Agent is not visible in Cisco Supervisor Desk Top

Agent is not visible in Cisco Supervisor Desk Top
Problem Details: UCCX 5.0(2)SR02_Build045
CUCU 6.1.4
For some reason I can not get one of my agents to show up in Cisco Supervisor Desk Top
I have never had a problem like this before. I configured this phone and agent just like
all the others. The following is a list of items I have checked and double-checked.
CM user and Password
ICD One Button Logon
UCCX, Teams, Resources and Q’s
IPCC directory number
RMCM App User Association
Skills
Deleted user and re added user
I also did the following:
From my PC telnet to UCCX Server port 5900, Successful
From my Server telnet to my phone xxx.xxx.xxx.xxx 59021 and 59020 not successful
My phone and agent work fine.
I shut off my virus protection and had the same results
Most of the PC’s and phones in my environment had separate Ethernet ports and they show up just fine in the Cisco Supervisor Desk Top
Does anyone have any experience with this? Thanks, Tom

Hello Tom,
In this case what you should try to telnet into that specific port is the Agents PC where the CAD software is running, this ports are use by the UCCX for the chat service. this service is the one that handles not oly the chat feature between the agents but also the agent status in the suppervisor desktop.
Please follow this document, and test again the connectivity.
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008035309f.shtml
Another important detail to check is if the Agents Pc has the Windows Firewall running or any anti virus software that could block the ports as well
HTH
Please rate this post if was helpful
Walter Solano
CCNA Voice
Cisco UCCX Specialist

Similar Messages

Agents don't appear in Cisco Supervisor Desktop (CCX 7.01 SR5)

Hi all,
I have a problem with CSD and CAD applications. My problem is although we have an agent logged into the CAD, I cannot see it from th Cisco Supervisor Desktop. I have reviewed the connectivity between Cisco Agent Desktop machine and CCX Server and from Cisco Supervisor Desktop and CCX Server (performing telnets between machines).
With this issue I cannot monitor agent states neither perform agent monitorization.
I have installed Cisco Security Agent 5.02 on both CCX Servers.
It's important for me to solve it, so any help will be appeciated.
Regards

This has been identified as a known issue documented under Cisco Bug ID: CSCtd75811. This problem is the same as that documented in CSCtd07195 for CAD Enterprise. http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd75811 (Registration required).
There is no known work-around and the fix is "Release Pending" and has been so for about a month.
Tim

I have Lightroom 4 and purchased CC but 5 will not show up on my desk top when I download it!

I cannot get Lightroom 5 to download from CC what am I doing wrong?

Please provide details about your operating system and what have you done that is not working. All you have said is you have downloaded it. The it you are referring to is that Lightroom 5 downloaded through your Creative Cloud Application manager? Did you run the installation package after downloading it? If so what happen did it run to completion but did not put an icon on your desktop? Or did the install fail, if so what error message was displayed.

IPhoto will not stay open on my Desk top when I click on dock icon?

Hi!
Can anyone tell me why iPhoto will not stay open, and keeps closing into "Applications" file that, incidentally IS also situated on the dock as well?
This is probably an easy answer..but, I just cannot figure it out!
Thanks!
Marilyn

and keeps closing into "Applications" file that, incidentally IS also situated on the dock as well?
Iphoto is an application and so is installed in your Applications folder. The icon on the Dock is a shortcut to the application in the Applications Folder. It's not the app, just a shortcut.
Describe what happens when you launch iphoto?

External Hard Drive is Not Showing Up on Desk top?

My external hard drive is not showing up on my desk top any more. When I tried to reconnect it I get the follow message.
You have inserted a disk containing no volumes that Mac OS X can read. To use the unreadable volumes, click Initialize.
Help what should I do? I have 50 GB of music on it and it's never had this problem before.
Thanks
Jeremy

Norton has a bad reputation because they have not kept up with changes in the Mac file structure. Norton version 8 is the one you should be using, if you choose to use it. Earlier versions will likely damage your directory, possibly beyond repair by other utilities.
Any time you use any Disk Repair Utility, it is somewhat of a crap shoot. It may or may not be able to make the repair, and you may or may not lose a few to very many files in the process. The program best respected in this arena is Disk Warrior. If you choose to buy it, pay very close attention to which version you are buying, as the latest version CD (intended to boot 10.3 or 10.4) may not boot on your Mac.

