printer, it looks like you have it installed through a USB connection. 
    Here is what I would. First go into “System Preferences” and then select either  “Print & Scan” or "Print & Fax".
    Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”.  
    NOTE: This will delete all printers. 
    After you have reset the printing system, let's make sure you have the most recent HP driver package installed. 
    You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
    Once you have downloaded the driver package and completed the installation, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus (+) sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box.  Make sure that says the name of your printer and not AirPrint. Next make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
    This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • LIRC-0.9.1: Remote not working, scancodes, config issues

    Hi,
    I'm using arch (kernel 3.16.0-2-ARCH #1 SMP PREEMPT x86_64 GNU/Linux), a TechnoTrend USB IR Receiver and my custom remote (not covered by existing configs). I installed lirc and lirc-utils via testing repo (lirc-0.9.1). My problem is that I can access my device, but irw gives me no output at all.
    At first some outputs:
    ir-keytable:
    Found /sys/class/rc/rc0/ (/dev/input/event17) with:
    Driver ttusbir, table rc-tt-1500
    Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
    Enabled protocols: RC-5
    Name: TechnoTrend USB IR Receiver
    bus: 3, vendor/product: 0b48:2003, version: 0x0101
    Repeat delay = 500 ms, repeat period = 125 ms
    output of "ir-keytable -t" for numbers 1-6 on my remote:
    Testing events. Please, press CTRL-C to abort.
    1408117586.815011: event type EV_MSC(0x04): scancode = 0x01
    1408117586.815011: event type EV_SYN(0x00).
    1408117586.934967: event type EV_MSC(0x04): scancode = 0x01
    1408117586.934967: event type EV_SYN(0x00).
    1408117587.702986: event type EV_MSC(0x04): scancode = 0x02
    1408117587.702986: event type EV_SYN(0x00).
    1408117588.366958: event type EV_MSC(0x04): scancode = 0x03
    1408117588.366958: event type EV_SYN(0x00).
    1408117588.486983: event type EV_MSC(0x04): scancode = 0x03
    1408117588.486983: event type EV_SYN(0x00).
    1408117589.094926: event type EV_MSC(0x04): scancode = 0x04
    1408117589.094926: event type EV_SYN(0x00).
    1408117589.214920: event type EV_MSC(0x04): scancode = 0x04
    1408117589.214920: event type EV_SYN(0x00).
    1408117590.926837: event type EV_MSC(0x04): scancode = 0x05
    1408117590.926837: event type EV_SYN(0x00).
    1408117591.046834: event type EV_MSC(0x04): scancode = 0x05
    1408117591.046834: event type EV_SYN(0x00).
    1408117592.446769: event type EV_MSC(0x04): scancode = 0x06
    1408117592.446769: event type EV_SYN(0x00).
    1408117592.566769: event type EV_MSC(0x04): scancode = 0x06
    1408117592.566769: event type EV_SYN(0x00).
    My remote config file looks like this:
    # Please make this file available to others
    # by sending it to <[email protected]>
    # this config file was automatically generated
    # using lirc-0.9.0(devinput) on Thu Aug 7 15:10:35 2014
    # contributed by
    # brand: Test
    # model no. of remote control:
    # devices being controlled by this remote:
    begin remote
    name BlackFlatOne
    bits 16
    eps 30
    aeps 100
    pre_data_bits 16
    pre_data 0x0001
    post_data_bits 32
    post_data 0x00000001
    gap 132799
    toggle_bit 0
    begin codes
    KEY_POWER 0x0c
    KEY_MUTE 0x0a
    KEY_SELECT 0x38
    KEY_Z 0x0f
    KEY_1 0x01
    KEY_2 0x02
    KEY_3 0x03
    KEY_4 0x04
    KEY_5 0x05
    KEY_6 0x06
    KEY_7 0x07
    KEY_8 0x08
    KEY_9 0x09
    KEY_0 0x00
    KEY_TV 0x1e
    KEY_LEFT 0x11
    KEY_RIGHT 0x10
    KEY_UP 0x20
    KEY_DOWN 0x21
    KEY_ENTER 0x0d
    KEY_CHANNELUP 0x12
    KEY_CHANNELDOWN 0x13
    KEY_VOLUMEUP 0x2b
    KEY_VOLUMEDOWN 0x2c
    KEY_STOP 0x0b
    KEY_RECORD 0x1f
    KEY_CAMERA 0x0e
    KEY_ESC 0x29
    end codes
    end remote
    I start lirc manually with
    lircd --driver=devinput --device=/dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir BlackFlatOne -n
    After starting lirc, I start irw, but I get no response at all when pressing buttons on my remote.
    I already tried a
    cat /dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir
    (lirc and irw not running, of course) and this gives me cryptic symbols when pressing buttons on my remote, so the IR receiver doesn't seem to be the problem.
    I'm wondering if the scancodes in my config are ok for a devinput-device, because the latest "official" lircd.conf.devinput looks like that:
    # generated by devinput.sh
    begin remote
    name devinput
    bits 16
    eps 30
    aeps 100
    pre_data_bits 16
    pre_data 0x0001
    post_data_bits 32
    post_data 0x00000001
    gap 132799
    toggle_bit 0
    begin codes
    KEY_0 11
    KEY_102ND 86
    KEY_1 2
    KEY_2 3
    KEY_3 4
    KEY_4 5
    KEY_5 6
    KEY_6 7
    KEY_7 8
    KEY_8 9
    KEY_9 10
    KEY_A 30
    KEY_AB 0x196
    KEY_ADDRESSBOOK 0x1ad
    KEY_AGAIN 129
    So I'm wondering about the different lengths of the keycodes (e.g. 0x0d vs 0x1ad -> 2 vs 3 digits).
    Can anyone help me out with this issue ?
    Am I missing something ?
    How do I have to format the scancodes/keycodes the correct way for version 0.9.1 ?

