Agent disappearing from Supervisor Desktop

Greetings -
Can someone help find a solution to my below problem..
Environment:
Cisco Unified CCX premium
9.0.2 SU2 version
Agent desktop: 9.0(2) (Premium); Build: 9.0.2.2021
Problem:
We have three agents out ten who regularly disappear from supervisor desktop. I opened a TAC case with Cisco but could not figure out what is causing the problem. The agent desktop is installed on Win7 64bit, Kaspersky antivirus and no firewall between UCCX and agent. Between UCCX and agent, we have a Cisco 4500 connecting 6500. I also opened a case with Cisco switching team to check if switches have any role in agent disappearing, but nothing was found on the switches. It is interesting that only three users are affected out of all. The affected users' logs on to CAD without any issues in the beginning of the shift, however, after couple of hours i.e. around 11 am agents start to disappear from the supervisor desktop. After the agent disappears, the CAD chat windows appears like below and the <Unavailable> status in the chat windows changes constantly every 10 seconds to <Initializing>
The UCCX capture shows the following:
<AGENT_DESKTOP_user11>. The application will be logged out.
2014-08-20 03:09:46:249 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application <AGENT_DESKTOP_mwoods>. The application will be logged out.
2014-08-20 03:09:50:021 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application
The agent logs shows that the heart beat is sent to the UCCX but UCCX dose not receive anything. While all these are happening, the user can still receive and answer calls, the supervisor though cannot see the user, the reports she runs displays user metrics. However, after few hours, the agent will appears again on supervisor desktop or re logging will make the user appear again.
Has anyone experienced this strange issue?
Thank you in advance.

Thank you for prompt response.
What I did few weeks ago was, created a new account, assigned queues to that new account and then asked the used to use that account just to check if the issue is specific to user account. Even then, the agent (newly created account) was disappearing.
I am sure if I ask the user to use the working agent account, will not have a problem. I will have to check with the supervisor if they want to try this out. I will update you momentarily.

Similar Messages

Agent disappears from Supervisor Display

UCCX 8.5
I have some remote CAD agents who connect via vpn. One in particular always behaves the same. In the Supervisor Display she is counted as "Logged In" but her name will disappear from the Agents and Voice CSQ-Detail displays for 30 seconds. She will then reappear for 30 seconds and this repeats as long as she is logged in. She is able to answer calls, some for over twenty minutes.

It could be the VPN is blocking TCP ports 59000 and 59020 required for the chat communications. I had this happen when a firewall between 2 networks was blocking ports 59000 and 59020.
Bill

UCCX 9.0 Agent is appeaaring and Disappearing from Supervisor

We have installed anew setup and the issue is Agent is appeaaring and Disappearing from Supervisor. As per observations, this is happening every 20 second. Is there a timer in config or something?
we have checked no firewall and antivirus in between.
Any suggestions please

Hi Hina,
This always happens due to one of the following:
++ Different versions of CAD or CSD other than the server - check the version of CAD or CSD and check the compatibility matrix to verify if that is the same for the UCCX version you are running
++ Anti Virus - A big culprit sometimes. Recommended test would be from a PC without these settings.
++ Firewall - Connectivity to the Cisco Desktop Call Chat Service.
Check for the following ports for the UCCX Server:
3001 - Call Chat Service.
3002 - Call Chat Service for Clients over VPN.
These need to be accessible or open for the server from both the CAD and the CSD.
++ Citrix or Thin Client.
If your clients are on thin client such as Citrix or MTS, then check the Port Utilization guide for the ephemeral ports to be open.
Also check the Post install.exe file to have the parameter Thin Client Environment set to Yes.
HTH
Regards,
Arundeep

I just updated Creative Cloud and it disappeared from my desktop. In my profile, there is no longer a subscription to Creative Cloud--Just Photoshop for CS3 customers. What is going on?

A few minutes ago I got a Creative Cloud update notification. I ran the update and Creative Cloud disappeared from my desktop. What happened? I still have Photoshop CC and Bridge CC. But will I still get CC updates? Also I no longer seem to have a Creative Cloud subscription--just something that looks like a monthly fee for keeping Photoshop for customers with Photoshop CS3+. What is going on?

I just had an online Chat with Adobe Support, and we uninstalled CC Desktop and reinstalled it. That fixed the problem. I have no idea what CAUSED the problem though.

