Agent desktop login error line error

I have a 7941 and Soft IP phone with same ext 1100. I changed the 7941 DN to 1199. Now my agent can not log on to the softphone 1100 it shows line error. The problem I had is when she was at her desk both phones would ring. She only logs into softphone to assist on calls.

I had to call TAC on this. I had to remove the ext under the CM under User Manager/application/RMADMIN remove that ext under controlled devises and replace and then it worked.

Similar Messages

  • Agent Desktop Error when CCM1 server fails..

    hi,
    I have configured IPCCX in HA environment.. so there are two CCM servers (CCM1 and CCM2) and two IPCCX servers (IPCCX1 and IPCCX2)..i have configured extension mobility service in redundant mode...I also associated the phone with RM JTAPI provider.. every thing works fine when both ccm servers are up, means agent are able to login to both phone and the agent desktop.. but when i remove the network cable of CCM1. the phone successfully login (after some delay)..  but agent desktop gives the following error..
    "Login failed due to configuration error.. please ask your system administrator to associate your phone with the rmjtapi provider user id according to the instruction in the administrator guide"
    Even though i have associated the RM CM Jtapi provider with the phone... this situation only occurs when i down the ccm1 server.. if both servers are up every thing works fine.... any idea about it...
    Regards
    Naresh Rathore

    hi,
    i added the ip addresses of the cucm server with the hostnames in ipccx servers on the following location and it resolved the issue.
    c:\winnt\system32\drivers\etc
    i entered the ip of ccm and ipccx with host names in the "host" and "lmhost" files...
    Regards

  • CTI Toolkit Agent Desktop 7.5(1) has stopped working

    Dear Support,
    We have an IP Telephony setup with Call centre Enterprise.
    The CTIOS crashes on the Windows 7 64bit OS.
    CTIOS version : 7.5.1
    Whenever we run the Agent desktop application, the below error message is displayed.
    Also we have tried reinstalling the application and also tried running on compatibility mode as well, and it still did not solve the issue.
    Thanks in advance
    Nithin Louis.

    Hi,
    I found that the CTIOS 7.5.1 is not compactable with Windows 7 64 bit .
    you can access the CTI OS Client on Windows 7 64-bit Starting with CTI OS Release 8.5(2).
    For this you have to install the 8.0(1a) installer is required.
    I am able to download the 8.5(2) from the Cisco site but 8.0(1a) is not available.
    Could you please share the link for download the 8.0(1a).
    Regards
    Nithin Louis.

  • Error Logging into Cisco Agent Desktop whilst using Cisco IP Communicator

    Hi there,
    I am having an issue whilst using Cisco Agent Desktop Version 7.0.  If I use a cisco IP Communicator ( softphone) i get following message, "Login failed due to a configuration error. Please ask you system administrator to associate your phone with the RM JTAPI Provider user ID according to the instructions in the admin guide".
    If user logs in to a normal Cisco phone then logs into agent there are no problems.
    Bit of a novice so your help would be appreciated.

    Hi
    In your AppAdmin pages on UCCX, in the Unified CM Configuration screen, there is an 'RM' user defined.
    This will be a user in CCMAdmin 'Application Users', which has all your CCX phones associated to it. UCCX uses this to CTI control the handsets... you need to associate the CIPC phone to that user.
    Regards
    Aaron
    Please rate helpful posts...

  • Cisco agent desktop has encountered a problem and needs to close error

    A Remote Hotline user is experiencing crashes with her desktop agent.  After logging into the program it generated the error message "The Cisco Agent Desktop has encountered a problem and needs to close"
    I have removed the agent from add remove programs, re installed it and attempted to run it logged in as an admin and using both mine and the user's agent credentials and the program still crashes.
    Agent desktop ver 5.0 Build 6.4.2.12  Windows XP 
    Any ideas?
    Regardes, Chet

    Thanks for the reply, this is what I did to resolve it:
    Fix:
    Uninstalled Desktop agent from add remove programs
    Re installed program
    Do a complete restart or the prog will continue to crash
    Test program by logging in with user’s credentials

  • CTIOS AGENT DESKTOP ERROR

    Hi,
    We are receiving the error "calls has failed because resources not availble.Please wait a moment and
    try again" in the agent desktop as CTI warnings.
    How to solve this issue.
    Regards
    krishna.

