Agent install on dataguard database hosts

Hello All:
Is there a sequence i need to follow to install agents on the unix hosts that has primary and secondary databases(Datauard)?
This is my plan.
Install grid control on server A.
Install Management Agent on Server B (dataguard's Primary databases, this host has 2 primary databases ).
Discover the databases on Server B.
Install Management Agent on Server C (dataguard's Secondary databases, this host has 2 secondary databases ).
Discover the databases on Server C.
Are these sequence of installs correct?
Thanks for your help in advance.
Thanks
San~

The important thing is, first install grid control on server A. So that while installing agent on B,C you will not see any issue discovering the agent.
Other than that you no need to follow the sequence and your sequence works fine.
Hope this helps,
Regards
http://www.oracleracexpert.com
Click here to see [ IPC Send timeout issue and Solution.|http://www.oracleracexpert.com/2009/09/ora-29740-evicted-by-member-0-group.html]
Click here to [Download Oracle Grid Control and ASMLib and Install|http://www.oracleracexpert.com/2009/08/download-oracle-grid-control-and-asmlib.html]
Edited by: Satishbabu Gunukula on Dec 2, 2009 12:33 PM

Similar Messages

  • Updates fail to install because Microsoft Database Daemon and SyncServices Host fail to close.  Any help?

    Updates fail to install because Microsoft Database Daemon and SyncServices Host fail to close.  Any help?

    Ask on the Microsoft Mac forums since it's their product you're having trouble with.  these forums only provide support for Apple products
    http://answers.microsoft.com/en-us/mac

  • Installing EM12c: Installer can't find database host name....?

    Hello all,
    I'm trying to install EM12c. I'm near the last steps, alll requirements passed.
    I have a fresh install of 11.2.0.3 database on a second host, listening for connections.
    But the EM12c installer keeps error'ing out saying it cannot find the host name for the database server.
    I can ping that same server name (I've quadruple checked to make sure it is right)....I've cut from the installer and pasted into a ssh session both as root and oracle user on the target GRID/EM install server...it pings just fine.
    ON the database server, I've done tnsping..and it shows listener is up, I've entered valid ports and host name.
    ON the target EM server, I've even entered in the /etc/hosts file...the IP and server name....still to no avail.
    Any suggestions out there on what else to check? I have downloaded and using the latest EM12c install media...I downloaded it about 2x weeks ago...so, should be latest patched version.
    Thanks in advance,
    cayenne
    ps. Sorry...both EM and database server are on RHEL5 These are VMWare VMs....

    mnazim wrote:
    Please paste the listener status and paste the value that you have entered at database connection screen.Ok.
    I'm having to edit out the actual server and SID names, but they do match:
    [oracle@servername ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 03-MAY-2012 14:45:12
    Copyright (c) 1991, 2011, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
    Start Date 02-MAY-2012 19:05:49
    Uptime 0 days 19 hr. 39 min. 24 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/servername/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=servername.domain.name)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    Services Summary...
    Service "instance.domain.name" has 1 instance(s).
    Instance "instance", status READY, has 1 handler(s) for this service...
    Service "instanceXDB.domain.name" has 1 instance(s).
    Instance "instance", status READY, has 1 handler(s) for this service...
    The command completed successfully
    The connection info on the EM12c Installer screen,
    Database Host Name: servername.domain.name
    Port : 1521
    Service/SID: instance (Note, I've tried this with instance name simple and with FQDN attached, same error)
    SYS Password: *************
    Thank you,
    cayenne

  • Error (2931) VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.

    Experts,
    kindly advice for this error when create vm from a templates, while i'm not having this issue when create the vm to another host from the same templates,
    firewall is disabled and no antivirus on the host.
    The network and the ping is very stable, and the WS-Management service is running on the host,
    Host  : windows server 2012 R2
    VMM : 2012 R2 3.2.7895.0
    VMM updated from RU2 to RU5
    Error (2931)
    VMM is unable to complete the request. The connection to the VMM agent on the virtualization server (host.domain.local) was lost.
    Unknown error (0x80338029)
    Recommended Action
    Ensure that the Windows Remote Management (WS-Management) service and the VMM agent are installed and running and that a firewall is not blocking HTTPS traffic.
    This can also happen due to DNS issues. Try and see if the server (ms-lab-01.eccsolutions.local) is reachable over the network and can be looked up in DNS. You can ping the virtualization server from VMM management server and make sure that the
    IP address returned matches the IP address locally obtained from the virtualization server.
    If the error still persists, restart the virtualization server, and then try the operation again.
    Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010.

