Agent Desktop Error when CCM1 server fails..
hi,
I have configured IPCCX in HA environment.. so there are two CCM servers (CCM1 and CCM2) and two IPCCX servers (IPCCX1 and IPCCX2)..i have configured extension mobility service in redundant mode...I also associated the phone with RM JTAPI provider.. every thing works fine when both ccm servers are up, means agent are able to login to both phone and the agent desktop.. but when i remove the network cable of CCM1. the phone successfully login (after some delay).. but agent desktop gives the following error..
"Login failed due to configuration error.. please ask your system administrator to associate your phone with the rmjtapi provider user id according to the instruction in the administrator guide"
Even though i have associated the RM CM Jtapi provider with the phone... this situation only occurs when i down the ccm1 server.. if both servers are up every thing works fine.... any idea about it...
Regards
Naresh Rathore
hi,
i added the ip addresses of the cucm server with the hostnames in ipccx servers on the following location and it resolved the issue.
c:\winnt\system32\drivers\etc
i entered the ip of ccm and ipccx with host names in the "host" and "lmhost" files...
Regards
Similar Messages
-
Agent Desktop Error When receive Incoming Call
Hi, I have CAD Ver 8.5.1.39 | CUCM Ver 8.5.1.10000-26 | UCCX Ver 8.5.1.10000-37 running on my network now.
there some problem occurs when I put an Agent into the Line Group with Top Down Distribution call(actualy all the Distribution call type face the same problem).
1. When the Agent Receive Incoming Call from outside(PSTN) sometimes the CAD don't Show Up and show no response but the CIPC work normaly. showed in Not Responded.jpg
2. When the Agent Receive Call and it is show up. I can't answer the call. When I press ctrl-A or i push the answer icon i got the error message show in error.jpg , sometimes when i want to make a call the same problem happens
3. When the Agent Pop Up and the caller end the Call before I can answer. The call got stuck in Agent and Agent cannot make a call. Agent must logout and login again to fix this problem, show on the stuck.jpg
4. When the problem 3 occurs and if the Agent don't fix this problem, the stack got more caller. show in stuck2.jpg
I dont know why this happen, all the call come from outside(PSTN). when I test call from internal the problem doesn't occur.
Please help me. Any help will be helpful
Thank you for your help and participation
Regards,
Yopie.Hi,
I have an auto attendant, for example like this:
Welcome to the XYZ Company,
Press 1 for purchasing (10 Agent)
Press 2 for Consult (5 Agent)
Or press 0 for operator help (3 Agent)
When the consumer press 1, I want the call distribute to 10 Agent in the Purchasing team.
To make scenario like this I use the hunt pilot and to use hunt pilot i must have line group first.
So I need to put the 10 Agent into the Line Group.
Thanks. -
Tuxedo 3139 error - Secondary Event server failed!!
Hi all,
we're havin a msater/slave Tuxedo configuration. When we booted the servers, we're getting the error repeatedly in the slave logs:
3139
ERROR: Secondary Event Server failed to get a new copy of subscription database from the Primary, errstr=TPENOENT NOT FOUND
Could anyoone please explain why its happening??Atheek,
The CMDTUX_CAT:3139 message is logged when TMSYSEVT cannot find a server
offering the ..TMSYSMIB service or when TMUSREVT cannot find a server
offering the ..TMUSRMIB service. These services are usually offered by the
primary event broker.
This message might occur if the application specifies all event broker
servers as secondary. (One of the event brokers should be started without
the -- -S option, and that server will be the primary event broker.) The
message also might occur if the primary event broker dies and is not marked
as restartable.
You can observe which servers if any offer the ..TMSYSMIB and/or ..TMUSRMIB
services by invoking tmadmin and giving the "psc -a 2" command. (The "-a 2"
option will cause the command to include service names that start with a "."
or with a "..".)
Ed
<Atheek Rahuman> wrote in message news:[email protected]..