DVDSP burn works on computer NOT desk top player

I'm using DVDSP 2.0
When I burn a disk it works on my computer but not on a relatively new desk top player. Is this a media problem? I've had some probs before with media but have been using Maxell DVD-R that has worked in previous projects. Any media suggestions?
Or any other suggestions for that matter.
Would an external burner and Toast give me a more consistent burn?
Thanks
Powerbook G4 Mac OS X (10.2.x)

What media are you using?
What is your maximum and average bit rate for what length in minutes video?
What are your Dolby 2 audio encode settings?

Where to find desk top icons for firefox, not short cuts, icons

I do not like the blue world desk top icon for Nightly and I would to use the other desk top icon with the fox curled inside the blue world. Please send me the icon, not the short cut. Thanks !

Sounds like a question for a Windows 7 support forum. I don't use Win7, but in WinXP if you right-click a desktop icon and open Properties, there is a button for '''Change Icon'''. As finitarry alluded to, you will need to come up with your own icon file of the correct size. Keep in mind that Nightly updates frequently, actually it updates '''''nightly''''', and you may find that you need to replace that icon every day. ''Speculation on my part, I have never wasted my time replacing a desktop shortcut icon for a program that updated frequently. And if you spent any time searching for how to do that specifically for Firefox, anything you might have found about fiddling Firefox program files or the Firefox Profile folder hasn't worked since the Firefox 3.0 version.''

Desk Top Access

all of my desk top icons are gone and when i tyr to access, error message say that i do not have permission to access desk top??

Hello Eddie.
That's a shame, I thought repairing permissions would be sufficient. It could well be a faulty desktop preference file that's causing all the bother.
Go to Finder and open a new window, then click on the home icon (your name) in the column on the left, click on Library, then Preferences and approx a third of the way down will be: com.apple.desktop.plist
Drag it onto the desktop and see if everything is hunky dory, if so drag it to the trash and wave it goodbye. If that hasn't fixed it, yikes! I'm stumped. There's some really knowledgeable people on these forums though, so if it doesn't solve the problem I'm confident they'll know what to do.
Good luck,
Lou.

UCCX 8.5.1 - Cisco Supervisor Desktop not showing Caller Names

Hello,
I have recently done a deployement for UCCX 8.5.1. I have been made aware of an issue where iif a Cisco Supervisor Desktop is looking at a Agent that is on a call, the Callers name is not bening shown in the Caler Name field, instead the callers extension is being displayed. Has anyone else experienced this or is this one for TAC?
Here is an example of what I mean.
This is the view on the UCCX Supervisor screen when an agent is taking a service desk call. How can we configure it to display the name alongside the number? I know that 1380 is Paul A Smith, and 1552 is Nicola Turvill?
Thanks for your time.

Check the troubleshooting guide.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/troubleshooting/guide/cad85ccxtg-cm.pdf
Page 126
Problem
Enterprise data does not display data on outbound calls.
Solution Enterprise data only displays data for inbound calls.

User is in team state but not in team summary - Cisco supervisor desktop

We have Cisco supervisor desktop where supervisor can see user in team state but not in team summary?? Any clue why is could be happening??
Any help is much appreciated
Thanks!

Hi David,
Not sure of setting an alert but Supervisor can use "Table 17. Summary display data"
Agents Not Ready : The number of agents in this CSQ who are currently in the Not Ready state.
And "Table 12. Team Summary display data (cont’d)"
Max Not Ready : The longest time the agent spent in the Not Ready state today.
And also refer the section "Creating Supervisor Work Flows"
Using the Supervisor Work Flow Administrator feature, you can configure your desktop to perform certain actions based on queue statistics for calls waiting and calls in queue for specified skill groups.
Refer the below link for more information on this.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/csd85ccxug-cm.pdf
Hope it helps.
Anand
Pls rate helpful posts !!