    Ok  I will try another template,
    and the drop happen in the customization after deploying the VHDX file as my first image.
    I had this answer from partner forum. but i didn't try it yet
    Backup your VMM database and then check the
    tbl_VMM_Lock table in the
    VMM database to see if it has any locks listed, do this after stopping the System Center Virtual Machine Manager Service.
    If there are locks listed in the tbl_VMM_Lock
    table you can clear them by executing the prc_VMM_ReleaseAllLocks
    stored procedure.
    Ahmad Samir | MCSE 2003, MCSE 2012 Private Cloud | MCTS: SCOM 2007, Lync 2010, Exchange 2010, Server Virtualization.

  • I can't get my website to connect to mysql database hosted on my yahoo site

    I used David Powers tutorials to build a CMS website in Dreamweaver using a testing site set up on my computer. I installed XAMPP and got it working on my computer. (I have a Windows 7 PC with Dreamweaver CS6)
    Now I have installed the mysql database on my remote site following the instructions in the help section of Yahoo Small Business, where my website is hosted. I recreated the same database on the myPHPAdmin on my remote site. (If I understood what I found out when searching for a solution, Yahoo doesn't allow me to see the database from Dreamweaver. It seems that I have to make sure the connections are correct and then upload my site to the remote server. Then it should work once up)
    Following the instructions I could find on Yahoo it seems that all I needed to do was make sure that the user name and password were the same as on my local computer and change the my Sql Server in the Server Connection in Dreamweaver CS6 to mysql instead of localhost, upload my website and it should connect. When I go to my webpage online I get "No database selected".
    I know html, css, some php, and mysql.
    I have been using Dreamweaver for approximatley 2 years and have created 2 successful websites for my husband, who is a photographer. He now wants to have a blog type news website and since I couldn't get Wordpress to do what he wanted to do I decided to create a CMS website. It works great on my computer, but now I need it to work on my remote site.
    I know it's probably something really stupid that I have overlooked and I would really appreciate any help I could get.
    I'm more than happy to learn whatever I need to learn to get this done. I have been searching all kinds of forums and I can find a lot of posts about this or a similar problem, but no solutions.
    Please let me know if I need to provide more information.

    I'm sorry, the way I wrote that was confusing. In mysql it suggested you create a new user that had limited access to access each database you created, rather than use the root user which had all permissions. So in both the mysql on my computer and the mysql on my website I created a user with the same username and password, so that when my website was on my remote server the username and password were the same as when I was testing it on my local computer.
    SnakEyez02 wrote:
    Following the instructions I could find on Yahoo it seems that all I needed to do was make sure that the user name and password were the same as on my local computer and change the my Sql Server in the Server Connection in Dreamweaver CS6 to mysql instead of localhost, upload my website and it should connect. When I go to my webpage online I get "No database selected".
    Just looking at that part of your response, I don't get what they are asking you.  Typically the remote host will require that you update the username/password and possibly SQL server.  When you are in most shared environments, which is what I presume you are in, you typically have a username that is prefix_username.  So you should be updating your script to match that information, not the other way around.  Also with the "mysql instead of localhost" comment, you would only change the script from localhost to another server (ip address) if the mySQL server is not on your web server.  If you host tells you this is true thent he value should be an IP address instead of localhost.  Is that the case?
    For the second part of your question in the "Why can't I access my database" help on Yahoo it says "If your PHP or Perl configuration files require a host name, you may have a problem with your host name. Make sure that you are using the host name mysql, not the default host name localhost." I assumed that meant that in the setup menu when establishing a server connection I needed to replace "localhost" as the mysql Server with "mysql" and then upload my website. This didn't work. Since the mysql server I am trying to access can be accessed using phpmyadmin at www.mywebsite.com/phpmyadmin this seemed to make sense to me. I think I might have managed to access the mysql server, but I'm not choosing the database I want correctly.

  • SCOM agent install fails Error 80070035 - the network path was not found

    I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
    Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
    So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
    The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
    I added a specific rule to allow TCP 5723 and 5724
    DCOM is enabled
    I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
    I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
    did install to) and the server has plenty of disk space available
    I am not sure what else to look at so would welcome any ideas
    Thanks

