Agent log files
Just installing version 2, deployed the server and 3 agents. Only 1 agent is reporting to the server. I have enabled debug on the agent and reset the service, but where are the logs located ?
All agents are SLES 10 x86, no firewall blocks.
I've increased logging to verbose, and reset the service but on the SLES boxes I can't see anything posted to /var/logs or /var/opt/novell/logs
Documentation doesn't seem to cover log files, I followed a default install as per docs.
Steve
On 2/22/2013 8:56 AM, sgardiner wrote:
>
> Just installing version 2, deployed the server and 3 agents. Only 1
> agent is reporting to the server. I have enabled debug on the agent and
> reset the service, but where are the logs located ?
>
> All agents are SLES 10 x86, no firewall blocks.
>
> I've increased logging to verbose, and reset the service but on the
> SLES boxes I can't see anything posted to /var/logs or
> /var/opt/novell/logs
>
> Documentation doesn't seem to cover log files, I followed a default
> install as per docs.
>
> Steve
>
>
Steve,
Two things. First, the File Reporter agent's log files are stored in
/var/opt/novell/filereporter/agent/log.
Second, did this server previously have any NFR 1.0.x components
installed? Not just the Agent, but potentially the Engine or DSI as well?
- NFMS Support Team
Similar Messages
-
Error State Id 11756 and Client side Scan Agent.log file shows with Error=0x8024400d
We 1500 clients which managed through SCCM 2007. out of 1500 workstations 300 are showing failed to install updates with following error code from scanagent.log. Also the error state messge id is 11756
-Scan Failed for ToolUniqueID={CACC0F54-E6B6-40AA-8BCD-81A1C7BE2918}, with Error=0x8024400d
Error From WUAHanlder.log
OnSearchComplete - Failed to end search job. Error = 0x8024400d.
I searched over google for this issue and found some thing related with Group policy, but there is no exact cause and solution found for this. Could you please some one help me on this.1. On the affected machine, disable the SCCM Agent. To do this, you can run the following commands:
Disable the Service --> sc config CcmExec start= disabled
Stop the Service net stop CcmExec
2. Ensure that the following policy is not enforced on the system:
User Configuration\Administrative Templates\Windows Components\Windows Update\Remove access to use all Windows Update Features
Check this first in the local system policy (you can pull this up using gpedit.msc – Local Group Policy Editor). After that, please run RSOP.msc and ensure that the policy is not configured either. This will give you information from domain policies too.
If the policy is enabled please either remove the policy or disable it.
3. Restart the Automatic Updates service.
4. Now, from the command line, run the following command:
Configure Proxy proxycfg.exe –p “WSUS SERVER FQDN”
By doing this, we are configuring WinHTTP so that server access in upper case is also bypassed.
At this point, we need to test an update scan. Since the SMS Host Agent service is disabled and stopped, we won’t be able to use the agent to run the scan. In this case, we would need to run a scan using the command below:
wuauclt /resetauthorization /detectnow
Check Windowsupdate.log for the outcome of the testing
How to Bypass Proxy server for testing purpose using proxycfg untility. (More details http://msdn.microsoft.com/en-us/library/windows/desktop/ms761351(v=vs.85).aspx). Also find the registry entries you can check for bypass list – “HKEY_LOCAL_MACHINE\
SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\Connections\” .
RanzHat -
Log Reader Agent: transaction log file scan and failure to construct a replicated command
I encountered the following error message related to Log Reader job generated as part of transactional replication setup on publisher. As a result of this error, none of the transactions propagated from publisher to any of its subscribers.
Error Message
2008-02-12 13:06:57.765 Status: 4, code: 22043, text: 'The Log Reader Agent is scanning the transaction log for commands to be replicated. Approximately 24500000 log records have been scanned in pass # 1, 68847 of which were marked for replication, elapsed time 66018 (ms).'.
2008-02-12 13:06:57.843 Status: 0, code: 20011, text: 'The process could not execute 'sp_replcmds' on ServerName.'.
2008-02-12 13:06:57.843 Status: 0, code: 18805, text: 'The Log Reader Agent failed to construct a replicated command from log sequence number (LSN) {00065e22:0002e3d0:0006}. Back up the publication database and contact Customer Support Services.'.
2008-02-12 13:06:57.843 Status: 0, code: 22037, text: 'The process could not execute 'sp_replcmds' on 'ServerName'.'.
Replication agent job kept trying after specified intervals and kept failing with that message.
Investigation
I could clearly see there were transactions waiting to be delilvered to subscribers from the followings:
SELECT * FROM dbo.MSrepl_transactions -- 1162
SELECT * FROM dbo.MSrepl_commands -- 821922
The following steps were taken to further investigate the problem. They further confirmed how transactions were in queue waiting to be delivered to distribution database
-- Returns the commands for transactions marked for replication
EXEC sp_replcmds
-- Returns a result set of all the transactions in the publication database transaction log that are marked for replication but have not been marked as distributed.
EXEC sp_repltrans
-- Returns the commands for transactions marked for replication in readable format
EXEC sp_replshowcmds
Resolution
Taking a backup as suggested in message wouldn't resolve the issue. None of the commands retrieved from sp_browserreplcmds with mentioned LSN in message had no syntactic problems either.
exec sp_browsereplcmds @xact_seqno_start = '0x00065e220002e3d00006'
In a desperate attempt to resolve the problem, I decided to drop all subscriptions. To my surprise Log Reader kept failing with same error again. I thought having no subscription for publications log reader agent would have no reason to scan publisher's transaction log. But obviously I was wrong. Even adding new log reader using sp_addLogreader_agent after deleting the old one would not be any help. Restart of server couldn't do much good either.
EXEC sp_addlogreader_agent
@job_login = 'LoginName',
@job_password = 'Password',
@publisher_security_mode = 1;
When nothing else worked for me, I decided to give it a try to the following procedures reserved for troubleshooting replication
--Updates the record that identifies the last distributed transaction of the server
EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0, @time = 0, @reset = 1
-- Flushes the article cache
EXEC sp_replflush
Bingo !
Log reader agent managed to start successfully this time. I wish if I could have used both commands before I decided to drop subscriptions. It would have saved me considerable effort and time spent re-doing subscriptions.
Question
Even though I managed to resolve the error and have replication funtioning again but I think there might have been some better solution and I would appreciate if you could provide me some feedback and propose your approach to resolve the problem.Hi Hilary,
Will the below truncate the log file marked for replication, is there any data loss, when we execute this command, can you please help me understand, the internal working of this command.
EXEC sp_repldone @xactid = NULL, @xact_segno = NULL, @numtrans = 0, @time = 0, @reset = 1 -
Error/Warning Messages in Agent Debug Log Files
I have noticed the following error message in the Agent Debug Log Files and was wondering if anybody could shed any light on their meaning or what might be causing them.
Warning 1855:####### ServiceEngine: Service::getPolicyResult():No passwd value in session response.
Warning 1855:####### PolicyAgent: Access Manager Cookie not found.
Error 1855:####### AM_SSO_SERVICE: SSOTokenService::getSessionInfo(): Error 18 for sso token ID <SSO_TOKEN_ID>hi
Looks like the message numbers you are processing in the function module CRM_MESSAGE_COLLECT are only for 'errors'.
