Agent configuration issue

I have created TAR file for agent installation and now after installation, it's configured. But not able to secure and not able to start or shutdown agent.
pload: retStatus=-1
2007-10-02 13:44:43 Thread-1749 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
2007-10-02 13:45:06 Thread-1750 ERROR ssl: nzos_Handshake failed, ret=29024
2007-10-02 13:45:06 Thread-1750 ERROR http: 6: Unable to initialize ssl connection with server, aborting connection attempt
2007-10-02 13:45:06 Thread-1750 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://wff999999ssc605.stipn.com:1159/em/upload: retStatus=-1
2007-10-02 13:45:06 Thread-1750 ERROR ssl: nzos_Handshake failed, ret=29024
2007-10-02 13:45:06 Thread-1750 ERROR http: 6: Unable to initialize ssl connection with server, aborting connection attempt
2007-10-02 13:45:06 Thread-1750 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://wff999999ssc605.stipn.com:1159/em/upload: retStatus=-1
During Securing
emctl secure agent
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Enter Agent Registration password :
Requesting an HTTPS Upload URL from the OMS...java.io.FileNotFoundException: /opt/oracle/10.2/ldizd5319.xxxx.com_w425sd1/sysman/config/emd.properties (A file or directory in the path name does not exist.)
Done.
Requesting an Oracle Wallet and Agent Key from the OMS...caught Exceptionjava.io.FileNotFoundException: /opt/oracle/10.2/ldizd5319.xxxx.com_w425sd1/sysman/config/emd.properties (A file or directory in the path name does not exist.)
Failed.
Failed to contact the OMS at the HTTP URL set in /opt/oracle/10.2/ldizd5319.xxxx.com_w425sd1/sysman/config/emd.properties
The Agent has not been secured.
I dont know why it's pointing to diffrent location instead of /opt/oracle/10.2/sysman/config ...?

did you reconfigure the agent?
One easy fix would be to copy the folder from sysmanxxxx to the one it's looking for..

Similar Messages

Agent Configuration Assistant fails on installation

Trying to install 9iR2 on Red Hat Linux 7.3. I've got a test server working but the production one refuses to run the Agent Configuration Assistant. It just says
--<snip>--
Parameter "orahome" = /opt/oracle/product/9.2.0
Parameter /nodeinfo" = NO_VALUE
Agent Service Failed
--</snip>--
Is it vital for me to have it running? To what do I need it exactly?
Here's some details on issue, if someone could be able to help me out...
--<snip>--
Command which is being spawned is /opt/oracle/product/9.2.0/JRE/bin/jre -classpath
/opt/oracle/product/9.2.0/JRE/lib/rt.jar:/opt/oracle/product/9.2.0/jlib/srvm.jar:/opt/oracle/product/9.2.0/network/agent/agentca.jar
oracle.agent.AgentCA /orahome /opt/oracle/product/9.2.0 /nodeinfo
NO_VALUE
Configuration tool Agent Configuration Assistant was canceled
Result code for launching of configuration tool is -1
--</snip>--
I read some agent related documentation:
http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/em.920/a96676/toc.htm
I checked if the agent was running on the test server and if not, would
it start:
--<snip>--
[root@delfoi log]# agentctl status
DBSNMP for Linux: Version 9.2.0.1.0 - Production on 01-AUG-2002 16:15:09
Copyright (c) 2002 Oracle Corporation. All rights reserved.
Could not contact agent. It may not be running.
[root@delfoi log]# agentctl start
DBSNMP for Linux: Version 9.2.0.1.0 - Production on 01-AUG-2002 16:15:18
Copyright (c) 2002 Oracle Corporation. All rights reserved.
Starting Oracle Intelligent Agent......
Agent started
--/snip>--
Tried the same on our production server:
--<snip>--
[root@chfiv103 root]# agentctl status
DBSNMP for Linux: Version 9.2.0.1.0 - Production on 01-AUG-2002 17:03:21
Copyright (c) 2002 Oracle Corporation. All rights reserved.
Could not contact agent. It may not be running.
[root@chfiv103 root]# agentctl start
DBSNMP for Linux: Version 9.2.0.1.0 - Production on 01-AUG-2002 17:03:29
Copyright (c) 2002 Oracle Corporation. All rights reserved.
Starting Oracle Intelligent Agent...\nAgent startup failed. Check
/opt/oracle/product/9.2.0/network/log/dbsnmp.nohup for details
--</snip>--
And the logs say:
--</snip>--
[root@chfiv103 root]# more
/opt/oracle/product/9.2.0/network/log/dbsnmp.nohup
------------------------ Thu Aug 1 17:03:29 EEST 2002
Certain conflicts were resolved during discovery
Please consult /opt/oracle/product/9.2.0/network/log/nmiconf.log for details
Failed while initializing SNMP
Error initializing subsystems
Agent exited at Thu Aug 1 17:03:30 EEST 2002 with return value 55
Could not start agent. Initialization failure
[root@chfiv103 root]# more
/opt/oracle/product/9.2.0/network/log/nmiconf.log
DBSNMP for Linux 2.4.18-5: release 9.2.0.0.0 - Production on 01-AUG-02
17:03:29
Discovering services on chfiv103 configured on host addresses {chfiv103
80.81.172.177}
Using oratab file /etc/oratab
Warning : Error while sourcing third party discovery file
emddiscover.tcl
: can't read "tabfile": no such variable
--</snip>--
Couldn't find any strangeness in the config files either:
/opt/oracle/product/9.2.0/network/admin/snmp_ro.ora
/opt/oracle/product/9.2.0/network/admin/snmp_rw.ora
/opt/oracle/product/9.2.0/network/admin/listener.ora
/opt/oracle/product/9.2.0/network/admin/tnsnames.ora
I'm a bit loss here...
Regards,
Peter

You can to verify if you have a problem with the firewall. Run the next comands
Execute CMD and run
telnet hostname XXXX ------------> where XXXX is the AGENT PORT . This port its configure in the emd.properties file. This file is in the AGENT_DIRECTORY\sysman\config\
If you dont execute a telnet to this port, you have a firewall problem
Regards

Oracle 10.2.0.5 agent configuration failed.