    Hi Petro,
    I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
    So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
    Also check if your agents have the WMI service started and enabled ?
    Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
    Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
    Component A
    Component B
    Minimum Requirement
    Root management server or management server
    Agent
    64 Kbps
    Root management server or management server
    Agentless
    1024 Kbps
    Root management server or management server
    Database
    256 Kbps
    Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
    Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
    Also post the event logs of the Agents which are in not monitored state for analysis.
    SCOM Agent installation failure error codes
    Error
    Error Code(s)
    Remediation Steps
    The MOM Server could not execute WMI Query "Select * from Win32_Environment where
    NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
    Operation: Agent Install
    Install account: domain\account
    Error Code: 80004005
    Error Description: Unspecified error
    80004005
    1.  Check the PATH environment variable.  If the PATH statement is very long, due to lots of installed third party software - this can
    fail.  Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
    2.  The cause
    could be corrupted Performance Counters on the target Agent.
    To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
    prompt. Press ENTER after each command.
    cd
    \windows\system32
    lodctr /R
    Note /R is uppercase.
    Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
    How to manually rebuild Performance Counter Library values
    http://support.microsoft.com/kb/300956
    3.  Manual agent install. 
    The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
    computer “servername.domain.com”
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 800706BA
    Error Description: The RPC server is unavailable.
    8004100A
    800706BA
    1.  Ensure agent push account has local admin rights
    2.  Firewall is blocking NetBIOS access
    3.  Inspect WMI health and rebuild repository if necessary
    4.  Firewall is blocking ICMP  (Live OneCare)
    5.  DNS incorrect
    The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
    Operation: Agent Install
    Install account: DomainName\User Account
    Error Code: 80070005
    Error Description: Access is denied.
    80070005
    80041002
    1.  Verify SCOM agent push account is in Local Administrators group on target computer.
    2.  On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
    Disable McAfee antivirus during push
    The MOM Server failed to open service control manager on computer "servername.domain.com".
    Therefore, the MOM Server cannot complete configuration of agent on the computer.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 800706BA
    Error Description: The RPC server is unavailable.
    800706BA
    1.  Firewall blocking NetBIOS ports
    2.  DNS resolution issue.  Make sure the agent can ping the MS by NetBIOS and FQDN.  Make sure the MS can ping the agent by NetBIOS
    and FQDN
    3.  Firewall blocking ICMP
    4.  RPC services stopped.
    The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
    on this computer, please retry the Push Agent operation after some time.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 80072971
    Error description: Unknown error 0x80072971
    80072971
    This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
    %windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
    When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
    of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
    if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
    the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
    http://support.microsoft.com/kb/934760/en-us
    The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
    agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
    Operation: Agent Install
    Remote Computer Name: servername.domain.com Install account: DOMAIN\account
    Error Code: C000296E
    Error Description: Unknown error 0xC000296E
    C000296E
    1.  Netlogon service is not running.  It must be set to auto/started
    The MOM Server detected that the following services on computer
    "winmgmt;(null)" are not running
    C000296E
    1.  WMI services not running or WMI corrupt
    The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
    required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: C0002976
    Error Description: Unknown error 0xC0002976
    C0002976
    1.  Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
    The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
    Install account: DOMAIN\account
    Error Code: 80070643
    Error Description: Fatal error during installation.
    Microsoft Installer Error Description:
    For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
    C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
    80070643
    1.  Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
    Call was canceled by the message filter
    80010002
    Install latest SP and retry. One server that failed did not have Service pack installed
    The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
    share exists.
    80070006
    1.  Manual agent install
    Possible locking on registry?
    http://www.sysadmintales.com/category/operations-manager/
    Try manual install.
    Verified share does not exist.
    The network path was not found.
    80070035
    1.  Manual agent install
    The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
    80070070
    1.  Free space on install disk
    The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
    80070079
    NSlookup failed on server. Possible DNS resolution issue.
    Try adding dnsname to dnssuffix search list.
    The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
    8007041D
    80070102
    NSlookup failed on server. Possible DNS resolution issue.
    Verify domain is in suffix search list on management servers.
    The Agent Management Operation Agent Install failed for remote computer "name"
    80070643
    1.  Ensure automatic updates service is started
    2.  Rebuild WMI repository
    3.  DNS resolution issue
    The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
    80070652
    Verify not in pending management. If yes, remove and then attempt installation again.
    The MOM Server detected that computer "name" has an unsupported operating system or service pack version
    80072977
    Install latest SP and verify you are installing to Windows system.
    Not discovered
    Agent machine is not a member of domain
    Ping fails
    1.  Server is down
    2.  Server is blocked by firewall
    3.  DNS resolving to wrong IP.
    Fail to resolve machine
    1.  DNS issue
    The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
    8007046A
    1.  This is typically a memory error caused by the remote OS that the agent is being installed on.
    There are currently no logon servers available to service the logon request.
    8007051F
    1.  Possible DNS issue
    This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
    of the Windows Installer service.
    8007064D
    1.  Install Windows Installer 3.1
    The network address is invalid
    800706AB
    Possible DNS name resolution issue.
    Tried nslookup on server name and did not get response.
    Verify domain is in suffix search list on management servers.
    The MOM Server failed to perform specified operation on computer servername.domain.com
    80070040
    1.  Ensure agent push account has local admin rights
    The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
    80072979
    1.  Correct DNS/WINS issue.
    2.  Try pushing to NetBIOS name
    Gautam.75801