    Hi,
    I'm using arch (kernel 3.16.0-2-ARCH #1 SMP PREEMPT x86_64 GNU/Linux), a TechnoTrend USB IR Receiver and my custom remote (not covered by existing configs). I installed lirc and lirc-utils via testing repo (lirc-0.9.1). My problem is that I can access my device, but irw gives me no output at all.
    At first some outputs:
    ir-keytable:
    Found /sys/class/rc/rc0/ (/dev/input/event17) with:
    Driver ttusbir, table rc-tt-1500
    Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
    Enabled protocols: RC-5
    Name: TechnoTrend USB IR Receiver
    bus: 3, vendor/product: 0b48:2003, version: 0x0101
    Repeat delay = 500 ms, repeat period = 125 ms
    output of "ir-keytable -t" for numbers 1-6 on my remote:
    Testing events. Please, press CTRL-C to abort.
    1408117586.815011: event type EV_MSC(0x04): scancode = 0x01
    1408117586.815011: event type EV_SYN(0x00).
    1408117586.934967: event type EV_MSC(0x04): scancode = 0x01
    1408117586.934967: event type EV_SYN(0x00).
    1408117587.702986: event type EV_MSC(0x04): scancode = 0x02
    1408117587.702986: event type EV_SYN(0x00).
    1408117588.366958: event type EV_MSC(0x04): scancode = 0x03
    1408117588.366958: event type EV_SYN(0x00).
    1408117588.486983: event type EV_MSC(0x04): scancode = 0x03
    1408117588.486983: event type EV_SYN(0x00).
    1408117589.094926: event type EV_MSC(0x04): scancode = 0x04
    1408117589.094926: event type EV_SYN(0x00).
    1408117589.214920: event type EV_MSC(0x04): scancode = 0x04
    1408117589.214920: event type EV_SYN(0x00).
    1408117590.926837: event type EV_MSC(0x04): scancode = 0x05
    1408117590.926837: event type EV_SYN(0x00).
    1408117591.046834: event type EV_MSC(0x04): scancode = 0x05
    1408117591.046834: event type EV_SYN(0x00).
    1408117592.446769: event type EV_MSC(0x04): scancode = 0x06
    1408117592.446769: event type EV_SYN(0x00).
    1408117592.566769: event type EV_MSC(0x04): scancode = 0x06
    1408117592.566769: event type EV_SYN(0x00).
    My remote config file looks like this:
    # Please make this file available to others
    # by sending it to <[email protected]>
    # this config file was automatically generated
    # using lirc-0.9.0(devinput) on Thu Aug 7 15:10:35 2014
    # contributed by
    # brand: Test
    # model no. of remote control:
    # devices being controlled by this remote:
    begin remote
    name BlackFlatOne
    bits 16
    eps 30
    aeps 100
    pre_data_bits 16
    pre_data 0x0001
    post_data_bits 32
    post_data 0x00000001
    gap 132799
    toggle_bit 0
    begin codes
    KEY_POWER 0x0c
    KEY_MUTE 0x0a
    KEY_SELECT 0x38
    KEY_Z 0x0f
    KEY_1 0x01
    KEY_2 0x02
    KEY_3 0x03
    KEY_4 0x04
    KEY_5 0x05
    KEY_6 0x06
    KEY_7 0x07
    KEY_8 0x08
    KEY_9 0x09
    KEY_0 0x00
    KEY_TV 0x1e
    KEY_LEFT 0x11
    KEY_RIGHT 0x10
    KEY_UP 0x20
    KEY_DOWN 0x21
    KEY_ENTER 0x0d
    KEY_CHANNELUP 0x12
    KEY_CHANNELDOWN 0x13
    KEY_VOLUMEUP 0x2b
    KEY_VOLUMEDOWN 0x2c
    KEY_STOP 0x0b
    KEY_RECORD 0x1f
    KEY_CAMERA 0x0e
    KEY_ESC 0x29
    end codes
    end remote
    I start lirc manually with
    lircd --driver=devinput --device=/dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir BlackFlatOne -n
    After starting lirc, I start irw, but I get no response at all when pressing buttons on my remote.
    I already tried a
    cat /dev/input/by-id/usb-TechnoTrend_AG_TT-USB_Infrared_Device-event-ir
    (lirc and irw not running, of course) and this gives me cryptic symbols when pressing buttons on my remote, so the IR receiver doesn't seem to be the problem.
    I'm wondering if the scancodes in my config are ok for a devinput-device, because the latest "official" lircd.conf.devinput looks like that:
    # generated by devinput.sh
    begin remote
    name devinput
    bits 16
    eps 30
    aeps 100
    pre_data_bits 16
    pre_data 0x0001
    post_data_bits 32
    post_data 0x00000001
    gap 132799
    toggle_bit 0
    begin codes
    KEY_0 11
    KEY_102ND 86
    KEY_1 2
    KEY_2 3
    KEY_3 4
    KEY_4 5
    KEY_5 6
    KEY_6 7
    KEY_7 8
    KEY_8 9
    KEY_9 10
    KEY_A 30
    KEY_AB 0x196
    KEY_ADDRESSBOOK 0x1ad
    KEY_AGAIN 129
    So I'm wondering about the different lengths of the keycodes (e.g. 0x0d vs 0x1ad -> 2 vs 3 digits).
    Can anyone help me out with this issue ?
    Am I missing something ?
    How do I have to format the scancodes/keycodes the correct way for version 0.9.1 ?