Please go to Transaction: CRMC_MSGS
Look at the following Application Areas
CRM_ORDER
CRM_ORDERADM_H
CRM_ORDERADM_I
CRM_ORDER_MISC
CRM_ORDER_OUTPUT
Select one of the above and double click 'Single Messages' towards your left side on the screen. Select the relavant message number from the list and check the 'S' flag. Press 'F1' (help) on this box and you will see the following.
Only error messages are saved in the processing log. If a message definitely should be saved - contrary to this rule - then the indicator needs to be set.
You need to make sure that a message marked like this can be deleted again - by calling up the function module CRM_MESSAGES_DELETE in the appropriate place in the program.
When you do these steps, please note the message 'Do not make any changes (SAP data)'. This is not tested and used from my side. Please see if this impacts other functions. I am not sure. Do necessary R&D before you proceed further. Please explore tables CRMC_MESSAGES_S and CRMC_MESSAGES and see if this helps.
Reward if helps
Regards
Manohar -
RAISEERROR not shown in Agent Job Log File Viewer
I use a RAISEERROR for a critical error in a CATCH. When the Job is run, it does fail but it gives the following message. How do i get my @Note to show in the Log File Viewer? Also, where is the log referenced 'WITH LOG'. I looked at the SQL Server Agent
Log and did not see anything.
Message
Executed as user: NT AUTHORITY\SYSTEM. TCP Provider: The specified network name is no longer available. [SQLSTATE 08S01] (Error 64) Communication link failure [SQLSTATE 08S01] (Error 64). The step failed.
DECLARE @Note VARCHAR(500) = 'RAISEERROR due to Critical error'
RAISERROR (@Note, 20, 127) WITH LOGIt says Target Local Server. I scripted out the job and proc and ran them on another SQL Server 2008 R2 and I got the expected results. Maybe the test SQL Server 2008 R2 environment I am using has some quirks (for lack of a more technical term)
@VERSION on SQL Server where I get the [SQLSTATE 08S01] (Error 64)
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86) Apr 2 2010 15:53:02 Copyright (c) Microsoft Corporation Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2) (Hypervisor)
@VERSION on SQL Server where I get expected results
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86) Apr 2 2010 15:53:02 Copyright (c) Microsoft Corporation Developer Edition on Windows NT 6.0 <X86> (Build 6002: Service Pack 2) (Hypervisor)
BELOW are the scripted out job and proc that I have been using to test the RAISERROR
-- scripted out job
USE [msdb]
GO
/****** Object: Job [AATEST] Script Date: 12/15/2013 16:15:09 ******/
IF EXISTS (SELECT job_id FROM msdb.dbo.sysjobs_view WHERE name = N'AATEST')
EXEC msdb.dbo.sp_delete_job @job_id=N'2dd36995-fde6-491c-b4e2-85e8bdea6411', @delete_unused_schedule=1
GO
USE [msdb]
GO
/****** Object: Job [AATEST] Script Date: 12/15/2013 16:15:09 ******/
BEGIN TRANSACTION
DECLARE @ReturnCode INT
SELECT @ReturnCode = 0
/****** Object: JobCategory [[Uncategorized (Local)]]] Script Date: 12/15/2013 16:15:09 ******/
IF NOT EXISTS (SELECT name FROM msdb.dbo.syscategories WHERE name=N'[Uncategorized (Local)]' AND category_class=1)
BEGIN
EXEC @ReturnCode = msdb.dbo.sp_add_category @class=N'JOB', @type=N'LOCAL', @name=N'[Uncategorized (Local)]'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
END
DECLARE @jobId BINARY(16)
EXEC @ReturnCode = msdb.dbo.sp_add_job @job_name=N'AATEST',
@enabled=1,
@notify_level_eventlog=0,
@notify_level_email=0,
@notify_level_netsend=0,
@notify_level_page=0,
@delete_level=0,
@description=N'No description available.',
@category_name=N'[Uncategorized (Local)]',
@owner_login_name=N'FNXXX\eME', @job_id = @jobId OUTPUT
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
/****** Object: Step [STEP1] Script Date: 12/15/2013 16:15:09 ******/
EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId, @step_name=N'STEP1',
@step_id=1,
@cmdexec_success_code=0,
@on_success_action=1,
@on_success_step_id=0,
@on_fail_action=2,
@on_fail_step_id=0,
@retry_attempts=0,
@retry_interval=0,
@os_run_priority=0, @subsystem=N'TSQL',
@command=N'EXEC aap1test',
@database_name=N'Store01',
@flags=0
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_update_job @job_id = @jobId, @start_step_id = 1
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXEC @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @jobId, @server_name = N'(local)'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
COMMIT TRANSACTION
GOTO EndSave
QuitWithRollback:
IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION
EndSave:
GO
-- scripted out proc
USE [Store01]
GO
/****** Object: StoredProcedure [dbo].[aap1test] Script Date: 12/15/2013 16:17:19 ******/
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aap1test]') AND type in (N'P', N'PC'))
DROP PROCEDURE [dbo].[aap1test]
GO
USE [Store01]
GO
/****** Object: StoredProcedure [dbo].[aap1test] Script Date: 12/15/2013 16:17:19 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[aap1test]
AS
BEGIN
RAISERROR ('************ i am here', 20, 127) WITH LOG -- bxg
END
GO -
How to trace log file of Lumira Agent
Hi All,
I found Lumira Client log file in "C:\Program Files\SAP Lumira\Desktop\debug.log". It maintains all logs like registerResourcePath,Registering Datasource, etc.
But Lumira Agent not maintain any log for
how many new rows added in local data source or cloud data source?
any connection error for Lumira cloud?
any Scheduler error for starting?
refreshing start time?
etc
Is it any tool or any file that maintain log?
Thanks,
Somnath A. KadamHi,
1. an indicator of the # delta rows is not something that exists in the product yet. it would make a nice enhancement actually.
2. Yes, the lumira desktop log file (as discussed in your other thread) would capture cloud login errors. but obviously, it is not possible for you to see the traces from the cloud infrastructure.
3. the refresh timestamp would be maintained on the resulting scheduled document (information in the footer)
4. Internally, we are asking for information about tracing the Agent - this is a very valid point.
I believe that these issues are also being tracked internally via your Support ticket? personally, i would recommend that you focus on that investigation with engineering.
Regards,
H -
Total lock-ups with fan running - translate system.log file please!?
Hi, all. My late 2005 2.3 gig dual G5 has been experiencing random lock ups for as long as I can remember. My system is up to date and I have tested each pair of the 5 gigs of ram that I have and the system freezes with each pair. It can happen at any time, when I am doing absolutely nothing, for example, overnight. I am at my wits end!
Here's the system log file for the latest freezes. Can anyone tell me what's going on here??? I really need to get to the root of this problem. Thanks so so much in advance.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/Macintosh HD failed 89.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Macintosh HD, flags 524288, pid 62
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This service performs licensing functions on behalf of FLEXnet enabled products.\n
Apr 12 18:01:06 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:01:49 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:08:29 Marc-Weinbergs-Computer diskarbitrationd[69]: SDCopy [1056]:36091 not responding.