I am using an external drive for a time machine backup. It has disappeared from the desktop. How do I get it back again?

My time machine backup disc, which has been working ok for a couple of years has suddenly disappeared from the desktop. The time machine program tels me it is unavailable. I have checked that the drive is working by booting up in Windows. and Windows can see it and read it ok. What has gone wrong, and how can I fix it?
I have tried unplugging it and reconnecting, but it is still apparently not seen by the system.
I could use Windows to reformat it, and start again, but this would loose all my previous backups, and I've no guarantee that the system would notice it even then.
Has anyone any ideas?

I think it's formatted on FAT 32 system, but I'm not sure. It's been working for a couple of years so far without any problems, so I think it must be compatible with Mac. The problem is that all of a sudden, the Mac doesn't acknowledge that it is present.

The word app has disappeared from my desktop computer and can't be found on finder or search. All documents I created on word will now not open unless in "TextEdit" format which I don't use. Any ideas please? Thanks

The word app has disappeared from my desktop computer and can't be found on finder or search. All documents I created on word will now not open unless in "TextEdit" format which I don't use. Any ideas please? Thanks

Did you recently erase and/or reinstall the OS?
And, some details are needed: model/year Mac, Mac OS version running now and which version originally).

Downloads folder disappeared from the desktop?

Hello!
Mavericks user here. Today I was trying to find the downloads folder, you know the folder where all newly downloaded files end up on the right lower border of the screen, and are beautifully filed with the newest download at the bottom.
So for some reason I moved the folder to finder, and it disappeared from the desktop. It is not in finder either. When I searched for it on finder I found the folder again, putted it back on the desktop, but now the downloads are ordered alpahabetically when I download a new file, it looks different.
How do I restore the folder on the desktop in such a way the the newest files come at the bottom?
Thanks a lot in advance!

gitarnoob wrote:
Hello!
putted it back on the desktop,
Do you mean in your Dock?
If so, right-click (CTRL-click) > Sort by > Date Added
If you mean you actuall moved it to your Desktop or created and alias then open the folder, Click the Arrange icon:
and select Date Added

Startup disk disappear from the desktop

Well, without any reason, The startup disk is disappear from the desktop.
(Just only the startup disk)
I found this 2 times before, once on my 8 cores Mac Pro, once on my iMac G5.
I couldn't do anything to fix them, so I formatted and re-install OS.
with my iMac, it ran Tiger before, there's no problem until I changed to Leopard,
After about 2 weeks under the new Leopard,then the startup disk disappear from the desktop,
it shown the hidden status in disk utility and could not mount it,
So I formatted and back to install old Tiger.
Everything's fine. that's really good Operating system.
Bad luck, about 2 months ago, My iMac G5 had some problem with motherboard and the harddisk also damaged, I send it to Apple Thailand, They fixed it and send back with installed Leopard inside my new hard disk.(well... again)
Now after a few weeks. it happen again.
Startup disk disappear from the desktop.
This problem never exist on my Mac Pro, just with the iMac G5.
(Please don't tell me to check the finder preference about the sidebar setting.
it's already set to show every items there even the iDisk)
I wondered why I don't see anyone have problem with this.
I'm really want to find the answer about this.
I asked this question to Apple Thailand's support team but they didn't have any idea.
Who's gonna answer this

I found a solution to the problem and posted it here:
http://discussions.apple.com/thread.jspa?threadID=1858340&stqc=true
I pasted the solution below:
from a Terminal window, type:
ls -lOd /
(That's lowercase ell, lowercase ess, space, minus, lowercase ell, capital oh, lowercase dee, space, forward slash)
You should get something like this:
hostname:~ username$ ls -lOd /
drwxrwxr-t 32 root admin - 1156 Feb 8 20:35 /
Sounds like you might see something like this instead:
hostname:~ username$ ls -lOd /
drwxrwxr-t@ 32 root admin hidden 1156 Feb 8 20:35 /
(note it says "hidden" instead of "-")
To fix this, type:
sudo chflags nohidden /
and provide your admin password. You won't get any output back from the command but the icon should now appear on your desktop, and the hidden flag should go away if you repeat the 'ls -lOd /' command.
And just in case you missed it above, you've got to be sure Hard disks are turned on in Finder General Preferences under "Show these items on the Desktop"

Folders are disappearing from my desktop I am on 10.6.8

Folders disappeared from my desktop. All the files in a FileMaker Advanced 11 folder which was on my HD disappeared but the folder remained. Files that were on a backup server disappeared - first half, then a few days later the remaining files were gone. On a newly created backup, when folders were recovered from the backup they could not be copied. Duplicate folders had to be created and the files moved to them before they could be copied. Even though the original folders contained files, they showed 0 bytes. After the files were moved the new folder showed 720 KB.