  • Agent determination issue

    Hello Experts,
      We have developed one custom workflow a year back and last two months we are seeing the issue with Agent Determination randomly.  We created a position with 3 users and assigned the Position to the Agent Assignment.  Some times the work item sent to other users other than 3 users assigned to the position.  We are not able to trace it, why it's behaving like this.  Any help would be appreciated.
    with best regards
    K. Mohan Reddy

    If this happens randomely then we can only assume
    Please check the wflow log from SWIA whether someone has forwarded the workitem?
    There can be also change in Position assignment, Substitute getting maintained.
    Also check whether the users are maintained in the Task level if it is General forwarding Not allowed task from the task attribute.
    Thanks
    Arghadip

  • Ccm.config issue - cluster

    <pre>Hi there,
    XI 3.1 , Linux
    We have a very strange situation.
    We built a cluster for two servers bo1 and bo2 - they had SIA nodes called SIA1 and SIA2 respectively
    A week or two ago, the BO repository became corrupted and we had to re-initalise it
    This meant re-building the cluster. This necessitated the creatiion of a new SIA node for bo2 called SIAII (not my idea!!)
    We did this using cmsdbsetup
    This appeared to work and we appeared to have a working cluster
    We noticed yesterday that a scheduled webi doc created on bo1 that was to run every 15 minutes was intermittently failing - about 3 out of 10 instances failed.
    When we dug deeper, we were able to establish that the webi doc failed when the request was passed to bo2 - indeed it appeared to bring down the wireportserver.exe (both of them)
    We re-checked the cluster via cmsdbsetup and everything looked fine.
    Then we checked the ccm.config for bo1 and bo2 and things look a little strange. I believe a colleague may edited ccm.config incorrectly - there were 2 sets of entries in ccm.config for bo2 - one for SIA2 and another for SIAII. Perhaps the wrong one was removed/edited
    Below is the comparsion of the 2 ccm.config files (bo2 on the left; bo1 on the right)
    Neither have anything ins CLUSTER_NAMESERVER=""  - is this correct
    MYSQLHOSTNAME is incorrect on both
    CMSCLUSTER="no"  ?
    On bo2 the node name is  SIANODENAME="SIA2"
    We looked at the registry entries and we can see entries for the old SIA...
    Real question here is whether the ccm.config is accessed when one member of the cluster passed a report request to the other cluster member - would this be our issue?
    SERVICENAME_AUDIT="BOE120_AUDIT"                                SERVICENAME_AUDIT="BOE120_AUDIT"
    NAMESERVER="bo2"                                              | NAMESERVER="bo1"
    DBTYPE="MySQL"                                                  DBTYPE="MySQL"
    INSTALLTYPE="new"                                               INSTALLTYPE="new"
    REINIT="yes"                                                    REINIT="yes"