Apr 12 18:16:18 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:16:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 19:24:12 Marc-Weinbergs-Computer ntpd[191]: time reset -0.650307 s
Apr 13 01:05:45 Marc-Weinbergs-Computer ntpd[191]: time reset -0.496917 s
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 07:15:03 Marc-Weinbergs-Computer postfix/postqueue[1778]: warning: Mail system is down -- accessing queue directly
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 15:53:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 15:53:54 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 22:15:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 13 22:15:47 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[63]: starting
Apr 13 22:15:48 localhost kernel[0]: vmpagebootstrap: 506550 free pages
Apr 13 22:15:47 localhost memberd[70]: memberd starting up
Apr 13 22:15:49 localhost kernel[0]: migtable_maxdispl = 70
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.FTATASil3132E" from archive.
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.Sil3112DeviceNub" from archive.
Apr 13 22:15:49 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 13 22:15:49 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 13 22:15:49 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Apr 13 22:15:49 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Apr 13 22:15:49 localhost kernel[0]: DART enabled
Apr 13 22:15:47 localhost DirectoryService[75]: Launched version 2.1 (v353.6)
Apr 13 22:15:49 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe1b4c7e; max speed s800.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:48 localhost lookupd[71]: lookupd (version 369.5) starting - Sun Apr 13 22:15:48 2008
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: Extension "com.microsoft.driver.MicrosoftKeyboardUSB" has no kernel dependency.
Apr 13 22:15:49 localhost kernel[0]: AppleSMUparent::clientNotifyData nobody registed for 0x40
Apr 13 22:15:49 localhost kernel[0]: Security auditing service present
Apr 13 22:15:49 localhost kernel[0]: BSM auditing present
Apr 13 22:15:49 localhost kernel[0]: disabled
Apr 13 22:15:49 localhost kernel[0]: rooting via boot-uuid from /chosen: 82827EDF-0263-3B93-BEED-4B114E820B85
Apr 13 22:15:49 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 13 22:15:49 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOApplePartitionScheme/AppleHFS_Untitled1@10
Apr 13 22:15:49 localhost kernel[0]: BSD root: disk0s10, major 14, minor 12
Apr 13 22:15:49 localhost kernel[0]: jnl: replay_journal: from: 8451584 to: 11420160 (joffset 0x952000)
Apr 13 22:15:50 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Apr 13 22:15:50 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x67, SDB vers = 0x01,
Apr 13 22:15:50 localhost kernel[0]: HFS: Removed 8 orphaned unlinked files
Apr 13 22:15:50 localhost kernel[0]: Jettisoning kernel linker.
Apr 13 22:15:50 localhost kernel[0]: Resetting IOCatalogue.
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 3
Apr 13 22:15:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Apr 13 22:15:50 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:78
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:79
Apr 13 22:15:51 localhost lookupd[86]: lookupd (version 369.5) starting - Sun Apr 13 22:15:51 2008
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 21611008 to: 7857152 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 673280 to: 24382976 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 3890176 to: 6294016 (joffset 0x7d01000)
Apr 13 22:15:51 localhost diskarbitrationd[69]: disk0s10 hfs 82827EDF-0263-3B93-BEED-4B114E820B85 NewestSeagate /
Apr 13 22:15:52 localhost kernel[0]: NVDA,Display-A: vram [90020000:10000000]
Apr 13 22:15:52 localhost mDNSResponder: Adding browse domain local.
Apr 13 22:15:53 localhost kernel[0]: hfs mount: enabling extended security on Maxtor
Apr 13 22:15:53 localhost diskarbitrationd[69]: disk1s3 hfs 0DBE2113-B1F5-388F-BF70-2E366A095330 Maxtor /Volumes/Maxtor
Apr 13 22:15:54 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
Apr 13 22:15:54 Marc-Weinbergs-Computer configd[67]: setting hostname to "Marc-Weinbergs-Computer.local"
Apr 13 22:15:54 Marc-Weinbergs-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 13 22:15:56 Marc-Weinbergs-Computer diskarbitrationd[69]: disk2s3 hfs 971CABB3-C211-38FC-8E91-6B4F8EA5FA20 B08-09-07 /Volumes/B08-09-07
Apr 13 22:15:56 Marc-Weinbergs-Computer loginwindow[110]: Login Window Started Security Agent
Apr 13 22:15:57 Marc-Weinbergs-Computer kernel[0]: AppleBCM5701Ethernet - en1 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Apr 13 22:15:57 Marc-Weinbergs-Computer configd[67]: AppleTalk startup
Apr 13 22:15:57 Marc-Weinbergs-Computer TabletDriver[119]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:15:59 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:01 Marc-Weinbergs-Computer lookupd[123]: lookupd (version 369.5) starting - Sun Apr 13 22:16:01 2008
Apr 13 22:16:01 Marc-Weinbergs-Computer kernel[0]: HFS: Removed 2 orphaned unlinked files
Apr 13 22:16:01 Marc-Weinbergs-Computer diskarbitrationd[69]: disk3s3 hfs CDA8BCC5-0CE4-33E8-A910-4B0952DBC230 FullBU-09-07 /Volumes/FullBU-09-07
Apr 13 22:16:04 Marc-Weinbergs-Computer configd[67]: target=enable-network: disabled
Apr 13 22:16:05 Marc-Weinbergs-Computer configd[67]: AppleTalk startup complete
Apr 13 22:16:09 Marc-Weinbergs-Computer TabletDriver[237]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: exited with exit code: 253
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: 9 more failures without living at least 60 seconds will cause job removal
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0L6LR', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0L6LR', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0LGS4', reports it is functioning at a temperature of 100.4F (38C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0LGS4', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '9RV000FC', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '9RV000FC', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', reports it is functioning at a temperature of 89.6F (32C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', appear to still be available. (Total Available: 63) (Use Attempts: 0)
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
etc.Hi-
The machine seems to be having trouble with loading certain drivers, but, as this isn't a crash log, and doesn't show the "hang-up" or freeze, it's hard to tell.
Noted possibilities are:
-Microsoft keyboard (possible USB power problem)
-firmtek driver (from archive) questionable due to the "archive" annotation
-Wacom tablet driver, causing system problems
Running in Safe mode without freezes would help to determine if one of these drivers is the problem.
Other possibilities are outdated drivers, or simply a need to reinstall the OS.
If unnecessary, removing the driver(s) would be a good idea.
External USB and Firewire devices are all suspect, should all be disconnected, revert to Apple keyboard, and test system performance. Adding one device at a time, and testing each will be necessary to clear each device.
I have experienced system trouble when a Wacom tablet was not connected, but the driver was left installed.
Disabling the driver from Startup items may be necessary to test without the Wacom tablet connected. -
Single Primary Site SCCM 2012 R2 CU4.
Deploying BareMetal machines using basic task sequence.
The machine joins the domain however the sccm client install failed and I cannot locate the SMSTS.log anywhere.
In C:\windows we have ccmsetup with ccmsetup.log, client.msi.log and MicrosoftPolicyPlatformSetup.msi.
There is no c:\_SMSTaskSequence or C:\WIndows\CCM folder.