    Would you please be kind to share the solution, if it was found?
    Got same trouble. The initial call is received, then when you try to transfer it to ICM script (sometimes it works), the source IP communicator hangs up and the destination agent receives this CAD message.
    So, callflow is:
    1. Customer from PSTN to ICM Script -> Agent 1
    2. Agent 1 -> ICM Script -> Agent 2 (here we got a 80% chance to receive this message on Agent 2 screen, and a "zombie" softphone process on Agent 1)
    3. Customer -> Agent 2 (if succeeded).
    Happens only with two ICM scripts.

  • Error from Cisco Agent Desktop - The agent- or workflow-initiated action request failed.

    We have roughly 20 agents using Cisco Agent Desktop version 85.1.417 and I have one that when she clicks the phone button to answer a call she gets the error: "The agent-  or workflow-initiated action request failed."
    I reinstalled the program, but she still receives the same error.  What could be causing this problem?

    This is what I found in the log:
    2014-10-06 08:59:46:838 INFO VOIP2021 Desktop monitoring enabled for extension [9214].
    2014-10-06 09:00:12:147 WARN STD3000 Get registry key <MTS_CitrixInstall> under path <SOFTWARE\Calabrio\CAD\Site Setup>. Object not found: <2:The system cannot find the file specified.>.
    2014-10-06 09:00:12:159 INFO SOCKET0000 <CADEEMConnector> service on port <59015> has started.
    2014-10-06 09:01:01:580 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781617 != 37533406)
    2014-10-06 09:09:28:543 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781655 != 37533406)
    2014-10-06 09:13:42:458 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781669 != 37533406)
    2014-10-06 09:29:03:809 INFO PD4002 error while answering call ICDJtapiCallControlChannel (answer) error, invalid callId (17781740 != 37533406)
    I'm attaching part of the DBG log.  I hope that it helps.
    Thanks

  • Login: PAM Error (line 313): Critical error - immediate abort?

    Hi there,
    so I'm having problem with my MacBook Air. Since a few days it is taking realllly long to start up.
    And it asks my password (even I didn't require that).
    When I checked my Terminal it said: login: PAM Error (line 313): Critical error - immediate abort
    what can I do? can someone help me?
    Thanks!

    Post Unix/Terminal queries in the Unix forum under OS X Technologies.

  • Agent Desktop Error

    Hi,
    I am running Cisco UCCX 5.0(2) with UCCM 6.1.  When I  try to launch the cisco agent desktop I get "The license and resource manager may be down.
    Please talk to your administrator". CRS is running on high availabiltiy and both are reachable to UCCM through JTAP synch.
    I tried to restart all  services manually also restarted both CCX and CUCM servers. Still it shows same.
    Please advice
    Regards
    Firose

    Hi,
    All the configuration was correct as per your updates.  But it is working after restarting whole servers (CCX & CUCM).
    I coudn't find the route cause of the problem
    Thanks
    Firose

  • Error State Id 11756 and Client side Scan Agent.log file shows with Error=0x8024400d

    We 1500 clients which managed through SCCM 2007. out of 1500 workstations 300 are showing failed to install updates with following error code from scanagent.log. Also the error state messge id is 11756
     -Scan Failed for ToolUniqueID={CACC0F54-E6B6-40AA-8BCD-81A1C7BE2918}, with Error=0x8024400d
    Error From WUAHanlder.log
    OnSearchComplete - Failed to end search job. Error = 0x8024400d.
    I searched over google for this issue and found some thing related with Group policy, but there is no exact cause and solution found for this. Could you please some one help me on this.

    1. On the affected machine, disable the SCCM Agent. To do this, you can run the following commands:
    Disable the Service --> sc config CcmExec start= disabled
    Stop the Service  net stop CcmExec
    2. Ensure that the following policy is not enforced on the system:
    User Configuration\Administrative Templates\Windows Components\Windows Update\Remove access to use all Windows Update Features
    Check this first in the local system policy (you can pull this up using gpedit.msc – Local Group Policy Editor). After that, please run RSOP.msc and ensure that the policy is not configured either. This will give you information from domain policies too.
    If the policy is enabled please either remove the policy or disable it.
    3. Restart the Automatic Updates service.
    4. Now, from the command line, run the following command:
    Configure Proxy  proxycfg.exe –p “WSUS SERVER FQDN”
    By doing this, we are configuring WinHTTP so that server access in upper case is also bypassed.
    At this point, we need to test an update scan. Since the SMS Host Agent service is disabled and stopped, we won’t be able to use the agent to run the scan. In this case, we would need to run a scan using the command below:
    wuauclt /resetauthorization /detectnow
    Check Windowsupdate.log for the outcome of the testing
    How to Bypass Proxy server for testing purpose using proxycfg untility. (More details http://msdn.microsoft.com/en-us/library/windows/desktop/ms761351(v=vs.85).aspx). Also find the registry entries you can check for bypass list – “HKEY_LOCAL_MACHINE\
    SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\Connections\” .
    RanzHat