    BOBJEVERSION="12.0"                                             BOBJEVERSION="12.0"
    SHUTDOWNPORT="8005"                                             SHUTDOWNPORT="8005"
    REGFILE="/home/BOXI/bobje/data/.bobj"                           REGFILE="/home/BOXI/bobje/data/.bobj"
    DBTYPE_AUDIT="MySQL"                                            DBTYPE_AUDIT="MySQL"
    CLUSTER_NAMESERVER=""                                           CLUSTER_NAMESERVER=""
    CONNECTORPORT="8080"                                            CONNECTORPORT="8080"
    SIAPORTNUMBER="6410"                                            SIAPORTNUMBER="6410"
    BOBJELANG="en"                                                  BOBJELANG="en"
    BOBJELICENSEKEY="XXXX-xxxxxx-xxxxxxxxx-xxxx"                    BOBJELICENSEKEY="XXXX-xxxxxx-xxxxxxxxx-xxxx"
    MYSQLHOSTNAME="127.0.0.1"                                       MYSQLHOSTNAME="127.0.0.1"
    PRODUCTID_NAME="BusinessObjects"                                PRODUCTID_NAME="BusinessObjects"
    PRODUCTID_VER="12.1"                                            PRODUCTID_VER="12.1"
    LOCALNAMESERVER="bo2"                                         | LOCALNAMESERVER="bo1"
    PIDDIR="/home/BOXI/bobje/serverpids"                            PIDDIR="/home/BOXI/bobje/serverpids"
    CMSCLUSTER="no"                                                 CMSCLUSTER="no"
    REDIRECTPORT="8443"                                             REDIRECTPORT="8443"
    SIANODENAME="SIA2"                                            | SIANODENAME="SIA"
    DEFAULT_NAMESERVER="bo2"                                      | DEFAULT_NAMESERVER="bo1"
    INSTALL_DIR="/home/BOXI/bobje/"                                 INSTALL_DIR="/home/BOXI/bobje/"
    BOBJEUSERNAME="toronto1"                                        BOBJEUSERNAME="toronto1"
    CMSNAMESERVER="bo2"                                           | CMSNAMESERVER="bo1"
    DATABASEUID="toronto1"                                          DATABASEUID="toronto1"
    INSTALLMYSQL="yes"                                              INSTALLMYSQL="yes"
    BOBJEDIR="/home/BOXI/bobje/"                                    BOBJEDIR="/home/BOXI/bobje/"
    BOBJEINSTALLLOCAL="system"                                      BOBJEINSTALLLOCAL="system"
    SERVICENAME="BOE120"                                            SERVICENAME="BOE120"
    CMSPORTNUMBER="6400"                                            CMSPORTNUMBER="6400"
    CLUSTERPORTNUMBER="6400"                                        CLUSTERPORTNUMBER="6400"
    SERVICEPORT="3306"                                              SERVICEPORT="3306"
    SERVICEPORT_AUDIT="3306"                                        SERVICEPORT_AUDIT="3306"
    MYSQLHOSTNAME_AUDIT="127.0.0.1"                                 MYSQLHOSTNAME_AUDIT="127.0.0.1"
    SIAIILAUNCH='"/home/BOXI/bobje/enterprise120/generic/bobjrest | SIALAUNCH='"/home/BOXI/bobje/enterprise120/generic/bobjrestar
    </pre>
    Edited by: jemstar on Jun 25, 2009 12:42 PM