CCMSETUP.log
<![LOG[Deleted file C:\Windows\ccmsetup\ccmsetup.cab.download]LOG]!><time="13:41:10.611+300" date="02-20-2015" component="ccmsetup" context="" type="1" thread="984" file="ccmsetup.cpp:9497">
<![LOG[Deleted file C:\Windows\ccmsetup\ccmsetup.xml]LOG]!><time="13:41:10.611+300" date="02-20-2015" component="ccmsetup" context="" type="1" thread="984" file="ccmsetup.cpp:9497">
<![LOG[Deleted file C:\Windows\ccmsetup\vcredist_x86.exe.download]LOG]!><time="13:41:10.611+300" date="02-20-2015" component="ccmsetup" context="" type="1" thread="984" file="ccmsetup.cpp:9497">
<![LOG[Deleted file C:\Windows\ccmsetup\vc50727_x64.exe.download]LOG]!><time="13:41:10.611+300" date="02-20-2015" component="ccmsetup" context="" type="1" thread="984" file="ccmsetup.cpp:9497">
<![LOG[Deleted file C:\Windows\ccmsetup\MicrosoftPolicyPlatformSetup.msi.download]LOG]!><time="13:41:10.611+300" date="02-20-2015" component="ccmsetup" context="" type="1" thread="984"
file="ccmsetup.cpp:9497">
<![LOG[Deleted file C:\Windows\ccmsetup\WindowsFirewallConfigurationProvider.msi.download]LOG]!><time="13:41:10.611+300" date="02-20-2015" component="ccmsetup" context="" type="1" thread="984"
file="ccmsetup.cpp:9497">
<![LOG[Deleted file C:\Windows\ccmsetup\SCEPInstall.exe.download]LOG]!><time="13:41:10.611+300" date="02-20-2015" component="ccmsetup" context="" type="1" thread="984" file="ccmsetup.cpp:9497">
<![LOG[Deleted file C:\Windows\ccmsetup\client.msi.download]LOG]!><time="13:41:10.627+300" date="02-20-2015" component="ccmsetup" context="" type="1" thread="984" file="ccmsetup.cpp:9497">
<![LOG[CcmSetup failed with error code 0x80070663]LOG]!><time="13:41:10.627+300" date="02-20-2015" component="ccmsetup" context="" type="1" thread="984" file="ccmsetup.cpp:10883">
CLIENT.MSI
MSI (s) (A4:64) [13:41:10:003]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (A4:64) [13:41:10:003]: File will have security applied from OpCode.
MSI (s) (A4:64) [13:41:10:050]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Windows\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi' against software restriction policy
MSI (s) (A4:64) [13:41:10:050]: SOFTWARE RESTRICTION POLICY: C:\Windows\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi has a digital signature
MSI (s) (A4:64) [13:41:10:050]: SOFTWARE RESTRICTION POLICY: C:\Windows\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi is permitted to run because the user token authorizes execution (system or service token).
MSI (s) (A4:64) [13:41:10:050]: End dialog not enabled
MSI (s) (A4:64) [13:41:10:050]: Original package ==> C:\Windows\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi
MSI (s) (A4:64) [13:41:10:050]: Package we're running from ==> C:\Windows\Installer\5159e.msi
MSI (s) (A4:64) [13:41:10:050]: APPCOMPAT: Compatibility mode property overrides found.
MSI (s) (A4:64) [13:41:10:050]: APPCOMPAT: looking for appcompat database entry with ProductCode '{8864FB91-94EE-4F16-A144-0D82A232049D}'.
MSI (s) (A4:64) [13:41:10:050]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (A4:64) [13:41:10:050]: Machine policy value 'TransformsSecure' is 0
MSI (s) (A4:64) [13:41:10:050]: User policy value 'TransformsAtSource' is 0
MSI (s) (A4:64) [13:41:10:050]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (A4:64) [13:41:10:050]: Unable to create a temp copy of patch 'C:\WINDOWS\TEMP\KB2994331_X64.MSP'.
MSI (s) (A4:64) [13:41:10:050]: Note: 1: 1708
MSI (s) (A4:64) [13:41:10:050]: Product: Configuration Manager Client -- Installation failed.
MSI (s) (A4:64) [13:41:10:050]: Windows Installer installed the product. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1635.
MSI (s) (A4:64) [13:41:10:112]: MainEngineThread is returning 1635
MSI (s) (A4:74) [13:41:10:112]: No System Restore sequence number for this installation.
This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.
C:\Windows\ccmsetup\{181D79D7-1115-4D96-8E9B-5833DF92FBB4}\client.msi
MSI (s) (A4:74) [13:41:10:112]: User policy value 'DisableRollback' is 0
MSI (s) (A4:74) [13:41:10:112]: Machine policy value 'DisableRollback' is 0
MSI (s) (A4:74) [13:41:10:112]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (A4:74) [13:41:10:112]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (A4:74) [13:41:10:112]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (A4:74) [13:41:10:112]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (A4:74) [13:41:10:112]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (A4:74) [13:41:10:112]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (A4:74) [13:41:10:112]: Restoring environment variables
MSI (c) (54:70) [13:41:10:112]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (54:70) [13:41:10:112]: MainEngineThread is returning 1635
=== Verbose logging stopped: 2/20/2015 13:41:10 ===Until the client agent is installed, smsts.log will be in C:\Windows\Temp.
That won't help you troubleshoot the client agent installation failure though. For Windows Installer installations, 1603 is a generic error code that means you needs to examine the verbose msi log file (client.msi.log in this case) in depth. Searching
for the string "return code 3" and then scanning the lines above this will lead you to exact item that failed.
Jason | http://blog.configmgrftw.com | @jasonsandys -
System Update 5.01.0005 hangs every attempt on my X121e (log files inline)
Hi, I installed TVSU on my x121e laptop and it hangs on 95% on every attempt, like 5th time now. I have tried to uninstall and reinstall and I am using the latest version, I think, which is 5.01.0005.
Note that the system totally freezes on me. Nothing responds and Ctrl+Alt+Delete does not do anything. Only way is to shut down using the power button.
System:
ThinkPad x121e (30456UG)
Windows 8 Pro 64-bit (v6.2 build 9200)
Any ideas on what I can do to get it running? I don't know how to attach log files so I pasted them in full.
tvsu_exe.log:
TSS(L) 1: 22:07:56:0953 tvsu.cpp(1825): Installdir: C:\Program Files (x86)\Lenovo\System Update
TSS(L) 1: 22:07:57:0281 tvsu.cpp(1754): Installdir: C:\Program Files (x86)\Lenovo\System Update
TSS(L) 1: 22:07:57:0281 tvsu.cpp(1775): szCmd: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
TSS(L) 1: 22:08:02:0579 tvsu.cpp(579): StartTvsukernel : admin
TSS(L) 1: 22:08:02:0594 tvsu.cpp(586): Begin InvokeUacSdkViaService
TSS(L) 1: 22:08:02:0626 tvsu.cpp(431): Installdir: C:\Program Files (x86)\Lenovo\System Update
TSS(L) 1: 22:08:02:0626 tvsu.cpp(466): szCmd: C:\Program Files (x86)\Lenovo\System Update\TvsuCommandLauncher.exe
ServiceStart.log = empty
UACSdk.txt:
TSS(L) 0: 22:08:06:0188 uacsdk.cpp(170): User: ADMIN
TSS(L) 0: 22:08:06:0204 uacsdk.cpp(171): TempRegFile:
TSS(L) 0: 22:08:06:0204 uacsdk.cpp(172): ComdLine:
TSS(L) 0: 22:08:06:0220 uacsdk.cpp(180): ComdLine tvsukernel: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
TSS(L) 0: 22:08:06:0220 uacsdk.cpp(190): Vista admin
TSS(L) 0: 22:08:06:0220 vista.cpp(62): StartUIOnVistaWithAdminLongon ComdLine: C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
TSS(L) 0: 22:08:06:0220 vista.cpp(70): WTSGetActiveConsoleSessionId dwSessionId: 1
TSS(L) 0: 22:08:06:0235 vista.cpp(124): ImpersonateLoggedOnUser succeed!