Cisco Supervisor user isnt under Agent's Team Summary

I am using Cisco Supervisor and Agent Robin Dean is under Agent Team State but she is not under Agent-Team Summary. Does anyone know how to get her in there? We are using UCCX 8.0.2.

There have been quite a few bugs over the years with agents not showing or disappearing from the supervisors desktop.
Make sure you have the latest SU installed, I think SU4 for 8.0(2)
Graham

ERMS work items not visible in IC Web Client Agent Inbox

We have configured ERMS rule modeler with a routing to an organisation unit if email content contains a specific word.
ERMS seems to work fine as workflow is triggered and work items created in the relevant user SAP inbox (any user assigned to the organisation unit used in ERMS routing.
When I log into the IC Web client and check for email items in the Agent Inbox, the emails are not visible!!!
Has anybody faced a similar issue?

Hi Manoj,
Have you look at this configuration in SPRO
->Agent Inbox ->Setting for Asynchronous Inbound Processing -><b>Define Receving Emails/Fax settings</b> inthis Set Comm.method as <b>INT</b> i.e E-Mail.
Pls check this config and get back me..
Regards
Raju

Agent Assinment is not visible in another client

Hello All,
I assigned some agents (Users) for one customized standard task in my golden client(200). But its not visible in Testing client (220). Did i missed something? I changed attrbutes to standard task. I made client copy also.. I searched in forum..i could not found relevant information..
Thanks in advance..
Regards,
Krishna.

Try to use the RE_RHMOVE30 by using this transaction you can port the agent assignment to the other system.
try like this
1. Execute the TXn.
2. Specify the Plan version as 01.
3. Specify the Object ID as TS.
4. Sepcify the Object key as <8 digit template number>.
5. uncheck the check boxes Test and with Lock under the section transport on the selection-screen.
5. Enable the checkbox Transport and clcik F8.
6. select the entry and click on the button Transport. Now again select the same entry and check the check box transport and this time click on the button Tranpost and Delete this time it will ask you for CUstomizing request. save it. and do a client copy .
this time all teh agent assignments are copied to the other system.