OS : Solaris sparc 10.
Agent version: 10.2.0.5
Oracle agent configuration failed with "Could not reserve enough space for object heap" error message.
emagent.trc file shows following text.
----- Tue Apr 21 16:16:41 2009::Property 'agentTZRegion' is missing from /app/oracle/grid/10.2.0/agent10g/sysman/config/emd.properties. This is normal when the agent is started for the very first time.Updating it...
----- Tue Apr 21 16:16:41 2009::/app/oracle/grid/10.2.0/agent10g/sysman/config/emd.properties copied to /app/oracle/grid/10.2.0/agent10g/sysman/config/emd.properties.2009-04-21-16-16-41 while updating the property 'agentTZRegion'
----- Tue Apr 21 16:16:41 2009::Error occurred during initialization of VM
----- Tue Apr 21 16:16:41 2009::Could not reserve enough space for object heap
----- Tue Apr 21 16:16:41 2009::Failed to update the property 'agentTZRegion' in /app/oracle/grid/10.2.0/agent10g/sysman/config/emd.properties.Needs to be manually updated.Execute 'emctl config agent getTZ' to see if this value is appropriate.
P.S. : I am able to configure 10.2.0.4 on the same box without any issue.
any idea????
Test of available contoguis memory for java...
$ java -Xmx2048m -version
java version "1.5.0_16"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_16-b02)
Java HotSpot(TM) Server VM (build 1.5.0_16-b02, mixed mode)
Edited by: nclrjt on Apr 21, 2009 4:58 PM

Looks like I found cause. There is change in parameter value for jre in oraparam.ini file of 10.2.0.5 agent software.
I have changed "JRE_MEMORY_OPTIONS=" -mx350m" to ” JRE_MEMORY_OPTIONS=" -mx150m". Configuration and one-off patches are applied consecutively to agent installation.
This was problem where local zone memory were capped to lower resoure in solaris projects.

Agent configuration fails

I have been trying to install agent10g to my OEM grid on AIX 5.3. OUI installation finished without errors and all semms to be correct but ... it is impossible to even check a status of agent.
Every command emctl <whatever> agent returns the same output.
EM Configuration issue. /oracle/product/10.2.0/db/devel_EMREP not found.
where /oracle/product/10.2.0/db is my databases $ORACLE_HOME
 EMREP is a OEM GRID database
 devel hostname where all these staffs are located
is it correct it searches for files in database $ORACLE_HOME instead of agent$ORACLE_HOME?
Anyway I tried to configure agent using agentca -f - it finishes without any errors - just a few warnings like :
OPatch Session completed with warnings.
but emctl.log file and it returns errors
+132070 :: Thu Aug 27 13:57:55 2009::AgentLifeCycle.pm: Processing stop agent+
+132070 :: Thu Aug 27 13:57:56 2009::AgentStatus.pm:emdctl status agent returned 3+
+132070 :: Thu Aug 27 13:57:56 2009::AgentLifeCycle.pm:istatusCEMD returned 3+
+132070 :: Thu Aug 27 13:57:57 2009::AgentLifeCycle.pm:emdctl stop agent returned 4+
+132070 :: Thu Aug 27 13:57:58 2009::AgentStatus.pm:emdctl status agent returned 1+
+132070 :: Thu Aug 27 13:57:58 2009::AgentLifeCycle.pm:exited loop with 1+
+582410 :: Thu Aug 27 13:59:01 2009::AgentLifeCycle.pm: Processing secure agent+
+582410 :: Thu Aug 27 13:59:01 2009::AgentStatus.pm:Processing secure agent+
+582410 :: Thu Aug 27 13:59:31 2009::AgentStatus.pm:emdctl gensudoprops returned 0+
+577976 :: Thu Aug 27 14:00:22 2009::AgentLifeCycle.pm: Processing start agent+
+577976 :: Thu Aug 27 14:00:22 2009::AgentLifeCycle.pm: EMHOME is /oracle/product/agent10g+
+577976 :: Thu Aug 27 14:00:22 2009::AgentLifeCycle.pm: service name is+
+577976 :: Thu Aug 27 14:00:23 2009::AgentLifeCycle.pm:status agent returned with retCode=1+
+577976 :: Thu Aug 27 14:00:35 2009::AgentLifeCycle.pm: Exited loop with retCode=3+
+1725766 :: Thu Aug 27 14:00:37 2009::AgentStatus.pm:emdctl gensudoprops returned 0+
any advices how to proceed in my case ?

omg - you are absolutely right! I did a mistake in my agent's .profile file. OK - now it uses corrent emctl. :)
But ...still it is not ok. emctl status agent shows correct output but in OEM most of targets has status "Metric collection error".
I know it is difficult to guess what is wrong with my configuration so maybe could you recommend me any articles, webpages where I can read from scratch about agent and OMS services. I do not want to just configure it. I want to know general concept and all rules how it works as well as all usefull tools and configuration files.
of course all other suggestion regarding my issue are welcome :)
KP>

EM Configuration issue.

I have installed grid agent on different server. When i ran emctl status agent i am getting below error.
EM Configuration issue. /u01/app/oracle/product/10g/hostname.com_ORCL.
OS is AIX
Thanks in advance...

I am in AGENT_HOME.You are under Agent installation that's one thing. You also need to make sure your environment variable ORACLE_HOME point to AGENT_HOME not the database installation.