TSS(L) 0: 22:08:06:0235 vista.cpp(129): CreateProcessAsUser CommandLine : C:\Program Files (x86)\Lenovo\System Update\\Tvsukernel.exe
TSS(L) 0: 22:08:06:0423 vista.cpp(154): CreateProcessAsUser succeed!Hmm, I can in fact not paste the log since the message "exceeds 20,000 chars. Where do I find the "attach file" Icon - looking everywhere.
Pasting bits and pieces from tvsu_log_121219220812.txt:
Severe 2012-12-19 , 10:08:13
vid Tvsu.Sdk.SuSdk.StartApplication()
Message: Application runs with the framework: 2.0.50727.6400
Severe 2012-12-19 , 10:09:04 vid Tvsu.FileDownloader.HttpsDownload.Init(FileDownloadInfo fileInfo) Message: Debug Log: Init method:GET
Severe 2012-12-19 , 10:09:05 vid Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate) Message: Debug Log: doDownloadByHttps InterException is null, uri:https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_01_00.xml
Severe 2012-12-19 , 10:09:05 vid Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate) Message: Debug Log doDownloadByHttps webException message:Fjärrservern returnerade ett fel: (404) Kunde inte hittas.
Severe 2012-12-19 , 10:09:05 vid Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate) Message: Debug Log server path: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_01_00.xml responseStatus:404
Severe 2012-12-19 , 10:09:05 vid Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate) Message: Debug Log server path: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_01_00.xml webException.StackTrace: vid System.Net.HttpWebRequest.GetResponse() vid Tvsu.FileDownloader.HttpsDownload.doDownloadByHttps(FileDownloadInfo fileInfo, downloadingDelegate downDelegate)
Severe 2012-12-19 , 10:09:05
vid Tvsu.Engine.Process.HelloProcess.Start()
Message: Could't connect to the HelloServer, no UDF file was downloaded
Severe 2012-12-19 , 10:09:31
vid Tvsu.FileDownloader.HttpsDownload.Init(FileDownloadInfo fileInfo)
Message: Debug Log: Init method:GET
Then just TONS of Info messages and here is the end of the file
Info 2012-12-19 , 10:09:37 vid Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6() Message: Setting DONE status.
Info 2012-12-19 , 10:09:37 vid Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6() Message: Setting PROCESSING status.
Info 2012-12-19 , 10:09:37 vid Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups) Message: Candidate list: Critical patch to fix TVSU UTS issue[reboot type 1] ThinkVantage Fingerprint Software for Windows 7/8 32-bit[reboot type 3] Lenovo Power Management Driver - 8 [32,64][reboot type 3] ThinkVantage Aktivt skyddssystem (64bit)[reboot type 3] ThinkVantage Fingerprint Software for Windows 7/8 64-bit[reboot type 3] WiMAX Driver for Intel Cards (For Win8 64bit)[reboot type 3] Intel Management Engine Interface driver for Win8 32/64 bit[reboot type 3] Synaptics ThinkPad UltraNav Driver - Vista/7/8 [32,64][reboot type 3] Realtek Card Reader Driver for Windows 8 32/64 bit -WW-[reboot type 3] WiFi driver for Intel cards Driver - 8 [64][reboot type 3] Lenovo Settings Dependency Pacakge - 8 [32,64][reboot type 3] ThinkVantage Aktivt skyddssystem (64bit)[reboot type 3] AMD USB Filter Driver for Windows 8 32/64bit[reboot type 3] ThinkVantage Aktivt skyddssystem (32bit)[reboot type 3] WiFi driver for Intel cards Driver - 8 [32][reboot type 3] WiMAX Driver for Intel Cards (For Win8 32bit)[reboot type 3]
Info 2012-12-19 , 10:09:37 vid Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups) Message: Resulted order of candidate list: ThinkVantage Fingerprint Software for Windows 7/8 32-bit[reboot type 3] Lenovo Power Management Driver - 8 [32,64][reboot type 3] ThinkVantage Aktivt skyddssystem (64bit)[reboot type 3] ThinkVantage Fingerprint Software for Windows 7/8 64-bit[reboot type 3] WiMAX Driver for Intel Cards (For Win8 64bit)[reboot type 3] Intel Management Engine Interface driver for Win8 32/64 bit[reboot type 3] Synaptics ThinkPad UltraNav Driver - Vista/7/8 [32,64][reboot type 3] Realtek Card Reader Driver for Windows 8 32/64 bit -WW-[reboot type 3] WiFi driver for Intel cards Driver - 8 [64][reboot type 3] Lenovo Settings Dependency Pacakge - 8 [32,64][reboot type 3] ThinkVantage Aktivt skyddssystem (64bit)[reboot type 3] AMD USB Filter Driver for Windows 8 32/64bit[reboot type 3] ThinkVantage Aktivt skyddssystem (32bit)[reboot type 3] WiFi driver for Intel cards Driver - 8 [32][reboot type 3] WiMAX Driver for Intel Cards (For Win8 32bit)[reboot type 3] Critical patch to fix TVSU UTS issue[reboot type 1]
Info 2012-12-19 , 10:09:37 vid Tvsu.Coreq.CoreqProcessor.ProcessUpdatesImplementation(Update[] updates) Message: Beginning Coreq process: Recieved 16Updates -
How to fetch and display arbitrary log files from a managed host?
We are creating a small management portal for a custom application and need a way to display, in a browser, the contents of an arbitrary log file located on an EM managed host. The effect we are looking for is similar to what you get when you show the contents of a database alert log using EM.
I want to extend the EM agent to get the log and display the contents, but see two problems: (1) it seems like we would have to schedule the fetch of the log contents to happen on a regular basis and would not be able to do it on demand and (2) storing the results in the EM repository seems like it could consume a pile of storage, even if it only stores the logs for 24 hours.
I am pretty sure we can bypass the repository somehow because I think the "show database alert log" EM process does so. Of course, I can't really be sure how this code is getting the alert log, but it seems reasonable to assume it is using the management agent.
Is there some API for the EM Agent that I am missing?
Any ideas would be appreciated.From within OEM it doesnt look possible. User defined metrics (UDM) can only return number or a string. The alertlog fetch is done via alertlogViewer.pl while being passed a couple of parameters.
OEM does have a preliminary/rough api available at http://www.oracle.com/technology/products/oem/emx/index.html but I havent seen anyone make use of it yet.
If you use just a web connection then you will probably run into security issues as a web server can usually only view/access stuff under their htmldoc dir.
Seems like some non-OEM very custom code is what you seek.. -
Error for Generating a log file
Hi Cezar sanos,
i am trying to generate a log file for ODI with details like who logged in and what is is doing kind of things.
For this i am executing the command like
lagentscheduler.bat "-PORT=20910" "-NAME=localagent" "-V=2" > C:\OraHome_1\logs\agent1.log.
But its getting the error like
A JDK is required to execute Web Services with OracleDI. You are currently using a JRE.
OracleDI: Starting Scheduler Agent ...
Starting Oracle Data Integrator Agent...