  • Error: You cannot login because an error occurred while retrieving the login URL. (WW

    Situation is this.. was using 8.1.6 EE and Oracle Portal.. was able to get the Oracle Portal page up and after a while the application died.. this happened numerous times. Found in one of these forums that a bug existed (UTL_HTTP) and recommended going to 8.1.7 EE because of a patch. I migrated my 8.1.6 EE to 8.1.7 EE(made sure procedures & packages were valid). I'm able to bring up the Oracle Portal page but when I go to login I get this:
    Error: You cannot login because an error occurred while retrieving the login URL. (WWC-41441)
    Thoughts?

    Hi,
    I ran ssodatan again and got the following error:
    ERROR: Setting Login Server Partner App
    ORA-06508: PL/SQL: could not find program unit being called
    I then found out that the wwsec_sso_enabler_private in the SSO
    schema is invalid and this was causing the above error. I tried
    recompiling the package but got the following error:
    Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
    LINE/COL ERROR
    151/6 PL/SQL: SQL Statement ignored
    151/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    151/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    160/4 PL/SQL: SQL Statement ignored
    643/6 PL/SQL: SQL Statement ignored
    643/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    643/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    LINE/COL ERROR
    651/4 PL/SQL: SQL Statement ignored
    713/4 PL/SQL: SQL Statement ignored
    713/50 PLS-00382: expression is of wrong type
    745/3 PL/SQL: SQL Statement ignored
    746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
    allowed in this context
    The same package in the Portal schema is valid. Will an
    export of this package from a working instance and an import into
    the above instance solve this problem?
    Thanks and Regards,
    Rupesh

  • Download of adobe creative cloud desktop always stops with error code 207. Trying for 6 hours now. What now?

    Hi.
    I started a Creative Cloud abonement and try to install applications. But the download of the "adobe creative cloud desktop" always stops with error code 207 (No answer from server, try later). I am trying for 6 hours but the problem is still the same. What can I do?
    Thank you,
    Heiko

    Errors 201 & 205 & 206 & 207 or several U43 errors
    -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Workaround for "Expected expression but found end of line" error

    I have the following code
    tell application "Mail"
    set mymailList to {"[email protected]", "[email protected]", "[email protected]"}
    set myattachmentList to {"Macintosh HD:Users:SAM:Desktop:A1.xls", "Macintosh HD:Users:SAM:Desktop:A2.xls", "Macintosh HD:Users:SAM:Desktop:A3.xls"}
    set n to count items in mymailList
    set i to 0
    repeat n times
    set i to i + 1
    set var1 to item i of mymailList
    set var2 to item i of myattachmentList as alias
    set newmessage to make new outgoing message with properties {visible:true, subject:"Report", content:"Blah Blah Blah"}
    tell newmessage
    set sender to "Sam <[email protected]>"
    set visible to true
    make new to recipient at end of to recipients with properties {address:var1}
    tell content to make new attachment with properties {file name:var2} at after last paragraph
    end tell
    activate
    send newmessage
    end repeat
    end tell
    I would like to be able to paste the MailList and MailAttatchmentList values from a spreadsheet so that it would look something like this:
    tell application "Mail"
    set mymailList to {
    "[email protected]",
    "[email protected]",
    "[email protected]"
    set myattachmentList to {
    "Macintosh HD:Users:SAM:Desktop:A1.xls",
    "Macintosh HD:Users:SAM:Desktop:A2.xls",
    "Macintosh HD:Users:SAM:Desktop:A3.xls"
    set n to count items in mymailList
    set i to 0
    repeat n times
    set i to i + 1
    set var1 to item i of mymailList
    set var2 to item i of myattachmentList as alias
    set newmessage to make new outgoing message with properties {visible:true, subject:"Report", content:"Blah Blah Blah"}
    tell newmessage
    set sender to "Sam <[email protected]>"
    set visible to true
    make new to recipient at end of to recipients with properties {address:var1}
    tell content to make new attachment with properties {file name:var2} at after last paragraph
    end tell
    activate
    send newmessage
    end repeat
    end tell
    Is there something that I can put at the end of each value so that I avoid the "Expected expression but found end of line" error?
    Thanks!
    Sam

    You didn't need to post the entire script - just an example of the list format would have done
    Anyway, AppleScript uses option-return as a 'soft' return/line continuation character, so:
    set mymailList to {¬
    "[email protected]",¬
    "[email protected]",¬
    "[email protected]
    (where ¬ indicates an option-return) will work. I'm just not sure off hand how you'd automatically insert option-return characters coming out of Excel...