Management Configuration Service failed to process agent configuration request

We're having a SCOM environment with several Management Servers. Since about two days, we're receiving the following alerts in SCOM and Management Server State is Critical:
Name : Management Configuration Service failed to process agent configuration request
Description : Management Configuration Service failed to process agent configuration request.
OpsMgr Management Configuration Service failed to process configuration request
(Xml configuration file or management pack request) due to the following exception
Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.DataAccessEx
ception: Data access operation failed
at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.DataAc
cessOperation.ExecuteSynchronously(Int32 timeoutSeconds, WaitHandle stopWaitHandle)
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.
ConfigurationStore.ExecuteOperationSynchronously(IDataAccessConnectedOperation
operation, String operationName)
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.
ConfigurationStore.GetConfiguration(IDictionary`2 agentList,
ConfigurationSignature configurationSignature)
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.AgentRequestPro
cessor.ProcessConfigurationRequest(ICollection`1 requestList, Int32&
processedRequestsCount)
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.AgentRequestPro
cessor.Execute()
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.ThreadManager.R
esponseThreadStart(Object state)
System.Data.SqlClient.SqlException (0x80131904): Timeout expired. The timeout
period elapsed prior to completion of the operation or the server is not
responding. ---> System.ComponentModel.Win32Exception (0x80004005): The wait
operation timed out
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean
breakConnection, Action`1 wrapCloseInAction)
at
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand
cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryReadInternal(Boolean setTimeout,
Boolean& more)
at System.Data.SqlClient.SqlDataReader.Read()
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.
AgentConfigGetOperation.ReadAgentPoolInfo(IDataReader reader,
AgentConfigurationBuilder builder)
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.
AgentConfigGetOperation.ReadData(SqlDataReader reader)
at Microsoft.EnterpriseManagement.ManagementConfiguration.DataAccessLayer.Reader
SqlCommandOperation.SqlCommandCompleted(IAsyncResult asyncResult)
ClientConnectionId:e44a346e-adb8-4679-9b0d-b515ac24df95
As of that I'm pretty sure that it's related to a SQL Issue. I think it's related to SQL performance, as the server is available and can be reached:
System.Data.SqlClient.SqlException (0x80131904): Timeout expired. The timeout elapsed prior to completion of the operation or the server is not . ---> System.ComponentModel.Win32Exception (0x80004005): The wait timed out
at ....
Related to the error I also see warning related to "Local Dirty Notification State" and "Delta Synchronization State"
Thanks for any help

Hi,
You may need to check whether your SQL server which hold SCOM database has any performance issue. You can restart related SQL services and system center management configuration service. In addition, please check operation manager event logs on management
server and find out is there any error messages related.
If there is event 31552, then you can try links below to troubleshoot it:
http://blogs.technet.com/b/sudheesn/archive/2009/07/28/getting-31552-exception-sqlexception-timeout-expired-very-frequently-in-scom-server.aspx
http://blogs.technet.com/b/kevinholman/archive/2010/08/30/the-31552-event-or-why-is-my-data-warehouse-server-consuming-so-much-cpu.aspx
In addition, please also try to flush health service state and caches for management server.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Lync 2013 to Exchange 2013 Oauth problem - Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer

Hi,
I am having a problem getting OAuth to work from Exchange 2013 to Lync 2013.
I have read and following the instructions online and cannot see what I am doing wrong.
On the Exchange 2013 server, I get the following error when I run:
Test-OAuthConnectivity -Service EWS -TargetUri
https://exchserver2.domainname.local/ews/ -Mailbox "Jack"
RunspaceId : 920118a3-6ab2-45dc-9b68-de68133de95e
Task : Checking EWS API Call Under Oauth
Detail : The configuration was last successfully loaded at 01/01/0001 00:00:00 UTC. This was 1059263714 minutes
ago.
The token cache is being cleared because "use cached token" was set to false.
Exchange Outbound Oauth Log:
Client request ID: 19ad80f6-7751-429f-aac5-e802105fbbc6
Information:[OAuthCredentials:Authenticate] entering
Information:[OAuthCredentials:Authenticate] challenge from
'https://exchserver2.domainname.local/ews/Exchange.asmx' received: Bearer
client_id="00000002-0000-0ff1-ce00-000000000000",
trusted_issuers="[email protected]",Negotiate,NTLM
Information:[OAuthCredentials:GetToken] client-id: '00000002-0000-0ff1-ce00-000000000000', realm: '',
trusted_issuer: '[email protected]'
Information:[OAuthCredentials:GetToken] start building a token for the user domain 'domainname.co.uk'
Information:[OAuthTokenBuilder:GetAppToken] start building the apptoken
Information:[OAuthTokenBuilder:GetAppToken] checking enabled auth servers
Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer
was in the trusted_issuer list, realm from challenge was also empty. trust_issuers was
[email protected]
Error:The trusted issuers contained the following entries
'[email protected]'. None of them are configured locally.
Exchange Response Details:
HTTP response message:
Exception:
System.Net.WebException: The request was aborted: The request was canceled. --->
Microsoft.Exchange.Security.OAuth.OAuthTokenRequestFailedException: The trusted issuers contained the
following entries '[email protected]'. None of them are
configured locally.
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppToken(String applicationId, String
destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain)
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppWithUserToken(String applicationId,
String destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain, ClaimProvider claimProvider)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.GetToken(WebRequest webRequest,
HttpAuthenticationChallenge challengeObject)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.Authenticate(String challengeString, WebRequest
webRequest, Boolean preAuthenticate)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.OAuthAuthenticationModule.Authenticate(String
challenge, WebRequest request, ICredentials credentials)
at System.Net.AuthenticationManager.Authenticate(String challenge, WebRequest request, ICredentials
credentials)
at System.Net.AuthenticationState.AttemptAuthenticate(HttpWebRequest httpWebRequest, ICredentials
authInfo)
at System.Net.HttpWebRequest.CheckResubmitForAuth()
at System.Net.HttpWebRequest.CheckResubmit(Exception& e, Boolean& disableUpload)
at System.Net.HttpWebRequest.DoSubmitRequestProcessing(Exception& exception)
at System.Net.HttpWebRequest.ProcessResponse()
at System.Net.HttpWebRequest.SetResponse(CoreResponseData coreResponseData)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Monitoring.TestOAuthConnectivityHelper.SendExchangeOAuthRequest(ADUser user,
String orgDomain, Uri targetUri, String& diagnosticMessage, Boolean appOnly, Boolean useCachedToken,
Boolean reloadConfig)
ResultType : Error
Identity : Microsoft.Exchange.Security.OAuth.ValidationResultNodeId
IsValid : True
ObjectState : New
It appears to work fine from Lync 2013 to Exchange 2013.
When I run: Test-CsExStorageConnectivity -sipuri [email protected] -Binding Nettcp -Verbose in Lync 2013 I get a successful outcome:
VERBOSE: Successfully opened a connection to storage service at localhost using
binding: NetNamedPipe.
VERBOSE: Create message.
VERBOSE: Execute Exchange Storage Command.
VERBOSE: Processing web storage response for ExCreateItem Success.,
result=Success, activityId=0bbdc565-4a05-4b57-bf95-0c75488a1ef6, reason=.
VERBOSE: Activity tracing:
2015/01/02 19:15:55.616 Autodiscover, send GetUserSettings request,
[email protected], Autodiscover
Uri=https://exchserver2.domainname.local/autodiscover/autodiscover.svc, Web
Proxy=<NULL>
2015/01/02 19:15:55.616 Autodiscover.EWSMA trace,
type=AutodiscoverRequestHttpHeaders, message=<Trace
Tag="AutodiscoverRequestHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
POST /autodiscover/autodiscover.svc HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.004
</Trace>
2015/01/02 19:15:55.624 Autodiscover.EWSMA trace, type=AutodiscoverRequest,
message=<Trace Tag="AutodiscoverRequest" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:wsa="http://www.w3.org/2005/08/addressing"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<a:RequestedServerVersion>Exchange2013</a:RequestedServerVersion>
<wsa:Action>http://schemas.microsoft.com/exchange/2010/Autodiscover/Autodiscove
r/GetUserSettings</wsa:Action>
<wsa:To>https://exchserver2.domainname.local/autodiscover/autodiscover.svc</
wsa:To>
</soap:Header>
<soap:Body>
<a:GetUserSettingsRequestMessage
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<a:Request>
<a:Users>
<a:User>
<a:Mailbox>[email protected]</a:Mailbox>
</a:User>
</a:Users>
<a:RequestedSettings>
<a:Setting>InternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsVersion</a:Setting>
</a:RequestedSettings>
</a:Request>
</a:GetUserSettingsRequestMessage>
</soap:Body>
</soap:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace,
type=AutodiscoverResponseHttpHeaders, message=<Trace
Tag="AutodiscoverResponseHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
HTTP/1.1 200 OK
Transfer-Encoding: chunked
request-id: 5917d246-64b0-48e2-ad79-f9b6cffb5bea
X-CalculatedBETarget: exchserver2.domainname.local
X-DiagInfo: EXCHSERVER2
X-BEServer: EXCHSERVER2
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Set-Cookie: ClientId=FTFXWUQWWRJVBMNBG; expires=Sat, 02-Jan-2016 19:15:55 GMT;
path=/;
HttpOnly,X-BackEndCookie=actas1(sid:S-1-5-21-3691024758-535552880-811174816-113
5|smtp:[email protected]|upn:[email protected])=u56Lnp2ejJqBx8jIn
sqbxpvSz8rHx9LLzp7O0sbOzcnSzcqcmZqem8aempmcgYHNz87K0s/N0s/Oq87Gxc7KxcrK;
expires=Sun, 01-Feb-2015 19:15:55 GMT; path=/autodiscover; secure; HttpOnly
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
X-FEServer: EXCHSERVER2
Date: Fri, 02 Jan 2015 19:15:55 GMT
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace, type=AutodiscoverResponse,
message=<Trace Tag="AutodiscoverResponse" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:a="http://www.w3.org/2005/08/addressing">
<s:Header>
<a:Action
s:mustUnderstand="1">http://schemas.microsoft.com/exchange/2010/Autodiscover/Au
todiscover/GetUserSettingsResponse</a:Action>
<h:ServerVersionInfo
xmlns:h="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<h:MajorVersion>15</h:MajorVersion>
<h:MinorVersion>0</h:MinorVersion>
<h:MajorBuildNumber>1044</h:MajorBuildNumber>
<h:MinorBuildNumber>21</h:MinorBuildNumber>
<h:Version>Exchange2013_SP1</h:Version>
</h:ServerVersionInfo>
</s:Header>
<s:Body>
<GetUserSettingsResponseMessage
xmlns="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<Response xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ErrorCode>NoError</ErrorCode>
<ErrorMessage />
<UserResponses>
<UserResponse>
<ErrorCode>NoError</ErrorCode>
<ErrorMessage>No error.</ErrorMessage>
<RedirectTarget i:nil="true" />
<UserSettingErrors />
<UserSettings>
<UserSetting i:type="StringSetting">
<Name>InternalEwsUrl</Name>
<Value>https://exchserver2.domainname.local/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsUrl</Name>
<Value>https://exchserver2.domainname.co.uk/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsVersion</Name>
<Value>15.00.1044.000</Value>
</UserSetting>
</UserSettings>
</UserResponse>
</UserResponses>
</Response>
</GetUserSettingsResponseMessage>
</s:Body>
</s:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover, received GetUserSettings response,
duration Ms=88, response=NoError
2015/01/02 19:15:55.706 Lookup user details,
sipUri=sip:[email protected], [email protected],
sid=S-1-5-21-3691024758-535552880-811174816-1135, [email protected],
tenantId=00000000-0000-0000-0000-000000000000
VERBOSE: Items choice type: CreateItemResponseMessage.
VERBOSE: Response message, class: Success, code: NoError.
VERBOSE: Item: Microsoft.Rtc.Internal.Storage.Exchange.Ews.MessageType, Id:
AAMkADAwNWZkZWI0LWM5NGYtNDUxNy05Nzk3LWZhZjRiY2Y4MTU4NwBGAAAAAADLP1MgTEXdQ7zQSlb
qPl++BwBauhRZTfLbTYZ+hBWtK784ANcdmUYqAACSqIurRqgYSZwMhT/IBw89AACnT6G9AAA=,
change key: CQAAABYAAACSqIurRqgYSZwMhT/IBw89AACnip6b, subject: , body: .
VERBOSE: Is command successful: True.
Test passed.
All my certificates on the Exchange 2013 and Lync 2013 servers are from my local CA.
I use APP with the public certificates as my reverse proxy for people connecting from outside the network.
In Lync, the OAuthTokenIssuer certificate created through the Lync deployment wizard is issued to domainname.local (my primary sip domain) and the Subject Alternative names include domainname.co.uk
I then exported this certificate to the Exchange Server and use the Set-AuthConfig to use this certificate for OAuth.
from what I read this was what I was supposed to do.
is this correct?
I have tried so many things I don't know what do to next.
Should the OAuth certificate in exchange be the one exported from Lync?
In Lync, should the OAuthTokenIssuer certificate include the servername or lyncserver.domainname.local or just be domainname.local like it is at the moment?
thank-you
jack