Hi all,
we're havin a msater/slave Tuxedo configuration. When we booted the
servers, we're getting the error repeatedly in the slave logs:
3139
ERROR: Secondary Event Server failed to get a new copy of subscription
database from the Primary, errstr=TPENOENT NOT FOUND
Could anyoone please explain why its happening?? -
I received the following Cisco Secure Desktop error when trying to
I received the following Cisco Secure Desktop error when trying to use WebVpn. "Access Denied Your system failed to be validated by the Cisco Secure Desktop and will not be granted access. Critical failure. Cisco Secure Desktop must run and validate your system. When I go verify Safari settings under "Weblaunch Platform detection, sun Java and Java Detection are all clicked. I even change the DNS in safari system preferences, to no avail.
My system is MacBook Pro 2.8 GHz Intel core i7 with 16 GB 1600 MHz DDR3.
Thanks.Sorry I don't really understand.... there are no partitions on the drive. How do I repartition it?
And should I use "erasing free space" or "erase" for wiping clean my drive of everything? Erase seems to be faster last tiem I tried.
Thanks! -
TREX error 5500: NameServer error: communication with server failed
Hello TREX Gurus,
After applying the latest NW 7.0 SPS18, TREX is no longer working. We are getting this error message in the TREX Administration.
"5500: NameServer error: communication with server failed;connection refused,location=sap01:37001"
Any helps is greatly appreciated,
Davewe have same problem... did you find a solution?
best regards -
Hi,
We are receiving the error "calls has failed because resources not availble.Please wait a moment and
try again" in the agent desktop as CTI warnings.
How to solve this issue.
Regards
krishna.Would you please be kind to share the solution, if it was found?
Got same trouble. The initial call is received, then when you try to transfer it to ICM script (sometimes it works), the source IP communicator hangs up and the destination agent receives this CAD message.
So, callflow is:
1. Customer from PSTN to ICM Script -> Agent 1
2. Agent 1 -> ICM Script -> Agent 2 (here we got a 80% chance to receive this message on Agent 2 screen, and a "zombie" softphone process on Agent 1)
3. Customer -> Agent 2 (if succeeded).
Happens only with two ICM scripts. -
Error when starting server from NetWeaver Studio
I get the following error when i start the server from NetWeaver studio. Any reason why this error pops up.
Problem Occurred:
Startting Server - SAP Server E<24> (Time of error.....)
Reason :
JsfOpenAdmin failed: object not found.
However I can start and stop the server from the management console.
thanks,
Sahir
Edited by: Sahir Pathan on Jul 14, 2008 5:30 PMHello Sahir,
Can you post some other error logs ?
Regards,
Siddhesh -
Getting error: Report Application Server failed
I started posting my problem in thread below and have been advised to continue in this forum
Reference thread: The Report Application Server failed
My problem occurs in a asp application (vb 2005) and also when I run the Crystal Report stand alone (xi rel 2).
The asp application does not render any other messages than "report Application Server Failed" but running the CR stand alone I get "error formatting cross tab object". Whenver I get this message and if I switch page setting (either from landscape to portrait or portrait to landscope) it work for the report in question.
I have now advanced a little further in trying to solve the issue or at least find what is wrong. I have created a .net windows application where I export the CR to disk
Dim DiskOpts As CrystalDecisions.Shared.DiskFileDestinationOptions = New CrystalDecisions.Shared.DiskFileDestinationOptions
myCrystalReport1.ExportOptions.ExportDestinationType = CrystalDecisions.[Shared].ExportDestinationType.DiskFile
myCrystalReport1.ExportOptions.ExportFormatType = CrystalDecisions.[Shared].ExportFormatType.PortableDocFormat
DiskOpts.DiskFileName = ReportPath & ReportName
myCrystalReport1.ExportOptions.DestinationOptions = DiskOpts
myCrystalReport1.Export()
I get the same problems, some reports will not let me export and I am getting error:
CrystalDecisions.CrystalReports.Engine.InternalException: The Report Application Server failed ---> System.Runtime.InteropServices.COMException (0x800003E5): The Report Application Server failed
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
My default page set up is landscape and if I now reverse the page set up like: myCrystalReport1.PrintOptions.PaperOrientation = PaperOrientation.Portrait it will let me export.