  • Oracle 9i database software upgrade issue with standby (Dataguard) database

    All,
    I have encountered a problem in upgrading the Oracle software on 2 of our databases in-house. The databases in question here are using Dataguard, so one is set to primary and one is set to standby. The version that they are/were starting at is 9.2.0.7.
    I was able to install and complete the 9.2.0.8 and 9.2.0.8 OCT CPU patches on the primary database, however when I moved to working on the standby database, I am got an error when attempting to follow step 6 of the post installation tasks:
    Enter the following SQL*Plus commands:
    SQL> STARTUP MIGRATE
    SQL> SPOOL patch.log
    SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
    SQL> SPOOL OFF
    (Please note that this is my first experience with working with Dataguard, so my methods in updating might have been a bit off-base.)
    If I attempt to startup the standby database in MIGRADE mode, I get the following error (which is expected):
    ORA-01666: controlfile is for a standby database
    If I try to run the catpatch.sql script, even after mounting the database in standby mode, I receive the additional error:
    ORA-01219: database not open: queries allowed on fixed tables/views only
    My question here is, how do I get the standby database to allow me to finish the software upgrade process, so that both versions of Oracle match on the primary and standby databases? :)
    (I did try some research on Metalink, but only found an article detailing how to upgrade your dataguard database from 9i to 10g, which did not look especially helpful in this case...)
    Thank you!
    -Sabrina

    Depending on the kind of Dataguard you currently have, physical or logical, there are two useful metalinks notes:
    Upgrading to 10g with a Physical Standby in Place
         Doc ID:      Note:278521.1
    Upgrading to 10g with a Logical Standby in Place
         Doc ID:      Note:278108.1
    ~ Madrid
    http://hrivera99.blogspot.com/

  • ZLM Agent Install Fails - NOTHING_PROVIDES_DEP:

    Hi,
    I am trying to install the zlm agent (ZLM 7.3 IR2) on a SLES 11 box.
    I have extracted the ZLM Server ISO image files, and put it on an NFS server. The client box then mounts the NFS share and I run the command
    ./zlm-install -a -i
    Sometimes the installation goes through fine, but lately I am getting the following errors on the agent install
    Installing Component : ZENworks Agent
    Installing ZENworks Agent | | 0% NOTHING_PROVIDES_DEP: /bin/sh needed by rug-7.3.2.0-0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-utilities-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-install-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-zmd-settings-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: libxml2 needed by novell-zenworks-zmd-rmagent-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policymanager-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policyenforcers-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-x11vnc-0.6.1-2.novell.0.8.i586
    NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-tightvnc-1.2.9-6.novell.0.7.i586
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zislnx-7.3.2-0.0.0.i586
    NOTHING_PROVIDES_DEP: libc.so.6()(64bit) needed by zmd-inventory-7.3.2.0-0.0.x86_64
    NOTHING_PROVIDES_DEP: 'gconf2 >= 2.2.1' needed by novell-zenworks-zmd-gconfpolicyenforcers-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by zen-updater-7.3.2-0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zlm-release2-7.3.2-0.0.0.noarch
    DEP_PROVIDERS_NOT_INSTALLABLE: 'novell-zenworks-zislnx >= 7.0.0' needed by novell-zenworks-zmd-imgagent-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
    Install of ZENworks Agent failed.
    Install has not completed
    Here is the output from the log file
    26 Mar 2010 13:08:43 INFO Daemon Received signal SIGTERM
    26 Mar 2010 13:08:43 WARN ShutdownManager Preparing to shut down...
    26 Mar 2010 13:08:43 INFO UnixWebServer Unix server stopped
    26 Mar 2010 13:08:44 WARN ShutdownManager Shutting down daemon...
    26 Mar 2010 13:08:44 INFO Daemon Final RSS size is 25708 KB
    26 Mar 2010 13:08:51 INFO Daemon Starting ZMD version 7.3.2
    26 Mar 2010 13:08:51 INFO Daemon Using Mono 1.2.6
    26 Mar 2010 13:08:51 INFO WebCache Expiring cached files...
    26 Mar 2010 13:08:51 INFO KeyManager Loading key whitelist
    26 Mar 2010 13:08:51 INFO Daemon Loading trusted certificates...
    26 Mar 2010 13:08:51 WARN NetworkManagerModule Failed to connect to NetworkManager
    26 Mar 2010 13:08:51 INFO PackageManagementModule Using SAT backend
    26 Mar 2010 13:08:51 INFO RPMBackend Loading installed packages
    26 Mar 2010 13:08:51 INFO RPMBackend Finished loading installed packages
    26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'NetworkManager' - 'NetworkManager support'
    26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'Package Management' - 'Package Management module for Linux'
    26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'ZENworks Server' - 'SOAP methods used by a ZENworks server'
    26 Mar 2010 13:08:51 INFO ModuleLoader Loaded 'XML-RPC interface' - 'Export ZMD public interfaces over XML-RPC'
    26 Mar 2010 13:08:51 INFO ServiceManager Not loading existing services
    26 Mar 2010 13:08:51 WARN Daemon Not starting remote web server
    26 Mar 2010 13:08:51 INFO UnixWebServer Unix server listening for connections.
    26 Mar 2010 13:08:51 INFO DaemonHealth Current RSS size is 18740 KB
    26 Mar 2010 13:09:01 INFO ServiceManager Adding service: file:///mnt/data/packages/edir/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'edir'
    26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/imaging/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'imaging'
    26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/server/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'server'
    26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/mono/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'mono'
    26 Mar 2010 13:09:02 INFO ServiceManager Adding service: file:///mnt/data/packages/java/sles-11-x86_64
    26 Mar 2010 13:09:02 INFO ServiceManager Successfully added service 'java'
    26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/sles-11-x86_64/sles-11-x86_64
    26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'sles-11-x86_64'
    26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/runtime-deps/sles-11-x86_64
    26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'runtime-deps'
    26 Mar 2010 13:09:03 INFO ServiceManager Adding service: file:///mnt/data/packages/client/sles-11-x86_64
    26 Mar 2010 13:09:03 INFO ServiceManager Successfully added service 'client'
    26 Mar 2010 13:09:07 INFO Progress Progress.Stop Message: NOTHING_PROVIDES_DEP: /bin/sh needed by rug-7.3.2.0-0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-utilities-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-install-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/bash needed by novell-zenworks-zmd-settings-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: libxml2 needed by novell-zenworks-zmd-rmagent-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policymanager-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-policyenforcers-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-x11vnc-0.6.1-2.novell.0.8.i586
    NOTHING_PROVIDES_DEP: libc.so.6 needed by novell-zenworks-tightvnc-1.2.9-6.novell.0.7.i586
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zislnx-7.3.2-0.0.0.i586
    NOTHING_PROVIDES_DEP: libc.so.6()(64bit) needed by zmd-inventory-7.3.2.0-0.0.x86_64
    NOTHING_PROVIDES_DEP: 'gconf2 >= 2.2.1' needed by novell-zenworks-zmd-gconfpolicyenforcers-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by zen-updater-7.3.2-0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zlm-release2-7.3.2-0.0.0.noarch
    DEP_PROVIDERS_NOT_INSTALLABLE: 'novell-zenworks-zislnx >= 7.0.0' needed by novell-zenworks-zmd-imgagent-7.3.2-0.0.0.x86_64
    NOTHING_PROVIDES_DEP: /bin/sh needed by novell-zenworks-zmd-tess-7.3.2-0.0.0.x86_64
    Those packages deps are installed and I have a SLES 11 repo setup - which works.
    Thanks.

    Hi Rainer,
    Thanks for the response.
    I tried what you said:
    rpm -q --whatprovides /bin/sh
    bash-3.2-147.3
    Including the rebuild, but it didn't work.
    I doubt its an RPM problem, because I can install any other package.
    host-10-121-92-73:/mnt/agent # rpm -aq | grep squid
    yast2-squid-2.17.10-1.32
    host-10-121-92-73:/mnt/agent # zypper in squid
    Loading repository data...
    Reading installed packages...
    Resolving package dependencies...
    The following NEW package is going to be installed:
    squid
    Overall download size: 1.3 M. After the operation, additional 4.4 M will be used.
    Continue? [YES/no]: yes
    Retrieving package squid-2.7.STABLE5-2.3.x86_64 (1/1), 1.3 M (4.4 M unpacked)
    Installing: squid-2.7.STABLE5-2.3 [done]
    Additional rpm output:
    Updating etc/sysconfig/squid...
    host-10-121-92-73:/mnt/agent # rpm -aq | grep squid
    yast2-squid-2.17.10-1.32
    squid-2.7.STABLE5-2.3
    While I was writing this, I tried to install the agent again after that squid rpm install and it appears to be working now.
    It looks like the rebuild didn't do the trick, but install any new RPM sorts it out.
    Thank you very much for the help.