  • You cannot login because an error occurred while retrieving the login URL.(WWC-41441)

    Hi,
    I have a Portal install with the following specifications:
    OS - Sun Solaris 2.6
    DB - 8.1.7.0.0
    iAS - 1.0.2.2
    Portal - 3.0.9.0.7
    It was working fine. Then the initjvm.sql that installs the JVM
    in the database was run. This was done as part of the steps
    required for enabling the UTL_SMTP. The script ran without any
    errors but after that Portal Login was failing with the following
    error:
    You cannot login because an error occurred while retrieving the
    login URL. (WWC-41441)
    and there were no Java classes present in the Portal or SSO
    schema. To overcome this error I reloaded the SSOHash classes to
    Portal and SSO schemas and ran ssodatan. The script ran
    successfully and I was able to login to the Portal after that.
    However, if I login as the administrator and try to create or
    edit users from the Administer tab of Portal, the same error
    occurs again:
    You cannot login because an error occurred while retrieving the
    login URL. (WWC-41441)
    I can programmatically add users using the Security APIs.
    The wwsec_enabler_config_info$ table of the Portal schema
    contains one row but the wwsec_enabler_config_info$ table of the
    SSO Schema contains no rows.
    This install of Portal is hosting a number of applications and as
    such running opca again is not an option.
    Any workaround for this?
    Thanks,
    Rupesh

    Hi,
    I ran ssodatan again and got the following error:
    ERROR: Setting Login Server Partner App
    ORA-06508: PL/SQL: could not find program unit being called
    I then found out that the wwsec_sso_enabler_private in the SSO
    schema is invalid and this was causing the above error. I tried
    recompiling the package but got the following error:
    Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
    LINE/COL ERROR
    151/6 PL/SQL: SQL Statement ignored
    151/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    151/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    160/4 PL/SQL: SQL Statement ignored
    643/6 PL/SQL: SQL Statement ignored
    643/13 PLS-00320: the declaration of the type of this
    expression is incomplete or malformed
    643/20 PLS-00336: non-object-table "SECI" illegal in this
    context
    LINE/COL ERROR
    651/4 PL/SQL: SQL Statement ignored
    713/4 PL/SQL: SQL Statement ignored
    713/50 PLS-00382: expression is of wrong type
    745/3 PL/SQL: SQL Statement ignored
    746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
    allowed in this context
    The same package in the Portal schema is valid. Will an
    export of this package from a working instance and an import into
    the above instance solve this problem?
    Thanks and Regards,
    Rupesh

  • Desktop Software & 9720 Sync Error Message

    When I sync my 9720 with my pc using DTS  I'm getting the following error message:
    Blackberry Desktop Software
    X Synchronisation Error
    A program error occurred at line 604 in .\Mapping cpp.  Please report this error by sending a log to technical support.
    I assume that my data (organiser and contacts) is not syncing properly.  Could someone please advise me how I can put this right
    Thanks
    613

    Hi and Welcome to the Community!
    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • JMS Application on J2EE server

    Hi, How can I run a simple PTP client-server application of JMS on windows platform? I am using a machine running windows 98, on which I have installed JDK1.3 and J2SDKEE1.2.1. I use J2EE server to deploy EJBs and Servlets on localmachine. I want to

  • Disable J2EE Local Auth Task Handler in policy agent 2.2

    Hi, Is there a way of disabling the j2ee local authentication handler for a policy agent 2.2 running in filter mode ALL ? If not, is there a way to configure local authentication without session-binding? I am specially interested in the agent for Web

  • Safari v8.0 unable to remove saved passwords in passwords tab. Help!!

    Just installed Yosemite on my mac and currently running safari v8. I'm don't want my passwords saved in safari and trying to remove my saved passwords. When i click on remove the sites and passwords are still there. How can i remove them from my pass

  • Osi update for older version iPad

    I have an older iPad, my osi version is 5.1.1 my apps are asking for an updated version to work now. How do I get an updated osi? My software update says this version is it? Help

  • HT4007 The selected master image is either offline or not found. Please reconnect it and try again.

    I have my aperture photos stored on a harddrive that is installed in my MacPro. I just tryed to email a photo and the message "The selected master image is either offline or not found. Please reconnect it and try again." popped up.  How can I find th