After EM agent installation, only database is not visible in EM Grid Contro

Dear All,
I am using Oracle 10g2 database. I have a problem with EM agent configuration. After installation the database (SID=BITEX) is not visible in the EM Grid Control, which is installed on the other host. Listener, ASM and host are visible and show actual state, only database instance is missing . Below, I attached some output from the listener, agent and targets.xml
Thanks fro any advice
Groxy
Output from "lnsnctrl status":
oracle@bitex2:~/product/10.2/db_1/bin> lsnrctl status
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-DEC-2007 14:33:35
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bitex2.bitex.com.pl)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.2.0 - Production
Start Date 05-DEC-2007 14:17:14
Uptime 0 days 0 hr. 16 min. 21 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/product/10.2/db_1/network/admin/listener.ora
Listener Log File /opt/oracle/product/10.2/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=bitex2.bitex.com.pl)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM", status BLOCKED, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "BITEX.WORLD" has 1 instance(s).
Instance " BITEX ", status READY, has 1 handler(s) for this service...
Service " BITEXXDB.WORLD" has 1 instance(s).
Instance "SA BITEX NEX", status READY, has 1 handler(s) for this service...
Service " BITEX _XPT.WORLD" has 1 instance(s).
Instance " BITEX ", status READY, has 1 handler(s) for this service...
The command completed successfully
oracle@ bitex2:~/OracleHomes/agent10g/bin> ./emctl status agent
./emctl status agent
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.2.0
OMS Version : 10.2.0.2.0
Protocol Version : 10.2.0.2.0
Agent Home : /opt/oracle/OracleHomes/agent10g
Agent binaries : /opt/oracle/OracleHomes/agent10g
Agent Process ID : 22193
Parent Process ID : 22177
Agent URL : https://bitex2.bitex.com:3872/emd/main/
Repository URL : https://grid. bitex.local:1159/em/upload
Started at : 2007-12-05 14:25:46
Started by user : oracle
Last Reload : 2007-12-05 14:25:46
Last successful upload : 2007-12-05 14:33:32
Total Megabytes of XML files uploaded so far : 1.84
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0.00
Available disk space on upload filesystem : 50.69%
Last successful heartbeat to OMS : 2007-12-05 14:33:51
Agent is Running and Ready
/opt/oracle/OracleHomes/agent10g/sysman/emd/targets.xml
<Targets AGENT_TOKEN="05b0697c77651ee3933abf6fa56180dd62c4be3b">
<Target TYPE="oracle_emd" NAME="bitex2.bitex.com.pl:3872"/>
<Target TYPE="host" NAME="bitex2.bitex.com.pl"/>
<Target TYPE="oracle_database" NAME="BITEX.WORLD">
<Property NAME="MachineName" VALUE="bitex2.bitex.com.pl"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="SID" VALUE="BITEX"/>
<Property NAME="OracleHome" VALUE="/opt/oracle/product/10.2/db_1"/>
<Property NAME="UserName" VALUE="f614471b2cb8c5b7" ENCRYPTED="TRUE"/>
<Property NAME="password" VALUE="0d16396a5b89b576b58f90a69cbd2c55" ENCRYPTED="TRUE"/>
<Property NAME="ServiceName" VALUE="BITEX.WORLD"/>
</Target>
<Target TYPE="oracle_listener" NAME="LISTENER_bitex2.bitex.com.pl">
<Property NAME="Machine" VALUE="bitex2.bitex.com.pl"/>
<Property NAME="LsnrName" VALUE="LISTENER"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="OracleHome" VALUE="/opt/oracle/product/10.2/db_1"/>
<Property NAME="ListenerOraDir" VALUE="/opt/oracle/product/10.2/db_1/network/admin"/>
</Target>
<Target TYPE="osm_instance" NAME="+ASM_bitex2.bitex.com.pl">
<Property NAME="SID" VALUE="+ASM"/>
<Property NAME="MachineName" VALUE="bitex2.bitex.com.pl"/>
<Property NAME="OracleHome" VALUE="/opt/oracle/product/10.2/db_1"/>
<Property NAME="UserName" VALUE="SYS"/>
<Property NAME="password" VALUE="0d16396a5b89b576b58f90a69cbd2c55" ENCRYPTED="TRUE"/>
<Property NAME="Role" VALUE="SYSDBA"/>
<Property NAME="Port" VALUE="1521"/>
</Target>
</Targets>

I don't see where your listener hostname matches hostname for your agent, thus agent discovery might have issue putting two and two together. Thus, the need to add it manually, or adjust it in targets.xml file first.
reference
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bitex2.bitex.com.pl)(PORT=1521)))
Agent URL : https://bitex2.bitex.com:3872/emd/main/

Agent installed.. but not visible in Grid Control

Hello guys,
i have installed a new Oracle Grid Control (OMS with new database/repository) and upgraded it to 10.2.0.4.
After that i have installed a Oracle Grid control agent 10.2.0.4 agent on a host and configured it.. but the host is not visible in the Oracle Grid control.
The agent itself seems to work.
UPDATE: The problem is solved.. it was described in metalinknote #389528.1... the problem was that after the upgrade to 10.2.0.4 the secure configuration on the OMS was corrupted.
Regards
Stefan

I got the same error and as mentioned on the metalink note I fixed the problem.
however, on target tab of EM if I search clicking on the button ADD it is still dont finding the agent on the another host.
everythin seems to be ok....
any tips friends ?

Agent is not visible in Cisco Supervisor Desk Top

Similar Messages

Maybe you are looking for