Agent Login to another extension

Dears
We are using IPCC 7.1 ,CCM 4.2.3 with CVP 3.1, now when the agent is logged to EXT xxxx and the Same agent tried to login to another extension but the error message (agent with id xx is alreday logged on to instrument xx to use insturment zz pls log out first) we changed the registry key to permit to login to another Ext and terminate the first session under the CTIOS server as below((KEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems Inc.\CtiOs\<CTIOS InstanceName>\<CTIOSServerName>\ EnterpriseDesktopSettings\All Desktops\Login\ConnectionProfiles\Name\RejectIfAlreadyLoggedIn"=0) but its not working

Did you recycle the services after making the registry change?
david

Similar Messages

  • Can't move UCCX agent to another extension

    I have a UCCX 7 system integrated with UCM 7.1.3.  I'm trying to move a UCCX agent from one extension to another extension.  Both of the phones are associated with the RM application user, and with the agent's end user entry.  I originally had the agent configured for extension 3606 and they were able to log into Cisco Agent Desktop.  I changed the IPCC extension value in their end user entry to extension 3607, and then had the agent try to log in at that station.  CAD gave the error that the extension was not associated with their userid. 
    Do I need to restart some service to get this change to take effect?
    Thanks for any help,
    Robert Luechtefeld

    try to restart cisco ldap synic service from windows services
    good luck
    if helpful Rate

  • Redirect Call to Another Extension not answering - No Agent License

    Hi there,
    We are trying to create a simple script, the main issue is if this script could be achieved without using agent licenses. The script is defined as follows:
    - Working Days from  8:00 am - 14:00 pm ----> Redirect Call to an Extension (Parameter_1)
    - Working Days from 16:00 pm - 19:00 pm ----> Redirect Call to an Extension (Parameter_1) if busy or not available redirect to another extension (Parameter_2)
    - NOT Working Days (Saturday and Sundays only) + Working Days rest of hours ----> Redirect Call to an Extension (Parameter_3) 
    The problem is how can I redirect a call to another extension if the first extension is not available without using agent license.
    Thank you in advance....

    Correct.
    You set a timeout on the step, this timeout value needs to be less than the time required for the line to forward or an answering machine to pick up. 10 seconds I believe is the default and is generally acceptable for the task.
    From there, your logic will depend on the Timeout branch; as you might imagine this indicates the consult transfer timed out and the other end did not pick up prior to the timeout value in seconds.
    Tanner Ezell
    www.ctilogic.com

  • Agent Login Logout Activity report extensions are all blank

    Hi there,
    We are running UCCX ver  8.5.1.11003-32. When we run the Agent Login Logout Activity report the extensions are all blank as seen below.
    Anyone know why this would be?
    Thanks
    Alexis

    In case anyone comes across this.
    This is a bug, resolved in UCCX 8.5.1SU4
    Cheers
    Alexis

  • Looking for and SQL query to match CTI OS agent login ID with the Directory Number (instrument)

    Hi All,
    I am looking for an SQL query to request the HDS database to find out which Directory Number / instrument  was associated with a specific CTI OS agent login ID.
    Has anyone done such a query before ?
    Thanks and Regards
    Nick

    Hi,
    this should work in 8.0 and 8.5:
    SELECT
    ag.PeripheralNumber AS [LoginID],
    al.Extension,
    al.LogoutDateTime
    FROM [instance]_hds.dbo.Agent_Logout al
    JOIN [instance]_awdb.dbo.Agent ag ON al.SkillTargetID = ag.SkillTargetID
    Of course, replace [instance] with the ICM instance.
    The query returns a table with three columns, first is the login ID aka PeripheralNumber, Extension is... well, the agent's extension, and LogoutDateTime is the timestamp when the agent logged out.
    G.