Version : 10.1.3.5 - 10/11/2008
DwgJv.main: Exit. Return code:-1Just in case,
the following message :
A JDK is required to execute Web Services with OracleDI. You are currently using a JRE.
is only a warning and not an error message.... -
Need help in understanding the result logged in gateway log file
I have installed unixODBC.x86_64 (2.2.14) and mysql-connector-odbc-5.3.4-linux-el6-x85-64 on Oracle Linux Server 6.5 64 bit with Oracle 12c and MySQL Community Server 5..6.14. Oracle database character set is AL32UTF8 and MySQL database character set is latin1. I have copied the content of a gateway log file to the bottom of this entry and boldfaced the lines that I hope someone can explain to me what they mean and what should I do.
Gateway init file has the following configuration:
HS_FDS_CONNECT_INFO = myodbc5
HS_FDS_TRACE_LEVEL = DEBUG
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so
HS_LANGUAGE=AMERICAN_AMERICA.WE8ISO8859P15
set ODBCSYSINI=/tmp/shared
ODBC.ini located in /tmp/shared has the following configuration:
[myodbc5]
Driver = /tmp/shared/mysql-odbc/lib/libmyodbc5w.so
DATABASE = peter
DESCRIPTION = MySQL ODBC 5.3 Unicode Driver
SERVER = localhost
UID = peter
PASSWORD = peter
SOCKET = /var/lib/mysql/mysql.sock
Listener.ora has the following configuration:
LISTENER =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = PETER)
(ORACLE_HOME = /opt/oracle/12c)
(SID_NAME = PETER)
(SID_DESC =
(SID_NAME = mysqlodbc)
(ORACLE_HOME = /opt/oracle/12c)
(PROGRAM = dg4odbc)
Tnsnames.ora has the following configuration:
mysqlodbc =
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP) (HOST=localhost) (PORT=1521)
(CONNECT_DATA=
(SID=mysqlodbc))
(HS=OK)
Gateway log file has the following content:
Oracle Corporation --- TUESDAY FEB 17 2015 14:08:39.306
Heterogeneous Agent Release
12.1.0.1.0
Oracle Corporation --- TUESDAY FEB 17 2015 14:08:39.306
Version 12.1.0.1.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL32UTF8"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
setting HS_FDS_QUOTE_IDENTIFIER to default of "TRUE"
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
Default value of 64 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "mysqlodbc"
Product-Info:
Port Rls/Upd:1/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:12.1.0.1.0_0017, Instance:mysqlodbc
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=46
HOCXU_DRV_NCHAR=873
HOCXU_DB_CSET=873
HS_LANGUAGE is AMERICAN_AMERICA.WE8ISO8859P15
LANG=en_US.UTF-8
HOCXU_SEM_VER=121000
HOCXU_VC2_MAX=4000
HOCXU_RAW_MAX=2000
Entered hgolofn at 2015/02/17-14:08:39
HOSGIP for "HS_FDS_SHAREABLE_NAME" returned "/usr/lib64/libodbc.so"
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac07fe0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac08110
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac089d0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac09d40
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac11c00
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac120a0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac148d0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac15dd0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac16610
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac18060
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac18070
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac197c0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1cb80
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1cf60
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1eb70
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1f800
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1fb80
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac21af0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac21f10
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac23b20
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac23960
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac0a360
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac0bc20
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac0f710
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac11470
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac12c00
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac15810
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac16f70
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac18400
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac19ec0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1a390
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1b5f0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1c320
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1d9c0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1dcc0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac1e7c0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac20380
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac208d0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac20eb0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac21520
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac22210
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac24fb0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac23610
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac26910
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Entered hgolofns at 2015/02/17-14:08:39
symbol_peflctx=0xac275e0
hoaerr:0
Exiting hgolofns at 2015/02/17-14:08:39
Exiting hgolofn, rc=0 at 2015/02/17-14:08:39
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTERS" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
Invalid value of 64 given for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2015/02/17-14:08:39
Entered hgolgon at 2015/02/17-14:08:39
reco:0, name:peter, tflag:0
Entered hgosuec at 2015/02/17-14:08:39
Exiting hgosuec, rc=0 at 2015/02/17-14:08:39
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using peter as default schema
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2015/02/17-14:08:39
HS_FDS_CONNECT_INFO = "myodbc5"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2015/02/17-14:08:39
dsn:myodbc5, name:peter
optn:
Entered hgocip at 2015/02/17-14:08:39
dsn:myodbc5
Exiting hgocip, rc=0 at 2015/02/17-14:08:39
Exiting hgogenconstr, rc=0 at 2015/02/17-14:08:39
Entered hgolosf at 2015/02/17-14:08:39
Exiting hgolosf, rc=0 at 2015/02/17-14:08:39
DriverName:libmyodbc5w.so, DriverVer:05.03.0004
DBMS Name:MySQL, DBMS Version:5.6.14
Exiting hgocont, rc=0 at 2015/02/17-14:08:39
SQLGetInfo returns Y for SQL_CATALOG_NAME
SQLGetInfo returns 192 for SQL_MAX_CATALOG_NAME_LEN
Exiting hgolgon, rc=0 at 2015/02/17-14:08:39
Entered hgoulcp at 2015/02/17-14:08:39
Entered hgowlst at 2015/02/17-14:08:39
Exiting hgowlst, rc=0 at 2015/02/17-14:08:39
SQLGetInfo returns 0x0 for SQL_SCHEMA_USAGE
TXN Capable:3, Isolation Option:0xf
SQLGetInfo returns 0 for SQL_MAX_SCHEMA_NAME_LEN
SQL_SU_DML_STATEMENTS bit is not set. Schemas are not supported by FDS.
SQLGetInfo returns 192 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 192 for SQL_MAX_PROCEDURE_NAME_LEN
HOSGIP returned value of "TRUE" for HS_FDS_QUOTE_IDENTIFIER
SQLGetInfo returns ` (0x60) for SQL_IDENTIFIER_QUOTE_CHAR
Entered hgopoer at 2015/02/17-14:08:39
Exiting hgopoer, rc=0 at 2015/02/17-14:08:39 with error ptr FILE:hgopoer.c LINE:195 ID:GetDiagRec error
hgoulcp, line 2138: calling SQLFetch got sqlstate 00000
3 instance capabilities will be uploaded
capno:5964, context:0x00000000, add-info: 0
capno:5989, context:0x00000000, add-info: 0
capno:5992, context:0x0001ffff, add-info: 1, translation:"`"
Exiting hgoulcp, rc=0 at 2015/02/17-14:08:39 with error ptr FILE:hgoulcp.c LINE:2140 ID:Translation text for Unicode literal not supported. Leaving HOACOPTTSTN1 capability off.
Entered hgouldt at 2015/02/17-14:08:39
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2015/02/17-14:08:39
Entered hgobegn at 2015/02/17-14:08:39
tflag:0 , initial:1
hoi:0xd991a328, ttid (len 24) is ...
00: 50455445 522E3864 63666537 31332E31 [PETER.8dcfe713.1]
10: 2E33312E 32303235 [.31.2025]
tbid (len 21) is ...