  • Cannot connect to database host...

    Hello,
    First, I want to say i'm not so good in english that's why i'm apologies for this.
    I try to use Sun VDI, my computer doesn't work in 64 bits that's why i use this product in 32 bits so I'm in a product envionnement.
    I've installed A mysql 5 server in a 2003 server with php, phpmyadmin to see database, and when i install sun vdi in my solaris 10 i have this error message:
    Cannot connect to database host...ip:3306 as user root, but when i've install mysql i've just root for user and i use this he work, and i use this login to connect in my database.
    What can Have to do now? My port is really 3306 when i install mysql and the two machine is in the same network, ping work.
    Thanks for yours futur answers
    Regards,

    Select (1/2/0) : 1
    Specify an administrator password: (in my case) xxxxxxxx _(password of my sql)_ <------ This is wrong. This can be any desired admin password.
    specify a cluster signature: 7727kkkk
    again
    you can only connect to a remote MYSQL database in a 32-bit system.
    Continue? (y/n): y
    Enter the dns name of mysql server: _192.168.168.165_ <------- This is wrong. This is an IP address and not a DNS name (not sure if that is really a problem here).
    Enter the port of mysql server : 3306
    enter mysql priviliged administrator: root_ <------- This is wrong. Here you have to enter the admin user name of your database.
    enter mysql priviliged administrator password: xxxxxxxx_ <------- Here you enter the corresponding password for this user (so password of your MySQL account)
    Do you want to use a Socket secure layer (ssl) connection for '192.168.168.165'? (yn): n
    Cannot connect to database host 192.168.168.x:3306 as user 'root'
    Please make you shure connexion daitels you have provided are correct
    Where i have wrong please?

  • DPM 2012 Manual Agent Install Fails

    Hello Everyone,
    Using DPM 2012 SP1, I've been stuck on an issue for some time now in trying to get a DPM agent install accomplished on a certain server. The DPM server resides on a parent domain and the server that I am having an issue with is on a child domain. Other servers
    on the child domain have installed the agent without issue when doing it manually.
    Here is the command I use (as an administrator):
    net use X: \\DPMSERVERNAME.parentdomain.com\c$ 
    cd /d X:\Program Files\Microsoft System Center 2012\DPM\DPM\agents\RA\4.1.3465.0\amd64\1033
    DPMAgentInstaller_KB2991995_AMD64.exe dpmservername.parentdomain.com
    The installation proceeds through the Microsoft License Terms, begins to install and then backs out. The error message that is generated states: "DPMAgentinstaller failed with error code = 0X80070643 error says: fatal error during installation"
    In researching the 1708 error within the log file it lead me to the fact that maybe the firewall on the target server was the issue. I
    ran this suggested fix on the target server:
    netsh advfirewall firewall set rule group=\"@FirewallAPI.dll,-29502\" new enable=yes
    netsh advfirewall firewall set rule group=\"@FirewallAPI.dll,-34251\" new enable=yes
    netsh advfirewall firewall add rule name=dpmra dir=in program=\"%PROGRAMFILES%\\Microsoft Data Protection Manager\\DPM\\bin\\DPMRA.exe\" profile=Any action=allow
    netsh advfirewall firewall add rule name=DPMRA_DCOM_135 dir=in action=allow  protocol=TCP localport=135 profile=Any
    The issue still persists.
    The MSDPMAgentinstall log file says the following at the end:
    Property©: Date = 1/7/2015
    Property©: MsiNetAssemblySupport = 4.0.30319.18408
    Property©: MsiWin32AssemblySupport = 6.1.7601.17514
    Property©: MsiRunningElevated = 1
    Property©: Privileged = 1
    Property©: USERNAME = Windows User
    Property©: DATABASE = c:\b1e38ee30069ed00e510\DPMRA.msi
    Property©: OriginalDatabase = c:\b1e38ee30069ed00e510\DPMRA.msi
    Property©: SOURCEDIR = c:\b1e38ee30069ed00e510\
    Property©: VersionHandler = 5.00
    Property©: ROOTDRIVE = c:\
    Property©: EXECUTEACTION = INSTALL
    Property©: ACTION = INSTALL
    Property©: UILevel = 5
    Property©: CostingComplete = 0
    Property©: OutOfDiskSpace = 0
    Property©: OutOfNoRbDiskSpace = 0
    Property©: PrimaryVolumeSpaceAvailable = 0
    Property©: PrimaryVolumeSpaceRequired = 0
    Property©: PrimaryVolumeSpaceRemaining = 0
    MSI © (68:E8) [09:38:14:119]: Note: 1: 1708 
    MSI © (68:E8) [09:38:14:119]: Note: 1: 2205 2:  3: Error 
    MSI © (68:E8) [09:38:14:119]: Note: 1: 2228 2:  3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1708 
    MSI © (68:E8) [09:38:14:119]: Note: 1: 2205 2:  3: Error 
    MSI © (68:E8) [09:38:14:119]: Note: 1: 2228 2:  3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709 
    MSI © (68:E8) [09:38:14:119]: 吰瞒
    MSI © (68:E8) [09:38:14:119]: 吰瞒
    MSI © (68:E8) [09:38:14:119]: Grabbed execution mutex.
    MSI © (68:E8) [09:38:14:119]: Cleaning up uninstalled install packages, if any exist
    MSI © (68:E8) [09:38:14:119]: MainEngineThread is returning 1603
    === Verbose logging stopped: 1/7/2015  9:38:14 ===
    Any ideas where to turn next?