  • How to login into another BO from my BO

    Hi
    My requirement is to login into another BO from a link in my BO without asking user to enter uername and password.
    Can you pls help me to know how this can be done.
    Thanks
    Regards
    Amit

    siteminder configuration requires you to set up a web agent and web server which must be 6.x only.
    You may be interested in using trusted authentication which doesn't have any such limitations. Look for the directions in the admin guide or business objects articles above. For siteminder you can enable HTTP_HEADER and the user param is usually smuser. You can also use trusted auth for any otyher authentication mechanism IIS, Oracle, you name it...
    Regards,
    Tim

  • HT204053 how do i move page and numbers documents from one icloud login to another?

    how do i move page and numbers documents from one icloud login to another?
    I had to change my email address whcih meant new apple login.
    I have a number of docs in iwork/pages and iwork/numbers.  How do I transfer them to my new login?

    There's a couple of ways but my tip backing up your documents in the cloud is as good as any.

  • HR runtime error on agent login/logout

                       Good afternoon.
    Has anyone run in a a runtime error when running agent login/logout reports? I am unable to run this report.
    a runtime error occurred while executing the inquiry. i know there used to be bugs on this but.
    uccx, ha, 8.5.1. i have included the log. Thank you for any assistance.

    I removed my deployments from the remote OC4J server and removed deployment entries from http-web-site.xml and server.xml. I redeployed my simpleJSP bibean application to my local and remote OC4J server. It works locally but fails now with this new error:
    javax.servlet.jsp.JspException: BIB-10310 An unknown exception occurred.
    BIB-10101 Handler failed to handle UserObject.
    oracle.bali.ewt.elaf.windows.WindowsEWTPagingComponentUI
         at oracle.dss.addins.jspTags.PresentationTag.doStartTag(PresentationTag.java:254)
         at simpleJSP.jspService(_simpleJSP.java:72)
         [SRC:/simpleJSP.jsp:6]
         at com.orionserver[Oracle9iAS (9.0.2.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:508)
    Regards,
    Dan

  • NAC Agent Login Dialog Not Appearing - ISE 1.1.1 issue ?

    Agent Fails to Initiate Posture Assessment
    The NAC agent is properly installed on a Windoes 7 , IE 9 machine, the certificates from ISE ADM PRI are installed in trustable certificate store in the client machine but is a selfsigned ISE certificate.
    The reports / USER / Profiling report says the Provisioning Agent has completed the assessment ok.
    The redirected URL is working fine (SEE Evidence)
    We are always prompted to install the NAC agent again or looking at the additional prompted information wait for the NAC agent to load and complete.
    The operations status remains with postering status pending forever and nothing else happens.
    Symptoms or Issue
    The agent login dialog box does not appear to the user following client provisioning.
    Conditions Cisco Says this issue can generally take place during the posture assessment phase of any user
    authentication session.
    Cisco Advises as Possible Causes There are multiple possible causes for this type of issue. See the following
    Resolution descriptions for details of what was already tested by us and please see the atached files for your switch configuration and evidences. .
    CISCO SUGGESTED POSSIBLE CAUSES AND RESOLUTIONS
    Resolution • Ensure that the agent is running on the client machine. ALL TESTED OK
    • Ensure that the Cisco IOS release on the switch is equal to or more recent than
    Cisco IOS Release 12.2.(53)SE. - OK
    • Ensure that the discovery host address on the Cisco NAC agent or Mac OS X
    agent is pointing to the Cisco ISE FQDN. (Right-click on the NAC agent icon,
    choose Properties, and check the discovery host.) - OK (See evidence)
    • Ensure that the access switch allows Swiss communication between Cisco ISE
    and the end client machine. Limited access ACL applied for the session should
    allow Swiss ports: ALL CONFIGURED as CISCO GUIDELINES OK (SEE EVIDENCE)
    • If the agent login dialog still does not appear, it could be a certificate issue.
    Ensure that the certificate that is used for Swiss communication on the end client
    is in the Cisco ISE certificate trusted list. (ALL CHECKED OK SEE EVIDENCE)
    • Ensure that the default gateway is reachable from the client machine. (TESTED OK)

    Hi.
    Can you paste all the ACLs on your switch especially the webauth redirect ACL which should deny traffic towards the PSN.
    regards
    Zubair

  • Auto Login to another page with BPM username/password

    Hi,
    I would like to use the same username and password (with which i logged into BPM workspace) to login to another web page automatically.
    I created an ADF page for one of the tasks in BPM.I have a button in my ADF page which opens up a new page. When a new page is opened, it is asking for username and password. This username and password is same as the the one i used to login to workspace.
    When i click on this button, can i open the web page without entering the credentials?
    Thanks,
    Lakshmi.