My windows application exports hundreds of reports in a single run and by toggling between landscape and portrait I manage to get it working when I get an export error (like above).
Was hoping that anyone couldm point me in a good direction, I've been fighting this problems for many days now and I do not have a solution as to why this is happening. Thank you.Hi,
The cross-tab reports that are causing this error, do they have any formatting formulas on any of the objects?
Are your using any running totals or setting the Evaluation Time using WhilePrintingRecords?
I've run into this problem with crosstabs when I created a Display String formula using Running Totals.
The report cannot render the report because the running total is conflicting with the results of the crosstab.
When you right-click an object and go to Format Field. In the Common tab if the Display String has a formula set, remove or comment it out. Do this for all the objects and try running the report again.
Good luck,
Brian -
Getting an Error When Running Server 2012 R2 adprep /forest prep on a 2012 DC
I am getting an error when running adprep /forest prep on a Server 2012 domain controller. The main parts of my domain are as follows:
2 - Domain Controllers running Server 2012
1 - Exchange Server 2013 running on Server 2012
I am trying to either do an in-place upgrade to my domain controllers to Server 2012 R2 or even introduce a Server 2012 R2 domain controller into the domain. The error I am getting is as follows:
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_search_s() finished, return code is 0x20
[2014/04/05:09:12:38.873]
Adprep verified the state of operation cn=38618886-98ee-4e42-8cf1-d9a2cd9edf8b,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=DOMAIN,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2014/04/05:09:12:38.873]
Adprep was about to call the following LDAP API. ldap_modify_s(). The entry to modify is CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[2014/04/05:09:12:38.873]
LDAP API ldap_modify_s() finished, return code is 0x13
[2014/04/05:09:12:38.905]
Adprep was unable to modify some attributes on object CN=ad://ext/AuthenticationSilo,CN=Claim Types,CN=Claims Configuration,CN=Services,CN=Configuration,DC=DOMAIN,DC=local.
[User Action]
Check the log file ADPrep.log in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
[2014/04/05:09:12:38.936]
Adprep encountered an LDAP error.
Error code: 0x13. Server extended error code: 0x20b1, Server error message: 000020B1: AtrErr: DSID-030F112A, #1:
0: 000020B1: DSID-030F112A, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 9086f (msDS-ClaimIsValueSpaceRestricted)
DSID Info:
DSID: 0x181112dd
ldap error = 0x13
NT BUILD: 9600
NT BUILD: 16384
[2014/04/05:09:12:38.967]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20140405091235 directory for more information.
Any Help would be appreciated. Thanks!Hi,
did you check which servers has FSMO roles?
You can do that via command prompt: netdom query fsmo
For forestprep you must do that on DC which have Schema Operations marter role.
Command
Domain controller
Number of times to run the command
adprep /forestprep
Must be run on the schema operations master for the forest.
Once for the entire forest
adprep /domainprep
Must be run on the infrastructure operations master for the domain.
Once in each domain where you plan to install an additional domain controller that runs a later version of Windows Server than the latest version that is running in the domain.
Note
Domains where you will not add a new domain controller will be affected by adprep /forestprep, but they do not require you to run adprep /domainprep.
http://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx -
Hi,
I am running Cisco UCCX 5.0(2) with UCCM 6.1. When I try to launch the cisco agent desktop I get "The license and resource manager may be down.
Please talk to your administrator". CRS is running on high availabiltiy and both are reachable to UCCM through JTAP synch.
I tried to restart all services manually also restarted both CCX and CUCM servers. Still it shows same.
Please advice
Regards
FiroseHi,
All the configuration was correct as per your updates. But it is working after restarting whole servers (CCX & CUCM).
I coudn't find the route cause of the problem
Thanks
Firose -
Re-scheduling reports when Report Server fails?
Is there a method to re-schedule previously cheduled reports in the scenario that for instance, the report server fails for whatever reason? My scenario is that I had a report server have a problem overnight and the reports that were scheduled did not execute. Is there a fairly straight forward way to identify and reschedule the reports that did not run?