You may find this thread helpful:
https://discussions.apple.com/message/19268163#19268163
but the desktop is not the proper place to keep files and folders:
Performance tip: Keep the Desktop clutter-free (empty, if possible)
Mac OS X's Desktop is the de facto location for downloaded files, and for many users, in-progress works that will either be organized later or deleted altogether. The desktop can also be gluttonous, however, becoming a catch-all for files that linger indefinitely.
Unfortunately - aside from the effect of disarray it creates - keeping dozens or hundreds of files on the Desktop can significantly degrade performance. Not necessarily because the system is sluggish with regard to rendering the icons on the desktop and storing them in memory persistently (which may be true in some cases), but more likely because keeping an excessive number of items on the Desktop can cause the windowserver process to generate reams of logfiles, which obviously draws resources away from other system tasks. Each of your icons on your desktop is stored as a window in the window server, not as an alias. The more you have stored, the more strain it puts on the window server. Check your desktop for unnecessary icons and clear them out.
Keeping as few items as possible on the Desktop can prove a surprisingly effective performance boon. Even creating a single folder on your Desktop and placing all current and future clutter inside, then logging out and back in can provide an immediately noticeable speed boost, particularly for the Finder.
And it is why Apple invented 'Stacks'.

Why does my external drive disappear from my desktop?

I am switching from PC to Mac. I have 2 externaldrives. Both have been formatted in FAT 32 by the MAC. When I plug them in the desktop and finder see them, then with both of them they have disappeared from the desktop and from finder. Still can be seen in disk utility and system profiler. How can I find them and why does this happen?

If you daisy chained then try without. May not be enough power to handle both at sme time. Other than that read some info:
1. Shut-down your Mac, and unplug the power cord
2. Turn the power off on your external FireWire devices
3. Unplug the FireWire devices from the Mac
4. Wait for 5 min.
5. Plug the power cord to your Mac only
6. For PPC Macs: Restart the Mac while holding the Option-Apple-O-F, and keep holding until you get the ">" prompt, then release the keys
7. At the ">" prompt type:
      reset-nvram and hit the Return key
      set-defaults and hit the Return key
      reset-all and hit the Return key
the last command will restart your mac
8. Shut down your Mac
9. Connect all your FireWire devices to the Mac and turn them on
10. Restart your Mac.
All your FireWire devices should reapear, if not repeat the procedure
How to avoid the issue :
The only really proven way to avoid burning up a FireWire port is to connect all devices and to turn them on PRIOR turning on the Mac. Likely, one must unplug them and turn them off AFTER the Mac has been turned off. If you need to connect another device, then you're on for a shutdown of your machine...  It's a tad annoying but it guarantees that the FW ports won't be damaged.  Be careful when using self powered devices such as webcams, iPods, hard drives or hubs, as they can destroy the port pretty easily. Another thing is to avoid daisy-chaining hard drives.
When the FW port doesn't respond anymore :
In this case, peripherals won't be mounted upon plugging, and won't be displayed in Apple's System Profiler. The self powered devices will still be fed by the port, but won't respond either.  It happens that the PHY just hangs after a surge or a random problem. Once hung, the port will not respond any longer, it is possible to reset the component by going through the following steps :
1° boot the PPC mac in Open Firmware by holding [ Apple key - Option - O - F ] after the startup chime.  2° you'll get to a command prompt. the keyboard mapping will be QWERTY, so pay attention when you type the following :  RESET-NVRAM (enter)  RESET-ALL (enter)  3° Now the mac should restart itself and the port should function properly again.  If it still doesn't work, then it means that the PHY is damaged.
http://www.hardmac.com/articles/16/
From Kappy post:
922 is only used in dual drive cases to provide a "build-in firmware RAID support"
912 or 912+ is FW800, the "+" means USB2
911 is FW400
924 adds eSATA support along with FW400/800
MacSales, OWC Tech Support library is where I would go first, as they do tend to have or links to, firmware updates for Oxford.
From Wiebetech:
I just upgraded my Mac OS, and now I'm having trouble with my FireWire device. What can I do?
A: With nearly every OS update Apple releases, some external drives are not recognized after the update. The typical symptom is that the device will not mount but the volume is visible and grayed out in Disk Utility. This means that the device is working properly, but the OS does not recognize the volume as mountable. Sometimes the drive does not show up at all.
The first thing to do is to see if repairing Permissions with Apple's Disk Utility First Aid feature solves the problem. If not, try repairing the disk with First Aid. Another possible solution is to zap the PRAM. This is done with a keyboard command while rebooting. Restart your computer and hold down the Command, Option, P and R keys. Consult the Apple web site for details.
If this does not work, then try pushing the PMMU reset button on the logic board. Consult the Apple web site for locations of the button for your Mac. If the drive still does not show up, shut down, disconnect all peripheral devices, and boot from the Mac OS Installation CD. The later the OS version, the better. Do not reinstall the OS, but when the Installer is loaded up and ready to begin, go to the File menu and use the Disk Utility program. Connect the drive that is having problems, then start the Disk Utility application. If you see the external drive and it is not grayed out, you know the drive is okay. Run Disk First Aid on it anyway. Then run it on your internal boot drive while you are at it. When done, unmount the external drive and UNPLUG it! Then restart the Mac.
When the Mac has restarted and is running on the internal boot drive, reconnect the external drive.