    I do not have a Program Files\Microsoft System Center 2012\DPM\DPM\ProductionAgents\RA\4.1.3313.0\amd64
    file path on the DPm system.
    Rather Program Files\Microsoft System Center 2012\DPM\DPM\ProtectionAgents\RA\4.1.3313.0\amd64
    Still, I ran the DPMAgentInstaller_x64.exe
    from that file path and the agent did not install.
    Also, on the DPM server I have added the target machine name to the DPMRADmTrustedMachines
    group. I also made sure that the domain service account is in the same group. Still no luck.

  • TimesTen on the Database Host

    I have reviewed the documentation and usually see Oracle 11g TimesTen (IMDB) Cache as part of the "Middle Tier".
    Can Oracle 11g TimesTen (IMDB) Cache and the Oracle 11g Database be installed on the same host?
    I have extra real memory on the host that runs the Oracle 11g Database and want to take advantage on IMDB Cache.
    What is the reasoning behind running IMDB Cache on the "Middle Tier".

    It is technically possible to install and run TimesTen on the same host as oracle Db but this is not a recommended configuration because:
    1. Unless the Oracle/TT server has adequate hardware (CPU/Memory/Storage) and has been very carefully setup you are likely to get competition for memory, CPU and disk I/O resources between TimesTen and Oracle DB which will nnegatively impact the performance of both.
    2. TimesTen delivers best performance when it is co-located with the application logic that is accessing it. When the application and TimesTen are on the same machine the appplication can use 'direct connection' mode which eliminates all IPC (even local IPC) from the app <-> TimesTen communication resulting in very efficient and low latncy communication between the app and TimesTen. When TimesTen is on the same server as oracle all interactions with TimesTen still incur a network roundtrip which is very expensive compared to typical SQL execution times in TimesTen.
    So yes you can do it but in most cases it is a bad idea and won't deliver anything like the benefits you would getif you put TimesTen in the middle tier.
    Chris

  • Could Audit Vault Agent Support Multiple Source Database?

    Hello,
    May I use one agent for two or more source database?
    Thank you!
    Best Regards,
    Tony

    I had the same error, On the OUI log there was an error on the instalation of the Database Vault (although the installation finished OK), check if you have the same error output:
    <LOG>
    MANAGE_INSTANCE start RDBMS result=C:\oracle\product\10.2.2\av_1\bin\dvca_start_rdbms.bat,1,
    Executing task SQLPLUS_CATMAC
    connect SYS:java.sql.SQLException: ORA-01031: insufficient privileges
    Executing task UNLOCK_DVSYS
    Error executing task UNLOCK_DVSYS:java.lang.NullPointerException
    Executing task LOAD_NLS_FILES
    Error executing task LOAD_NLS_FILES:java.lang.NullPointerException
    Executing task ACCOUNT_CREATE_OWNER
    Error executing task ACCOUNT_CREATE_OWNER:java.lang.NullPointerException
    Executing task GRANT_CONNECT_OWNER
    Error executing task GRANT_CONNECT_OWNER:java.lang.NullPointerException
    Executing task GRANT_ADMIN_DB_TRIG
    Error executing task GRANT_ADMIN_DB_TRIG:java.lang.NullPointerException
    Executing task GRANT_ALTER_ANY_TRIG
    Error executing task GRANT_ALTER_ANY_TRIG:java.lang.NullPointerException
    Executing task ACCOUNT_CREATE_MANAGER
    Error executing task ACCOUNT_CREATE_MANAGER:java.lang.NullPointerException
    Executing task GRANT_CONNECT_MANAGER
    Error executing task GRANT_CONNECT_MANAGER:java.lang.NullPointerException
    Executing task PASSWORD_CHANGE_DVSYS
    Error executing task PASSWORD_CHANGE_DVSYS:java.lang.NullPointerException
    Executing task PASSWORD_CHANGE_DVF
    Error executing task PASSWORD_CHANGE_DVF:java.lang.NullPointerException
    Unable to login to SYS account.. java.sql.SQLException: ORA-01031: insufficient privileges
    . Error during post-installation processing. java.lang.NullPointerException. Error during post-installation processing. java.lang.NullPointerException.
    </LOG>
    Looks like the problem was that I changed sys and system password on the dbca final windows, that maybe wronged the instalation scripts.
    When re-installed the AV Server I just press ok on that window without changing any password and it worked.
    Hope that Helps.
    Alfonso Leon