    <pre>The logs are attached below - might be a registry related issue??
    ceserver.cpp:968:virtual bool CDZServer::onInitialize(): TraceLog message 1
    2009/06/25 10:40:42.468|>>|E| |16511|1137466256| |||||||||||||||**ERROR:ceserver:invalid entry General\Directories\Config in registry [ceserver.cpp;968]
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 2
    2009/06/25 10:41:40.613|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 3
    2009/06/25 10:41:40.613|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 4
    2009/06/25 10:41:40.850|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 5
    2009/06/25 10:41:40.850|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 6
    2009/06/25 10:47:06.844|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 7
    2009/06/25 10:47:06.844|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 8
    2009/06/25 10:47:39.350|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 9
    2009/06/25 10:47:39.350|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 10
    2009/06/25 10:48:30.154|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 11
    2009/06/25 10:48:30.154|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 12
    2009/06/25 10:51:39.548|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 13
    2009/06/25 10:51:39.548|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 14
    2009/06/25 10:54:22.550|>>|E| |16511|1198218128| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 15
    2009/06/25 10:54:22.550|>>|E| |16511|1198218128| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 16
    2009/06/25 10:55:55.728|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 17
    2009/06/25 10:55:55.728|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 18
    2009/06/25 10:56:44.085|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 19
    2009/06/25 10:56:44.085|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 20
    2009/06/25 10:59:11.076|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 21
    2009/06/25 10:59:11.076|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 22
    2009/06/25 11:01:11.492|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 23
    2009/06/25 11:01:11.492|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 24
    2009/06/25 11:06:19.005|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 25
    2009/06/25 11:06:19.005|>>|E| |16511|1176263568| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 26
    2009/06/25 11:11:12.031|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 27
    2009/06/25 11:11:12.031|>>|E| |16511|1170385808| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    kc3xmlGenericParser.cpp:389:bool Cube::XmlTools::ValueTypedConstant::Validate(const Cube::XmlTools::ic3TokenTranslator*): TraceLog message 28
    2009/06/25 11:14:01.242|>>|E| |16511|1170385808| |||||||||||||||**ERROR:C3_GenericParser:ValueTypedConstant::Validate - Client - Invalid value : B95ED5004B624ADF927180432D8E2018 [kc3xmlGenericParser.cpp;389]
    kc3cdbdataprovider.cpp:3641:virtual BOResult cdbDataProvider::SetQuerySpec(const ibo_ptr<iboUnknown>&): TraceLog message 29
    2009/06/25 11:14:01.250|>>|E| |16511|1170385808| |||||||||||||||**ERROR:C3_Dataprovider:QuerySpec Validate failed ! [kc3cdbdataprovider.cpp;3641]
    kdgDocument.cpp:10587:void dgDocument::Check(bool, const char*, bool) const: TraceLog message 30
    2009/06/25 11:14:01.250|>>|E| |16511|1170385808| |||||||||||||||**ERROR:dgDocument:An internal error occured while dgDocument is calling pDataProvider->SetQuerySpec(pQuerySpec) [kdgDocument.cpp;10587]
    kdgDocumentEx.cpp:1589:virtual BOResult dgDocument::SetQueryMDP(const bo_wstring&, const ibo_ptr<iboUnknown>&, std::ostream&, std::ostream*): TraceLog message 31
    2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocumentEx:SetQueryMDP: 0.009
    kdgDocument.cpp:4342:BOResult dgDocument::SetQueryMDP(const dgCommandParser::DPCOMMAND&, std::ostream&): TraceLog message 32
    2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocument:SetQueryMDP: 0.009
    kdgDocument.cpp:4020:void dgDocument::UpdateQueryMDP(const dgCommandParser::DPCOMMAND&, std::ostream&): TraceLog message 33
    2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocument:UpdateQueryMDP: 0.009
    kdgDocument.cpp:1649:virtual BOResult dgDocument::ProcessDPCommands(std::istream&, bool, std::ostream&): TraceLog message 34
    2009/06/25 11:14:01.251|>=|E|X|16511|1170385808| |||||||||||||||Uncaught Exception in SilentScope: dgDocument:ProcessDPCommands: 0.01
    SystemHelpers.cpp:532:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 35
    2009/06/25 11:32:27.546|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:532: unable to resolve the USER_DOCUMENTS variable
    SystemHelpers.cpp:540:static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&): TraceLog message 36
    2009/06/25 11:32:27.547|>>|E| |16511|1199270800| |||||||||||||||in static bo_utf8string Helpers::Registry::expandUserDocumentDir(bo_utf8string&) at SystemHelpers.cpp:540: unable to resolve the USER_PROFILE_APP_DIR variable
    </pre>