Thomas,
thanks for giving this the time. I have run the Configure-EnterpriseApplication.ps1 script following by remove-PartnerApplication so many times that I was wondering if there are other setting that
Configure-EnterpriseApplication.ps1 creates that aer not removed when you run
remove-PartnerApplication.
is there a way to completely remove everything that is confirmed when you run
Configure-EnterpriseApplication.ps1 so I can run Configure-EnterpriseApplication.ps1 without there being any configurations left from when I previously run that command?
thanks
jack
[PS] C:\Windows\system32>Get-PartnerApplication |fl
RunspaceId : cb2fb328-769d-4b32-8b7b-1fa35e2994f5
Enabled : True
ApplicationIdentifier : 00000004-0000-0ff1-ce00-000000000000
CertificateStrings : {MIIGcDCCBVigAwIBAgITPgAAARIHL+ig32UAAQAAAAABEjANBgkqhkiG9w0BAQUFADBcMRUwEwYKCZIm
iZPyLGQBGRYFbG9jYWwxHTAbBgoJkiaJk/IsZAEZFg1HdWlkZUNsb3RoaW5nMSQwIgYDVQQDExtHdWlkZ
UNsb3RoaW5nLUFQUFNFUlZFUjEtQ0EwHhcNMTUwMTEwMTIxODIzWhcNMTcwMTA5MTIxODIzWjB7MQswCQ
YDVQQGEwJHQjEPMA0GA1UECBMGTG9uZG9uMQ8wDQYDVQQHEwZMb25kb24xHzAdBgNVBAoTFkd1aWRlIEN
sb3RoaW5nIExpbWl0ZWQxCzAJBgNVBAsTAkhRMRwwGgYDVQQDExNHdWlkZUNsb3RoaW5nLmNvLnVrMIIB
IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyzDzaLsjJfktsbwIJ998ihsZM/0rKGdIt8rIx00oc
HA7w0uVyz2UqnP9a8uRi6HkA7djbynlmGG0hKSUUQngXxz7q2dY6q9rcY5Rw2mJOMeppounx44FFp4+4e
5HQKviLTYo+3DBGIR0mYDqxanKPS00d0f7HDLvmVb90hjdrbE372JBdcNNHs2OHRqg37bN2fAbwd22c9x
2kvi0rESFnr+KcIGECVInCTHLJ7fwVqvi4hvRqtz7KLZsMXprpgeVDs45EMMRtwJ5Hw8uZR4CFz4dHSlo
dIVgDPn8Ns2vGhcUK0JU4WkDbjnqo1SJzHlqtNjiu//wGcn77PAiM0yhyQIDAQABo4IDCjCCAwYwCwYDV
R0PBAQDAgWgMCEGCSsGAQQBgjcUAgQUHhIAVwBlAGIAUwBlAHIAdgBlAHIwEwYDVR0lBAwwCgYIKwYBBQ
UHAwEwHQYDVR0OBBYEFOY3whPicRAXNsTDSIg3FexpaCKdMHUGA1UdEQRuMGyCH0x5bmNTZXJ2ZXIyLkd
1aWRlQ2xvdGhpbmcuY28udWuCH0x5bmNTZXJ2ZXIyLkd1aWRlQ2xvdGhpbmcubG9jYWyCE0d1aWRlQ2xv
dGhpbmcuY28udWuCE0d1aWRlQ2xvdGhpbmcubG9jYWwwHwYDVR0jBBgwFoAUDHst3gUSMGwvkiNTPavmi
UEWgtQwggEuBgNVHR8EggElMIIBITCCAR2gggEZoIIBFYaBzWxkYXA6Ly8vQ049R3VpZGVDbG90aGluZy
1BUFBTRVJWRVIxLUNBLENOPURvbVNlcnZlcjIsQ049Q0RQLENOPVB1YmxpYyUyMEtleSUyMFNlcnZpY2V
zLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9R3VpZGVDbG90aGluZyxEQz1sb2NhbD9jZXJ0
aWZpY2F0ZVJldm9jYXRpb25MaXN0P2Jhc2U/b2JqZWN0Q2xhc3M9Y1JMRGlzdHJpYnV0aW9uUG9pbnSGQ
2h0dHA6Ly9jcmwuZ3VpZGVjbG90aGluZy5sb2NhbC9jcmxkL0d1aWRlQ2xvdGhpbmctQVBQU0VSVkVSMS
1DQS5jcmwwgdUGCCsGAQUFBwEBBIHIMIHFMIHCBggrBgEFBQcwAoaBtWxkYXA6Ly8vQ049R3VpZGVDbG9
0aGluZy1BUFBTRVJWRVIxLUNBLENOPUFJQSxDTj1QdWJsaWMlMjBLZXklMjBTZXJ2aWNlcyxDTj1TZXJ2
aWNlcyxDTj1Db25maWd1cmF0aW9uLERDPUd1aWRlQ2xvdGhpbmcsREM9bG9jYWw/Y0FDZXJ0aWZpY2F0Z
T9iYXNlP29iamVjdENsYXNzPWNlcnRpZmljYXRpb25BdXRob3JpdHkwDQYJKoZIhvcNAQEFBQADggEBAD
87GUPi02czEMO2Op0CeKBBpGwsfjYR9+RlC2uKAoH8PbWAxYNP3Ke6BtPeFy+95GGAJd5Z0+6LpO/AagA
+zeY/tocZQjy0pYaU4/TPZgD+ZB/8sU982msu+8waO316ipBcf/87n9ZW3Jjk5DcVbtwrZErrGRe9DEn8
QArN0jroLfaRtbDumse1Lp76+dxFuVhlLWcUXtIKaxm+UU9DS94EwJMtN54lDm3EG6hVdiGUR7TYqZU0K
HGm7HciIhuO+2rhAazOBiIAAW6wZRUpFKZONSVD6bKrQCzL12LvynQ7XC6Itgr4JGzNCmoN43dXwVCkWo
amTDdZY4h+QBqUvvY=}
AuthMetadataUrl : https://lyncserver2.domainname.local/metadata/json/1
Realm : domainname.local
UseAuthServer : False
AcceptSecurityIdentifierInformation : True
LinkedAccount : domainname.local/Users/LyncEnterprise-ApplicationAccount
IssuerIdentifier :
AppOnlyPermissions :
ActAsPermissions :
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
DistinguishedName : CN=LyncEnterprise-786f61476b634278a3c9b9e4ec08b660,CN=Partner
Applications,CN=Auth Configuration,CN=domainname,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domainname,DC=local
Identity : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
Guid : 07495125-ccd4-4443-82d9-74fc3b955cdf
ObjectCategory : domainname.local/Configuration/Schema/ms-Exch-Auth-Partner-Application
ObjectClass : {top, msExchAuthPartnerApplication}
WhenChanged : 10/01/2015 17:14:55
WhenCreated : 10/01/2015 17:14:55
WhenChangedUTC : 10/01/2015 17:14:55
WhenCreatedUTC : 10/01/2015 17:14:55
OrganizationId :
Id : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
OriginatingServer : DomServer2.domainname.local
IsValid : True
ObjectState : Unchanged