Thanks
MarcThere might be a way. When you schedule a report through CMC under Recurrence you have an option "Number of retries allowed" and "Retry interval in seconds". Set the first parameter to be 1. If the report server fails overnight, then what you can do is set the interval seconds to be a big number, so that the next retry would be in the morning when someone would have restarted the server.
- Noman Jaffery -
Send a message error: "The sync server failed to sync with the iphone"
Itunes 11 send a message error the sync server falied to sync with the iPhone.
Itunes does not sync contacs with my iphonei did this step. but still it says syncing failed... am having iphone 5 updated to 6.1.4 & itunes is updated to 11.0.4.. pls help!!
-
Error when starting server -urgent
Hi friends
When I try to start the weblogic server I am getting thre following error message
at the console. Everything was working fine last week.
I create the .ear file from websphere studio and move to the applications directory
under weblogic.
The error says failed on recompiling JSP's , I tried to turn off that option but
after I start the server it comes back again
Please advise
-INF\lib\design_pro51224.jar;C:\bea\user_projects\backorderDomain\.\boServer\.wl
notdelete\_appsdir_backorder_ear_backorderWeb.war_1579863\jarfiles\WEB-INF\lib\e
tools51225.jar;C:\bea\user_projects\D
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Win32Process.java:61)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:546)
at java.lang.Runtime.exec(Runtime.java:472)
at java.lang.Runtime.exec(Runtime.java:438)
at weblogic.utils.Executable.exec(Executable.java:208)
at weblogic.utils.Executable.exec(Executable.java:133)
at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvo
ker.java:545)
at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:
354)
at weblogic.servlet.jsp.Precompiler.compileOne(Precompiler.java:205)
at weblogic.servlet.jsp.Precompiler.compile(Precompiler.java:55)
at weblogic.servlet.internal.WebAppServletContext.precompileJSPs(WebAppS
ervletContext.java:4133)
at weblogic.servlet.internal.WebAppServletContext.precompileJSPs(WebAppS
ervletContext.java:4126)
at weblogic.servlet.internal.WebAppServletContext.prepareFromDescriptors
(WebAppServletContext.java:1932)
at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletCont
ext.java:1065)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletCo
ntext.java:1001)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:467)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:318)
at weblogic.j2ee.J2EEApplicationContainer.prepareWebModule(J2EEApplicati
onContainer.java:1476)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
er.java:652)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
er.java:552)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(Sla
veDeployer.java:1056)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDep
loyer.java:724)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHan
dler.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
>
<Jul 21, 2003 2:47:03 PM EDT> <Error> <Deployer> <149201> <The Slave Deployer
fa
iled to complete the deployment task with id 1 for the application appsdirback
order_ear.
weblogic.management.ApplicationException: Prepare failed. Task Id = 0
Module Name: backorderWeb.war, Error: Could not load backorderWeb.war: weblogic.
utils.NestedException: appsdirbackorder_ear:backorderWeb.war Failure while Pre
compiling JSPs: java.io.IOException: Compiler failed executable.exec(java.lang.S
tring[e:\opt\weblogic\7.0\jdk131_02\bin\javac, -classpath, "C:\bea\jdk131_03\jre
I figured it out
problem with the javac classpath for JSP
"DN" <[email protected]> wrote:
>
Hi friends
When I try to start the weblogic server I am getting thre following
error message
at the console. Everything was working fine last week.
I create the .ear file from websphere studio and move to the applications
directory
under weblogic.