  • Multiple OEM agents installed

    Good morning all,
    Our test database is a single node db in Sun Microsystems Inc. (SunOS 5.10). The database version is 10.2.0.4. We have an oem agent (10.2.0.4) installed in this db server communicate with a 10g grid control. Everything is working fine. Now we are trying to migrate this db server under 11g grid control. So what we did is installing new version of agent (10.2.0.5) into a different directory and configure this agent to talk to 11g grid control. So basically we have two agents installed in this db server. One is 10.2.0.4 agent which is talking to 10g grid control and another agent 10.2.0.5 which is talking with 11g grid control. Although both agents are running but we experience some issues: First, we noticed that all listeners in the server are in “Status Pending” in 11g grid control but actually all listeners are up. Second, a notification rule has been setup in 11g grid control to monitor one db instance and I purposely set the threshold very low so I can receive the alert email. But the all the alert emails actually comes from 10g grid instead of 11g where I set threshold very low. I am not sure how agent works internally so I am not sure if multiple agents will ever be work in one db server. Does anybody have any thoughts on this? Any insights to share?
    Greatly appreciate your help!
    Shirley

    Hi,
    You not there are most of the things about a target which are stored locally on the target rather than on the GC itself. For example, if you set t matrix value for a database target, it is stored on the database itself whether you use 10g or 11g GC . Here in your case, i think your both GC are fighting together to monitor a single target which is configured on both and i think it will not be supported (you can confirm from MOS). So my advise will be to configure your targets with only one GC (either 10g or 11g)
    Salman

  • Installing CE on same host  where EP7 is already installed.

    Hi,
    I am new to CE.
    we have a EP7 SP 18  (Single Stack-->Java )system installed and it is runnig fine.
    Now i want to install Netweaver CE 7.1 on the same Box.
    Is it possible and advisible ?
    if any one has done this please share your thoughts/Experince.
    Also if we can use the same Database for both installations or we have to have separate Database
    also ?
    Regards
    Rajendra

    Hi ,
            You can install CE on same host  where EP7 is already installed .I dont think it going to make any diffrence other than listener.So you can choose the different listener port during installation of CE .
             Its never recomended to use same database for different systems.Its going to increase your administrative effort if you will use same DB .Anyways when you install CE in that case it will install its own database .
          Hope this will clarify your doubt.
    Thanks..
    Mohit

  • Should the owb severside components be installed on the same host as DB be?

    Hi, all. I have installed the Oracle9i Database on a linux machine. If I wanna to use OWB to build warehouse, should I install the owb server-side components on the same machine as where Oracle9i Database locates on? Thanks

    thanks, Gilles Pol
    The owb has been setup on the linux host
    thank you very much

Maybe you are looking for

  • 10.4.10 update, spinning beachball isssues

    Hi there, I had a seeminly successfull upgrade, through software update, but now anytime I go near my airport icon I get the spinning beach ball, needless to say i cannot connect to the internet. Anytime I do network configuration, or diagnostics I g

  • How to calculate and update value of the field2 based on what user enters i

    I have a field1 (date type) in page1, while saving this value to the table, I also need to update other field (field2) based on field1 on the same table. (for ex. field2 is 60 days greater than field1). Also on next page I want to display field2 as r

  • Time for another update please

    I've tried sending this twice before. It doesn't appear in the forum and I get no NDR. I wonder what's up. From: Firedog Date: 17 June 2009 09:49 To: [email protected] Subject: Re: Re: Time for another update please > Jochem: 2. Progress on the prope

  • Does Surface Pen Work on any windows 8 touch screen enabled devices?

    i have a acer aspire with a touch screen monitor and I was just wondering if the surface pen will work on it. (It runs windows 8) 

  • Where do I go to remove email address suggestions when posting?

    in email when you type the first letter for the person you are sending, it gives you choices of what matches it. I see old addresses that I would like to delete and not have them keep popping back up. Where is that kept?