"Agent Configuration Assistant Failed" during oracle 9i installation on xp

Hi All,
I tried to install Oracle 9i on windows XP. Except the the agent, everything else is successfully installed.Can somebody guide me in fixing the below problem?
Parameter "orahome" = D:\oracle\ora92
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
Any help in this issue is greatly appreciated.
Sowjanya.A

Lets start with the basics. There is no such thing as Oracle 9i.
Yes I know Oracle years ago used it as a marketing label but to help you we need the exact version to 3 decimal places.
Either way the version you are just now installing is so old it will be unsupported? Why are you installing Neolithic software?
And finally ... What agent? What agent configuration? What does an agent have to do with a 9i installation on XP?
The more specific you are, and the clearer your description, the more likely you will get help. Though why you are installing something so old escapes me at the moment. <g>

Agent Configuration Assistant hangs

Hello All,
I am installing the OEM agent (10.2.0.1) on an AIX 5.3 server. After I run the root.sh, it starts to run the Agent Configuration Assistant. At this point it just hangs for hours.
I have installed other 10.2.0.1 agents on other AIX 5.3 servers with no issues and the it completes relatively quickly.
Any ideas as to how to resolve this installation/configuration hang?
Thanks,
Reid

Checking installer requirements...
Checking operating system version: must be 5200 or 5300
Passed
Checking swap space: must be greater than 150 MB. Actual 10240 MB Passed
Checking Temp space: must be greater than 1300 MB. Actual 4324 MB Passed
All installer requirements met.
The commandline for unzip:
/mnt/ora10gr2GRID/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.
0/1/DataFiles/\*.jar -d /tmp/OraInstall2006-11-02_08-27-11AM
The commandline for unzip:
/mnt/ora10gr2GRID/install/unzip -qqq ../stage/Components/oracle.swd.oui/10.2.0.1
.0/1/DataFiles/\*.jar -d /tmp/OraInstall2006-11-02_08-27-11AM
The commandline for unzip:
/mnt/ora10gr2GRID/install/unzip -qqq ../stage/Components/oracle.swd.oui.core/10.
2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2006-11-02_08-27-11AM
The number of files bootstrapped for the jre is 228.
The number of files bootstrapped for the oui is 96.
Execvp of the child jre : the cmdline is /tmp/OraInstall2006-11-02_08-27-11AM/jr
e/1.4.2/bin/java, and the argv is
/tmp/OraInstall2006-11-02_08-27-11AM/jre/1.4.2/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2006-11-02_08-27-11AM/oui/lib/aix
-Doracle.installer.oui_loc=/tmp/OraInstall2006-11-02_08-27-11AM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/mnt/ora10gr2GRID/install
-Doracle.installer.jre_loc=/tmp/OraInstall2006-11-02_08-27-11AM/jre/1.4.2
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=
-Doracle.installer.unixVersion=3
-Djava.net.preferIPv4Stack=true
-mx150m
-cp
/tmp/OraInstall2006-11-02_08-27-11AM:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jl
ib/OraInstaller.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/oneclick.jar:/
tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2006
-11-02_08-27-11AM/oui/jlib/srvm.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jli
b/share.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/OraInstallerNet.jar:/t
mp/OraInstall2006-11-02_08-27-11AM/oui/jlib/xml.jar:/tmp/OraInstall2006-11-02_08
-27-11AM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui
/jlib/orai18n-mapping.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/emCfg.ja
r:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/ojmisc.jar:/tmp/OraInstall2006-1
1-02_08-27-11AM/oui/jlib/InstImages.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui
/jlib/InstHelp.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/InstHelp_de.jar
:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall20
06-11-02_08-27-11AM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2006-11-02_08-27-11A
M/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/InstHel
p_ja.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/InstHelp_ko.jar:/tmp/OraI
nstall2006-11-02_08-27-11AM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2006-11-0
2_08-27-11AM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ou
i/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/oracle_i
ce.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/help4.jar:/tmp/OraInstall20
06-11-02_08-27-11AM/oui/jlib/help4-nls.jar:/tmp/OraInstall2006-11-02_08-27-11AM/
oui/jlib/ewt3.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/ewt3-swingaccess
.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2
006-11-02_08-27-11AM/oui/jlib/swingaccess.jar:/tmp/OraInstall2006-11-02_08-27-11
AM/oui/jlib/classes12.jar::/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/OraPrer
eq.jar:/tmp/OraInstall2006-11-02_08-27-11AM/oui/jlib/jewt4.jar:/tmp/OraInstall20
06-11-02_08-27-11AM/oui/jlib/jewt4-nls.jar:/tmp/OraInstall2006-11-02_08-27-11AM/
ext/jlib/em_1click_help.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1cl
ick_help_de.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1click_help_es.
jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1click_help_fr.jar:/tmp/Ora
Install2006-11-02_08-27-11AM/ext/jlib/em_1click_help_it.jar:/tmp/OraInstall2006-
11-02_08-27-11AM/ext/jlib/em_1click_help_ja.jar:/tmp/OraInstall2006-11-02_08-27-
11AM/ext/jlib/em_1click_help_ko.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jli
b/em_1click_help_pt_BR.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1cli
ck_help_zh_CN.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/em_1click_help_z
h_TW.jar:/tmp/OraInstall2006-11-02_08-27-11AM/ext/jlib/cfmlogger_properties.jar
...