  • RHEL4U4 EM64T Grid Control agent install issue

    I've installed a 2 node Oracle 10G R2 RAC on RHEL4 U4 EM64T and it is working fine on Dell PE2850 servers. But I couldn't get the grid control agent installed on these RHEL4U4 EM64T PE2850 servers. The OMS server is running 32 bit Oracle 10g R2 on RHEL4. The issue is with the OMA (agent) install on EM64T and I've tried several different options (local install and push from the OMS server). I end up with the following error. Any feedback is appreciated. Thanks.
    Raj
    <<installActions2006-12-07_11-22-39AM.log>>
    This is error we got from both the install on the local node and tried a push from the OMS server as well.
    INFO: Start output from spawned process:
    INFO: ----------------------------------
    INFO:
    INFO: /opt/oracle/product/10.2.0/agent10g/bin/genclntsh
    INFO: /usr/bin/ld: skipping incompatible /opt/oracle/product/10.2.0/agent10g/lib/libxml10.a when searching for -lxml10
    /usr/bin/ld: cannot find -lxml10
    INFO: collect2: ld returned 1 exit status
    INFO: genclntsh: Failed to link libclntsh.so.10.1
    INFO: make: *** [client_sharedlib] Error 1
    INFO: End output from spawned process.
    INFO: ----------------------------------
    INFO: Exception thrown from action: make
    Exception Name: MakefileException
    Exception String: Error in invoking target 'client_sharedlib' of makefile '/opt/oracle/product/10.2.0/agent10g/network/lib/ins_net_client.mk'. See '/opt/oracle/oraInventory/logs/installActions2006-12-07_11-22-39AM.log' for details.
    Exception Severity: 1