The error says failed on recompiling JSP's , I tried to turn off that
option but
after I start the server it comes back again
Please advise
-INF\lib\design_pro51224.jar;C:\bea\user_projects\backorderDomain\.\boServer\.wl
notdelete\_appsdir_backorder_ear_backorderWeb.war_1579863\jarfiles\WEB-INF\lib\e
tools51225.jar;C:\bea\user_projects\D
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Win32Process.java:61)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:546)
at java.lang.Runtime.exec(Runtime.java:472)
at java.lang.Runtime.exec(Runtime.java:438)
at weblogic.utils.Executable.exec(Executable.java:208)
at weblogic.utils.Executable.exec(Executable.java:133)
at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvo
ker.java:545)
at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:
354)
at weblogic.servlet.jsp.Precompiler.compileOne(Precompiler.java:205)
at weblogic.servlet.jsp.Precompiler.compile(Precompiler.java:55)
at weblogic.servlet.internal.WebAppServletContext.precompileJSPs(WebAppS
ervletContext.java:4133)
at weblogic.servlet.internal.WebAppServletContext.precompileJSPs(WebAppS
ervletContext.java:4126)
at weblogic.servlet.internal.WebAppServletContext.prepareFromDescriptors
(WebAppServletContext.java:1932)
at weblogic.servlet.internal.WebAppServletContext.init(WebAppServletCont
ext.java:1065)
at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletCo
ntext.java:1001)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:467)
at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:318)
at weblogic.j2ee.J2EEApplicationContainer.prepareWebModule(J2EEApplicati
onContainer.java:1476)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
er.java:652)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContain
er.java:552)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(Sla
veDeployer.java:1056)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDep
loyer.java:724)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHan
dler.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
>
<Jul 21, 2003 2:47:03 PM EDT> <Error> <Deployer> <149201> <The Slave
Deployer
fa
iled to complete the deployment task with id 1 for the application appsdirback
order_ear.
weblogic.management.ApplicationException: Prepare failed. Task Id = 0
Module Name: backorderWeb.war, Error: Could not load backorderWeb.war:
weblogic.
utils.NestedException: appsdirbackorder_ear:backorderWeb.war Failure
while Pre
compiling JSPs: java.io.IOException: Compiler failed executable.exec(java.lang.S
tring[e:\opt\weblogic\7.0\jdk131_02\bin\javac, -classpath, "C:\bea\jdk131_03\jre -
FTP Adapter File Polling does not raise error when FTP server is down
Hi All,
Thanks in advance.
I am polling for new files in a FTP Server. However, if the server is down there is no way for me to catch the fault to notify someone. I am using fault-policies but that never gets triggered when polling an unavailable FTP Server.
One option is to have a completely separate scheduled process (SOA or not) that tries to connect to the servers but I am trying not to go that route just to keep things manageable and within the realm of the process.
I am sure that I am not the only one polling for new files in a FTP Server, so I thought to pick your brain to tackle this scenario.
Thanks for taking the time to read this.I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10 -
Get error when passing server name to Crystal Reports in Visual Studio 2012
Hello,
I work on Visual Studio 2012 with Crystal Report 13.0.12 (both developer and run-time). When I pass the name of the server to the Crystal Reports, I get an error -- Failed to open the connection. Database Vendor Code 17. I use SQL OLEDB as the provider. It worked before. Not sure what has happened.
Any help is much appreciated!!!
JohnHi,
See this: Failed to open the connection - database vendor code 17
--dj
Maybe you are looking for
-
IPhone 5s visual screen issues
My phone just started doubling all the icons as well as all content in emails and texts or anything else. I am unable to read any thing and it is shaking on top of this. I have turned the phone off multiple times I have gone to setting and can't chan
-
When I choose to open a new tab from a website, such as facebook, it always opens it in a new window. How do I change this to just opening a new tab. I tried changing the tab settings but it did not work. I did not have the problem until I started us
-
Download to excel from web report generated through ITS
We were on SAP 4.6B. We have several abap reports for which we have a web interface using ITS. On the broweser output we have provided a URL which reads 'Download to CSV file' . This has been achieved by modifying the function www_get_report. The mod
-
Problems copying files from Buffalo Linkstation
I have just set up a new Lion server (Mac Mini) and I'm trying to copy a large folder hierarchy from a Buffalo Link Station to a share on the server. I am logged into the Buffalo as an administrator user and I'm logged into the Lion server as a user
-
How to restore apple as my Safari start page?
DivX Player instaled a Bing - agent in my iMac/OSX 10.7.5, now my start page for Safari is not Apple, but "Bing". I do not want it, I'd like to restore the Apple page. Any ideas?