EM Configuration issue error

Hello,
We have grid control set up. One of the database shows as agent unreachable. I went into the database server and tried to check the following:
- I went to the /oracle/g01/software/OEM/agent10g/bin and tried emctl status agent and it gave me the below mentioned error:
EM Configuration issue. /oracle/g01/software/rdbms/10.2.0/<db name> not found.
The ORACLE_HOME and ORACLE_BASE variables are fine, but I still get this error.
ORACLE_HOME=/oracle/g01/software/rdbms/10.2.0
It would be great if you could please help me out with this as I am not very familiar with the Grid Control and Enterprise Manager. We have SUN OS.
Thanks,
RPS

Hi,
These files did not exist under $ORACLE_HOME/sysman/emd (meaning they were not created). The agent home we are using is not the $ORACLE_HOME/sysman/emd, but we use the /oracle/g01/software/OEM/agent10g
At /oracle/g01/software/OEM/agent10g we had all these files, i removed them and then tried the commands but the error it gives is the same which is:
EM Configuration issue. /oracle/g01/software/rdbms/10.2.0/<dbname> not found.
I don't know why it is refering to the ORACLE_HOME agent directory instead of /oracle/g01/software/OEM/agent10g
I checked and we do have a directory it is looking for (/oracle/g01/software/rdbms/10.2.0/<dbname>) under /oracle/g01/software/OEM/agent10g
Thanks,
RPS
Edited by: RPS on Sep 16, 2008 1:52 PM

Performing targets discovery and agent configuration --- HANGS

Hello,
I'm running Grid Control 10.2.0.4 on windows2003 server. I have installed the agent on a number of systems with no problem.
BUT, on one server the install seems to HANG during the:
"Performing targets discovery and agent configuration" step.
below is the last entry in my log file. So a couple questions:
1. Any ideas what is going on?
2. If I cancel it the install, can I restart it manually (agentca -d ???)
3. What logs should I look at.
I have tried installing it on this server several times with no luck. I also had problems upgrading from DB 10.2.0.1 to 10.2.0.3. The DBUA would say "thinks this is a Rerun operation" and recommend I remove some file that doesn't exist (but this is a seperate issue, just included it FYI).
installActions2008-03-13_03-03-56PM.log
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '5961654' for restore. This might take a while...
Backing up files affected by the patch '5961654' for rollback. This might take a while...
Patching component oracle.oracore.rsf, 10.2.0.3.0...
Copying file to "g:\oracle\agent10g\bin\oracore10.dll"
Copying file to "g:\oracle\agent10g\rdbms\admin\oracore10.sym"
Copying file to "g:\oracle\agent10g\
lib\oracore10.lib"
ApplySession adding interim patch '5961654' to inventory
Verifying the update...
Inventory check OK: Patch ID 5961654 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 5961654 are present in Oracle Home.
The local system has been patched and can be restarted.
OPatch succeeded.
Finished one-offs apply...
Deleting the files...
Finished deleting the above files...
INFO: Configuration assistant "Oneoff Patch Application" succeeded
INFO: Command = oracle.sysman.emcp.agent.AgentPlugIn
INFO: Install area Control created with access level 1
Performing free port detection on host=gridTEST
Securing the agent
Performing targets discovery and agent configuration
CfmLogger_2008-03-13_03-10-51-PM.log
INFO: oracle.sysman.top.agent:Executing Command: g:\oracle\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe G:\oracle\agent10g\sysman\admin\discover\oracledb.pl G:\oracle\agent10g gridTEST

I get:
G:\>emctl status agent
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.4.0
OMS Version : 10.2.0.4.0
Protocol Version : 10.2.0.4.0
Agent Home : g:\oracle\agent10g
Agent binaries : g:\oracle\agent10g
Agent Process ID : 3548
Agent URL : ( I deleted this)
Repository URL : ( I deleted this)
Started at : 2008-03-13 17:21:11
Started by user : SYSTEM
Last Reload : 2008-03-13 17:21:11
Last successful upload : 2008-03-13 17:21:56
Total Megabytes of XML files uploaded so far : 0.30
Number of XML files pending upload : 3
Size of XML files pending upload(MB) : 0.17
Available disk space on upload filesystem : 9.55%
Last successful heartbeat to OMS : 2008-03-13 17:21:25
Agent is Running and Ready
G:\>emctl pingOMS
Oracle Enterprise Manager 10g Release 4 Grid Control 10.2.0.4.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
EMD pingOMS completed successfully
Now I see the server in Grid Control. THANKS!!!!!!!!!!!!!!

Configuration Issue in User Mapping ..