00: 50455445 525B312E 33312E32 3032355D [PETER[1.31.2025]]
10: 5B312E34 5D [[1.4]]
Exiting hgobegn, rc=0 at 2015/02/17-14:08:39
Entered hgodtab at 2015/02/17-14:08:39
count:1
table: mysql_table1
Allocate hoada[0] @ 0x10b6300
Entered hgopcda at 2015/02/17-14:08:39
Column:1(dest): dtype:1 (CHAR), prc/scl:5/0, nullbl:1, octet:5, sign:1, radix:0
Exiting hgopcda, rc=0 at 2015/02/17-14:08:39
The hoada for table mysql_table1 follows...
hgodtab, line 1079: Printing hoada @ 0x10b6300
MAX:1, ACTUAL:1, BRC:1, WHT=6 (TABLE_DESCRIBE)
hoadaMOD bit-values found (0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
1 CHAR Y 5 5 0/ 0 0 0 200 dest
Exiting hgodtab, rc=0 at 2015/02/17-14:08:39
Entered hgodafr, cursor id 0 at 2015/02/17-14:08:39
Free hoada @ 0x10b6300
Exiting hgodafr, rc=0 at 2015/02/17-14:08:39
Entered hgopars, cursor id 1 at 2015/02/17-14:08:39
type:0
SQL text from hgopars, id=1, len=39 ...
00: 53454C45 43542041 312E6064 65737460 [SELECT A1.`dest`]
10: 2046524F 4D20606D 7973716C 5F746162 [ FROM `mysql_tab]
20: 6C653160 204131 [le1` A1]
Exiting hgopars, rc=0 at 2015/02/17-14:08:39
Entered hgoopen, cursor id 1 at 2015/02/17-14:08:39
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2015/02/17-14:08:39
Entered hgodscr, cursor id 1 at 2015/02/17-14:08:39
Allocate hoada @ 0x10b6300
Entered hgodscr_process_sellist_description at 2015/02/17-14:08:39
Entered hgopcda at 2015/02/17-14:08:39
Column:1(dest): dtype:1 (CHAR), prc/scl:5/0, nullbl:1, octet:5, sign:1, radix:0
Exiting hgopcda, rc=0 at 2015/02/17-14:08:39
hgodscr, line 470: Printing hoada @ 0x10b6300
MAX:1, ACTUAL:1, BRC:100, WHT=5 (SELECT_LIST)
hoadaMOD bit-values found (0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
1 CHAR Y 5 5 0/ 0 0 0 200 dest
Exiting hgodscr, rc=0 at 2015/02/17-14:08:39
Entered hgoftch, cursor id 1 at 2015/02/17-14:08:39
hgoftch, line 135: Printing hoada @ 0x10b6300
MAX:1, ACTUAL:1, BRC:100, WHT=5 (SELECT_LIST)
hoadaMOD bit-values found (0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
1 CHAR Y 5 5 0/ 0 0 0 200 dest
Performing delayed open.
SQLBindCol: column 1, cdatatype: 1, bflsz: 6
SQLFetch: row: 1, column 1, bflsz: 6, bflar: 5
SQLFetch: row: 1, column 1, bflsz: 6, bflar: 5, (bfl: 5, mbl: 5)
1 rows fetched
Exiting hgoftch, rc=0 at 2015/02/17-14:08:39
Entered hgoftch, cursor id 1 at 2015/02/17-14:08:39
hgoftch, line 135: Printing hoada @ 0x10b6300
MAX:1, ACTUAL:1, BRC:1, WHT=5 (SELECT_LIST)
hoadaMOD bit-values found (0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
1 CHAR Y 5 5 0/ 0 0 0 200 dest
0 rows fetched
Exiting hgoftch, rc=1403 at 2015/02/17-14:08:39
Entered hgoclse, cursor id 1 at 2015/02/17-14:23:33
Exiting hgoclse, rc=0 at 2015/02/17-14:23:33
Entered hgodafr, cursor id 1 at 2015/02/17-14:23:33
Free hoada @ 0x10b6300
Exiting hgodafr, rc=0 at 2015/02/17-14:23:33
Entered hgocomm at 2015/02/17-14:23:33
keepinfo:0, tflag:1
00: 50455445 522E3864 63666537 31332E31 [PETER.8dcfe713.1]
10: 2E33312E 32303235 [.31.2025]
tbid (len 21) is ...
00: 50455445 525B312E 33312E32 3032355D [PETER[1.31.2025]]
10: 5B312E34 5D [[1.4]]
cmt(0):
Entered hgocpctx at 2015/02/17-14:23:33
Exiting hgocpctx, rc=0 at 2015/02/17-14:23:33
Exiting hgocomm, rc=0 at 2015/02/17-14:23:33
Entered hgolgof at 2015/02/17-14:23:33
tflag:1
Exiting hgolgof, rc=0 at 2015/02/17-14:23:33
Entered hgoexit at 2015/02/17-14:23:33
Exiting hgoexit, rc=0
Entered horcrces_CleanupExtprocSession at 2015/02/17-14:23:33
Entered horcrpooe_PopOciEnv at 2015/02/17-14:23:33
Entered horcrfoe_FreeOciEnv at 2015/02/17-14:23:33
Exiting horcrfoe_FreeOciEnv at 2015/02/17-14:23:33
Entered horcrfse_FreeStackElt at 2015/02/17-14:23:33
Exiting horcrfse_FreeStackElt at 2015/02/17-14:23:33
Exiting horcrpooe_PopOciEnv at 2015/02/17-14:23:33
Exiting horcrces_CleanupExtprocSession at 2015/02/17-14:23:33Hi Matt,
There is no error and data is returned. It is just my curiosity to know about those lines in the log file and wonder whether they imply some underlying issues.
Thanks,
Peter -
Unable to view SQL Request in Log files
Hi Folks,
I am facing an issue which I am unable to find out the solution to view the physical query generated in log files in Presentation Services.
Below is the SQL Request generated but I want to view the exact physical query i.e SQL Request which is hitting DB.
So please guiude me to resolve this issue, I guess it is because of Initialization blocks created which is blocking to view the SQL request.
-------------------- SQL Request:
set variable LOGLEVEL = 7;SELECT "- Policy Effective-Start Date"."Start Quarter" saw_0, "- Insurance Policy Facts".Revenue saw_1, "- Insurance Policy Facts"."# Insurance Policies" saw_2, "Insurance Policy".Status saw_3, "Insurance Policy".Type saw_4 FROM "Insurance Policies" WHERE ("Insurance Policy".Type = 'Policy') AND ("- Policy Effective-Start Date"."Start Julian Day Number" BETWEEN VALUEOF(CURRENT_JULIAN_DAY)-365 AND VALUEOF("CURRENT_JULIAN_DAY")) ORDER BY saw_0, saw_3, saw_4
/* QUERY_SRC_CD='rawSQL' */
Regards
DjThere is no Enterprise Edition of SSMS. There is SSMS Basic and SSMS Complete. Prior to 2012 sp1, only SSMS Basic were available with Express Edition - but as of 2012 sp1 Expredd also offers SSMS Complete. SSMS Complete is selected bu default when you install
SSMS (unless you are prior to 2012 sp1 and are using Express, of course).
However, even SSMS Basic *should* show Agent assuming you have permissions for that. This is hearsay, but from trusted sources. Here is what to do:
Check what is installed for the machine from where you are running SSMS. You can do that using SQL Server Installation Center - see this blog post: http://sqlblog.com/blogs/tibor_karaszi/archive/2011/02/10/what-does-this-express-edition-look-like-anyhow.aspx
(towards the end).