Disks disappear from my desktop even though they haven't been ejected

This started happening a couple of days ago... Randomly, whatever CD is in the drive will disappear from my desktop even though I haven't ejected the CD. The only way I've been able to get it to reappear is by ejecting the CD and then re-inserting it.
Solution?

Hi, I use Disctop:- http://mac.brothersoft.com/disctop-pro.html
I too have had this disappearing CD syndrome,,If it really worries you try the SMC route.
It could be a faulty CD Drive unit -> Call AppleHelp & ask their advice...L

My google has disappeared from my desktop

My google suddenly disappeared from my desktop and I cannot find it on my phone to reinstate. Any help with this would be greatly appreciated.

Hi..
Archive & Install > Installing Mac OS X 10.5 Leopard

Diagnostics: Agent disappearing from system landscape

Hello,
I want to monitor my Enterprise Portal (EP7) and use Root Cause Analysis for it.
I installed the SMD Agent on EP7, diagnostics is running on SolMan (SM7).
Now the strange part:
Whenever I start the Agent on EP7, I can see it for a short time in diagnostics (e.g. in the landscape management or in the managed system setup wizard).
But shortly after (between 30 - 60 sec.), the agent disappears from diagnostics. Although it is running all the time, it does not show up anymore.
Diagnostics says, the agent is not connected resp. does not found an agent. But it's up and running (and was visible just seconds before) on EP7.
Anybody any idea, why this behaviour occurs?
Thanks and Regards,
Jan

Hi,
We have used same SIDs (the default DAA) for a few hosts in our landscape and this did not cause a problem.
But in my opinion best to use DAA, DAB, DAC etc in order to remove any room for confusion for both the humans and the systems
Regards,
Srikishan

Files & Folders disappeared from the desktop!

I have a number of files and folders that just simply disappeared from my desktop. I have tried all of the "normal" recovery methods (restart, repair permissions, run Disk Warrrior and replace the directory, run Data Rescue II) but I find NOTHING!
I am totally baffled by this and cannot seem to find anyone who can give me an answer. HELP!
I was hoping the Apple board would have enough "experts" to help me find my missing data......

I have exactly the same problem, and I've already asked for some help on this boards but with no luck, and 10.4.9 didn't help, nor did the new bootcamp beta.
From what I understand this seems to happen only on Intel Macs that uses Bootcamp. When you boot back to OS X after using Windows, your desktop is like a black hole and everything you put in there just seems to disappear.
If you look for the missing file with Spotlight, it will find it, and if you click on it in the Spotlight window, the file will appear magically on your desktop.
So basically the files are there but the desktop is just not showing them.

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...

I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...tried xing out the red x, putting them in the trash...right clicking to make them disappear...nothing works...

Just got rid of them... I closed Quicktime and was asked to delete. So I deleted them. Problem solved.

Agent disappearing from Supervisor Desktop

Similar Messages

Maybe you are looking for