    Hi,
    Did you run cvu to check if all OS Patches are installed ??
    Best Regards,
    Paulo.

  • Agent Installation Issue

    Hi guys . While installing the agent on an asset Solaris system:
    root@system: /var/tmp/OC $ /opt/SUNWxvmoc/bin/agentadm configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
    agentadm: Version 12.1.2.2161 launched with args: configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
    Validating step : workarounds configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
    Validating step : db configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
    /var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
    Validating step : sc_console configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
    verified sc_console command is OK
    Validating step : setup_hmp configure -u root -p /var/tmp/OC/mypasswd
    Validating step : scn_agent configure
    scn_agent Common Agent Container environment is OK
    Validating step : setup_net configure
    skipping setup_net step for zone VC.
    Validating step : uce_agent configure
    Validating step : config_sysconfig configure
    Validating step : final configure
    End of validation
    executing step : workarounds
    workaround configuration done.
    executing step : db
    /var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
    configuring db
    INFO: hd_domain_vc_agent_db.sh decrypted the password.
    Java DB creation and initialization for Domain Model successful
    configuring jobs db
    INFO: hd_jobs_vc_agent_db.sh decrypted the password.
    Java DB creation and initialization for job manager successful
    INFO: db decrypted the password.
    executing step : sc_console
    verified sc_console command is OK
    Configuring sc_console
    *checking existing sc_console connections
    doing sc-console registration
    Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
    INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
    Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
    INFO: Retrying request
    Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
    INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
    Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
    INFO: Retrying request
    Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
    INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
    Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
    INFO: Retrying request
    CE: java.net.ConnectException: Connection timed out
    Code: 10
    ERROR: Connection refused.
    sc-console registration failed on [10].
    sc-console : Unknown error. *
    It does not seem to be connecting . What seems to be the issue here and how can I resolve it ?

    Hi,
    it looks like the network error I had in the past. Doe haave a firewall between Client and Proxy ?
    Is your client connected to more than one network ? If so it can be helpful to use the -a option.
    I would check firewall andd routing.
    Kind regards
    tunix2k

Maybe you are looking for

  • Difference between logical spool server and alternative printer

    Hi All, We are in the process of implementing load balancing among printers. As of now, they are printing as static printers. I want to know: 1) Is it necassary to define logical spool servers for printer load sharing or we by using printer load bala

  • PROBLEM IN JCHECKBOX FOCUS

    hi i don't get focus on checkbox.I need focus on the checkbox not on the text with it.what should i do?i sending my code please help me. public class SECOND extends javax.swing.JFrame { public SECOND() { initComponents(); setSize(500, 500); this.setD

  • Why methods equals() and hashCode() is defined in Object Class?

    Why methods equals() and hashCode() is defined in Object Class?

  • Need to use JMS in Web service for PUB/SUB pattern

    Hi All, I have JMS configured in my Web logic server 10.3.4. I have stand alone program for JMS in PUB/SUB pattern. I have Web service application with Apache CXF framework. Now, the problem I need to integrate JMS in my web service application for n

  • Viber Desktop for MAC - Exporting chat history

    For some reason when I upgraded to the new Viber earlier this month on my iPhone, all of my call and chat history vanished from my phone and I didn't have a chance to export it. The chat history that got deleted on my iPhone is still visible on my Ma