On that machine try both this problematic account as well as an account which is sysadmin. Does the sysadmin account see Agent? If so, you know permissions aren't granted properly. If not, then you know the tool is the problme.
Also try the problematic account from a machine where you know you see Agent normally. Again, this will help you assess whether the problem is the tool (SSMS) or permissions for the account.
Tibor Karaszi, SQL Server MVP |
web | blog -
Help! SQL server database log file increasing enormously
I have 5 SSIS jobs running in sql server job agent and some of them are pulling transactional data into our database over the interval of 4 hours frequently. The problem is log file of our database is growing rapidly which means in a day, it eats up 160GB of
disk space. Since our requirement dont need In-point recovery, so I set the recovery model to SIMPLE, eventhough I set it to SIMPLE, the log
data consumes more than 160GB in a day. Because of disk full, the scheduled jobs getting failed often.Temporarily I am doing DETACH approach
to cleanup the log.
FYI: All the SSIS packages in the job is using Transaction on
some tasks. for eg. Sequence Cointainer
I want a permanent solution to keep log file in a particular memory limit and as I said earlier I dont want my log data for future In-Point recovery, so no need to take log backup at all.
And one more problem is that in our database,the transactional table has 10 million records in it and some master tables have over 1000 records on them but our mdf file
size is about 50 GB now.I dont believe that this 10 million records should make it to 50GB memory consumption.Whats the problem here?
Help me on these issues. Thanks in advance.And one more problem is that in our database,the transactional table has 10 million records in it and some master tables have over 1000 records on them but our mdf file
size is about 50 GB now.I dont believe that this 10 million records should make it to 50GB memory consumption.Whats the problem here?
Help me on these issues.
For SSIS part of question it would be better if you ask in SSIS forum although noting is going to change about logging behavior. You can increase some space on log file and also should batch your transactions as already suggested
Regarding memory question about SQL Server, once it utilizes memory is not going to release unless there is windows OS faces memory pressure and SQLOS asks SQL Server to trim down its memory consumption. So again if you have set max server memory to some
where near 50 SQL Server will utilize that much memory eventually. So what you are seeing is totally normal. Remember its costtly task for SQL Server to release and take memory so it avoids it by caching as much as possible plus it caches more so as to avoid
physical reads which are costly
When log file is getting full what does below transaction return
select log_reuse_wait_desc from sys.databases where name='db_name'
Can you manually introduce chekpoint in ETL query. Try this it might help you
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Amending script to read list of computers, run script and output to log file
Hello all,
I have cobbled together a script that runs and does what I want, now I would like to amend the script to read a list of computers rather than use the msg box that it is currently using for the strcomputer, if the computers doesn't respond to a ping, then
log that, if it does continue with the script and when it is complete, log a success or failure. I have just started scripting and would really appreciate some help on this one,thanks. I created the script to fix an SCCM updates issue and failing task sequences,
so it may prove useful to others.
There are msg box entries that can be removed that were originally in there for the user running the script.
'setting objects
Dim net, objFSO, shell
Dim objFile, strLine, intResult
Set objnet = CreateObject("wscript.network")
Set objFSO = CreateObject("scripting.filesystemobject")
Set objshell = CreateObject("wscript.shell")
strfile = "c:\wuafix\wuafix.vbs"
strUser = "domain\user"
strPassword = "password"
'getting server name or IP address
strComputer=InputBox("Enter the IP or computer name of the remote machine on which to repair the WUA agent:", "Starting WUA Fix")
'check to see if the server can be reached
Dim strPingResults
Set pingExec = objshell.Exec("ping -n 3 -w 2000 " & strComputer) 'send 3 echo requests, waiting 2secs each
strPingResults = LCase(pingExec.StdOut.ReadAll)
If Not InStr(strPingResults, "reply from")>0 Then
WScript.Echo strComputer & " did not respond to ping."
WScript.Quit
End If
'Check if source file exists
If Not objFSO.FileExists(strFile) Then
WScript.Echo "The source file does not exist"
WScript.Quit
End If
MsgBox "The WUA Fix is in process. Please wait.", 64, "Script Message"
'mapping drive to remote machine
If objFSO.DriveExists("Z:") Then
objnet.RemoveNetworkDrive "Z:","True","True"
End If
objnet.MapNetworkDrive "Z:", "\\" & strComputer & "\c$", True
'creating folder for install exe on remote machine
If (objFSO.FolderExists("Z:\wuafix\") = False) Then
objFSO.CreateFolder "Z:\wuafix"
End If
'copying vbs to remote machine
objFSO.CopyFile strFile, "Z:\wuafix\wuafix.vbs"
'set command line executable to run a silent install remotely
strInstaller1 = "cscript.exe c:\wuafix\wuafix.vbs"
'strInstaller2 = "c:\wuafix\wuafix.vbs"
strExec = "c:\pstools\PsExec.exe "
'objshell.Run strExec & " \\" & strComputer & strInstaller1
On Error Resume Next
result = objshell.Run(strExec & " \\" & strComputer & " " & strInstaller1)
If Err.Number = 0 Then
WScript.Echo "PSXEC Runing WUA fix remotely"
Else MsgBox Err.Number
MsgBox result
End If
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer & "\root\cimv2")
Set colLoggedEvents = objWMIService.ExecQuery _
("SELECT * FROM Win32_NTLogEvent WHERE Logfile = 'Application' AND " _
& "EventCode = '4'")
Wscript.Echo "Event Viewer checked and Fix Applied:" & colLoggedEvents.Count
MsgBox "Removing mapped drive Please wait.", 64, "Script Message"
If objFSO.DriveExists("Z:") Then
objnet.RemoveNetworkDrive "Z:","True","True"
End If
MsgBox "The WUA Fix has been applied.", 64, "Script Message"
quit
wscript.quit
Any help appreciated and explanations on the process would be great as I would like to learn the process involved, which is difficult when working during the day.
many thanksHi Bill,
long story short, I have approx. 2800 clients with an old entry in WMI for updates that the sccm client cannot clear or run because they do not exist anymore, so the client will not run updates or use a task sequence because of this, so my script fixes this
and does a couple of other things, I have found another way to do this by running a different script that uses WMI to call a cscript function that uses the wuafix.vbs that is coped to the machine, I am also changing the echo entries to output to a log
file instead so that I can track what client has run the fix andn which ones haven't.
If you have any suggestions then please let me know, nothing nefarious :)
many thanks
Maybe you are looking for
-
Using shortcuts in Item Help Text
Hello everyone, I have a problem using shortcuts in Help Text sections of items. It says in the help "Item help supports shortcuts using "SHORTCUT_NAME" syntax." but it seems not. In the shortcuts sections of the shared components, it doesn't says th
-
SYNCing or copying everything on iphone to itunes
syncing or copying everything on iphone to itunes?
-
Can i move kindle books on my desktop to my ipad?
hi i have a host of kindle (.mobi) books on my mac. how can i sync these to the Ipad kindle? James
-
Door and staging area not determined automaticaly in IBD
Dear All , Kindly guide as Door, staging area determination is not happening automatically after inbound delivery creation. currently assignment is being carried out manually , Attached screen shots for your kind perusal. Thanks Jinoy
-
Do I delete all cookies? I don't understand and I'm scared to try anything in case I loose important data.