Hi,
Pls help resolve this issue..
When i go to " UserMapping " option using the "Personalize " link , i get the following error msg..
"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system"
Also , if i go thru "User Administration -> User Mapping "
then it says,
--"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system .
Usually reason is user mapping being configured for Strong encryption, but necessary additional files might be missing.Check Security log file for information "--
I am not able to solve this problem..Pls help
Thanks in advance

Hi Venkat,
Here the quick and dirty solution:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
I would rather recommend to install the unlimited strength jurisdiction policy files.
For more info on this, check this thread:
JCE Jurisdiction does not allow Portal to start
Hope this helps,
Robert

Configuration issue of syslog.conf

Dear All,
My client is facing a configuration issue of syslog.conf.
They have set a cacti on a Linux server for monitoring of all servers snmp & syslog.
The part of snmp has set up successfully but cannot send the syslog to the cacti.
My client want the syslog can keep on the localhost and send to cacti for monitoring
we have tried to do the following things for make it work:
Insert the information (*.* @10.251.99.74) in /etc/syslog.conf
Restart service of system-log
Deleted all word of loghost in the /etc/hosts file
But still not work. Anyone can give me suggestion or idea about this?

Thank you for your reply.
It is tab. But I think the problem is solaris cannot use *.* to represent all logs.
I have used the following is work
*.err;ker.debug;daemon.notice;mail.crit @10.251.99.74
If that is not the mail reason, please put me right.

Anti-relay filter configuration issues

Configuration issues with the anti-relay filter in Messaging Server 4.1x.
The following information addresses common questions about configuration issues
with the anti-relay filter in Messaging Server 4.1x: 

<OL>
<LI>Question: 
What is the difference between the delivery
and submission
options? 

Answer: 
The submission option
allows specified users to send email to any email address in the world.
These users are typically internal users.

The delivery option
allows specified users to receive email from anybody. These users
are also typically internal users.

A standard filter will appear something as follows: 

# This is the anti-relay config file written by Jay at iPlanet
# The first section sets default conditions
resolvehostnames:0
useauthinfo:0
advertiseauthinfo:1
# This section sets domains to be delivered to by anybody
delivery:*@my.domain.com
# This section sets domains that can send any place
submission:129.12.4.*


<LI>Question: 
The delivery
option works properly. However, why doesn't the
submission option
appear to be allowing emails from specified users to pass through?

Answer: 
The problem with the submission behavior could be due to the setting of the
the resolvehostnames
parameter. If this parameter is turned on
(resolvehostnames:1),
then all entries in this configuration file must be fully qualified
host names. Although wildcards will work, you cannot specify IP
addresses with this configuration setting.


<LI>Question: 
Is it possible to allow people outside of my network to connect to the server
and send mail out?

Answer: 
Yes. To allow outside users to connect to the server and send mail
to any address, without granting the same privilege to the rest of the world,
activate the authenticated SMTP portion of the filter via the
useauthinfo option.
Setting this parameter to "1" (i.e., useauthinfo:1
) will require a user who is not in a
submission address and who is attempting to send email to an address not in
the delivery range to authenticate with a user ID and password.
</OL>

For additional information on the anti-relay filter, please refer to the
Messaging Server 4.1 Administrator's Guide at 

http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/ubefiltr.htm#1073677

Prashant:
Are you using a UBE filter to configure domain-based anti-relayinging? We had better luck with the anti-relay plug-in. There is some info on this (for 4.15) at
http://docs.sun.com/source/816-6044-10/ubefiltr.htm#1069973
You have to enable the plug-in using configutil, per the above. The anti-relay plug-in is controlled by antirelay.conf. Be aware that the pattern matching rules are very limited, and not well documented. Fortunately, the source code to the plug-in is included, and you can see what it is doing. To pass the tests we had to add a hard-coded test for a "%" in the source and recompile:
*** antirelay.c.orig Thu Oct 31 04:42:13 2002
--- antirelay.c Thu Oct 31 04:22:07 2002
*** 934,939 ****
--- 934,940 ----
* Weight must be non-zero to begin with so that matches on just "*"
* will work.
+ if( strchr(text,'%') != NULL ) return ABORT;
weight = TRUE;
for ( ; *p; text++, p++) {
if (*text == '\0' && p != '')
Not a really elegant hack, but we didn't need a fully functional regex engine.

Error in Agent Configuration assitant Step in OUI

Hi , it always fail at the same place can you help me ?
Here is the ..../oraInventory/logs/installActions2009-04-02_09-08-47-AM.log thath I have
INFO: Configuration assistant "OMS Configuration" succeeded
INFO: Command = oracle.sysman.emcp.agent.AgentPlugIn
Performing free port detection on host=picasso
Securing the agent
Performing targets discovery and agent configuration
Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
Exception : java.lang.Exception: 6
INFO: Configuration assistant "Agent Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /oracle/OracleHomes/agent10g
Configuration directory is set to /oracle/OracleHomes/agent10g/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were c
ancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwo
rds (if any) before executing the same.
INFO: Since the option is to overwrite the existing /oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands.bak.3
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this
time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK

"CfmLogger_2009-04-07_11-10-42-AM.log" 32 lines, 2851 characters
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /oracle/OracleHomes/agent10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.10_2_0_1_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /oracle/OracleHomes/agent10g/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:10.2.0.1.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.
2.0.1.0:common:family=CFM:oh=/oracle/OracleHomes/agent10g:label=8}
INFO: Framework waiting for Action to complete at 11:11:10.814
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=1 stepIndex=1 microStep=0
WARNING: Unexpected value for property os.name=SunOS; using "env" to retrieve environment variables
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.emcp.agent.AgentPlugIn
INFO: oracle.sysman.top.agent:Classpath = /oracle/OracleHomes/agent10g/jlib/srvm.jar:/oracle/OracleHomes/agent10g/jlib/srvmhas.jar:/oracle/Ora
cleHomes/agent10g/oui/jlib/srvm.jar:/oracle/OracleHomes/agent10g/sysman/jlib/agentPlug.jar:/oracle/OracleHomes/agent10g/jlib/emConfigInstall.j
ar:/oracle/OracleHomes/agent10g/sysman/jlib/emagentSDK.jar
INFO: Error reading file /oracle9i/ora9i2/sysman/config/emd.properties
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2
.0.1.0:common:family=CFM:oh=/oracle/OracleHomes/agent10g:label=8} failed with an unhandled exception:
java.lang.Exception: 8
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:242)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:217)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 11:11:10.814

Agent configuration issue

Similar Messages

Maybe you are looking for