    Thanks. The problem is that I can't put it after the APEX form, because I need to have it in the middle of page content. And the whole page content is in the APEX form. I tried using </form> here i inserted my code <form> to end and start again the APEX form but it did not work for IE.

  • Web Based Agent Login

    We have a testbed setup with follwing components...
    icm - 7.2 (duplexed)
    cucm - 6.1 ( cluster of 3, 1 pub & 2 sub )
    crs - 5.0 (load balancing)
    Presently agent login with customized windows application which has been integrated with the ctios server, but Customer wants agent login through web application. Please tell me any additional components are required from Cisco, any changes required in the existing contact centre setup.
    Please help us.
    Thanks
    Sindhuravi

    IP phone agent login process:
    The agent selects the services button on the phone and selects the IP phone service.
    The browser in the IP phone sends an HTTP request to the Tomcat web server.
    The Tomcat web server receives the HTTP request and sends it to the IP phone service.
    The IP phone service communicates with the IP phone agent server through Java ORB.
    Using the IP address argument, the IP phone agent server checks whether the agent is already in the list of agents logged in through the IP phone service. If the agent is logged in, IP Phone Service returns the states screen or otherwise returns a login screen.

  • How to check Agent login details in a particular CTIOS

    How to check Agent login details in a particular CTIOS

    Yes, you'll need to provide more information.  If you login a supervisor to the CTIOS supervisor desktop who is part of every team you would be able to tell every agent who is logged in and what state they are in.
    david

  • MAXL ERROR - 1013145 - Invalid agent login id

    All,
    We are trying to automate the process of data load and Calculations using Maxl. Unfortunately we see the below mentioned error while performing the calculation in MAXL.
    MaxL command:
    execute calculation app.dbname.test;
    ERROR - 1013145 - Invalid agent login id
    But while executing the same command in Maxl editor, it works fine.
    Regards,
    Nainitha.

    Are you doing a stop and/or start app command(or disconnect users) anywhere near while executing the mentioned calc scripts/data loads? I have seen on some occasions that these errors also come up due to stale ESSSVR processes in the background (rare, although possible)
    As an example, you might be logged in as admin ID but however, if anywhere there might be a MAXL command and or activity that is causing the app to disconnect users/sessions (idle of course) before running the calcs. This error might be the result of that?
    All this is assuming that the security set up for the admin ID is correct, right?
    Also, since you mentioned that this error is coming only on Data exports/calc scripts. I am assuming this error comes up only when Essbase is trying to output a file to the drive/path. Does the OS environment login/ID credentials have that authority?
    From whatever i could deduce of this, this might be happening because of either one of two reasons :
    1.) Security is not setup correctly for that operation to complete (export to that path might not be authorized?)
    2.) The user ID is being logged off/disconnected before that operation kicks off.
    Thanks and regards,
    Harsh Warikoo

  • Agent Login Logout timestamps in the database

    Dears,
    In our UCCE environment we need a detailed report that generates information about the agents login and logout times.
    Does anyone have any idea in which table in the database we can view these timestamps?
    Best regards,
    Lara Noueir

    Dear Lara,
    you can get these detaills from Agent_Event_detail table
    you will be getting login date and time from Agent_Event_Detail table along with the duration of the event.
    also agent log out table will give you the logon duration and log out date and time.
    you can refer the ICM DB schema further info.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_8_5_3/reference/guide/icm853schema.pdf
    Rate the post if it usefull.
    Regards,
    Shalid K.C

  • Workflow Agent login failure

    Hi Everybody,
    I m following KFI process for Invoice Processing.The document image is successfully loaded into UCM and display in IPM search criteria.But the thing is that when ever i m watching Documentrouting in EM ,there is no instance created .
    IPM logs:Workflow Agent login failure
    Please guide me how to solve this one.
    With Regards
    Jyoti

    Hi Everybody,
    Actually imaging.ear was missing.It has solved with the patch installation for soa suite 11.1.1.3 in linux machine.
    Thnx for co-operation.
    With Regards
    Jyoti

Maybe you are looking for